• 대한기계학회논문집A
• /
• 제38권10호
• /
• pp.1117-1123
• /
• 2014

본 연구는 균열 치유 물질로 알려진 $SiO_2$ 나노 콜로이드의 첨가량을 달리한 $Si_3N_4$를 소결하여, 경면 연마한 시험편 표면에 $SiO_2$ 나노 콜로이드를 코팅하여 1273 K, 공기중에서 1시간 균열치유 처리하였다. 그 후, 마모시험편은 1073, 1273 및 1573 K에서 10분간 열처리하여 시험을 실시하였다. $SiO_2$ 나노 콜로이드를 코팅하여 열처리한 표면은 무코팅 표면보다 약간 거칠게 나타났으며, 열처리 온도에 따라 표면의 산화 정도는 조도와 뚜렷한 상관관계는 가지지 않았다. 그리고 마찰계수, 마모손실 및 굽힘강도는 표면 거칠기와 관계가 없었다. SKD11 상대재에 대하여 연삭마모의 거동을 보였으며, 마찰계수와 마모손실은 비례하였다. 또한, 강도가 클수록 마찰계수가 작고, 마모손실도 작았다. $SiO_2$ 나노 콜로이드 량의 증가에 따라서 마찰계수는 증가하다가 일정하게 되었지만, 마모손실은 증가하였다. 또한 열처리 온도가 증가함에 따라서 마찰계수는 약간 증가하는 경향을 나타내었다.

• 동력기계공학회지
• /
• 제19권1호
• /
• pp.45-49
• /
• 2015

This study focuses on the crack-healing behavior and bending strength of SiC ceramics with sintering additives of $SiO_2$colloid. Optimized crack-healing condition was found to be 1hr at an atmosphere of 1373 K. The maximum crack size that can be healed at the optimized condition was a semi-elliptical surface crack of $450{\mu}m$ in diameter. After heat treatment at the optimum temperature in air, the crack morphology almost entirely disappeared and the strength recovered to the value of the smooth specimens at room temperature for the investigated crack sizes up to $450{\mu}m$. The crack with width $1.4{\mu}m$ can be completely heal the surface crack.

• Advances in nano research
• /
• 제1권3호
• /
• pp.159-169
• /
• 2013

A preparation method for gadolinium compound (GdC) nanoparticles coated with silica ($GdC/SiO_2$) is proposed. GdC nanoparticles were prepared with a homogeneous precipitation method at $80^{\circ}C$ using $1.0{\times}10^{-3}$ M $Gd(NO_3)_3$, 0.5 M urea and $0-3.0{\times}10^{-4}$ M ethylenediarinnetetraacetic acid disodium salt dihydrate (ETDA) in water. As a result of preparation at various EDTA concentrations, GdC nanoparticles with a size as small as $40.5{\pm}6.2$ nm, which were colloidally stable, were prepared at an EDTA concentration of $2.0{\times}10^{-4}$ M. Silica-coating of the GdC nanoparticles was performed by a St$\ddot{o}$ber method at $35^{\circ}C$ using $1.0-10.0{\times}10^{-3}$ M tetraethylorthosilicate (TEOS), 11 M $H_2O$ and $1.5{\times}10^{-3}$ M NaOH in ethanol in the presence of $1.0{\times}10^{-3}$ M GdC nanoparticles. Performance of preparation at various TEOS concentrations resulted in production of $GdC/SiO_2$ particles with an average size of $106.1{\pm}11.2$ nm at a TEOS concentration of $5.0{\times}10^{-3}$ M. The gadolinium (Gd) concentration of $1.0{\times}10^{-3}$ M in the as-prepared $GdC/SiO_2$ particle colloid solution was increased up to a Gd concentration of 0.2 M by concentrating with centrifugation. The core-shell structure of $GdC/SiO_2$ particles was undamaged, and the colloid solution was still colloidally stable, even after the concentrating process. The concentrated $GdC/SiO_2$ colloid solution showed images of X-ray and magnetic resonance with contrast as high as commercial Gd complex contrast agents.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.472-477
• /
• 2009

Monodisperse spherical $SiO_2$ particles of various sizes ($\sim$350 nm and $\sim$800 nm) and size distributions were synthesized from TEOS and MTMS. The particle size and size distribution were controlled by changing the volume ratio of water to ethanol and the reaction temperature. Narrow-sized $SiO_2$ particles with $\sim$3% size distribution were obtained. Self-assembly of the $SiO_2$ particles for photonic crystals were performed by the solvent evaporation method. The number of ordered $SiO_2$ layers can be controlled by changing the amount of the dispersed $SiO_2$ volume fraction in the solvent.

