• Journal of the Korean Ceramic Society
• /
• v.45 no.10
• /
• pp.579-583
• /
• 2008

A porous $Al_2O_3$, scaffold coated with tricalcium phosphate(TCP) was fabricated by replica method using polyurethane(PU) foam as a fugitive material. Successive coatings of $Al_2O_3$ and hydroxyapatite(HAp) were applied via dip coating onto polyurethane foam, which has a slender and well interconnected network. A porous structure was obtained after sequentially burning out the foam and then sintering at $1500^{\circ}C$. The HAp phase was changed to TCP phase at high temperature. The scaffold showed excellent interconnected porosity with pore sizes ranging from $300{\sim}700{\mu}m$ in diameter. The inherent well interconnected structural feature of PU foam remained intact in the fabricated porous scaffold, where the PU foam material was entirely replaced by $Al_2O_3$ and TCP through a consecutive layering process. Thickness of the $Al_2O_3$ base and the TCP coating was about $7{\sim}10{\mu}m$ each. The TCP coating was homogeneously dispersed on the surface of the $Al_2O_3$ scaffold.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.585-589
• /
• 2011

Purpose: Microcirculation of diabetic patients is commonly comporomised, regardless of the condition of the macrocirculation. Therefore, direct tissue oxygenation measurement is recommended in determining tissue viability and predicting wound healing potential. This study was designed to determine cut-off value of the tissue oxygenation in predicting wound healing in diabetic foot patients. Methods: This study included 41 feet of 41 diabetic foot patients who were treated in the Diabetic Wound Center of author's institution between January and June, 2009. Main inclusion criteria were type 1 or 2 diabetes and a foot ulcer (duration > 3 weeks) and ulcer area (from 1 $cm^2$ to 4 $cm^2$). Measurements of the area of diabetic foot ulcer were carried out before treatment. Transcutaneous oxygen pressure ($TcpO_2$) was measured at adjacent site of ulcer. The healing wound was defined as complete wound closure within 12 weeks. Results: Average diabetic foot ulcer areas with healing and nonhealing wounds were $2.67{\pm}0.76$ and $2.59{\pm}0.75\;cm^2$, respectively. There was no significant difference in the wound area between the groups. Average foot $TcpO_2$ in healing and nonhealing wounds were $68.56{\pm}23.07$ and $30.98{\pm}16.66$ mmHg, respectively ($p$ <0.01). The rate of healing wound increased as $TcpO_2$ increased. In particular, $TcpO_2$ lower than 40 mmHg and higher than 40 mmHg showed the most significant difference (wound healing rates of 25% and 71%, respectively). Conclusion: Based on the results of the study, the minimal $TcpO_2$ value thought to be required for adequate wound healing in diabetic wounds (cut-off value) is 40 mmHg.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.495-500
• /
• 2008

Purpose: Adequate tissue oxygenation is considered as an essential factor for wound healing. In the non-diabetic population, an uncompromised macrocirculation generally leads to adequate tissue oxygenation. On the contrary, the macrocirculation in diabetic patients may not correlate with tissue oxygenation because of structural changes in the capillary basement membrane. Nevertheless, many medical professionals in Korea rely on macrocirculation evaluation when predicting wound healing potential of the diabetic ulcers. The purpose of this study is to compare reliability of two common macrocirculation assessment methods, Doppler probing and CT angiography, on tissue oxygenation in diabetic foot patients. Methods: Doppler and CT angiography scores were given according to the patency of the anterior and posterior tibial arteries. Tissue oxygenation was measured by transcutaneous partial oxygen tension($TcpO_2$). Doppler and CT angiography scores were statistically analyzed against $TcpO_2$ values. Sixty-eight diabetic foot ulcer patients were included in this study. Results: The test was carried out on Doppler score and $TcpO_2$ variables displayed a p-value of 0.0202, and concluded that the two variables were statistically dependent. The test used to determine for linear trends between Doppler scores and $TcpO_2$ variables displayed a p-value of 0.0149, displaying statistical linear trend between the two variables. On the contrary, the tests between CT angiography scores and $TcpO_2$ variables showed p-values of 0.1242 and 0.6590, that means no correlation between CT angiography and $TcpO_2$ scores. Conclusion: Doppler probing is more reliable than CT angiography in predicting tissue oxygenation of diabetic foot ulcers.

