• 대한화학회지
• /
• 제47권6호
• /
• pp.619-624
• /
• 2003

졸겔법을 사용하여 $Gd_{1.9-x}Li_{0.1}Eu_xO_3$(x=0.02, 0.05, 0.08, 0.12) 형광체 분말을 합성하였다. 형광체 입자의 표면을 나노 크기의 $SiO_2$(입자크기${\thickapprox}30 nm$)로 코팅한 후 스핀-코팅법으로 유리 기판에 형광체 막을 제작하였다. 유리의 연화온도인 $700^{\circ}C$ 부근에서 융착 되는 $SiO_2$ 나노 입자들에 의해 $Gd_{1.9-x}Li_{0.1}Eu_xO_3$ 입자들은 유리 기판 표면 위에 강하게 융착 되었다(>9H, 연필 경도계). 본 연구에서 채택한, 형광체 막을 제조하는 간단하고 비용이 저렴한 이 방법은 디스플레이장치의 응용 분야에 적용될 수 있을 것으로 생각한다.

• 한국응용과학기술학회지
• /
• 제22권3호
• /
• pp.281-288
• /
• 2005

The silica nanoparticles were used as support of catalyst, filling material, electronic assembler, thin film material, and sensor material. And, the titania nanoparticles were used as pigment, dielectric substance, sensor and photocatalyst. In this paper, the spherical composite particles of $TiO_2/SiO_2$with narrow size distribution and phase pure were synthesized by ultrasonic spray pyrolysis method from $TiOSO_4$ and colloidal silica solution. Using ultrasonic apparatus, this starting solution was vaporized to droplets, and these droplets were induced into tube furnace by carrier gas. The resulting composite powder was characterized by scanning electron microscopy, X-ray diffraction analysis, TG-DTA, in vitro sun protection factor(SPF) and BET surface area analysis.

• 한국재료학회지
• /
• 제18권7호
• /
• pp.379-383
• /
• 2008

We report on the light-emitting diode (LED) characteristics of core-shell CdSe/ZnS nanocrystal quantum dots (QDs) embedded in $TiO_2$thin films on a Si substrate. A simple p-n junction could be formed when nanocrystal QDs on a p-type Si substrate were embedded in ${\sim}5\;nm$ thick $TiO_2$ thin film, which is inherently an n-type semiconductor. The $TiO_2$ thin film was deposited over QDs at $200^{\circ}C$ using plasma-enhanced metallorganic chemical vapor deposition. The LED structure of $TiO_2$/QDs/Si showed typical p-n diode currentvoltage and electroluminescence characteristics. The colloidal core-shell CdSe/ZnS QDs were synthesized via pyrolysis in the range of $220-280^{\circ}C$. Pyrolysis conditions were optimized through systematic studies as functions of synthesis temperature, reaction time, and surfactant amount.

• Journal of Information Display
• /
• 제2권4호
• /
• pp.57-62
• /
• 2001

Green-emitting $Zn_2SiO_4$:Mn phosphor particles having a spherical shape and high luminescence intensities under VUV were prepared by spray pyrolysis process under severe preparation conditions. The type of precursor solutions affected the morphology and luminescence characteristics of the prepared particles. The particles prepared from the clear solution by laboratory-scale process had spherical shape and dense morphology, while the particles prepared from the severe preparation conditions had rough surface and collapsed structure. However, the particles prepared from the colloidal solution utilizing fumed silica were spherical in shape and filled morphology at the severe preparation conditions of high flow rate of carrier gas, high concentration of solution, and large reactor size. The prepared $Zn_2SiO_4$:Mn phosphor particles with complete spherical shape had higher photoluminescence intensity than that of the commercial product prepared by solid state reaction.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.511-515
• /
• 2014

The thermodynamic instability of bubbles in wet-foam colloidal suspension is due to the substantial area of their gas/liquid interface. Several physical processes lead to gas diffusion from smaller to larger bubbles, resulting in a coarsening and Ostwald ripening of wet foam. This includes a narrowing of the bubble size distribution. The distribution and microstructure of porous ceramics, the adsorption free energy and Laplace pressure of $Al_2O_3$ particle-stabilized colloidal suspension, and $SiO_2$ content were investigated for tailoring the bubble size. Wet-foam stability of more than 80% is related to the degree of hydrophobicity with contact angles of $62-70^{\circ}$ achieved from the surfactant. The contact angle replaces part of the highly energetic interface and lowers the free energy of the system. This leads to an apparent increase in the surface tension (26-33 mN/m) of the colloidal suspension.

