• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.9
• /
• pp.1399-1406
• /
• 2015

The purpose of this study was to investigate the antioxidant activity of Korean traditional soy sauce and its relationship with physicochemical properties. Seventeen samples of soy sauce prepared by using a Korean traditional method were obtained from six provinces of Korea. The most powerful antioxidant activity of soy sauce was ranging from 8.96 to 63.39% for 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, from 0.12 to 2.41 AE mg/mL for ferric reducing antioxidant power (FRAP) value, and from 8.42 to 115.69 TE mg/mL for oxygen radical absorbance capacity (ORAC). Protease activity and total polyphenol contents were highly correlated with antioxidant activities such as DPPH radical scavenging activity and FRAP value (R=0.97). The contents of amino nitrogen were also correlated with DPPH radical scavenging activity (R=0.92), FRAP (R=0.93), and ORAC values (R=0.80). Based on these results, antioxidant activities were highly influenced by protease activity, contents of total polyphenols, and amino nitrogen.

• Solar Energy
• /
• v.20 no.2
• /
• pp.55-65
• /
• 2000

Better electrical and optical properties of ITO thin films were demanded for the window layer of CdS/CdTe solar cells. To match that demand, an ion beam sputtering system was used for the deposition of ITO thin films. The substrate temperature and ion beam energy were controlled to deposit high quality ITO thin films in two cases of Ar ion sputtering and Ar+$O_2$ ion sputtering. The microstructure changed from domain structure in ITO deposited by Ar ions to grain structure in ITO deposited by Ar+$O_2$ ions. The lowest resistivity of ITO films was $1.5\times10^{-4}{\Omega}cm$ at $100^{\circ}C$ substrate temperature in case of Ar ions sputtering. Transmittance in the visible range was over 80% above $100^{\circ}C$ substrate temperature.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.104-104
• /
• 2001

Purpose： In this study, we investigated the possible motor pathways of hemiplegic stroke patients usin combined TMS and BOLD fMRI approach and evaluated the correlation between TMS a fMRI methods. Method： Four subjects, who demonstrated left hemiplegia after stroke, are included. TMS was performed using a Dantec Mag2 stimulator (Dantec Company, USA) in single puls mode with figure eight-shaped coil. Following TMS localization, The BOLD T2＊-weight images were acquired with echo planar imaging sequence (TR = 1.2 sec, TE = 60 msec, and flip angle = 90). Motor activation was studied by means of a repetitive fing flexion-extension task. The stimulation protocol comprised 10 cycles of alternating activati and rest (10 images per cycle). Total 60 cycles were performed and each cycle take abou 1.5 sec. The resulting images were then analyzed with STIMULATE (CMRR, U, o Minnesota) to generate functional maps using a student t-test (p < 0.0005) and cluste analysis.

• Journal of the Korean Society of Radiology
• /
• v.4 no.2
• /
• pp.27-30
• /
• 2010

A X-ray optical modulator measures x-ray dose using optical transmissivity ratio change of the liquid crystal cell. To apply in this optical modulator, we made photoconductor films and compared electrical properties of this films in this study. Photoconductors are deposited on ITO glass with $200{\mu}m$ using the percipitation method and print method. I-V test was conducted to alalyze electrical properties of this films and measured darkcurrent and SNR was acquired using the measured dark current and sensitivity. As a result of this measurements, $HgI_2$ film made by precipitation method is lower(about 40%) darkcurrent than $HgI_2$ films made by precipitation method and sensitivity is two times greater than print method. And we knew that $HgI_2$ films were also 10~25 times greater SNR at $1v/{\mu}m$ than $PbI_2$, PbO, CdTe film made by precipitation method. This results suggest that $HgI_2$ films made by precipitation method has improved characteristics of x-ray dose meter by applying in x-ray optical modulator.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.268-279
• /
• 1994

The x-ray powtler pattern of single phase $Bi_2S_2CaCu_2O_{8+x}$ has been identified and fullyindexed using a pseudotetragonal subcell with a= 5.408, c = 30.83 $\AA$ and an incommensurate supercellwith reciprocal lattice vector, X$q^*$, given by $q^*=0.211b^*-c^*$. The x -ray powder pattern of the Pb-free110K superconductor phase "$Bi_2S_2CaCu_2O_{10+x}$" has many lines which belong t.o an incommensuratesupercell. Using elect.ron d~ffraction pImt.ographs as a indexing guide, an indexing scheme for the powderpattern has been obtained. The unit cell has a geometrically orthorhombic subcell a=5.411, b= 5.420, c=37.29(2) $\AA$. Supercell reflections have indices that are derived from the subcell k, 1 indices by addition uf$\pm q^*$, where $\pm q^*=0.211b^*-0.78c^*$The incommensurate con~ponent In the b dwection, $\delta$, is the same for both phases but on going from2212 to 2223 phase, the superlattic component in the c direction changes from commensurate($\varepsilon$=1) toincommensurate($\varepsilon$=0.78).X>$\varepsilon$=0.78).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.4
• /
• pp.335-343
• /
• 2009

