• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.554-560
• /
• 2012

Recently, it has been increasing trend to use conductive materials as electronics and communication technology in electronics industry are developing. The noble metal such as Ag, Pt, Pd etc. are mostly used as conductive materials, To reduce production cost, alternative materials with similar characteristics of noble metals are needed. Copper has advantages, i.e its electronic properties are similar to noble metals and low cost than noble metal, but its use has been restricted because of oxidation in air. In this study, the tin film was coated on copper by electroless plating to protect copper from oxidation and to confirm the effects of temperature, pH, amount of $SnCl_2$, and feeding speed in plating conditions. Additionally, we apply $Cu_{core}Sn_{shell}$ powder as conductive filler with low-temperature densification and analysis by SEM, XRD, FIB and 4-Point Probe techniques. As result of the study, tin film was coated well on copper and was protected from oxidation. After low-temperature densification treatment, the meted tin made chemical interconnections with copper. Accordingly, conductivity was increased than before condition. We hope $Cu_{core}Sn_{shell}$ powder to replace noble metals and use in the electronic field.

• Journal of the Korean Home Economics Association
• /
• v.40 no.11
• /
• pp.131-140
• /
• 2002

The purpose of this study is to investigate the dyeability, antibacterial activity and deodorization on cotton and silk fabrics dyed with extracted solution from gardenia. The results are as follows: 1. The K/S value of silk fabrics was higher than that of cotton fabrics, and the K/S value was slightly increased by mordanting with $SnCl_2.2H_2O$ and $K_2Cr_2O_{7}$ on cotton and silk fabrics. 2. Cotton fabrics showed yellow from GY to Y and silk fabrics showed yellow or reddish yellow from GY to Y-YR. 3. The fastness to washing of cotton fabrics was very poor and that of silk fabrics was middle or lower, excluding good fastness to wool contamination of both fabrics. The fastness to dry cleaning and rubbing of both fabrics was very good. The fastness to perspiration of cotton fabrics was middle or higher, but that of silk fabrics was much better than that of cotton fabrics. The fastness to the light of both fabrics showed very poor with 1 grade. Dyeing fastness was slightly improved by mordanting on both fabrics. 4. Silk and cotton fabrics did not show antibacterial activity, but the activity of silk fabrics was higher than that of cotton fabrics. The antibacterial activity was increased by mordanting. 5. The deodorization of dyed cotton and silk fabrics was excellent, and that of silk fabrics showed better than that of cotton fabrics.

• Journal of Korean Society of Forest Science
• /
• v.88 no.4
• /
• pp.510-522
• /
• 1999

The air pollutants ; $SO_2$, $SO{_4}^{-2}$, $NO{_3}^-$, $Cl^-$ are absorbed into soils through falling with dusts and rain from the atmosphere. The sources of heavy metal contaminants in the environments are agricultural and horticultural materials, sewage sludges, fossil fuel combustion, metallurgical industries, electronics and waste disposal etc.. The soils and hydrosphere can be polluted on the way of the circulation of these heavy metals. Studied pollutant anions are $SO{_4}^{-2}$, $NO{_3}^-$ and $Cl^-$ and heavy metals are Se, Mo, Zn, Cd, Pb, Mn, Cr, Co, V, As, Cu and Ni which are the elements to be concerned with the essentials for plants, with animal and human health. This study is with the aim of selecting the species of roadside trees and green space trees which have excellent absorption of air pollutants and heavy metals from the atmosphere and the soils in the urban area. Two areas are designated to carry out this study : urban area ; Kwangju city and rural area ; the yard of Forest Environment Institute of Chollanam-do, at Sanje-ri, Sampo-myum, Naju city, Chollanam-do (23km away from Kwangju). This study is carried out to understand the movement of anions and heavy metals from the soils to the trees in both areas, the absorption of anions and heavy metals from atmosphere into leaves and the amounts of anions and heavy metals in leaves and fine roots(< 1mm dia.) of roadside trees and green space trees in Kwangju and trees in the yard of Forest Environment Institute of Chollanam-do. The tree species selected for this study in both areas are Ginkgo biloba, Quercus acutissima, Cedrus deodara, Platanus occidentalis, Robinia pseudoacacia, Alnus japonica. Metasequoia glyptostroboides. Zekova serrata. Prunus serrulata var. spontanea, and Pinus densiflora. The results of the study are as follows : 1. $SO{_4}^{-2}$, $NO{_3}^-$ and $Cl^-$ concentrations are higher in the soils of the urban area than in those of the rural area, and $NO{_3}^-$ and $SO{_4}^{-2}$ are higher in the leaves than in the roots due to the absorption of the these pollutants through the stomata. 2. Ginkgo biloba, Robinia pseudoacacia. Zekova serrata, Quercus acutissima, and Platanus occidentalis can be adequated to the roadside trees and the environmental trees due to their good absorption of $NO{_3}^-$ and $SO{_4}^{-2}$. 3. Heavy metals in the soils of both areas are in the order of Mn > Zn > V > Cr > Pb > Ni > Cu > Mo> Cd, and in the leaves and roots of the trees in the both areas are in the order of Mn>Zn>Cr>Cu>V>Ni. Both orders are similar ones except V. There are more in the urban soils than in the rural soils in amount of Mn, Zn, Pb, V, Cu. 4. It is supposed that there is no antagonism between Mn and Zn in this study. 5. Se, Co and As are not detected in the soils, the leaves and the roots in both areas. Sn, Mo, Cd and Pb are also not detected in the leaves and roots in spite of considerable amount in the soils of both areas.

