• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.70-78
• /
• 2000

In applying high-${\underline{T_c}}$ superconducting material to microwave devices, Uncertainty of electromagnetics of high-${\underline{T_c}}$ superconductor(HTS) and the temperature dependence of the substrate fits with HTS thin film cause difficulty in realization of such antenna for industrial applications. It must be noted to characteristic the HTS antenna in contrast with normal conducting counterpart for this real application. In this paper, a comparative study between HTS microstrip antennas and gold antennas was reported in terms of the return loss, the characteristic impedance, efficiency, and other various characteristics. HTS thin films were $YBa_2Cu_3O_{7-x}$ (YBCO) on MgO substrates. Superconducting microstrip antennas used in this work were to directly inset a microstrip transmission line into the 50 ${\Omega}$ region of the radiating patch. Measurement results of HTS antennas and gold antennas showed that usable antennas can be made using this architecture.

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.1
• /
• pp.10-14
• /
• 2008

Differently from BSCCO tapes which are fabricated by powder-in-tube method, the coated conductors are made by the evaporation of YBCO on metal substrate. Due to this structural merit, although the coated conductors are generally used for large current transportation, they are expected to be favorable to the purpose of the fault current limitation as well. In this study, using YBCO coated conductor having copper stabilizer formed by plating technique(produced by Superpower Co.), we investigated the over-current characteristics of the coated conductor. The coated conductors had 85 A $I_c$ and 90 K $T_c$. The resistance of the conductor was 0.93 $m{\Omega}/cm$ at 300 K and 0.17 $m{\Omega}/cm$ at the temperature right above $T_c$. To the coated conductors, we applied the voltages of the range from 150 $V_{rms}$ to 230 $V_{rms}$ and measured the V-I curves using four probe method. From the results, we could analyze the electric behavior of the coated conductor in flux flow state. As the current exceed $I_c$, the currents were distributed into the superconductor and metal stabilizer. The amounts of the currents shared through both current paths were calculated under the assumption that the ,Joule heating was perfectly eliminated by $LN_2$ surrounding the conductor. Finally, the condition for the stable current flowing state which does not affect the conductor was established from the analysis on the over-current characteristics.

• Food Science of Animal Resources
• /
• v.35 no.3
• /
• pp.330-338
• /
• 2015

The effects of dietary supplementation of processed sulfur in pigs according to the level provided during the fattening phase were examined. The pigs were divided into three groups: control (CON), non-sulfur fed pigs; T1, 0.1% processed sulfur fed pigs; T2, 0.3% processed sulfur fed pigs. Physicochemical and sensory properties, as well as meat quality and oxidative stability of the Longissimus dorsi muscle were investigated. The feeding of processed sulfur did not affect moisture and protein contents (p>0.05). However, the crude fat content of T2 was significantly decreased compared to CON (p<0.05), while the pH value of T2 was significantly higher than those of both CON and T1 (p<0.05). Cooking loss and expressible drip of T2 were also significantly lower than that of CON (p<0.05). The redness of meat from T1 was significantly higher than both CON and T2 (p<0.01). During storage, lipid oxidation of the meat from sulfur fed pigs (T1 and T2) was inhibited compared to CON. Examination of omega-3 polyunsaturated fatty acids revealed T2 to have significantly higher content than CON (p<0.05). In the sensory test, the juiciness and overall acceptability of T2 recorded higher scores than CON. This study demonstrated that meat from 0.3% processed sulfur fed pigs had improved nutrition and quality, with extended shelf-life.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.5
• /
• pp.705-711
• /
• 2007

Two novel strains of the Cytophaga-Flexibacter-Bacteroides(CFB) group, designated Gsoil $219^T$ and Gsoil $238^T$, were isolated from soil of a ginseng field of Pocheon Province in Korea. Both strains were Gram-negative, aerobic, nonmotile, nonspore-forming, and rod-shaped. Phylogenetic analysis based on 16S rRNA gene sequences indicated that both isolates belong to the genus Chitinophaga but were clearly separated from established species of this genus. The sequence similarities between strain Gsoil $219^T$ and type strains of the established species and between strain Gsoil $238^T$ and type strains of the established species ranged from 91.4 to 94.7% and 91.6 to 94.2%, respectively. Phenotypic and chemotaxonomic data(major menaquinone, MK-7; major fatty acids, $iso-C_{15:0}\;and\;C_{16:1}\omega5c$; major hydroxy fatty acid, $iso-C_{17:0}3-OH$; major polyamine, homospermidine) supported the affiliation of both strains Gsoil $219^T$ and Gsoil $238^T$ to the genus Chitinophaga. Furthermore, the results of physiological and biochemical tests allowed genotypic and phenotypic differentiation of both strains from the other validated Chitinophaga species. Therefore, the two isolates represent two novel species, for which the name Chitinophaga soli sp. nov.(type strain, Gsoil $219^T=KCTC\;12650^T=DSM\;18093^T$) and Chitinophaga terrae sp. nov.(type strain, Gsoil $238^T=KCTC\;12651^T=DSM\;18078^T$) are proposed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.10
• /
• pp.1451-1457
• /
• 2016

