• 한국자기학회지
• /
• 제8권4호
• /
• pp.203-209
• /
• 1998

Single phase garmet Y3-xBixFe5O12(x=0.0, 0.25, 0.5, 0.75, 1.0)을 ethylene glycol을 용매로 하여 sol-gel 법으로 합성후 x-ray diffraction, Mossbauer 분광기, vibrating sample magnetometer (VSM)를 이용하여 결정학적 및 자기적 특성을 연구하였다. Y과 Fe의 수화 반응을 통하여 얻은 Y3Fe5O12의 x-ray 회절 분석 결과는 결정구조가 cubic임을 알 수 있었고 Y에 Bi를 치환한 경우 또한 cubic 구조이었으며 Bi의 치환 량이 증가할수록 격자 상수가 선형적으로 증가함을 알수 있었다. Bi를 첨가한 Y3-xBixFe5O12 (x=0.0, 0.25, 0.5, 0.75, 1.0)의 단일상의 garnet이 형성되기 시작하는 온도는 80$0^{\circ}C$이고 secound phase (BiFeO3)가 생성되기 시작하는 온도는 x=0.75는 100$0^{\circ}C$이며 x-1.0은 95$0^{\circ}C$였다. Mossbauer 분광 실험과 VSM측정 결과 Birk 치환 될수록 포화 자화 값과 coercivity값이 감소하는 경향을 보였으며 Curic 온도는 Bi의 치환 양이 증가할수록 약간 증가하는 경향을 보임을 알 수 있었다.

• 한국자기학회지
• /
• 제15권3호
• /
• pp.186-190
• /
• 2005

Co 페라이트 $CoFe_2O_4$에서 Fe의 미량을 Al으로 치환시킨 시료인 $Al_{0.2}CoFe_{1.8}O_4$ 분말과 박막을 sol-gel 방법으로 각각 제조하였다. 이 시료에 대한 열처리 온도에 따른 결정학적 및 자기적 특성의 변화를 비교하기 위하여 X선 회절기, FE-SEM, $M\ddot{o}ssbauer$ 분광기, 진동자력계 등을 이용한 측정을 하였다. 분말 시료를 673K 이상으로 열처리 했을 때 cubic spinel구조가 나타나기 시작하고, 박막 시료는 873 K 이상으로 열처리 했을 때 cubic spinel 구조가 나타나기 시작했다. $M\ddot{o}ssbauer$ 분광 분석을 통해 873 K 이상의 온도로 열처리한 분말시료에서 준강자성 성질이 얻어졌으나 673K로 열처리한 시료는 작은 입자크기 때문에 상자성이 공존하고 473K로 열처리한 시료는 상자성 성질만이 나타났다. VSM 측정에서 분말 시료의 보자력이 673K에서 열처리한 시료까지는 증가하다가 그 이상 열처리한 시료에서는 감소하였으며, 포화자화는 열처리 온도가 높아질수록 계속 증가하였다. 그러나 박막 시료는 873K에서 열처리한 경우 보자력이 1.084kOe이었으나 1073K에서 열처리한 시료의 경우 0.540kOe로 열처리 온도가 증가할수록 보자력이 오히려 감소하였다.

