• 제목/요약/키워드: $SiO_2$ impurity

검색결과 92건 처리시간 0.022초

$(Ba_{0.93}Sr_{0.07}O)-0.5Sm_2O_3-4.5TiO_2$계 세라믹스의 불순물 첨가에 따른 마이크로파 유전특성 (Effect of Impurity Addition on the Microwave Dielectric Properties of $(Ba_{0.93}Sr_{0.07}O)-0.5Sm_2O_3-4.5TiO_2$ Ceramics)

  • 김태중;장재훈;이희영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
    • /
    • pp.1148-1151
    • /
    • 2002
  • Dielectric ceramics with nominal composition of $(Ba_{0.93}Sr_{0.07}O)-0.5Sm_2O_3-4.5TiO_2$ was prepared using the conventional mixed oxide process-derived powder. Effect of $SiO_2$, $MnO_2$ and $Al_2O_3$ impurity addition on the microwave properties was examined in some detail. Measured relative permittivity $(\varepsilon_r)$ values were in the range of 53 to 59 and showed little dependence on impurity addition. In contrast, quality factor $(Q{\cdot}f)$ and temperature coefficient of resonant frequency $(\tau_f)$ values were greatly influenced by the type and the amount of impurities. It was found that 0.1~0.2wt% addition of $Al_2O_3$ was most effective for improving the properties, where ${\varepsilon}_r$, $Q{\cdot}f$ and $\tau_f$ values were 57.7, 10000, and +7ppm/$^{\circ}C$, respectively.

  • PDF

XPS와 SIMS를 이용한 PSG/SiO2/Al-1%Si 적층 박막내의 Na 게터링 분석 (Analysis of the Na Gettering in PSG/SiO2/Al-1%Si Multilevel Thin Films using XPS and SIMS)

  • 김진영
    • 한국표면공학회지
    • /
    • 제49권5호
    • /
    • pp.467-471
    • /
    • 2016
  • In order to investigate the Na gettering, PSG/$SiO_2$/Al-1%Si multilevel thin films were fabricated. DC magnetron sputter techniques and APCVD (atmosphere pressure chemical vapor deposition) were utilized for the deposition of Al-1%Si thin films and PSG/$SiO_2$ passivations, respectively. Heat treatment was carried out at $300^{\circ}C$ for 5 h in air. SIMS (secondary ion mass spectrometry) depth profiling and XPS (X-ray Photoelectron Spectroscopy) analysis were used to determine the distribution and binding energies of Na, Al, Si, O, P and other elements throughout the PSG/$SiO_2$/Al-1%Si multilevel thin films. Na peaks were mainly observed at the the PSG/$SiO_2$ interface and at the $SiO_2$/Al-1%Si interfaces. Na impurity gettering in PSG/$SiO_2$/Al-1%Si multilevel thin films is considered to be caused by a segregation type of gettering. The chemical state of Si and O elements in PSG passivation appears to be $SiO_2$.

텅스텐 실리사이드 상의 얇은 $SiO_2/Si_3N_4$ 막의 특성 평가 (Characterization of Thin $SiO_2/Si_3N_4$ Film on $WSi_2$)

  • 구경원;홍봉식
    • 한국진공학회지
    • /
    • 제1권1호
    • /
    • pp.183-189
    • /
    • 1992
  • 텅스텐 실리사이드를 축적전극으로 하는 얇은 N/O(SiO2/Si3N4) 구조막의 특성을 다 결성 실리콘의 경우와 비교 평가하였다. 누설전류 및 항복전압이 향상되었고 축적용량은 감 소하였다. 용량 감소의 원인중의 하나는 텅스텐 실리사이드 상의 산화막 성장률이 다결성 실리콘 위에서 보다 빠른 것이고 둘째는 열처리에 따라 다결정 실리콘 내 도판트 불순물이 텅스텐 실리사이드를 통하여 외향확산하여 다결정 실리콘 내에 공핍층을 형성하게 되고 공 핍층 용량으로 인하여 축적용량이 감소하게 된다.

