• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.755-759
• /
• 2008

New cathode materials $LaNi_{1-x}{Cu_x}{O_3}$ (typically $LaNi_{0.8}Cu_{0.2}O_3$) were synthesized using a co-precipitation method. The structure and morphology of the powders were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The composite material [$Ce_{0.8}Sm_{0.2}O_{2-\ddot{a}}$(SDC) and carbonate (${Na_2}{CO_3},{Li_2}{CO_3}$)], NiO and $LaNi_{1-x}{Cu_x}{O_3}$ were used as the electrolyte, anode and cathode, respectively. The electrochemical performance of La-Ni-Cu-O perovskite oxide at low temperatures ($400{\sim}550^{\circ}C$) was studied. The results showed that $LaNi_{0.8}Cu_{0.2}O_3$ precursor powder prepared through a co-precipitation method and calcined at $860^{\circ}C$ for 2 h formed uniform grains with diameters in the range of $400{\sim}500\;nm$. The maximum power density and the short circuit current density of the single cell unit at $550^{\circ}C$ were found to be $390\;mW/cm^2$ and $968\;mA/cm^2$, respectively.

• 자원환경지질
• /
• 제22권2호
• /
• pp.151-166
• /
• 1989

A study of rare-earth mineralization in Kyemyungsan metasedimentary formation of Precambrian Ogcheon Group was carried out in the Mt. Eore Area near Choongju City based on the thorium (Th) and uranium (U) count data of geophysical airborne survey. This rare-earth mineralization was found in the magnetite-bearing banded quartizite which contains diagnostically some amounts of the metamict allanite. The brown colored allanites are distributed as aggregates of fine grains and sometimes banded structures with magnetite (inter growth) along the banding. The ore bed is displaced by the small faults and granite intrusions, and separated 5 ore blocks. The dimensions of the outcrop are 50-80 m in width, 1,500 m in length with the strike of $N70-80^{\circ}E$ and dip of $50-80^{\circ}NW$. In the field, the values of total gamma ray count of GR-101A scintillometer were able to measure more than 400 cps and maximum 1,500 cps, which data are coincided with the values of GR-310 gamma ray spectrometer and the gamma ray count of well logging data. The chemical compositions of the allanites from EPMA data are ranged from$\sum^{TR_2O_3}$ 18.57% to 26.00%, and the cerium oxides ($Ce_2O_3$) of allanite are positive relation with $La_2O_3$, MgO, FeO, MnO and negative relation with $SiO_2$, $Al_2O_3$, $Nd_2O_3$. The result of Neutron Activation Analysis (N.A.A.), Multi-Channel Analysis (M.C.A.) and wet chemistry of 25 outcrop samples for the elements of REE, Zr, U, Th shows strong anomalies. The good correlation elements with the thorium (Th) are the elements of La, Ce, LREE, $TR_2O_3$, Pr, Sm, Yb, Lu by the increasing order.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.620-623
• /
• 2001

The peculiarities of using Self-propagating High-temperature Synthesis (SHS) and solid state phase synthesis for production of high temperature superconductor materials are discussed. Oxide superconductors with general formula $ReBa_2$$Cu_3$$O_{7-x}$ (Re= Y, Yb, Sm, Nd) have been made with using barium oxide initial powder instead of traditional barium carbonate. X-ray powder diffraction showed a single phase orthorhombic perovskite structure was produced in all reactions. Phenomena observed during the grinding of the reactant mixture are presented. Mechano-chemical activation - as a pretreatment of the reactant mixture - strongly influences the kinetic parameters, the reaction mechanism, and the composition and structure of the final product.

• Fisheries and Aquatic Sciences
• /
• 제19권6호
• /
• pp.27.1-27.8
• /
• 2016

Apparent digestibility coefficients (ADCs) of dry matter, crude protein, crude lipid, energy, essential amino acids, and fatty acids in extruded pellets containing various fish meals were determined for olive flounder (Paralichthys olivaceus). Eight extruded pellet diets were prepared to contain different fish meals (herring fish meal, anchovy fish meal, mackerel fish meal, sardine fish meal-A, sardine fish meal-B, tuna fish meal, pollock fish meal-A, and pollock fish meal-B) designated as HM, AM, MM, SM-A, SM-B, TM, PM-A, and PM-B, respectively. Chromic oxide ($Cr_2O_3$) was used as an inert indicator at a concentration of 0.5 % in the diet. Feces were collected from triplicate groups of fish ($151{\pm}4.0g$) using a fecal collection column attached to the fish rearing tank for 4 weeks. Dry matter ADCs of the MM, SM-A, SM-B, and PM-A diets were higher than those of all the other dietary groups, and the lowest digestibility of dry matter was observed in the PM-B diet. Fish fed the MM, SM-A, and PM-A diets showed significantly higher ADC of protein than those fed the AM, SM-B, TM, and PM-B diets. Lipid ADC of PM-B was significantly lower than that of the other diets. Energy ADCs of fish fed the MM, SM-A, and PM-A diets were significantly higher than those of the other diets. The availability of essential amino acids in the MM, SM-A, and PM-A diets were generally higher than that of the other fish meal diets, while TM showed the lowest values among all the experimental diets. ADCs of fatty acids in the AM, MM, SM-A, and PM-A diets were generally higher than those of fatty acids in the other diets, and the lowest values were recorded for the PM-B diet. These results provide information on the bioavailability of nutrients and energy in various fish meals which can be used to properly formulate practical extruded feeds for olive flounder.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 제11차 KACG 학술발표회 Crystalline Particle Symposium (CPS)
• /
• pp.55-85
• /
• 1996