A comparative study was performed to investigate the efficacy of KiFAY as a feed additive on performance parameters, thyroid, and pancreatic hormone levels in broilers. Ninety birds (Vencobb 400) were randomly divided into three groups viz., Control (no DL-methionine supplementation), Treatment1 (containing added DL-methionine) and Treatment 2 (containing KiFAY and without DL-methionine supplementation). The performance parameters (weekly body weight, body weight gain, feed intake, and feed consumption ratio) were recorded and calculated during the whole study of 4 weeks. Analyses of insulin and insulin-like growth factor (IGF 1), triiodothyronine (T3), thyroxine (T4) and thyroid stimulating hormone (TSH) were performed at the end of the study. The results show that birds on supplementation of KiFAY performed significantly (p<0.001) better than other treatments. The weekly body weight, body weight gain, feed in-take and feed consumption ratio improved in KiFAY treated birds. The study found an increase in insulin and IGF1 levels (p<0.001) in KiFAY compared with the other treatments. Serum T3, T4, and TSH levels in the Treatment 2 were higher than other treatments (p<0.001). The KiFAY supplementation was able to improve performance with associated responses at a hormonal level in broilers.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.669-672
• /
• 2004

To improve the operation error caused by the thermal fluctuation of electrons, we propose a novel single-electron pass-transistor logic circuit employing a multiple-tunnel junction (MTJ) scheme and modulate a parameters of an MTJ single-electron tunneling device (SETD) such as the number of tunnel junctions, tunnel resistance, and voltage gain. The operation of a 3-MTJ inverter circuit is simulated at 15 K with parameters $C_g=C_T=C_{clk}=1\;aF,\;R_T=5\;M{\Omega},\;V_{clk}=40\;mV$, and $V_{in}=20\;mV$. Using the SETD/MOSFET hybrid circuit, the charge state output of the proposed MTJ-SETD logic is successfully translated to the voltage state logic.

• Textile Coloration and Finishing
• /
• v.2 no.4
• /
• pp.237-244
• /
• 1990

Syntheses and liquid-Crystallinites of thermotropic copoly (ester amide)s were investigated. The three components melt polycondensation of 4,4'-dicarboxy-$\alpha$, $\omega$-diphenoxyalkane as an A component, 4-4'diacetoxybiphenyl as a B, and p-N-acetoxy-aminobenzoic acid as a C gave the thrmotropic copoly(ester amide)s containing a flexible splacer in the polymer backbone. Diacetylated hydroquinone, methyl hydroquinone, chlorohydroquinone, and phenyl hydroquinone were used as anther B components. A polymer(6BPAB) having 10 mol% of C component and hexamethylene space. showed a typical nematic texture between $245^{\circ}C(T_m)\; and\; more\; than\; 360^{\circ]C(T_i)$. The melting points of the members of this series of polymers increased with decreasing methylene spacer. The polymer structure and mesomorphic nature were examined by solid and solution ^{13}C-NMR4 spectroscopy, cross polarizing microscopy with a hot stage, and X-ray diffactometry.

• Journal of the Korean Mathematical Society
• /
• v.51 no.1
• /
• pp.67-86
• /
• 2014

Based on an expanded mixed finite element method, we consider the semidiscrete approximations of the solution u of the quasilinear pseudo-parabolic equation defined on ${\Omega}{\subset}R^d$, $1{\leq}d{\leq}3$. We construct the semidiscrete approximations of ${\nabla}u$ and $a(u){\nabla}u+b(u){\nabla}u_t$ as well as u and prove the existence of the semidiscrete approximations. And also we prove the optimal convergence of ${\nabla}u$ and $a(u){\nabla}u+b(u){\nabla}u_t$ as well as u in $L^2$ normed space.

• Textile Coloration and Finishing
• /
• v.5 no.2
• /
• pp.109-116
• /
• 1993

Synthesis and liquid-crystallinites of thermotropic polyamides and copolyamides were investigated. Thermotropic polyamides and copolyamides containing a flexible spacer in the backbone were obtained by the two or three components melt polycondensations of 4,4'-dicarboxy-${\alpha}$${\omega}$-diphenoxy alkane as an A components, 4,4'-diacetoamido-3,3' dimethoxybiphenyl as a B, 1,4-diacetoamido-benzene (diacetylated p-phenylenediamine) was used as another amide-group-forming minomer. The content of the amide groups in the thermotropic polyamide and Copolyamide widely varied depending on the structure of the amide-group forming diacetoamido monomers. A polymer (9CLDI) showed a typical nematic texture between 218$^{circle}C$ ($T_m$) and 345$^{circle}C$($T_i$) The melting points of the members of this series of polymers increased with decreasing methylene spacer. The polymer structure and mesmorphic nature were examined by solid and solution ${^13}C$-NMR spectroscopy, cross polarizing microscopy with a hot stage.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.200-205
• /
• 1999

In the ferromagnetic phase with electrons for La$_{1-x}$(Ca or Sr)$_x$MnO$_3$, films, a remnant resistivity of the order of 10$^{-8}$ ${\omega}$m is observed up to 100 K and increases exponentially with temperature up to T$_c$ and above one Tesla as a function of magnetic field strength (a positive magnetoresistivity). The phase below T$_c$ is regarded as a polaronic state with a polaronic tunneling conduction. Possible p-wave condensation (or superconductor) with a parabolic density of states and the phase separation are discussed on the basis of the two-fold degeneracy of ${\varrho}_{\delta}$ orbitals.