• Korean Journal of Acupuncture
• /
• v.23 no.1
• /
• pp.15-36
• /
• 2006

Objectives . The aim of this study was to examine the effect of electroacupuncture(EA) at the ST36 on normal humans by using power spectral analysis. Methods : EEG(Electroencephalogram) power spectral exhibits site-specific and state-related differences in specific frequency bands. In this study, power spectrum was used as a measure of complexity. 32 channel EEG study was carried out in 12 subjects (10 males; age=26.7 years old, 2females; age=28 years old). Results ; In ${\alpha}$ (alpha) band, the power values at Fp2, F7, F3, Fz, FTC1, FTC2, T3, C3, Cz, C4, TT1, TCP1, CP1, CP2,T5, P3, Pz, P4, Po1, Po2, O1, Oz,O2 channels(p<0.05) during the ST36-acupoint treatment were significantly increased. In ${\beta}$ (beta) band, the power values at Fp2, F7, F3, Fz, F4, F8, FTC1, FTC2, T3, C3, Cz, C4, TT1, TCP1, CP1, CP2, T5, P3, Pz, P4, Po1, Po2, O1, Oz, O2 channels(p<0.05) during the ST36-acupoint treatment were significantly decreased. In ${\delta}$ (delta) band, the power values at F7, Fz, T3, C3, TT1, TCP1, CP1, CP2, T5, P3, Pz,T6, Po1, PO2,O1, Oz, O2 channels(p<0.05) during the ST36-acupoint treatment were significantly decreased. In ${\theta}$(theta) band, the power values at F7, Fz, FTC1, T3, TCP1, CP2, TCP2, Po1, Po2 channels(p<0.05) during the ST36-acupoint treatment were significantly decreased. ${\alpha}$/${\beta}$ values at Cz, T5, O1, Oz, O2 channels during the ST36-acupoint treatment were increased. ${\beta}$/${\theta}$ values at Fpl, F7, F3, Fz, F4, F8, FTC1, FTC2, T3, C3, C4, T4, TT1, TCP1, TCP2, TT2, P3, P4, T6, Pol channels during the ST36-acupoint treatment were increased. Conclusions : This results suggest that Electroacupuncture at the ST36 mostly affects the charge on alpha(23 channels), beta(25 channels) bands.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.148-154
• /
• 2010

We have fabricated $SiO_2$ oxidation thin films by TCP-CVD (transformer coupled plasma chemical vapor deposition) method for passivation layer of OLED (organic light emitting diode). The purpose of this paper is to control and estimate the deposition rate and refracive index characteristics with process parameters. They are power, gas condition, distance of source and substrate and process temperature. The results show that transmittance of thin films is over 90%, rapid deposition rate and stable reflective index from 1.4 to 1.5 at controled process conditions. They are $SiH_4$ : $O_2$ = 30 : 60 [sccm] gas condition, 70 [mm] distance of source and substrate, no-biased substrate and under 80 [$^{\circ}C$] process temperature.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4052-4058
• /
• 2012

The composite photocatalyst, N-$TiO_2$ loaded with $Ni_2O_3$, was prepared by $N_2$ plasma treatment. X-ray diffraction, X-ray fluorescence, $N_2$ adsorption, UV-vis spectroscopy, photoluminescence, and X-ray photoelectron spectroscopy were used to characterize the prepared $TiO_2$ samples. The results indicated that the band gap energy was decreased obviously by nitrogen doping, whereas loading of $Ni_2O_3$ did not influence the band gap and visible light absorption. The photocatalytic activities were tested in the degradation of 2,4,6-trichlorophenol (TCP) under visible light. The photocatalytic activity and stability of composite photocatalyst were much higher than that of catalyst modified with nitrogen or $Ni_2O_3$ alone. The synergistic effect of doping nitrogen and $Ni_2O_3$ over $TiO_2$ was investigated.