지르코니아 분말은 ZrO2 결정상이 온도변화에 따라 부피변화를 수반하는 상전이변태를 나타낸다. 단사정 ZrO2가 110$0^{\circ}C$에서는 정방정으로, 2$700^{\circ}C$ 내외에서는 입방정으로 결정구조가 가역적으로 변한다. 이 ZrO2에 금속산화물을 고용시키면 형석 (CaF2:Florite)형의 입방정 결정구조가 실온에서도 안정하게 존재하게 된다. 안정화제 산화물은 caO, MgO등 2가 산화물외에 3가 또는 4가의 금속산화물로서 Sc2O3, Y2O3, Sm2O3, Nd2O3, Gd2O3, Y2O3, CeO2 등이며 이들은 금속이온의 원자가가 변하기 쉬운 희토류 산화물이다. 안정화 지르코니아는 형석형 결정구조이며 결정화학적으로 보면 금속양이온이 산소이온에 대해서 정육면체형의 8배위를 하고 있다. 이때 이온반경비(양이온/음이온)에 따라 Zr+4자리와 O-2자리의 격자위치와 모양이 형성되므로 비틀어진 정육면체구조이건 이상적인 정육면체 형석구조를 이룬다. 이는 지르코니아의 결정상의 2상-3상인 부분안정화 지르코니아다결정체(PSZ : partially stabilized zirconia)이거나 단일상-2상인 정방정 지르코니아다결정체(TZP : tetragonal zirconia polycrystal)의 결정구조를 가지는데 기인한다. PSZ는 주로 MgO, CaO를 안정화제로 고용시켜 입방정 영역에서 소결하고 이를 다시 입방정과 정방정의 상 영역에서 열처리하여 입방정 입자내부에 정방정을 석출 형성시킨 것이며 TZP는 Y2O3 및 CeO2를 고용시켜 PSZ와 다르게 일반적인 상압소결한 정방정 결정상의 미립자이다. 산화지르코늄 분말은 지르콘사에서 열분해시킨 지르코늄소결.융해괴(caustic fusion clinker)를 산처리하여얻어진 지르코늄산용액(zirconyl acid solution : cloride, sulfide, nitride 등)으로부터 제조된다. 고순도 산화지르코늄은 용액 결정석출법에 의해 ZrOCl2.8H2O, 5ZrO2.3SO3.15H2O, ZrO(NO3)2.xH2O 등의 지르코늄 수화물만을 재결정화시킨 것으로부터 얻을 수 있으며 이 지르코늄염 수용액으로부터 입자미세구조를 효과적으로 제어하여 산화지르코늄 및 안정화 지르코니아 분말제조가 가능하다. 안정화 지르코니아 분말은 ZrO2와 안정화산화물의 고용을위하여 가열처리를 필요로 하며 일정온도에서 최적상태로 숙성하므로서 2가지 상(phase) 이상의 고용체를 가지게 된다. 안정화 지르코니아 분말은 고용처리온도를 낮추고 효과적으로 생성시키기 위해서는 지르코늄 및 안정화제염을 혼합하고 습식 직접합성하여 저온에서 고용체의 합해진상 영역을 생성시키는 것이다. 이는 지르코니아 원료분말의 미세구조를 제어하므로서 가능하며 이때 화학성분조성과 크기형태가 균일하게 분포된 입자분말을 얻을 수 있다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.107.1-107.1
• /
• 2008

