• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.3
• /
• pp.231-241
• /
• 1992

To study the relationships between major micrometeorological elements and their influences on evapotranspiration(ET) in the canopy of two rice cultivars, Daecheongbyo and Samgangbyo, synoptic meteorological factors, micrometeorological elements and ET from the canopy and biomass production were observed at various growth stages in the paddy field of Suwon Weather Forcast Office in 1989. ET from the rice community was highly correlated with the following factors in order of pan evaporation>air temperature>leaf temperature>solar radiation>sunshine duration>difference in vapor pressure depicit(VPD)>water temperature. ET observed showed higher correlation with the evaporation from small pan than that from Class A pan. Varietal difference would be noted in the relationships between ET in Samgangbyo canopy and the evaporations observed from the pans, with which closer a correlation was found in Samgangbyo than in Daecheongbyo. The ratio of canopy ET to the evaporation from Class A pan was maintained over 1.0 through the growth stages with the maximum of 1.9 at the late August. The evaporation observed from Class A pan was amounted to 71.9% of that from small pan. ET was better correlated with solar radiation than with net radiation which reached about 66% of solar radiation. Maximum temperature showed higher correlation with ET than mean air temperature, and also wind speed of 1m above ground revealed positive correlation. The relative humidity, however, had no correlation with the exception of ET in rainy days. A regression model developed to estimate ET as a function of meteorological elements being described with $R^2$ of 0.607 as : $ET=-5.3594+0.7005Pan\;A+0.1926T_{mean}+0.0878_{sol}+0.025RH$.

• Journal of Magnetics
• /
• v.11 no.1
• /
• pp.51-54
• /
• 2006

Variation of magnetic properties through Cr substitution for Co in inverse-spinel $CoFe_2O_4$ has been investigated by vibrating-sample magnetometry (VSM) and conversion electron $M\ddot{o}ssbauer$ spectroscopy (CEMS). $Cr_{x}Co_{1-x}Fe_2O_4$ samples were prepared as thin films by a sol-gel method. The lattice constant of the $Cr_{x}Co_{1-x}Fe_2O_4$ samples was found to remain unchanged, explainable in terms of a reduction of tetrahedral $Fe^{3+}$ ion to $Fe^{2+}$ due to substitution of $Cr^{3+}$ ion into octahedral $Co^{2+}$ site. The existence of the tetrahedral $Fe^{2+}$ ions in $Cr_{x}Co_{1-x}Fe_2O_4$ was confirmed by CEMS analysis. Room-temperature magnetic hysteresis curves for the $Cr_{x}Co_{1-x}Fe_2O_4$ films measured by VSM revealed that the saturation magnetization $M_s$ increases by Cr doping. The $M_s$ is maximized when x = 0.1 and decreases for higher x but is still bigger than that of $CoFe_2O_4$. The increase of $M_s$ can be explained partly by the reduction of the tetrahedral $Fe^{3+}$ ion to $Fe^{2+}$.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.23-27
• /
• 2006

By substituting Mn or Cr for Co in inverse spinel $CoFe_2O_4,\;Mn_xCo_{1-x}Fe_2O_4\;and\;Cr_xCo_{1-x}Fe_2O_4$ and thin films were prepared by sol-gel method and their structural and magnetic properties were investigated. X-ray diffraction indicates that the cubic lattice constant increase for the Mn substitution while it hardly changes for the Cr substitution. Substitution of $Mn^{2+}$ for octahedral $Co^{2+}$ sites can explain the increase of lattice constant in $Mn_xCo_{1-x}Fe_2O_4$. On the other hand, Substitution of $Cr^{3+}$ for octahedral $Co^{2+}$ and subsequent reduction of $Fe^{3+}$ ion into $Fe^{2+}$ are expected to happen. Mossbauer spectroscopy measurements on $Cr_xCo_{1-x}Fe_2P_4$ indicate the existence of tetrahedral $Fe^{2+}$ ions that are created through reduction of tetrahedral $Fe^{3+}$ ions in order to compensate charge imbalance happened by $Cr^{3+}$ substitution for octahedral $Co^{2+}$ sites. On the other hand, no $Fe^{2+}$ ions were detected by Mossbauer spectroscopy for $Mn_xCo_{1-x}Fe_2O_4$. A migration of $Fe^{3+}$ ions from octahedral to tetrahedral sites In $Mn_xCo_{1-x}Fe_2O_4$ was detected by Mossbauer spectroscopy for x>0.47. Vibrating sample magnetometry measurements on the samples at room temperature revealed that the saturation magnetization increases by Mn and Cr substitution for certain range of x, qualitatively explainable in terms of the comparison of spin magnetic moment among the related transition-metal ions.