Antimicrobial resistance patterns of Vibrio species isolated from brackish water in Geoje, Tongyeong and Goseong, Gyeongsangnamdo province into which streams, sewage and leachate all flowed. Only 19 strains (10.7%) of 177 V. parahaemolyticus were susceptible to 15 antimicrobials. 146 strains (69.5%) proved resistant against more than one antimicrobial and 12 strains (6.8%) were multi-drug resistant. The resistance rate of 152 strains were 85.9% against AM and 26.6% against RA, 16.4% against AN, 13.6% against Sand 13.0% against TMP. 86 strains of 129 V. cholerae non-O1 (66.7%) were susceptible to antimicrobials and 31 strains (24.0%) were resistant to more than one antimicrobial and 12 strains (9.3%) were multi-drug resistant. The antimicrobial resistance rate of 129 strains against 15 antimicrobials, with the exception of C, CIP, E and GM, i.e. 11 antimicrobials, was 0.7-16.2%, 16.2% of 129 strains proved resistant against RA and 13.9% against AM, 9.3% against TMP, 7.7% against SXT and 6.9% against TE. 19 of 49 strains of V. mimicus (38.8%) were susceptible to antimicrobials and 31 strains (61.2%) were resistant against more than one antimicrobial; none of the strains were multi-drug resistant. 15 strains of V. mimicus were resistant against only RA, AmC and TE. The resistance rate was 59.2% against RA (highest) 4.1% against AmC and 2.0% against TE.

• Journal of the Korean Society of Radiology
• /
• v.3 no.4
• /
• pp.29-33
• /
• 2009

Recently, the compound materials(a-Se, $HgI_2$, PbO, CdTe, $PbI_2$, etc.) that are used in flat panel x-ray imager have been studied for digital x-ray imaging. In this paper, the signal detection properties of $HgI_2$ and a-Se conversion layer, are compared. The thick $HgI_2$ film is fabricated by special particle-in-binder method and the conventional vacuum thermal evaporation is used for a deposition of a-Se film. And an electrical characteristic measurements were investigated about leakage current, signal response property and x-ray sensitivity. From the experimental results show that the $HgI_2$ film has a low operation voltage and high signal generation than that of a-Se.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.547-554
• /
• 2004

We investigated a LiNbO$_3$ based integrated-optic polarization controller with the Ti-indiffused waveguide along the z-axis utilizing the electro-optic effect. The device consists of a first quarter-wave (λ / 4) followed by a half-wave (λ / 2) and a second quarter-wave (λ / 4) wave-plate. We analyzed the amount of phase change and the transformation of the polarized mode as a function of the combination of wave-plates and of their applied voltages. The operation has been systematically measured utilizing a polarimeter and Poincare sphere. We confirmed that the fabricated device controls the transformations from any arbitrary input state of polarization (SOP) into any general output SOP.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.28.2-28.2
• /
• 2009

군사적, 산업적 용도로 널리 활용되고 있는 적외선 검출기는 InSb, HgCdTe(MCT)와 같은 물질들을 감지 소자로 사용하고 있다. 현재 가장 많이 사용되는 MCT는 적외선의 전 영역을 감지할 수 있는 장점이 있지만, 대면적 제작이 어려운 단점이 있다. 이에 비해 InSb는 안정적인 재료의 특성, 높은 전하이동도($1.2\times10^6\;cm^2/Vs$) 그리고 대면적 소자 제작의 가능성 등이 높게 평가되어 차세대 적외선 검출소자로 각광 받고 있다. InSb 적외선 수광 소자는 1970년대부터 미국을 중심으로 이온주입, MOCVD 또는 MBE와 같은 다양한 공정을 이용하여 제작되어 왔으며, 앞으로도 군수용 제품을 비롯하여 산업전반에서 더욱 각광을 받을 것으로 예상된다. 하지만 InSb는 77 K에서 0.225 eV의 상대적으로 작은 밴드갭을 갖고 있기 때문에 누설전류로 인한 성능저하가 고질적인 문제로 대두되었고, 이를 해결하기 위한 고품질 절연막 연구가 InSb 적외선 수광 소자 연구의 주요 이슈 중 하나가 되어왔다. PECVD, photo-CVD, anodic oxidation 등의 공정을 이용하여 $SiO_2$, $Si_3N_4$, 양극산화막(anodic oxide) 등 다양한 물질들에 대한 연구가 진행되었고[1,2], 산화막과 반도체 계면에서의 열확산을 억제하여 계면트랩밀도를 최소화하기 위한 연구도 활발히 이루어졌다[3]. 하지만 InSb 소자의 성능개선을 위한 최적화된 산화막에 대한 연구는 여전히 불충분한 실정이다. 본 연구에서는 n형 (100) InSb 기판 (n = 0.2 ~ $0.85\times10^{15}cm^{-3}$ @ 77 K)을 이용하여 양극산화막, $SiO_2$, $Si_3N_4$ 등을 증착하고 절연막으로서 이들의 특성을 비교 분석하였다. 양극산화막은 상온에서 1 N KOH 용액을 이용하여 양극산화법으로 증착하였으며, $SiO_2$, $Si_3N_4$는 PECVD로 $150^{\circ}C$에서 $300^{\circ}C$까지 온도를 변화시켜가며 증착하였다. SEM분석과 XPS분석으로 두께의 균일도와 절연막의 조성, 계면확산 정도를 확인하였으며, I-V와 C-V 커브측정을 통해 각 절연막의 전기적 특성을 평가하였다. 이 분석들을 통해 각각의 공정 조건에 따른 절연막의 상태를 전기적 특성과 관련지어 설명할 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.3
• /
• pp.1-5
• /
• 2000

A waveguide of coupled optical modulator was fabricated on LiNbO$_3$ based on proton exchange with self-aligned thin film electrode method. The electrode pattern was designed using a self-aligned method. After proton exchange process, the waveguide was prepared by annealing process. The initial crossover state of the fabricated 2$\times$2 coupled optical modulator was observed with controlling the annealing process variables and the structure of self-aligned thin film electrodes. It was shown form the present work that the measured crosstalk is -29.5[dB] and 8.0[V] of detected modulating voltage.