• Korean Journal of Acupuncture
• /
• v.24 no.2
• /
• pp.193-216
• /
• 2007

Objectives : The aim of this study was to examine the effect of electroacupuncture (EA) at the PC8 on normal human beings by using power spectral analysis. Methods : EEG (Electroencephalogram) power spectrum exhibits site-specific and state-related differences in specific frequency bands. In this study, power spectrum was used as a measure of complexity. 32 channels EEG study was carried out in 20 subjects (20 males; age=26.8 years old). Results : In ${\alpha}(alpha)$ band, the power values at F7, F8, P3 channels(p<0.05) during the $PC_8-acupoint$ treatment significantly decreased. In ${\beta}(beta)$ band, the power values at F4, F8, P3 channels(P<0.05) during the PC8-acupoint treatment significantly decreased. In ${\delta}(delta)$ band, the power values at F7, F8, P3 Po2 channels(p<0.05) during the $PC_8-acupoint$ treatment significantly decreased. In ${\theta}(theta)$ band, the power values at F7, Fz, F4 F8, FTC1, FTC2, CP2, TT2, P3, Pz, Po2 channels(p<0.05) during the PC8-acupoint treatment significantly decreased. Conclusions : This results suggest that Electroacupuncture at the PC8 mostly affect the change on theta(11 channels) bands.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.380-386
• /
• 2002

Damage behaviors induced in silicon carbide by an impact of particle having different material and size were investigated. Especially, the influence of the impact velocity of particle on the cone crack shape developed was mainly discussed. The damage induced by spherical impact was different depending on the material and size of particles. Ring cracks on the surface of specimen were multiplied by increasing the impact velocity of particle. The steel particle impact produced larger ring cracks than that of SiC particle. In the case of high velocity impact of SiC particle, radial cracks were produced due to the inelastic deformation at the impact site. In the case of the larger particle impact, the damage morphology developed was similar to the case of smaller particle one, but a percussion cone was farmed from the back surface of specimen when the impact velocity exceeded a critical value. The zenithal angle of cone cracks developed into SiC material decreased monotonically with increasing of the particle impact velocity. The size and material of particle influenced more or less on the extent of cone crack shape. An empirical equation, $\theta$= $\theta$$\sub$st/, v$\sub$p/(90-$\theta$$\sub$st/)/500 R$\^$0.3/($\rho$$_1$/$\rho$$_2$)$\^$$\frac{1}{2}$/, was obtained as a function of impact velocity of the particle, based on the quasi-static zenithal angle of cone crack. It is expected that the empirical equation will be helpful to the computational simulation of residual strength in ceramic components damaged by the particle impact.

• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.619-623
• /
• 2000

Alumina membrane was prepared by sol-gel coating method using boehmite powder(${\Upsilon}-AlOOH$). The supported and the unsupported alumina membrane were fabricated to investigate the phase transformation and change of microstructure. It is important to control the homogeneous pore size and distribution in application of filtering process. The ${\theta}-to\;{\alpha}-AL_2O_3$ phase transformation (XRD) and the change of microstructure was investigated using scanning electron microscopy(SEM). XRD patterns showed that the supported membrane had $100^{\circ}C$ higher ${\theta}-to\;{\alpha}-AL_2O_3$ transformation temperature compared to the unsupported membrane. The similar effect was also observed for microstructural change of the membrane.

• Restorative Dentistry and Endodontics
• /
• v.9 no.1
• /
• pp.81-87
• /
• 1983

The purpose of this study was to observe and identify the phases of amalgam and to know the transformation of microstructure in the set amalgam by lapse of time. In this study, shofu spherical-D alloy was used. After trituration of amalgam alloy and mercury (Wig-L-Bug), it was filled in the stone dies. This specimens being polished and etched by usual method was observed under optical microscope using metallurgical microscope. And then X-ray diffractometer was used to analyze the phases contents and transformation of microstructure at $2{\frac{1}{2}}$ hours, 15 hours, 28 hours and 2 years after being amalgamated. The following results were obtained: 1. Shofu spherical-D alloy powder was composed of ${\gamma}$ phase, ${\epsilon}$phase and Ag-Cu eutectic phases. 2. ${\gamma}_2$ phases were appeared at $2{\theta}$ values ($32.0^{\circ}$ and $43.8^{\circ}$) in the amalgam which was analyzed at $2{\frac{1}{2}}$ hours and 15 hours after trituration with mercury. 3. In the amalgam at 28 hours, ${\gamma}_2$ phase was found at $2{\theta}$ value ($43.8^{\circ}$) at 35 hour, $r_2$ phase was appeared at $2{\theta}$ value $32.0^{\circ}$. 4. No ${\gamma}_2$ phases were observed in the 2 years old amalgam. But ${\eta}$ ($Cu_6Sn_5$) phases were found at $2{\eta}$ values $29.4^{\circ}$ and $42.4^{\circ}$.