• Journal of Korean Public Health Nursing
• /
• v.16 no.1
• /
• pp.176-189
• /
• 2002

The purpose of this study were to illustrate the various medication error types and causes and identified to related drugs to provide basic data for preventing nurses' medication error by analysing 73 cases of AJN 'medication Error' column(1993, Oct -2000, Nov). Nurses' types of medication error were classified into 7 types. The most frequent error types are wrong medication$(21.9\%)$ and the wrong dose$(21.9\%)$ together. The others are wrong $time(4.1\%)$, $omission(2.7\%)$, mechanical $error(2.7\%)$, incorrect IV $rate(1.4\%)$. wrong route $administration(1.4\%)$ in order. Nurses' causes of medication error were 9 kinds. The most frequent type is confusing between similar drug shape, color, size, name, injection devices and patient's $name(43.9\%)$ and the others are lack of knowledge about $drugs(26.8\%),\; slips(7.3\%),\; miscalculating\;dose(4.9\%)$, incorrect adjusts $devices(4.9\%)$, difficulty to read or illegible decimal $point(4.9\%),$ $abbreviation(2.4\%)$, fatigue with $overwork(2.4\%)$ and no communication with $patient(2.4\%)$ in order. Related drugs with medication error are as follows. - dose unit(IU. minims. mcg/min. mEq) : Heparin. insulin. synthetic calcitonin, some enzymes and hormones, vitamins, some antibiotics, tuberculin injection. MgSO4 injection. nitroglycerin - similar size, color and shape drug : $0.9\%$ N/S and acetic acid $0.25\%$ for irrigation. premixed 2mg lidocaine sol. and $0.9\%$ N/S, gentamycin 20mg/2mL for children and 80mg/2mL for adult, dextroamphetamine 5mg and 10mg capsule. sedatives chloral hydrate 250mg/5mL and 500mg/5mL - similar name :Aredia(pamidronate disodium) and Adriamycin(doxorubicin), Lamictal (lamotrigine) and Lamisil 250mg. Elderpryl and enalapril, cefotaxime and cefoxitin, carboplatin and cisplatin, sumatriptan and zolmitriptan, Celebrex and Celexa, Humulin and Humalog, Percodan and Percocet, Diabeta and Diabinese, Epivir and Retrovir, Xanax(alprazolam) and Zantac(ranitidine) - decimal point : low molecular weight warfarin, methotrexate - unfamiliar drug uses of familiar drug ; methotrexate. droperidol, imipramine, propranolol - number of drug name(misleading chemical name) : 6-thioguanine, 6-mercaptopurine, 5-fluorouracil - type of administration route : Oxycodone(OxyContin). - administration time : acarbose(Precose). - injection way (Z-track method): hydroxyzine - epidural cathether : LMWHs(enoxaparin, dalteparin), - ADD Vantage self contained delivery system : ceftriaxone(Rocephin)