• Korean Chemical Engineering Research
• /
• 제51권2호
• /
• pp.267-271
• /
• 2013

KEPCO 전력연구원에서 개발한 고효율 습식 아민 $CO_2$ 흡수제(KoSol-4)를 적용하여 Test bed 성능시험을 수행하였다. 국내에서는 처음으로 석탄화력발전소에서 발생되는 연소 배가스를 적용하여 하루 2톤의 $CO_2$를 처리할 수 있는 연소 후 $CO_2$ 포집기술의 성능을 확인하였으며 또한 국내에서는 유일하게 공정운전에 소요되는 재생에너지 소비량을 실험적으로 측정함으로써 KoSol-4 흡수제의 성능에 대한 신뢰성 있는 데이터를 제시하였다. 흡수제 순환량 및 재생탑 운전압력을 대상으로 한 변수 실험 결과 Test bed 연속운전은 안정적으로 수행되었고, 흡수탑에서의 $CO_2$ 제거율은 국제에너지기구 온실가스 프로그램(IEA-GHG)에서 제시하는 $CO_2$ 포집기술 성능평가 기준치($CO_2$ 제거율: 90%)를 안정적으로 유지하였다. 또한 흡수제(KoSol-4)의 재생을 위한 스팀 사용량(재생에너지)은 3.0~3.2 GJ/$tCO_2$이 소비되는 것으로 산출되었는데 이는 기존 상용 흡수제(MEA, Monoethanolamine)의 재생에너지 수준(약 4.09 GJ/$tCO_2$, 본 연구) 대비 약 25% 이상 저감된 수치일 뿐만 아니라 우리나라에서 연구 중인 모든 $CO_2$ 포집기술을 통틀어 가장 우수한 성능이다. 본 연구를 통해 KEPCO 전력연구원에서 개발한 KoSol-4 흡수제 및 공정의 우수한 $CO_2$ 포집 성능을 확인할 수 있었을 뿐만 아니라, 향후 고효율 흡수제(KoSol-4)를 상용 $CO_2$ 포집플랜트에 적용할 경우 $CO_2$ 포집비용을 크게 낮출 수 있을 것으로 기대되었다.

• 한국환경과학회지
• /
• 제5권4호
• /
• pp.535-544
• /
• 1996

In the development of Molten Carbonate Fuel Cell, one of the serious problems is the dissolution of cathode material. Therefore, the development of the alternative cathode which is stable in molten carbonate is needed. In this research, the licoo, was chosen as alternative cathode material. $LiCoO_2$ powder was synthesized by high temperature calcination method and by citrate sol-gel method. And its structure and physical iharacteristics were analyzed by XRD, 1 R, TCA and porosimeter. The conductivity and solubility of $LiCoO_2$ electrode were also measured. Homogeneous $LiCoO_2$ Powder was obtained by citrate sol-Rel method at 445$^{\circ}C$, however, obtained above 75$0^{\circ}C$ by high temperature calcination method. Homogeneous particle size distribution and fine powder were obtained by the citrate sol-Rel method. $LiCoO_2$ electrode showed higher electric conductivity ($1.7 $\Omega$^{-1}cm^{-1}$) than NiO (0.1 $\Omega$^{-9} cm^{-1}) at $650^{\circ}C$. The solubilities of $LiCoO_2$ electrode in electrolyte were varies 0.6 to 1.0 ppm during 200 hours. So, the solubilities of $LiCoO_2$ were much lower than that of NiO.

• 한국분말재료학회지
• /
• 제12권6호
• /
• pp.428-432
• /
• 2005

In the present study, silver-doped antibacterial hydroxyapatites were successfully prepared by the sol-gel method. For the starting solution, the molar ratio of $Ca(NO_3)_2{\cdot}4H_2O, P(OC_2H_5)_3,\;C_2H_5OH,\;and\;H_O$ was set to 0.075:0.045:20:0.135; $AgNO_3$ was added to a ratio of Ag to total cation concentration of $0.5-12 mol\%$. The prepared sol was dried at $100^{\circ}C$ for 48h and heat-treated at $1000^{\circ}C$ for 2h to obtain particles in the 200-500nm size range. The product from the synthesis of silver-doped hydroxyapatite was investigated through X-ray diffraction experiments and scanning electron microscopy. The product showed high antibacterial properties, with a disinfection ratio of Staphylococcus aureus (ATCC 6538) and Escherichia coli (ATCC 25922) over $99.9^{\circ}C$ as calculated from an antimicrobial effects evaluation by the shake flask method.

• 대한화학회지
• /
• 제4권1호
• /
• pp.7-9
• /
• 1957

On sparking carbon-arc in water we found that a inflammable gas was generated. The object of this experiment is to prepare sols of metals by applying the gas mentioned to a solution of metallic salts. As the result of this experiment we found that : 1) By this method we can prepare easily some kinds of Ag-sol from $AgNO_3$ solution in about 30 sec. by adjusting the temperature, the quantity of stabilizer and the concentration of metallic salt. 2) The appropriate concentration of $AgNO_3$ is about 0.01% by volume, that of the stabilizer, 0.9104 N-NaOH is 0.03-2 cc/100 cc of 0.01% $AgNO_3$ solution. And the lower the temperature, the more concentrated the Ag-sol. But to check the possibility of applying this method to metals other than Au and Ag, measurement of the particle size and properties of a sol prepared by this method, should be studied. Especially, we must study what kinds of gases are generated by sparking the carbon-arc in water.