• Journal of Computing Science and Engineering
• /
• v.5 no.3
• /
• pp.210-222
• /
• 2011

In this work, we study the problem of privacy-preservation data publishing in moving objects databases. In particular, the trajectory of a mobile user in a plane is no longer a polyline in a two-dimensional space, instead it is a two-dimensional surface of fixed width $2A_{min}$, where $A_{min}$ defines the semi-diameter of the minimum spatial circular extent that must replace the real location of the mobile user on the XY-plane, in the anonymized (kNN) request. The desired anonymity is not achieved and the entire system becomes vulnerable to attackers, since a malicious attacker can observe that during the time, many of the neighbors' ids change, except for a small number of users. Thus, we reinforce the privacy model by clustering the mobile users according to their motion patterns in (u, ${\theta}$) plane, where u and ${\theta}$ define the velocity measure and the motion direction (angle) respectively. In this case, the anonymized (kNN) request looks up neighbors, who belong to the same cluster with the mobile requester in (u, ${\theta}$) space: Thus, we know that the trajectory of the k-anonymous mobile user is within this surface, but we do not know exactly where. We transform the surface's boundary poly-lines to dual points and we focus on the information distortion introduced by this space translation. We develop a set of efficient spatiotemporal access methods and we experimentally measure the impact of information distortion by comparing the performance results of the same spatiotemporal range queries executed on the original database and on the anonymized one.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1171-1177
• /
• 1999

The changes on microstucture of recombinated gels with different ratio of amylose(A) and amylopectin(AP) which were isolated from nonwaxy rice starch were investigated by scanning electron microscope(SEM) and X-ray diffractometer. As the concentration of amylose was above 3%(1.08% of soluble amylose) in the amylose suspension, gel matrix became like a three-dimensional network. The microstructure of amylose gels showed a network including macroporous structure, but the higher the ratio of amylopectin content were, the firmer network were formed. In case of A/AP mixed gels(15%) with different amylose/amylopectin percent ratios ; 0/5, 5/10, 10/5, 15/0%, as the storage time of gels and the percent ratio of amylose content were increased, network was formed harder with thick films. While X-ray diffractograms of waxy rice starch which contained 100% amylopectin showed A type, those of purified amylose and amylopectin showed V type and amorphous patterns, respectively. Amylose(3%) gels added $2{\sim}3%$ amylopectin and A/AP mixed gels(15%) showed peak at $2{\theta}\;=\;17.0^{\circ}$which were shown B type crystallinity similar af retrograded starches. Also as the percent ratio of amylose content in mixed gels was increased, peak intensity wat increased.

• Journal of Magnetics
• /
• v.9 no.2
• /
• pp.52-59
• /
• 2004

As deposited and annealed MTJs with the structure of $Ta(5 nm)/Cu(10 nm)/Ta(5 nm)/Ni_{80}Fe_{20}(2 nm)/Cu(5 nm)/ Ir_{25}Mn_{75}(10 nm)/Co_{70}Fe_{30}(2.5 nm)/Al-O/Co_{70}Fe_{30}(2.5nm)/Ni_{80}Fe_{20}(t)/Ta(5nm)/Ni_{80}Fe_{20}(t)/Ta(5 nm)$, where t=10, 30, 60 and 100 nm were characterized by XRD and magnetic hysteresis loops measurements. The XRD measurements were done in grazing incidence $(GID scan-2{\theta})$ and ${\theta}-2{\theta}$ geometry, by rocking curve $(scan-{\omega})$ and pole figures in order to establish correlation between texture and crystallites size and magnetic parameters of exchange biased and interlayer coupling. The variations of shifting and coercivity field of free and pinned layers after annealing in $300^{\circ}C$ correlate with the improvement of ［111］ texture and grains size of $Ni_{80}Fe_{20}$ and $Ir_{25}Mn_{75}$ respectively. The exchange biased and the coercivity fields of the pinned layer linearly increased with increasing grain size of $Ir_{25}Mn_{75}$, The reciprocal proportionality between interlayer coupling and coercivity fields of the free layer and grain size of $Ni_{80}Fe_{20}$ was found. The enhancement of interlayer coupling between pinned and free layers, after annealing treatment, indicates on the correlated in-phase roughness of dipolar interacting interfaces due to increase of crystallites size of $Ni_{80}Fe_{20}$.