  • PDF

금속 불순물 Ca이 Si 기판의 표면 미세 거칠기에 미치는 영향 (The Effect on the Microroughness of Si Substrate by Metallic Impurity Ca)

  • 최형석;전형탁
    • 한국재료학회지
    • /
    • 제9권5호
    • /
    • pp.491-495
    • /
    • 1999
  • In this study, we focus on Ca contaminant which affects on the roughness Si substrate after thermal process. The initial Si substrates were contaminated intentionally by using a standard Ca solution. The contamination levels of Ca impurity were measured by TXRF and the chemical composition of that was analyzed by AES. Then we gre the thermal oxide to investigate the effect of Ca contaminants. The microroughness of the Si surface, the thermal oxide surface, and the surface after removing the thermal oxide were measured to examine the electrical characteristics. The initial substrates that were contaminated with the standard solution of Ca exhibited the contamination levels of 10\ulcorner~10\ulcorneratoms/$\textrm{cm}^2$ which was measured by TXRF. The Ca contaminants were detected by AES and exhibited the peaks of Ca, SI, C and O.After intentional contamination, the surface microroughness of this initial substrate was increased from $1.5\AA$ to 4$\AA$ as contamination levels became higher. The microroughness of the thermal oxide surfaces of both contaminated and bare Si substrates exhibits similar values. But the microroughness of the contaminated$ Si/SiO_2$ interface was increased as contamination increased. The thermal oxide of contaminated substrate exhibited the small minority carrier diffusion length, low breakdown voltage, and slightly high leakage current.

  • PDF

ECR-플라즈마 화학 증착법에 의해 제조된 $Ta_2O_5$ 박막의 유전 특성 (Dielectric Characteristics of $Ta_2O_5$ Thin Films Prepared by ECR-PECVD)

  • 조복원;안성덕;이원종
    • 한국세라믹학회지
    • /
    • 제31권11호
    • /
    • pp.1330-1336
    • /
    • 1994
  • Ta2O5 films were deposited on the p-Si(100) substrates by ECR-PECVD and annealed in O2 atmosphere. The thicknesses of Ta2O5/SiO2 layers were measured by an ellipsometer and a cross-sectional TEM. Annealing in O2 atmosphere enhanced the stoichiometry of the Ta2O5 film and reduced the impurity carbon content. Ta2O5 films were crystallized at the annealing temperatures above 75$0^{\circ}C$. The best leakage current characteristics and the maximum dielectric constant of Ta2O5/SiO2 film capacitor were observed in the specimen annealed at $700^{\circ}C$ and 75$0^{\circ}C$, respectively. The flat band voltage of the Al/Ta2O5/SiO2/p-Si MOS capacitor was varied in the range of -0.6~-1.6 V with the annealing temperature. The conduction mechanism in the Ta2O5 film, the variation of the effective oxide charge density with the annealing temperature, and the effective electric field distribution in the Ta2O5/SiO2 double layer were also discussed.

  • PDF

SiC/$SiO_2$ 계면의 고온 기공발생에 관한 열역학적 계산 (Thermodynamic Calculations of High Temperature Bubble Formation at SiC/$SiO_2$ Interface)

  • 이문희;박종욱
    • 한국세라믹학회지
    • /
    • 제27권4호
    • /
    • pp.543-547
    • /
    • 1990
  • Numerous researchers have observed the bubble fromation at SiC/SiO2 interface from 130$0^{\circ}C$ to 1$700^{\circ}C$. According to thermodynamic calculation, the bubble could be formed from the microscopic impurities which result from the chemical vapor deposition of SiC. When C-impurity is present at the interface, it is calculated that the bubble is formed at 1511$^{\circ}C$ and when Si is present, the bubble is formed at 177$0^{\circ}C$. These results are very close to the prior observations, but the calculation can not explain the observation of bubble below 150$0^{\circ}C$.

  • PDF

$Sb_2O_3$첨가량에 의한 Barium-Titanates의 전기적 성질 (Electrical Properties of Barium-Titanates with addition $Sb_2O_3$)

  • 박창엽;왕진석;김현재
    • 대한전자공학회논문지
    • /
    • 제14권1호
    • /
    • pp.5-14
    • /
    • 1977
  • 공기중의 열처리에 의하여 상온에서 낮은 저항을 갖는 PTC 써미스터를 제작했다. 재현성을 높이기 위해 BaTiO3에 Al2O3, SiO2 및 TiO2를 첨가 했으며, 불순물로서 Sb2O3를 첨가했다. 시편은 공기 중에서 1,200℃∼1,380℃로서 가열되었으며, Sb2O3첨가량에 대한 저항관계를 조사했다. 이 시편들은 공기중의 열처리에서도 재현성이 좋았다. 연구된 시편은 3.75mole% Al2O3, 1.25mole% SiO2, 2.25mole% TiO2 및 0.16∼0.25wt% Sb2O3를 BaTiO3에 첨가하여 만들었으며 저항값은 14∼300ohm이었다.