• 동굴
• /
• 제76호
• /
• pp.49-55
• /
• 2006

The submicron $YBa_2Cu_3O_x$ powder was prepared by the sol-gel method. The particle size is distributed from 0.2 to 1.0 ${\mu}m$, which benefits to eliminate the micro-cracks formed in the $YBa_2Cu_3O_x$ films deposited by electrophoresis. The powder was single phase of $YBa_2Cu_3O_x$ examined by X-ray diffraction. In the sol-gel process the citrate gel was formed from citric acid and nitrate solution of $Y_2O_3$, $Ba(NO_3)_2$ and CuO. When pH values were adjusted to 6.4-6.7, $Ba(NO_3)_2$ could be dissolved in the citrate solution completely. Appropriate evaporative temperature of the sol-gel formation is discussed. Acetone is used as electrophoreticsolution, in which some water and iodine (0.2 g/1) and polyethylene glycol (2 vol. %) are added. The concentrations of $YBa_2Cu_3O_x$ powders is 20g/l. The thickness of deposited film could be more than 50 ${\mu}m$ in 3 minutes of depositing time. The most EPD films could be 90K zero resistance and the Jc values were over 1000A/cm2 (0 H, 77 K).

• 한국전기전자재료학회논문지
• /
• 제29권1호
• /
• pp.40-43
• /
• 2016

Transparent color coating films were fabricated on a glass substrate by using sol-gel hybrid binder and organic dye. Sol-gel hybrid binder coating film fabricated with PTMS of 0.03 mole showed a very high pencil hardness of 9 H. As the withdrawal speed increased from 1.0 mm/s to 5.0 mm/sec, The yellowness ($b^*$) of coating glass also gradually increased. The transmittance of yellow color coating glass was 82.6% and the haze of coating glass was 0.35%. Red and blue color coating glasses also showed the high transmittance of 62.4% and 80.6% respectively. The surface hardness of color coating films was 6 H.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.776-779
• /
• 2004

The dielectric and electrical characteristics of Ce doped (Ba0.6Sr0.4)TiO3 (BST) thin films were investigated as a function of Ce content. Both atomic force microscopy (AFM) and x-ray diffraction (XRD) analysis showed that increasing the Ce doping ratio causes the decrease in grain size while the surface remains smooth and crack-free. The dielectric properties of the Ce doped BST films were found to be strongly dependent on the Ce contents. The dielectric constant and dielectric loss of the BST films decreased with increasing Ce content. However, it was also found that, compared with undoped films, the increase of Cecontent improves the leakage-current characteristics. The improvement of the electrical properties of Ce-doped BST films may be related to the decrease in the concentration of oxygen vacancies. The figure of merit (FOM) reached the maximum value of 48.9 at the 1 mol % of Cedoping. The dielectric constant, loss factor, and tunability of the 1 mol% Ce doped Ba0.6Sr0.4TiO3 thin films were 320, 0.011, and 46.3%, respectively.

• 한국재료학회지
• /
• 제26권7호
• /
• pp.363-369
• /
• 2016

$NaCaLa_{1-x}(MoO_4)_3:Ho^{3+}/Yb^{3+}$ ternary molybdates with proper doping concentrations of $Ho^{3+}$ and $Yb^{3+}$ (x = $Ho^{3+}+Yb^{3+}$, $Ho^{3+}$ = 0.05 and $Yb^{3+}$ = 0.35, 0.40, 0.45 and 0.50) were successfully synthesized by microwave sol-gel method. Well-crystallized particles formed after heat-treatment at $900^{\circ}C$ for 16 h showed a fine and homogeneous morphology with particle sizes of $3-5{\mu}m$. Under excitation at 980 nm, the UC intensities of the doped samples exhibited strong yellow emissions based on the combination of strong emission bands at 520-nm and 630-nm emission bands in the green and red spectral regions, respectively. The optimal $Yb^{3+}:Ho{3+}$ ratios were obtained at 9:1 and 10:1, as indicated by the composition-dependent quenching effect of the $Ho^{3+}$ ions. The pump power dependence of the upconversion emission intensity and the Commission Internationale de L'Eclairage chromaticity coordinates of the phosphors were evaluated in detail.