• Korean Journal of Human Ecology
• /
• v.7 no.1
• /
• pp.167-173
• /
• 1998

Having silk dyed with some pigment extracted from the skin of an onion, examined the change of color by time and frequency of dyeing and a mordanted cloth, and the antibiosis of a dyed cloth and a mordanted cloth. The result of this were as follows ; 1. The pigment of an onion was easily extracted in the hot water of $40^{\circ}C$ and much more extracted as the temperature of water rises($70^{\circ}C$). 2. As a result of dyeing it by the change of time, 30minutes, 60minutes, 90minutes and the frequency of dyeing, once, twice, three times after filtering the extracted solution, the one dyed three times for 30minutes was the best. 3. The difference of color of a mordanted cloth was the highest in the mordant of $SnCl_2\;2H_2O$ on the basis of the value of L of the non-mordant dyed three times. 4. The mordant of copper sulfate was proved to have the highest antibiosis in the antibiosis of a dyed cloth and a mordanted cloth, and it was proved that the pigment of the skin of an onion had excellent antibiosis.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.1
• /
• pp.29-36
• /
• 2019

Corrosion inhibition by synthesised ligand, 2-acetylpyridine 4-ethyl-3-thiosemicarbazone (HAcETSc) and its tin(IV) complex, dichlorobutyltin(IV) 2-acetylpyridine 4-ethyl-3-thiosemicarbazone ($Sn(HAcETSc)BuCl_2$) on mild steel in 1 M hydrochloric acid (HCl) was studied using weight loss measurement, potentiodynamic polarisation, electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). The inhibition efficiency increases by increasing the inhibitor concentrations. The polarisation study showed that both synthesised compounds were mixed type inhibitors. The electrochemical impedance study showed that the presence of inhibitors caused the charge transfer resistance to increase as the concentration of inhibitors increased. The adsorption of these compounds on mild steel surface was found to obey Langmuir's adsorption isotherm with the free energy of adsorption ${\Delta}G{^o}_{ads}$ of -3.7 kJ/mol and -7.7 kJ/mol for ligand and complex respectively, indicating physisorption interaction between the inhibitors and 1 M HCl solution.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1909-1913
• /
• 2022

This work shows the technical feasibility to obtain uranium tetrafluoride through an electrochemical mercury cell. This technique represents a custom scaling-up methodology from our previous studies to obtain UF₄ using the dropping mercury electrode cell. The UF₄ products were obtained from natural UF₆ gas, which was hydrolyzed to obtain a 50 g/L UO₂F₂ solution. The electrolysis cell was made using a mercury reservoir, to reach UF₄ production rates of 1 Kg UF₄/day. This custom design allowed a stable UF₄ production thanks to the mercury cathode, which do not permit the accumulation of solid products in its surface. The cell was tested using current densities from 5.000 to 17.500 A/m² and temperatures from 25 to 65 ℃. The maximum current efficiency achieved under these conditions was 80%. The UF₄ powders possessed spherical morphology, with diameters between 20 and 80 ㎛. Compared to the SnCl₂ precipitation, this process did not allow preferential growth of the precipitates. This improved the compaction of the UF₄ - Mg powders mixtures, with densities between 3.0 and 3.5 g/cm³. The purity of the UF₄ products was over 98%.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.193-197
• /
• 2001

