• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.143-143
• /
• 2005

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.269-276
• /
• 2009

Antimony doped tin oxide ($SnO_2:Sb$) films, which are used as the front contact and back reflector of thin film solar cells, have been deposited by d,c, magnetron sputtering. The dependence of electrical and optical properties of the films on the preparation conditions, such as $O_2$ gas ratio, substrate temperature, annealing temperature was investigated. The sputter gas composition was found to affect the properties of the films. With incorporating $O_2$ gas, the electrical and optical properties of films significantly were improved. The minimum resistivity and optical transmittance over 80 % in visible region were obtained at the oxygen concentration of 30 %, When the substrate temperature was higher, the resistivity of $SnO_2:Sb$ films was decreased, while the absorption edge shifted to shorter wavelength, indicating higher optical band gap. Heat treatment over $600^{\circ}C$ resulted in poorer electrical and optical properties due to SnO phase (102) plane.

• Journal of Ceramic Processing Research
• /
• 제19권5호
• /
• pp.388-393
• /
• 2018

Sublimation of $Bi_2O_3$-based materials is an important degradation issue for the long-term applications of many electronic devices. A series of $SnO_2$-doped $Bi_2O_3$ materials (SBO), was synthesized, densified, and then tested in air or strong reducing atmosphere. The $SnO_2$-doping effects and sublimation kinetics of the SBO materials were studied by X-ray diffraction (XRD), scanning electron microscope (SEM) and precise mass loss measurement. The results show that formation of $Bi_2Sn_2O_7$ phase greatly retards the mass loss of SBO. The SBO samples show a surface sublimation in an energy of $52.6kJ{\cdot}mol^{-1}$. However, the sublimation is also controlled by surface microstructure as the amount of vaporizing species (the Bi or gaseous Bi-oxides) is more than 0.1 mass%. The evaporation is retarded on the rough surface and the mechanism of surface evaporation is changed to diffusional control.

• 한국재료학회지
• /
• 제4권4호
• /
• pp.428-438
• /
• 1994

Y-Ba-Cu-O 계에서 123상의 성장에 미치는 Sn의 효과를 관찰하기 위하여 Sn이 첨가된 123+Sn성형체와 Sn이 첨가되지 않은 123성형체와의 couple시편을 만들었다. $1100^{\circ}C$에서 24시간 유지한 후 $970^{\circ}C$에서 1시간 유지한 시편에서 123상은 Sn이 첨가된 123+Sn 성형체의 표면에서부터 생성되어 Sn이 첨가되지 않은 123성형체 내부쪽으로 성장하였다. $1100^{\circ}C$에서 48시간 유지한 후 $970^{\circ}C$에서 1시간 유지한 시편에서는 123상이 관찰되지 않았으며 Y-Ba-Sn으로 구성된 결정립이 관찰되었다.

• 한국결정성장학회지
• /
• 제33권2호
• /
• pp.83-90
• /
• 2023

최근 전력반도체 소재로 관심을 가지는 Ga₂O₃의 β-상은 열역학적으로 가장 안정한 상을 가지며 4.8~4.9 eV의 넓은 밴드갭과 8 MV/cm의 높은 절연파괴전압을 갖는다. 이러한 우수한 물리적 특성으로 인해 전력반도체 소재로 많은 주목을 받고 있다. β-Ga₂O₃는 SiC 및 GaN의 소재와는 다르게 액상이 존재하기 때문에 액상 성장법으로 단결정 성장이 가능하다. 하지만 성장한 순수 β-Ga₂O₃ 단결정은 전력 소자에 적용하기에는 낮은 전도성으로 인해 의도적으로 제어된 도핑 기술이 필요하며 도핑 특성에 관한 연구가 매우 중요하다. 이 연구에서는 Ga₂O₃ 분말과 SnO₂ 분말의 몰 비율을 다르게 첨가하여 Un-doped, Sn 0.05 mol%, Sn 0.1mol%, Sn 1.5 mol%, Sn 2 mol%, Sn 3 mol%의 혼합분말을 제조하여 EFG(Edge-defined Film-fed Growth) 방법으로 β-Ga₂O₃ 단결정을 성장시켰다. 성장된 β-Ga₂O₃ 단결정의 Sn dopant 함량에 따른 결정 품질 및 광학적, 전기적 특성 변화를 분석하였으며 Sn 도핑에 따른 특성 변화를 광범위하게 연구하였다.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.271-274
• /
• 2009