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.365-370
• /
• 2003

The phase development process of $Ba_2$ $Ti_{9}$ $O_{20}$ ceramics is not clearly known and frequently accompanies second phases which deteriorate dielectric properties. In synthesizing $Ba_2$ $Ti_{9}$ $O_{20}$ ceramics, in order to trace the reaction sequence during conventional solid-state reaction in BaO-Ti $O_2$ system, different barium sources of BaC0$_3$ and BaTi0$_3$ precursor were used as starting materials. From the analysis of XRD patterns, different secondary phases could be identified depending on the barium source used, which might mean that the equilibrium phases in BaO-Ti $O_2$ system are very difficult to be synthesized. Because the BaTi0$_3$ precursor provides short diffusion paths of ions, the system revealed less secondary phases during solid state reaction. In synthesizing BaO-xSm$_2$0$_3$-4.5Ti0$_2$ system using different barium sources, different secondary phases were developed also. Microstructure and dielectric properties were examined and discussed in terms of secondary phase development.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.268-269
• /
• 2006

The estimation of applicability $SrTiO_3:Pr^{3+}$, Al to a class low-voltage flat-panel displays based on field emission effect, which have average value anode voltage $U_a=300V$ and current density $j=100\;mA/sm^2$ at duty 240, has given positive result. In the same time observably for the most effective sample in similar conditions of excitation high brightness - more than $500\;Kd/m^2$ and linear brightness dependences from current density and voltage allows to decrease greatly the power which consumed by the device.

• 광물과 암석
• /
• 제35권2호
• /
• pp.153-168
• /
• 2022

치악산 편마암복합체에서 방사성원소를 포함하고 있는 광물을 파악하고, 주변 지하수에 포함되어 있는 방사선원소(우라늄)와의 연관성을 확인하고자 암석학적 및 광물 화학 분석을 수행하였다. 현미경 및 전자현미경 분석 결과, 주 구성광물은 사장석, 흑운모, 석영, 알칼리장석, 녹니석 그리고 방해석이며, 부수광물은 스펜, 갈렴석, 인회석, 저어콘, 토라이트, 티탄철석, 황철석 그리고 방연석 등 총 14종을 확인하였다. 토라이트의 경우 거정의 갈렴석 내 ~1 mm의 크기로 소량 관찰된다. 희토류 원소를 많이 포함하고 있는 갈렴석은 각기 다른 3 가지 산출양상을 보인다. EPMA 분석 결과, 거정의 갈렴석에서는 TiO₂~1.70 wt.%, Ce₂O₃~11.86 wt.%, FeO~13.31 wt.%, MgO~0.90 wt.% 그리고 ThO₂~1.06 wt.% 원소들의 함량이 높게 나타나며, Al₂O₃ 17.35 ± 2.15 wt.% (n = 7), CaO 12.13 ± 1.81 wt.% (n = 7) 평균 함량이 가장 낮은 값을 보인다. 티탄철석을 둘러싸고 있는 스펜 집합체의 가장자리에 존재하는 갈렴석은 Al₂O₃~24.00 wt.%, Nd₂O₃~5.10 wt.%, Sm₂O₃~0.66 wt.%, Dy₂O₃~0.86 wt.% 그리고 Y₂O₃~1.38 wt.% 원소들의 함량이 높게 나타나며, TiO₂ 0.35 ± 0.21 wt.% (n = 11), Ce₂O₃ 5.25 ± 1.03 wt.% (n = 11), FeO 9.84 ± 0.26 wt.% (n = 11), MgO 0.12 ± 0.05 wt.% (n = 11) 그리고 La₂O₃ 1.49 ± 0.29 wt.% (n = 11) 등과 같이 평균 함량이 가장 낮은 값을 보인다. 모암의 기질부에서 관찰되는 갈렴석의 화학성분은 앞서 설명한 갈렴석의 중간 정도의 값을 가진다. 연구대상인 치악산 편마암복합체 내 미그마타이트질 편마암에는 주목할 만큼의 우라늄 함량을 가지는 광물이 발견되지는 않았다. 따라서 지하수에서 나타나는 우라늄의 기원과 주변 지질과의 연관성을 명확하게 밝혀내지는 못했다. 하지만 방사성 원소인 토륨 원소 및 희토류 원소를 다량 포함하는 갈렴석이 풍부하게 존재하는 것이 이번 연구결과로 확인되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권4호
• /
• pp.16-18
• /
• 2007

We report the results of MOD-processed YBCO coated conductors on the IBAD-MgO template. The precursor solution was coated on the $CeO_2-buffered$ IBAD-MgO template using a slot-die coating method, calcined at a temperature of $550^{\circ}C$, and fired at high temperatures for 2.5 h in a reduced oxygen atmosphere. The $J_C$ value of YBCO coated conductors was found to be very sensitive to the microstructure, and thus higher $J_C$ value could be achieved when the in-plane texture was higher and the difference in $T_{C,zero}$. was negligible. Optimally processed YBCO coated conductor exhibited $J_C$ value of $0.75MA/cm^2$ at 77 K in self-field, which might be due to somewhat depressed $T_{C,zero}$ of 87.3 K caused by possible $Sm^{3+}$ substitution on the $Ba^{2+}$ site.