• Journal of Korean Society of Steel Construction
• /
• v.8 no.3 s.28
• /
• pp.127-137
• /
• 1996

Connections as basic elements and an integrated part of a steel frame has an effect on the frame's performance. Conventional analysis and design techniques are based on either idealized fixed or pinned conditions. In fact, the use of rigid or pinned connection model in steel frame analysis serves the purpose of simplifying the analysis and design processes, but all connections used in current pratice possess stiffness and transfer moment which fall between the extreme cases of fully rigid and ideally pinned. To predict the behavior of the semi-rigid steel frames, it is necessary to predict the moment-rotation behavior of the beam-to-column connections. In this research, prediction equation for moment-rotation behavior of the beam-to-column connection is suggested and the effect of design parameters has investigated. Prediction model, in a nondimensional form shows the moment-rotation characteristic for connections. It is composed of the curve fitting power function using standardization constant K and 4 parameter $KM_o$, ${\theta}_0$, b, n based on the pretest result about moment-rotation behavior of connection.

• Journal of the Korean Society of Safety
• /
• v.21 no.6 s.78
• /
• pp.14-19
• /
• 2006

This study performed burst tests using real-scale pipe elbow containing simulated local wall-thinning to evaluate the effects of circumferential thinning angle and bending load on the failure pressure of wall-thinned elbow. The tests were carried out under the loading conditions of internal pressure and combined internal pressure and bending loads. Three circumferential thinning angles, ${\theta}/{\Pi}=0.125,\;0.25,\;0.5$, and different thinning locations, intrados and extrados, were considered. The test results showed that the failure pressure of wall-thinned elbow decreased with increasing circumferential thinning angle for both thinning locations. This tendency is different from that observed in the wall-thinned straight pipe. Also, the failure pressure of intrados wall-thinned elbow was higher than that of extrados wall-thinned elbow with the same thinning depth and equivalent thinning length. In addition, the effect of bending moment on the failure pressure was not obvious.

• Korean Journal of Biological Psychiatry
• /
• v.18 no.1
• /
• pp.36-45
• /
• 2011

Objectives : Though a proportion of Alzheimer's disease(AD) patients treated with donepezil have shown positive response on cognition, but the responders' characteristics are still uncertain. This study attempts to identify whether a single oral dose of donepezil(5mg) can change cognition and the relationship between single dose responder items and long-term responder are examined. Methods : Twenty-three AD patients for single donepezil challenge study group and eleven AD patients for controls were participated in the study. Seven days after baseline study for neuropsychological test and EEG, same studies were rechecked after donepezil medication in study group. In donepezil study groups, 12 weeks after donepezil medication, neuropsychological test and EEG were rechecked. Results : After single donepezil challenge, forward digit span, Rey-Osterrieth Complex Figure Test copy, SVLT delayed recall were significantly improved, and beta spectra power in anterior, theta spectra power in posterior field were significantly decreased. According to linear regression analysis, forward digit span after single donepezil challenge was significantly positive correlated with long-term responders. Conclusions : This study suggests that single donepezil medication can significantly change cognitive functions and EEG in AD patients. Among these responsive items, forward digit span was significantly correlated with long-term responder.

• Journal of applied mathematics & informatics
• /
• v.29 no.3_4
• /
• pp.529-546
• /
• 2011

A deterministic tuberculosis model for theoretically assessing the potential impact of the combined effects of case detection in the presence of treatment is formulated. The qualitative features of its equilibria are analyzed and it is found that the disease-free equilibrium may not be globally asymptotically stable when the reproduction number is less than unity. This disease threshold number is further used to assess the impact of active TB case finding alone and in conjunction with treatment. A critical threshold parameter ${\Theta}$ say for which case detection will have a positive impact is derived. Using the Centre Manifold theory, the model may exhibit the phenomenon of backward bifurcation (coexistence of a locally stable endemic equilibrium with a stable disease-free equilibrium) when the reproduction number is less than unity. It is shown that the possibility of backward bifurcation occurring decreases with increase case detection. Graphical representations suggest that increase in case finding accompanied by treatment of detected TB cases, result in a marked decrease of TB cases (both latent and active TB).

• Journal of Mechanical Science and Technology
• /
• v.18 no.1
• /
• pp.92-105
• /
• 2004

A new algorithm for planning a collision-free path based on algebraic curve is developed and the concept of collision-free Path Space (PS) is introduced. This paper presents a Geometry Mapping (GM) based on two straight curves in which the intermediate connection point is organized in elliptic locus ($\delta$, $\theta$). The GM produces two-dimensional PS that is used to create the shortest collision-free path. The elliptic locus of intermediate connection point has a special property in that the total distance between the focus points through a point on ellipse is the same regardless of the location of the intermediate connection point on the ellipse. Since the radial distance, a, represents the total length of the path, the collision-free path can be found as the GM proceeds from $\delta$=0 (the direct path) to $\delta$=$\delta$$\_$max/(the longest path) resulting in the minimum time search. The GM of elliptic workspace (EWS) requires calculation of interference in circumferential direction only. The procedure for GM includes categorization of obstacles to .educe necessary calculation. A GM based on rectangular workspace (RWS) using Cartesian coordinate is also considered to show yet another possible GM. The transformations of PS among Circular Workspace Geometry Mapping (CWS GM) , Elliptic Workspace Geometry Mapping (EWS GM) , and Rectangular Workspace Geometry Mapping (RWS GM), are also considered. The simulations for the EWS GM on various computer systems are carried out to measure performance of algorithm and the results are presented.