Redox investigation of Sn and S ion was attempted in alkaline earth borosilicate glass melts with only 1 mol% $Na_2O$ by means of Square Wave Voltammetry (SWV). According to voltammograms, there was only one peak due to $Sn^{4+}/Sn^{2+}$ in melt doped with $SnO_2$. The calculated standard enthalpy and entropy of the reduction of $Sn^{4+}$ to $Sn^{2+}$ were 116kJ/mole and 62 J/mol K, respectively. The determined redox ratio, [$Sn^{2+}$] / [$Sn^{4+}$] in the temperature range of $1300{\sim}1600^{\circ}C$ was in $0.4{\sim}2.1$. On the contrary, in the voltammogram of melt doped with $BaSO_4$ there was no peak due to $S^{4+}/S^o$ but shoulder that might be attributed to the adsorption of sulfur at the electrode. The absence of the peak related with $S^{4+}/S^o$ was discussed from the view-point of the thermal decomposition behavior of $BaSO_4$ in the glass batch.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.30-30
• /
• 2008

Lead-free piezoelectric ceramics 0.97$(Na_{0.5}K_{0.5})NbO_3$-0.03Ba$(Ti_{1-x}Sn_x)O_3$ [NKN-BTS-x] ceramics doped with 1 mol% $MnO_2$ have been fabricated by a sintering technique with muffling. The $MnO_2$-doped NKN-BTS-x ceramics with x$\leq$0.2 have pure orthorhombic perovskite structure at room temperature. The dense microstructure was developed with grain growth as an increase of amount of Sn. Moreover, the addition of Sn was found to have a significant influence on piezoelectric properties. In particular, the $MnO_2$-doped NKN-BTS-0.1 ceramics showed improved piezoelectric properties of piezoelectric constant ($d_{33}$=145pC/N), relatively large electromechanical coupling factor ($k_p$=43%), dielectic constant (${\varepsilon}^T_{33}/{\varepsilon}_0$=676) dielectric loss (tan$\delta$=1.3%).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.10-13
• /
• 1993

ln this study, x PSN - y PT - z PZ ceramics doped with w MnO$_2$were fabricated by the mixed oxide method at 1250[$^{\circ}C$] for 2[hr] and then the dielectric and pyroelectric properties were investigated. In the 0.05 PSN - 0.4 PT - 0.55 PZ specimen with 0.5[wt.%] MnO$_2$, the pyroelectric coefficient was 6.6${\times}$10$\^$-8/[C/cm$^2$$.$$^{\circ}C$], respectibly.

• 한국재료학회지
• /
• 제21권10호
• /
• pp.546-549
• /
• 2011

Nano-sized $SnO_2$ thick films were prepared by a screen-printing method onto $Al_2O_3$ substrates. The sensing characteristics were investigated by measuring the electrical resistance of each sensor in a test box as a function of the detection gas. The nano-sized $SnO_2$ thick film sensors were treated in a $N_2$ atmosphere. The structural properties of the nano $SnO_2$with a rutile structure according to XRD showed a (110) dominant $SnO_2$ peak. The particle size of $SnO_2$:Ni nano powders at Ni 8 wt% was about 45 nm, and the $SnO_2$ particles were found to contain many pores according to the SEM analysis. The sensitivity of the nano $SnO_2$-based sensors was measured for 5 ppm $CH_4$ gas and $CH_3CH_2CH_3$ gas at room temperature by comparing the resistance in air with that in the target gases. The results showed that the best sensitivity of $SnO_2$:Ni and $SnO_2$:Co sensors for $CH_4$ gas and $CH_3CH_2CH_3$ gas at room temperature was observed in $SnO_2$:Ni sensors doped with 8 wt% Ni. The response time of the $SnO_2$:Ni gas sensors was 10 seconds and recovery time was 15 seconds for the $CH_4$ and $CH_3CH_2CH_3$ gases.

• Transactions on Electrical and Electronic Materials
• /
• 제5권5호
• /
• pp.189-193
• /
• 2004

Pure and Sn or Pt doped $\alpha-Fe_2O_3$ thin films were prepared on $Al_2O_3$ substrates by RF-magnetron sputtering method and the sensitivities were compared. It was found that pure $\alpha-Fe_2O_3$ thin films did not exhibit much selectivity in CO and $i-C_4H_{10}$ gases while it showed the high sensitivity in proportion to the gas concentration of $C_2H_{5}OH$ gas. Pt-doped $\alpha-Fe_2O_3$ showed to be alike sensing properties as pure $\alpha-Fe_2O_3$ thin film in $C_2H_{5}OH$ gas. However, Sn-doped $\alpha-Fe_2O_3$ thin films exhibited the excellent sensitivity and selectivity in Hz gas. After microstructure modification by plasma etching on pure $\alpha-Fe_2O_3$ thin films, the gas sensing characteristics were dramatically changed.