This study was carried out to recover gold, silver and other valuable metals from the printed circuit boards (PCB) of waste computers. PCB samples were crushed to under 1mm by a shredder and initially separated into 30% conducting and 70% non-conducting materials by an electrostatic separator. The conducting materials, which contained the valuable metals, were then used as the feed material for magnetic separation where it was found that 42% was magnetic and 58% non- magnetic. The non-magnetic materials contained 0.227mg/g Au and 0.697mg/g Ag. Further leaching of the non-magnetic component using 2.0M sulfuric acid and 0.2M hydrogen peroxide at 85$^{\circ}C$ extracted more than 95% copper, iron, zinc, nickel and aluminium. Au and Ag were not extracted in this solution, however, more than 95% of Au and 100% of Ag were selectively leached with a mixed solvent (0.2M ammonium thiosulfate, 0.02M copper sulfate, 0.4M ammonium hydroxide). Finally, the residues were reacted with a NaCl solution to leach out Pb while sulfuric acid was used to leach out Sn. Recoveries reached 95% and 98% in solution, respectively.

• Journal of Powder Materials
• /
• v.15 no.6
• /
• pp.450-457
• /
• 2008

The objectives of this study were the development of a synthesis technique for highly active nanosized ITO powder and the understanding of the reaction mechanisms of the ITO precursors. The precipitation and agglomeration phenomena in ITO and $In_{2}O_{3}$ precursors are very sensitive to reaction temperature, pH, and coexisting ion species. Excessive $Cl^-$ ion and $Sn^{+4}$ ions had a negative effect an synthesizing highly active powders. However, with a relevant stabilizing treatment the shape and size of ITO and $In_{2}O_{3}$ precursors could be controlled and high density sintered products of ITO were obtained. By applying the reprecipitation process (or stabilization technique), highly active ITO and $In_{2}O_{3}$ powders were synthesized. Sintering these powders at $1500^{\circ}C$ for 5 hours produced 97% dense ITO bodies.

• Nuclear Engineering and Technology
• /
• v.37 no.4
• /
• pp.391-394
• /
• 2005

N-(3-bromo-2,4,6-trimethylacetanilide)iminodiacetic acid (BrTIDA) was synthesized using nitrilotriacetic anhydride prepared in situ, and lyophilized vials were prepared which contained 20 mg of BrTIDA and 0.4 mg of $SnCl_2$. To evaluate the clinical efficacy of the in-house prepared lyophilized kit, a technetium-99m complex of BrTIDA was prepared; its in vivo pharmacokinetic behavior was evaluated via animal studies to assess the hepatocytic function and the functional status of the cystic duct and the gallbladder. Serial static image scans of rabbits and the biodistribution in mice injected with $^{99m}Tc-BrTIDA$ revealed that none of the tissues except for the hepatobiliary system showed radioactivity concentrations, and a rapid clearance from the organs was observed. In conclusion, a lyophilized kit and its prepared $^{99m}Tc-BrTIDA$ can be applied as a hepatobiliary imaging agent for the evaluation of the functional status of the hepatocytes and the patency of the biliary duct.

• The Korean Journal of Nuclear Medicine
• /
• v.23 no.1
• /
• pp.63-69
• /
• 1989

In order to develop technetium-99m-labelled human albumin microsphere (HAM) for lung scintigraphy, various experimemts such as preparation and fractionation of HAM, establishment of optimal labelling conditions, determination of radiochemical purity, stability test and biodistribution of $^{99m}Tc-HAM$ were carried out. HAM was prepared from the suspension of 1ml aqueous human serum albumin (25%) in 130 ml of olive oil at $130\sim135^{\circ}$ with vigorous stirring. The resulting HAM was fractionated with microsieve to get the desired particle size $(15\sim50\mu)$ and autoclaved for sterilizaiton. The HAM particles were treated with stannous chloride and the pH of the suspension was adjusted to $3.0\sim3.5$ with phosphate buffer. After freeze-drying the contents of single reaction vial containing 5 mg of HAM and 0.2 mg of $SnCl_2$ it was reacted with $Na^{99m}TcO_4$. The labelling yield was higher than 99.5% and the stability of $^{99m}Tc-HAM$ was high enough to maintain 99.1% of radiochemical purity up to 24 hours. Lung and liver uptake in mice was found to be 94% and 0.9%, respectively. Excellent rabbit and human lung scans were also obtained.