• Geomechanics and Engineering
• /
• v.14 no.1
• /
• pp.29-42
• /
• 2018

This paper presents the results of an empirical study in which square rock-like blocks containing two parallel pre-existing rough non-persistent joints were subjected to uniaxial compression load. The main purpose of this study was to investigate uniaxial compressive strength and deformation modulus of jointed specimens. Response Surface Method (RSM) was utilized to design experiments and investigate the effect of four joint parameters, namely joint roughness coefficient (JRC), bridge length (L), bridge angle (${\gamma}$), and joint inclination (${\theta}$). The interaction of these parameters on the uniaxial compressive strength (UCS) and deformation modulus of the blocks was investigated as well. The results indicated that an increase in joint roughness coefficient, bridge length and bridge angle increased compressive strength and deformation modulus. Moreover, increasing joint inclination decreased the two mechanical properties. The concept of 'interlocking cracks' which are mixed mode (shear-tensile cracks) was introduced. This type of cracks can happen in higher level of JRC. Initiation and propagation of this type of cracks reduces mechanical properties of sample before reaching its peak strength. The results of the Response Surface Methodology showed that the mutual interaction of the joint parameters had a significant influence on the compressive strength and deformation modulus.

• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.115-125
• /
• 2017

For many stroke patients undergoing rehabilitation therapy, there is a need for indicator for evaluating the body function in paretic and non-paretic regions of stroke patients quantitatively. In this paper, the function of muscles and cells in paretic and non-paretic regions of severe and mild hemiplegic stroke patients was evaluated using multi-channel bioelectrical impedance spectroscopy. The paretic and non-paretic regions of severe and mild stroke patients were quantitatively assessed by using bioelectrical impedance parameters such as prediction marker (PM), phase angle (${\theta}$), characteristic frequency ($f_c$), and bioelectrical impedance vector analysis (BIVA). The mean values of impedance vector were significantly discriminated in all comparisons (severe-paretic, severe-non-paretic, mild-paretic, and mild-non-paretic). The bioelectrical impedance parameters were proved to be a very valuable tool for quantitatively evaluating the paretic and non-paretic regions of hemiplegic stroke patients.

• Journal of Korea Multimedia Society
• /
• v.23 no.2
• /
• pp.204-215
• /
• 2020

People who have sleep disorders such as insomnia take a long time to get to sleep, namely sleep latency. In order to reduce it, effective stimulations and environments to induce sleep such as ASMR or pink noise are necessary. However these have different effects and preferences for each individual. Therefore customized service and control for the sleep induction will be provide to him/her. In this paper, we proposed SIS control system which provides selectively sound control among various kinds of ASMR and pink noise according to sleep state measured from brain wave data for an individual. In order to verify the effectiveness of the system, we had conducted totally 30 experiments for 5 people, and all EEG data measured from all the people during sleep. An average of 3.7 hours was spent per experiment. In comparison experiments with and without sound control for sleep induction, the latency time was reduced by an average of 8 minutes as well as delta waves and theta waves, which appear only in deep sleep, are increased by 21%.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.446-455
• /
• 1994

An experimental study is conducted for the turbulent recirculating flow behind a backward-facing step when the oscillating jet is issued sinusoidally through a thin slit at the separation edge. Two key parameters are dealt with in the present experiment, i.e., the amplitude of forcing and the forcing frequency. The Reynolds number based on the step height is varied from 25,000 to 35,000. In order to investigate the effect of local forcing, turbulent structures are scrutinized for both the flow of forcing and the flow of no forcing. The growth of shear layer with a local forcing is larger than that of no forcing. The influence of a local forcing brings forth the decrease of reattachment length and the particular frequency gives a minimum reattachment length. The most effective frequency depends on the non-dimensional frequency, St/sub .theta./, based on the momentum thickness at the separation point. A comparative study leads to the conclusion that the large-scale vortical structure is strongly associated with the forcing frequency and the natural flow instability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.203-203
• /
• 2010

Nano-crystalline Si thin films were deposited on polymer and glass by inductively coupled plasma (ICP) - assisted RF magnetron sputtering at low temperature in an argon and hydrogen atmosphere. Internal ICP coil was installed to increase hydrogen atoms dissociated by the induced magnetic field near the inlet of the working gases. The microstructure of deposited films was investigated with XRD, Raman spectroscopy and TEM. The crystalline volume fraction of the deposited films on polymer was about 70% at magnetron RF power of 600W and ICP RF power of 500W. Crystalline volume fraction was decreased slightly with increasing magnetron RF power due to thermal damage by ion bombardment. The diffraction peak consists of two peaks at $28.18^{\circ}$ and $47.10^{\circ}\;2{\theta}$ at magnetron RF power of 600W and ICP RF power of 500W, which correspond to the (111), (220) planes of crystalline Si, respectively. As magnetron power increase, (220) peak disappeared and a dominant diffraction plane was (111). In case of deposited films on glass, the diffraction peak consists of three peaks, which correspond to the (111), (220) and (311). As the substrate temperature increase, dominant diffraction plane was (220) and the thickness of incubation (amorphous) layer was decreased.