• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.7
• /
• pp.282-287
• /
• 2003

″H″ type resonator has the advantage for the miniaturization of high-T7 superconducting (HTS) microstrip antenna in comparison with the conventional microstrip antenna such as rectangular type or circular type. In this paper we designed miniaturized HTS antennas using this "H"-type resonator and reported the characteristics of our antennas including return loss, bandwidth, radiation patterns, efficiency and so on. To fabricate the "H" type antenna, HTS YBa$_2$Cu$_3$$O_{7-x}$ (YBCO) thin films were deposited on MgO substrates using rf-magnetron sputtering. For comparison between normal conducting antennas and superconducting antennas, the gold antennas with the same dimension were also fabricated. An aperture coupling was used for impedance matching between 50 $\Omega$ feed line and HTS radiating patch. The ″H" type superconducting antenna showed the performance of 1.38 in SWR, 26 % in efficiency, and 13.8 dB in the return loss superior to the normal conducting counterpart.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1311-1312
• /
• 2006

This paper describes the ohmic contact formation between a TiW film as a contact material deposied by RF magnetron sputter and polycrystalline 3C-SiC films deposied on thermally grown Si wafers. The specific contact resistance (${\rho}_c$) of the TiW contact was measured by using 4he C-TLM. The contact phase and interfacial reaction between TiW and 3C-SiC at high-temperature were also analyzed by XRD and SEM. All of the samples didn't show cracks of the TiW film and any interfacial reaction after annealing. Especially, when the sample was annealed at $800^{\circ}$ for 30min., the lowest contact resistivity of $2.90{\times}10^{-5}{\Omega}{\cdot}cm^2$ of was obtained due to the improved interfacial adhesion.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1490-1492
• /
• 2003

A new type of piezoelectric transformer using radial vibration of disk, poled with the same direction is proposed. The piezoelectric ceramics was composed to PZT-PMN-PSN. The surface ratio of driving electrode and generating electrode of the piezoelectric transformer ranges from 1.4:1 to 3:1. As a experimental result, both resonance frequency and step-up voltage ratio increased with increasing load resistance. The step-up voltage ratio was reached more than 60 times under no load resistance. The maximum efficiency of 97.7% at load resistance of 2k${\Omega}$ was obtained.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.9
• /
• pp.713-717
• /
• 2011

This paper was carried out design of 600 V GaN power MOSFET Modeling. We decided trench gate type one for design. we carried out device and process simulation with T-CAD tools. and then, we have extracted optimal device and process parameters for fabrication. we have analysis electrical characteristics after simulations. As results, we obtained 600 V breankdown voltage and $0.4\;m{\Omega}cm^2ultra$ low on resistance. At the same time, we carried out field ring simulation for obtaining high voltage.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.623-624
• /
• 2007

This work examines the effects of swelling MI type HVDC cable oil on the semiconductive silicone rubber and silicone rubber as used in accessories for application on outdoor termination (EBA) slip on sleeve. The behavior of volume resistivity is monitored as a function of the amount of cable oil diffused into the material. Resistivities of semiconductive silicone samples up to the typical insulator range (${\sim}10^{10}{\Omega}-cm$) are observed as a consequence of swelling due to the presence of the diffused oil. The measured volume resistivities of the oil-impregnated semiconductive silicone rubber are compared to desired value as function of stress relief cone.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.4
• /
• pp.129-137
• /
• 1996

In this paper, we simulated a radiation pattern directivity of microstrip patch antenna for 9[GHz] using the computer. It is analyzed and compared the directivity of field characteristics at two different aspects. One is that of 1-dimension and 2-dimension array, the other is that of a linear and planar array antenna. We tried the constants for the simulation of teflon substrate, dielectric constant ${\varepsilon}r=2.50$, ground plane conductor thickness t=0.03556, substrate height h=0.72188, dielectric loss degree $tan{\delta}$=0.00085, characteristics impedence of line $Zo=50({\Omega})$. The major advantage of microstrip patch antenna is that the arrangement of antenna is associated with the directivity and effectiveness. We have been studied the difference of the radiation pattern of antenna with wave variety through computer simulation.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1007-1009
• /
• 1993

In this paper, The hybrid method in order to reduce the unknown varible for 3D eddy current calculation is proposed. we adopt the current vector potential(T) and the magnetic scalar potential($\Omega$) as field variable, and adopt image charge method for symetric boundary condition in BEM. We apply the hybrid method to electromagnet for levitation system and analyze the charateristics of eddy current airgap flux distribution, attractive and magnetic drag force according to velocity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.406-407
• /
• 2006

This paper describes the ohmic contact formation between a TiW film as a contact material deposied by RF magnetron sputter and polycrystalline 3C-SiC films deposied on thermally grown Si wafers. The specific contact resistance (${\rho}_c$) of the TiW contact was measured by using the C-TLM. The contact phase and interfacial reaction between TiW and 3C-SiC at high-temperature were also analyzed by XRD and SEM. All of the samples didn't show cracks of the TiW film and any interfacial reaction after annealing. Especially, when the sample was annealed at $800^{\circ}$ for 30min., the lowest contact resistivity of $2.90{\times}10^{-5}{\Omega}cm^2$ was obtained due to the improved interfacial adhesion.

• Korean Journal of Metals and Materials
• /
• v.48 no.3
• /
• pp.268-275
• /
• 2010

A new approach is described for preparing AlN thin films containing various amounts of Co content by using a two-facing targets type sputtering (TFTS) system. The deposited films were annealed isothermally at different temperatures and their microstructure, magnetic properties and resistivity were investigated. A small saturation magnetization ($4{\pi}Ms=0.52{\sim}0.85kG$) was observed irrespective of Co content in the asdeposited films. It was found that annealing conditions can control physical properties as well as the microstructure of the films. A high saturation magnetization (3.7 kG) and resistivity of $2200{\mu}{\Omega}-cm$ was obtained for AlN films containing 25 at.% Co.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.1
• /
• pp.76-81
• /
• 2007

This paper deals with the characteristics of a small scale $high-T_c$ superconducting(HTSC) levitation system. The levitation tester. which models after electrodynamic suspension(EDS) maglev, consists of one HTSC magnet, a reaction plate, and force measuring components. Instead of moving magnet, AC current was applied to the fixed HTSC magnet. The magnet also has persistent current switch(PCS). The inductance of the magnet was 18.5 mH and total joint resistance of the magnet was $5.74{\times}10^{-7}\Omega$. AC current was applied into the HTSC magnet with various frequencies and the levitation force was calculated and measured. According to the increase of the vehicle speed, the levitation force was saturated.