• 전자공학회논문지A
• /
• 제29A권4호
• /
• pp.22-27
• /
• 1992

The cyclic voltammogram characteristics at the magnetized SrO${\cdot}6Fe_{2}O_{3}$ ceramics/(($10^{-3}$M KCI + p-Si powders) and /(($10^{-4}$M CsNO$_3$ + n-GaAs powders) suspension interfaces have been studied using the microelectrophoresis and the cyclic voltammetric method. The negatively charged ions are specifically absorbed on the virgin and the magnetized SrO${\cdot}6Fe_{2}O_{3}$ ceramics surfaces. The zeta potentials of the p-Si and n-GaAs colloidal semiconductors are + 41mV and -44.8mV, respectively. The magnetization effects act as potential barriers at the magnetized SrO${\cdot}6Fe_{2}O_{3}$ interfaces. The positivelely charged p-Si and the negatively charged n-GaAs colloidal semiconductors act as potential barriers at the virgin SrO${\cdot}6Fe_{2}O_{3}$ interfaces. On the other hand, the charged p-Si and n-GaAs colloidal semiconductors act as potential barrier scavengers at the magnetized SrO${\cdot}6Fe_{2}O_{3}$ interfaces. The magnetization effects and the charged colloidal semiconductor effects are irreversible and interdependent.

• 한국세라믹학회지
• /
• 제41권4호
• /
• pp.297-301
• /
• 2004

분무연소합성법을 이용하여 나노크기의 물라이트(3Al$_2$O$_3$$.$2SiO$_2$) 콜로이드를 제조하였다. 연소반응을 위한 산화제로서 Al(NO$_3$)$_3$$.$9$H_2O$와 환원제(연료)로서 CH$_{6}$N$_4$O를 사용하였으며, 실리카 소스로서 콜로이드 실리카를 첨가하였다. 분무된 액적들의 착화를 위해 연소반응기의 온도를 80$0^{\circ}C$로 유지하였다. 액적의 응고에 의한 액적크기 성장을 억제하기 위하여 금속 스크린 필터를 사용함으로써 액적의 개수 농도를 감소시켰으며, 에어로졸 입자의 체류시간을 2.5초로 유지하여 열 유체의 흐름을 층류로 유도하였다. 제조된 입자들의 모양은 모두 구형이었으며, 평균입자크기는 130nm이었다 XRD와 TEM 분석 결과 각각의 초미립자들은 정량화합물의 물라이트 결정성을 나타내었다.

• 동력기계공학회지
• /
• 제17권4호
• /
• pp.94-102
• /
• 2013

Manufactured $SiC_f/SiC$ composites by NITE method was investigated fracture characteristics according to the size of the surface crack. Coated surface crack with a $SiO_2$ colloid in several ways was evaluating the possibility of healing. The strength of CCS and UCS is 313 and 230MPa, respectively and it is about 1/3 of the SPS. Bending strength of $SiC_f/SiC$ composites has no effect with the pre-crack size to the critical crack size. $SiC_f/SiC$ composites can not generate large amount of $SiO_2$ oxides to the bottom of crack, and is only generated randomly on surfaces, and can not contribute to the recovery of bending strength.

• Corrosion Science and Technology
• /
• 제7권3호
• /
• pp.179-181
• /
• 2008

With nano-$SiO_2$ and sulphate acid, a kind of colloid electrolyte is synthesized by sol-gel method. It is placed outside the reference electrode as a layer of gel electrolyte so as to decrease the leaching of $Cu^{2+}$ and increase the life of the reference electrode. The performance of the gel electrode in simulating soil solution is measured as follows: the potential of the electrodes ranging from 60 mV to 80 mV (vs. SCE) with potential variation no more than $\pm10mV$, enough resistance to polarization. The $Cu^{2+}$ effusion rate of the reference electrode without gel electrolyte is 3 times that with colloid electrolyte, which means that gel electrolyte can extend the life of the reference electrode significantly.

• 유기물자원화
• /
• 제30권3호
• /
• pp.5-12
• /
• 2022

본 연구에서는 반도체를 포함한 다양한 산업 분야에서 발생하는 슬러지 폐기물을 활용하여 고부가 가치의 균일한 콜로이달 실리카 나노입자를 제조하고자 하였다. 상세히는 슬러지 폐기물에서 고분자를 용해하여 추출한 실리카(s-SiO₂)를 분리하였고, 암모니아와 소니케이터를 활용한 에칭을 통해 실라놀 전구체를 추출하였다. 실라놀 전구체를 활용하여 졸-겔법으로 균일한 약 50nm 크기의 실리카 나노입자(n-SiO₂)를 성공적으로 합성되었음을 확인할 수 있었다. 또한, s-SiO₂의 에칭 시간에 따른 n-SiO₂의 수득량을 확인하였으며, 8시간의 에칭 시간에서 가장 많은 n-SiO₂가 제조되는 것을 확인할 수 있었다. 최종적으로 n-SiO₂를 기반으로 한 CMP용 슬러리를 제조하여, 반도체 칩의 연마에 활용하였다. 그 결과, 반도체 칩의 표면에 존재하던 빗살 무늬의 데미지들이 성공적으로 제거되었으며, 이를 통해 슬러지 폐기물에서 고부가 가치의 반도체 급 n-SiO₂ 소재가 성공적으로 제조되었음을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.173-176
• /
• 2014

The hollow $SiO_2$ spheres with uniform size were synthesized by a modified Stober method under the control of polyelectrolytes (PSS and PAA) as templates. This synthetic route includes the formation of spherical colloid micelle in ethanol solution, hydrolysis of TEOS under control of ammonia, and the removal of polyelectrolyte by washing or calcination. Hollow silica spheres with controllable core diameters between 100 and 270 nm and wall thickness between 15 and 50 nm have been synthesized. The influence of template solution concentration and solvent and dispersant on the formation of silica hollow spheres is studied and reported in detail.