  • PDF

재산화된 질화 산화막을 게이트 절연막으로 사용한 MOSFET의 특성 (The Characteristics of MOSFET with Reoxidized Nitrided Oxide Gate Dielectrics)

  • 양광선;박훈수;김봉렬
    • 전자공학회논문지A
    • /
    • 제28A권9호
    • /
    • pp.736-742
    • /
    • 1991
  • N$^{+}$poly gate NMOSFETs and p$^{+}$ poly gate (surface type) PMOSFETs with three different gate oxides(SiO2, NO, and ONO) were fabricated. The rapid thermal nitridation and reoxidation techniques have been applied to gate oxide formation. The current drivability of the ONO NMOSFET shows larger values than that of the SiO2 NMOSFET. The snap-back occurs at a lower drain voltage for SiO$_2$ cases for ONO NMOSFET. Under the maximum substrate current bias conditions, hot-carrier effects inducting threshold voltage shift and transconductance degradation were investigated. The results indicate that ONO films exhibit less degradation in terms of threshold voltage shift. It was confirmed that the ONO samples achieve good improvement of hot-carrier immunity. In a SiO$_2$ SC-PMOSFET, with significant boron penetration, it becomes a depletion type (normally-on). But ONO films show excellent impurity barrier properties to boron penetration from the gate.

  • PDF

박막트랜지스터 응용을 위한 SiO2 박막 특성 연구 (Studies for Improvement in SiO2 Film Property for Thin Film Transistor)

  • 서창기;심명석;이준신
    • 한국전기전자재료학회논문지
    • /
    • 제17권6호
    • /
    • pp.580-585
    • /
    • 2004
  • Silicon dioxide (SiO$_2$) is widely used as a gate dielectric material for thin film transistors (TFT) and semiconductor devices. In this paper, SiO$_2$ films were grown by APCVD(Atmospheric Pressure chemical vapor deposition) at the high temperature. Experimental investigations were carried out as a function of $O_2$ gas flow ratios from 0 to 200 1pm. This article presents the SiO$_2$ gate dielectric studies in terms of deposition rate, refrative index, FT-IR, C-V for the gate dielectric layer of thin film transistor applications. We also study defect passivation technique for improvement interface or surface properties in thin films. Our passivation technique is Forming Gas Annealing treatment. FGA acts passivation of interface and surface impurity or defects in SiO$_2$ film. We used RTP system for FGA and gained results that reduced surface fixed charge and trap density of midgap value.

SI 열화학 수소 제조 공정에서 분젠 반응을 통한 상 분리 특성 (Phase Separation Characteristics via Bunsen Reaction in Sulfur-Iodine Thermochemical Hydrogen Production Process)

  • 이광진;김영호;박주식;배기광
    • 한국수소및신에너지학회논문집
    • /
    • 제19권5호
    • /
    • pp.386-393
    • /
    • 2008
  • The Sulfur-iodine(SI) thermochemical cycle is one of the most promising methods for massive hydrogen production. For the purpose of continuous operation of SI cycle, phase separation characteristics into two liquid phases ($H_2SO_4$-rich phase and $HI_x$-rich phase) were directly investigated via Bunsen reaction. The experiments for Bunsen reaction were carried out in the temperature range, from 298 to 333 K, and in the $I_2/H_2O$ molar ratio of $0.109{\sim}0.297$ under a continuous flow of $SO_2$ gas. As the results, solubility of $SO_2$, decreased with increasing the temperature, had considerable influence on the global composition in the Bunsen reaction system. The amounts of impurity in each phase(HI and $I_2$ in $H_2SO_4$-rich phase and $H_2SO_4$ in $HI_x$-rich phase) were decreased with increasing $H_2SO_4$ molar ratio and temperature. To control the amounts of impurity in $HI_x$-rich phase, temperature is a factor more important than $I_2/H2_O$ molar ratio. On the other hand, the affinity between $HI_x$ and $H_2O$ was increased with increasing $I_2/H2_O$molar ratio.