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.322-327
• /
• 2012

Fate of fenitrothion aerially sprayed to control pine wood nematode (Bursaphelenchus xylophilus) was studied in a forest of Haman area. And the monitoring of fenitrothion was conducted in a stream flowed from forest area of Gijang sprayed fenitrothion. Fenitrothion 50% EC was diluted 100 times and applied two or three times using helicopter in Haman and Gijang, respectively. Average fenitrothion deposits on forest floor ranged from 6% of standard aerial application rate. Following to the second application, fenitrothion deposits in the pine needle ranged from 0.6 to 0.9 mg/kg and then rapidly decreased to 0.01 mg/kg after 109 days. Deposits on the plant washed off by rainfall and reached to soil surface was 1.3% of the application rate. All of fenitrothion on the ground resided in the forest floor covering the soil surface, where fenitrothion residues were decreased to a tenth at 109 days after the second application, but they were not detected in sol beneath it. And the only low level of fenitrothion residues, 0.0009 mg/L, was detected in runnel of the experimental forest just after aerial application. The concentration of fenitrothion in effluent from Gijang area was less than detection limit (0.0001 mg/L) during the entire period.

• Korean Journal of Materials Research
• /
• v.22 no.2
• /
• pp.66-70
• /
• 2012

Ti-Ni alloys are widely used in numerous biomedical applications (e.g., orthodontics, cardiovascular science, orthopaedics) due to their distinctive thermomechanical and mechanical properties, such as the shape memory effect, superelasticity and low elastic modulus. In order to increase the biocompatibility of Ti-Ni alloys, many surface modification techniques, such as the sol-gel technique, plasma immersion ion implantation (PIII), laser surface melting, plasma spraying, and chemical vapor deposition, have been employed. In this study, a Ti-49.5Ni (at%) alloy was electrochemically etched in 1M $H_2SO_4$+ X (1.5, 2.0, 2.5) wt% HF electrolytes to modify the surface morphology. The morphology, element distribution, crystal structure, roughness and energy of the surface were investigated by scanning electron microscopy (SEM), energy-dispersive Xray spectrometry (EDS), X-ray diffractometry (XRD), atomic force microscopy (AFM) and contact angle analysis. Micro-sized pores were formed on the Ti-49.5Ni (at%) alloy surface by electrochemical etching with 1M $H_2SO_4$+ X (1.5, 2.0, 2.5) wt% HF. The volume fractions of the pores were increased by increasing the concentration of the HF electrolytes. Depending on the HF concentration, different pore sizes, heights, surface roughness levels, and surface energy levels were obtained. To investigate the osteoblast adhesion of the electrochemically etched Ti-49.5Ni (at%) alloy, a MTT test was performed. The degree of osteoblast adhesion was increased at a high concentration of HF-treated surface structures.

• The Korean Journal of Physiology and Pharmacology
• /
• v.21 no.4
• /
• pp.415-421
• /
• 2017

We investigated the inhibitory effect of escitalopram, a selective serotonin reuptake inhibitor (SSRI), on voltage-dependent $K^+$ (Kv) channels in freshly separated from rabbit coronary arterial smooth muscle cells. The application of escitalopram rapidly inhibited vascular Kv channels. Kv currents were progressively inhibited by an increase in the concentrations of escitalopram, suggesting that escitalopram inhibited vascular Kv currents in a concentration-dependent manner. The $IC_{50}$ value and Hill coefficient for escitalopram-induced inhibition of Kv channels were $9.54{\pm}1.33{\mu}M$ and $0.75{\pm}0.10$, respectively. Addition of escitalopram did not alter the steady-state activation and inactivation curves, suggesting that the voltage sensors of the channels were not affected. Pretreatment with inhibitors of Kv1.5 and/or Kv2.1 did not affect the inhibitory action of escitalopram on vascular Kv channels. From these results, we concluded that escitalopram decreased the vascular Kv current in a concentration-dependent manner, independent of serotonin reuptake inhibition.