• Archives of Plastic Surgery
• /
• v.41 no.6
• /
• pp.668-672
• /
• 2014

Background Negative-pressure wound therapy (NPWT) is believed to accelerate wound healing by altering wound microvascular blood flow. Although many studies using laser Doppler have found that NPWT increases perfusion, recent work using other modalities has demonstrated that perfusion is reduced. The purpose of this study was to investigate the influence of NPWT on tissue oxygenation of the foot, which is the most sensitive region of the body to ischemia. Methods Transcutaneous partial pressure of oxygen ($TcpO_2$) was used to determine perfusion beneath NPWT dressings of 10 healthy feet. The sensor was placed on the tarso-metatarsal area of the foot and the NPWT dressing was placed above the sensor. $TcpO_2$ was measured until it reached a steady plateau state. The readings obtained at the suction-on period were compared with the initial baseline (pre-suction) readings. Results $TcpO_2$ decreased significantly immediately after applying NPWT, but gradually increased over time until reaching a steady plateau state. The decrease in $TcpO_2$ from baseline to the steady state was 2.9 to 13.9 mm Hg (mean, $9.3{\pm}3.6$ mm Hg; $13.5{\pm}5.8%$; P<0.01). All feet reached a plateau within 20 to 65 minutes after suction was applied. Conclusions NPWT significantly decrease tissue oxygenation of the foot by 2.9 to 13.9 mm Hg. NPWT should be used with caution on feet that do not have adequate tissue oxygenation for wound healing.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3671-3676
• /
• 2013

A series of carbon nanotube, $C_{60}$, and graphene modified $TiO_2$ nanocomposites were prepared by hydrothermal method. X-ray diffraction, $N_2$ adsorption, UV-Vis spectroscopy, photoluminescence, and Electrochemical impedance spectra were used to characterize the prepared composite materials The results reveal that incorporating $TiO_2$ with carbon materials can extend the adsorption edge of all the $TiO_2$-carbon nanocomposites to the visible light region. The photocatalytic activities were tested in the degradation of 2,4,6-trichlorophenol (TCP) under visible light. No obvious difference in essence was observed in structural and optical properties among three series of carbon modified $TiO_2$ nanocomposites. Three series of carbon materials modified $TiO_2$ composites follow the analogous tentative reaction mechanism for TCP degradation. GR modified $TiO_2$ nanocomposite exhibits the strongest interaction and the most effective interfacial charge transfer among three carbon materials, thus shows the highest electron-hole separation rate, leading to the highest photocatalytic activity and stability.

• Journal of Korea Game Society
• /
• v.2 no.1
• /
• pp.23-29
• /
• 2002

Multicast protocols are efficient methods of group communication such as video conference, Internet broadcasting and On-Line Game, but they do not support the various transmission protocol services like a reliability guarantee, FTP, or Telnet that TCPs do. The Purpose or this Paper is to find a method to utilize multicast routers can simultaneously transport multicast packets and TCP packets. For multicast network scalability and error recovery the existing SRM(Scalable Reliable Multicast)method has been used. Three packets per TCP transmission control window site are used for transport and an ACK is used for flow control. A CBR(Constant Bit Rate) and a SRM is used for UDP traffic control. Divided on whether a UDP multicast packet and TCP unicast packet is used simultaneously or only a UDP multicast packet transport is used, the multicast receiver with the longest delay is measured on the number of packets and its data receiving rate. It can be seen that the UDP packet and the TCP's IP packet can be simultaneously used in a server router.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.53.2-53.2
• /
• 2011

Ti metal has superior mechanical properties along with biocompatibility, but it still has the problem of bio-inertness thus forming weaker bond in bone/implant interface and long term clinical performance as orthopaedic and dental devices are restricted for stress shielding effect. On the other hand, despite the excellent biodegradable behavior as being an integral constituent of the natural bone, the mechanical properties of ${\beta}$-tricalcium phosphate $(Ca_3(PO_4)_2;\;{\beta}-TCP)$ ceramics are not reliable enough for post operative load bearing application in human hard tissue defect site. One reasonable approach would be to mediate the features of the two by making a composite. In this study, ${\beta}$-TCP/Ti ceramic-metal composites were fabricated by spark plasma sintering in inert atmosphere to inhibit the formation of $TiO_2$. Composites of 30 vol%, 50 vol% and 70 vol% ${\beta}$-TCP with Ti were fabricated. Detailed microstructural and phase characteristics were investigated by FE-SEM, EDS and XRD. Material properties like relative density, hardness, compressive strength, elastic modulus etc. were characterized. Cell viability and biocompatibility were investigated using the MTT assay and by examining cell proliferation behavior.