• Journal of the Korean Magnetics Society
• /
• v.3 no.2
• /
• pp.143-148
• /
• 1993

$Bi_{x}Dy_{3-x}Al_{1}Fe_{4}O_{12}$(x=1, 1.2, 1.5) magnetic garnet films were fabricated on the glass substrates by pyrolysis method. As the Bi content was increased, the saturation magnetization increased from 5 emu/cc to 11 emu/cc and all the films showed perpendicular magnetic anisotropy. As the content of Bi was increased, Faraday rotation angle (${\theta}_F$) at 780 nm of the films increased from $0.11^{\circ}/\mu\textrm{m}$ to $0.20^{\circ}/\mu\textrm{m}$ and the garnet crystallization temperature decreased from $660^{\circ}C$ to $630^{\circ}C$. Also, the coercivity ($H_{c}$) decreased from 1200 Oe to 600 Oe and the grain sizes increased. $H_{c}$ decreased from 1750 Oe to 1200 Oe and ${\theta}_F$ increased due to the interference of the reflected laser light as the thickness of the films increased from $2000\;{\AA}$ to $4000\;{\AA}$.

• Journal of the korean society of oceanography
• /
• v.33 no.4
• /
• pp.146-156
• /
• 1998

Hydrographic data retrieved in the southwestern part of the East Sea in 1992-1993 were analyzed to investigate the probability of southward intrusion of the East Sea Intermediate Water (ESIW) into the Ulleung Basin. The ESIW showed the ranges of 1 to 4$^{\circ}$C in potential temperature, 33.80-34.06 psu in salinity, and 26.9-27.3 kg/m$^3$ in potential density (${\sigma}$$_{\theta}$). The mean depth occupied by the ESIW was 170 m, where the characteristic values of the above three were 2.64$^{\circ}$C , 34.02 psu, and 27.13 kg/m$^3$, respectively. One of the most prominent features of the ESIW was that its salinity changed not only seasonally but also interannually. It was low in summer and high in winter. The salinity within the isopycnal layer of 26.9-27.3 kg/m$^3$ was closely related with the potential vorticity (${\rho}$$_{\theta}^{-1}$ f ${\varrho}$${\rho}_{\theta}$/${\varrho}$z), being in direct proportion to the salinity. This implies that the low-salinity water was thicker than the high-salinity water. The flow path of the ESIW was investigated by tracking the low-salinity or the low-potential vorticity water and by referring to acceleration potential. Careful analysis of the flow path proves that the ESIW intrudes from the north between the Korean coast and Ulleung Island into the Ulleung Basin in summer. Existence of the high-potential vorticity water in the Ulleung Basin is associated with the interruption of the inflow of low-salinity water.

• Ocean Science Journal
• /
• v.40 no.2
• /
• pp.67-78
• /
• 2005

Complex physical, chemical and biological interactions off the Korean coast created several striking patterns in the phytoplankton blooms, which became conspicuous during the measurements of ocean color from space. This study concentrated on analyzing the spatial and temporal aspects of phytoplankton chlorophyll variability in these areas using an integrated dataset from a Sea-viewing Wide Field-of-view Sensor (SeaWiFS), Advanced Very High Resolution (AVHRR) sensor, and Conductivity Temperature Depth (CTD) sensor. The results showed that chlorophyll concentrations were elevated in coastal and open ocean regions, with strong summer and fall blooms, which appeared to spread out in most of the enclosed bays and neighboring waters due to certain oceanographic processes. The chlorophyll concentration was observed to range between 3 and $54\;mg\;m^{-3}$ inside Jin-hae Bay and adjacent coastal bays and 0.5 and $8\;mg\;m^{-3}$ in the southeast sea offshore waters, this gradual decrease towards oceanic waters suggested physical transports of phytoplankton blooms from the shallow shelves to slope waters through the influence of the Tsushima Warm Current (TWC) along the Tsushima Strait. Horizontal distribution of potential temperature $(\theta)$ and salinity (S) of water off the southeastern coast exhibited cold and low saline surface water $(\theta and warm and high saline subsurface water $({\theta}>12^{\circ}C; S>34.4)$ at 75dBar, corroborating TWC intrusion along the Tsushima Strait. An eastward branch of this current was called the East Korean Warm Current (EKWC), tracked with the help of CTD data and satellite-derived sea surface temperature, which often influenced the dynamics of mesoscale anticyclonic eddy fields off the Korean east coast during the summer season. The process of such mesoscale anticyclonic eddy features might have produced interior upwelling that could have shoaled and steepened the nutricline, enhancing phytoplankton population by advection or diffusion of nutrients in the vicinity of Ulleungdo in the East Sea.