• 센서학회지
• /
• 제32권3호
• /
• pp.154-158
• /
• 2023

This study aimed to improve the moisture resistance of salt cores by investigating the suitability of a two-dimensional kaolinite colloidal solution and a commercially available SiO₂ ink solution as coating agents. X-ray diffraction analysis (XRD) results showed that the intercalation of urea into kaolinite did not significantly change its layer structure. Scanning electron microscopy (SEM) images revealed that the dip-coating only affected the surface of the salt core, and the texture of the surface is differ depending on the coating solution. The humidity absorption test results showed that both coatings reduced the hygroscopicity of the salt core by more than 50%. However, in the water-solubility test, the kaolinite dissolved with the salt core, whereas the SiO₂-coated salt core left a residue. These results strongly suggest that with the coating of the exfoliated kaolinite solution, salt core will remain stable in humid environments.

• 동력기계공학회지
• /
• 제12권3호
• /
• pp.50-54
• /
• 2008

Various Sialon ceramics were fabricated by hot-pressing mixtures of $Si_3N_4$ with additive $Y_2O_3$ and $Al_2O_3$. The polished specimen of SiAlON $I{\sim}III$ went on increasing in strength by heat treatment, heat treated non-polished specimen were similar or up to polished specimen in strength. The polished specimen of both SiAlON IV and V showed a very high strength, but were not Increasing of strength by heat treatment. All specimens were fractured on the surface and at the inner flaws. Surface fractures were initiated from the polished surface flaw and corner flaw. Inner fractures were initiated from an internal defect.

• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.915-920
• /
• 1996

콜로이드 졸-겔법에 의해 초미립자 mullite 분말을 제조하였다. Al2O3의 출발 물질로 aluminum isopropoxide $[Al(i-OC_3H_7)_3]$을, $SiO_2$ 출발 물질로 규산 나트륨으로부터 tetrahydrofuran(이후 THF로 약기함)으로 추출한 규산을 사용하였다. 규산 나트륨은 규산을 생성시키기 위하여 묽은 황산으로 산성화시킨 다음 THF로 추출하였다. Mullite 분말은 졸-겔법에 의해서 Si 추출율와 Na 제거율을 조사한 규산과 aluminum isopropoxide로 부터 합성되었다. THF로 추출한 규산의 불순물 함량은 0.04% 이하이었다. 합성된 mullite 분말은 $3Al_2O_3{\cdot}2SiO_2$ 조성을 갖고 불순물의 함량은 0.0462% 이하의 직경 $0.05{\mu}m$ 정도의 결정상이었다. EDS, XRD, TG/DSC, SEM, FT-IR, ICP, TEM등으로 mullite 분말의 특성을 조사하였다.

• Advances in nano research
• /
• 제13권1호
• /
• pp.13-28
• /
• 2022

The pumpability of the grouts is significant issue in concept of the rheological and workability properties during penetrating to voids and cracks. To improve the fluidity features of the grout mixes, the usage of Colloidal Nano Particular Powders (CNPPs) with mineral additives such as fly ash (FA) can contribute. Therefore, the main purpose of this study can be explained as investigating the usage effects of four types of Colloidal Nano Particular Powders (n-TiO₂, n-ZnO, n-Al₂O₃ and n-SiO₂) as nano additives on the rheological, workability and bleeding properties of cement-based grout incorporated with fly as. Test results showed that the usage of FA in the grout samples positively contribute to increase on the fluidity of the grout samples as expected. The dilatant behavior was observed from the results for all mixes. Observing the effect of nano-sized additives in such cement-based grout mixtures with high fluidity has presented remarkable effects in this study.

• 공업화학
• /
• 제21권4호
• /
• pp.417-423
• /
• 2010

파라자일렌(p-xylene) 분리용 흡착제로서 효과적인 그래뉼 형태의 바인더리스 ZSM-5 성형체를 제조하는 방법을 검토하였다. $SiO_2/Al_2O_3$ = 50인 ZSM-5 결정분말에 무기 바인더인 colloidal silica sol 30 wt% 용액과 유기첨가물인 microcrystalline cellulose를 첨가하여 구형화한 후, 소성, 바인더리스 처리, ${NH_4}^+$ 이온교환, 활성화 등의 과정을 거쳐 충분한 강도(0.721 kgf) 및 높은 결정화도(94.6%)와 넓은 BET 비표면적($379.2m^2$/g)을 갖는 흡착제를 제조하였다. 제조된 성형체의 흡착특성을 평가하기 위해 자일렌 3가지 이성질체를 1 : 1 : 1의 무게비로 혼합하여 $100^{\circ}C$에서 회분식 흡착실험을 수행한 결과 제조된 바인더리스 ZSM-5 성형체는 상용흡착제보다 파라자일렌에 대해 높은 선택적 흡착성능을 나타냈다.