• Food Science of Animal Resources
• /
• v.40 no.5
• /
• pp.758-771
• /
• 2020

This study was to investigate the prevalence and characteristics of antimicrobial-resistant Staphylococcus aureus and methicillin-resistant S. aureus (MRSA) from 4,264 retail meat samples including beef, pork, and chicken in Korea between 2013 and 2018. A broth microdilution antimicrobial susceptibility testing was performed for S. aureus. Molecular typing by multilocus sequence typing (MLST), spa typing, and pulsed-field gel electrophoresis (PFGE), was performed on mecA-positive S. aureus strain. S. aureus was isolated at a rate of 18.2% (777/4,264), of which MRSA comprised 0.7% (29 strains). MLST analysis showed that 11 out of the 29 MRSA isolates were predominantly sequence type (ST) 398 (37.9%). In addition, ST72, ST692, ST188, ST9, and ST630 were identified in the MRSA isolates. The spa typing results were classified into 11 types and showed a high correlation with MLST. The antimicrobial resistance assays revealed that MRSA showed 100% resistance to cefoxitin and penicillin. In addition, resistance to tetracycline (62.1%), clindamycin (55.2%), and erythromycin (55.2%) was relatively high; 27 of the 29 MRSA isolates exhibited multidrug resistance. PFGE analysis of the 18 strains excluding the 11 ST398 strains exhibited a maximum of 100% homology and a minimum of 64.0% homology. Among these, three pairs of isolates showed 100% homology in PFGE; these results were consistent with the MLST and spa typing results. Identification of MRSA at the final consumption stage has potential risks, suggesting that continuous monitoring of retail meat products is required.

• Korean Journal of Microbiology
• /
• v.55 no.1
• /
• pp.46-51
• /
• 2019

This study was carried out to evaluate antimicrobial effects of a mixture of resin fractionated ethanol extract of Eucalyptus globulus, Yucca recurvifolia, and tea tree (Melaleuca alternifolia). The plant fraction mixture showed low minimum inhibitory concentration (0.24~3.32 mg/ml) against several bacteria and yeast that usually used as the target skin microbes in a cosmetic industry, and it was more effective than antibiotics, triclosan and ampicillin. In a time-kill assay the plant fraction mixture reduced more than 92% of microbial populations during 4 h, and significantly increased leakage of nucleotides from all microorganisms tested. Antimicrobial effect of the plant fraction mixture was not affected by divalent cation ($Mg^{2+}$ and $Ca^{2+}$). These results suggest that the fraction mixture of ethanol extracts of E. globulus, Y. recurvifolia, and M. alternifolia may be utilized as an efficient preservative in cosmetics to prevent contamination by human skin microbes.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.4
• /
• pp.233-242
• /
• 2023

In recent years, energy-management studies in buildings have proven useful for energy savings. Typically, during heating and cooling, the energy from a given building is lost through its windows. Generally, to block the entry of ultraviolet (UV) and infrared (IR) rays, thin films of deposited metals or metal oxides are used, and the blocking of UV and IR rays by these thin films depends on the materials deposited on them. Therefore, by controlling the thicknesses and densities of the thin films, improving the transmittance of visible light and the blocking of heat rays such as UV and IR may be possible. Such improvements can be realized not only by changing the two-dimensional thin films but also by altering the zero-dimensional (0-D) nanostructures deposited on the films. In this study, 0-D nanoparticles were synthesized using a sol -gel procedure. The synthesized nanoparticles were deposited as deep coatings on polymer and glass substrates. Through spectral analysis in the UV-visible (vis) region, thin-film layers of deposited zinc oxide nanoparticles blocked >95 % of UV rays. For high transmittance in the visible-light region and low transmittance in the IR and UV regions, hybrid multiple layers of silica nanoparticles, zinc oxide particles, and fluorine-doped tin oxide nanoparticles were formed on glass and polymer substrates. Spectrophotometry in the UV-vis-near-IR regions revealed that the substrates prevented heat loss well. The glass and polymer substrates achieved transmittance values of 80 % in the visible-light region, 50 % to 60 % in the IR region, and 90 % in the UV region.