• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.199-211
• /
• 2006

Practical automated flat pattern generation with inbuilt production features for doubly curved sheet metal components (SMCs) is addressed here utilizing a new and unique Point Transformation Algorithm (PTA). This is the third in the series of papers on practical Flat Pattern Development (FPD) [8] and Production Loft Generation Systems (PLGS) [9] complementing the pioneering work [6,7]. In the first two publications, automated loft generation programs have addressed sheet metal components having a Principal Flat Surface (PFS) only. The flat pattern development of 3-D components that do not have the flat surface(termed as Non-PFS components) having complex features of double curvature in addition to cutouts and nibbled holes typical of aircraft components were so far not addressed due to lack of relevant published algorithms. This paper traces the evolution of developments and provides the record of fully illustrated, automated loft generation scheme for aircraft SMCs including the Non-PFS components which underwent validation through production tests by sponsors. Details of some of the unique features of the system like simplified surface model generation, termed as topological model and powerful algorithms deployed with potential for CAD/CAM applications are included.

• Journal of Welding and Joining
• /
• v.21 no.3
• /
• pp.51-57
• /
• 2003

The metal transfer in $CO_2$ welding shows the transition of transfer mode from short-circuiting to repelled transfer will the increase of welding current. While the short-circuiting mode in $CO_2$ welding has been studied very extensively relating with droplet formation and spatter generation, the repelled transfer has little been understood. In this study, high current $CO_2$ welding has been performed with bead-on-plate welds along with the waveform analyzer and high speed camera. The image of high speed camera was synchronized with its waveform so that the moment of spatter generation could be realized during drop detachment. As a results of this study, it was found that welding arc changes its location either once or three times and thus single or double pulse signals were developed in the voltage waveform. Whenever the arc moved its location, new arc was developed in a explosive way and thus it caused spatter generation. Specially severe spattering took place when the waveform showed a double-peak pattern. As a consequence of these results, new waveform control techniques could be suggested for suppressing the spatter generation in the high-current $CO_2$ welding.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.2
• /
• pp.7-14
• /
• 2016

In this paper presents a low power algorithm using a feasible cluster generation method considered glitch. The proposed algorithm is a method for reducing power consumption of a given circuit. The algorithm consists of a feasible cluster generation process and glitches removal process. So that glitches are not generated for the node to which the switching operation occurs most frequently in order to reduce the power consumption is a method for generating a feasible cluster. A feasible cluster generation process consisted of a node value set, dividing the node, the node aligned with the feasible cluster generation. A feasible cluster generation procedure is produced from the highest number of nodes in the output. When exceeding the number of OR-terms of the inputs of the selected node CLB prevents the signal path is varied by the evenly divided. If there are nodes with the same number of outputs selected by the first highest number of nodes in the input produces a feasible cluster. Glitch removal process removes glitches through the path balancing in the same manner as [5]. Experimental results were compared with the proposed algorithm [5]. Number of blocks has been increased by 5%, the power consumption was reduced by 3%.

• The KIPS Transactions:PartD
• /
• v.14D no.4 s.114
• /
• pp.389-394
• /
• 2007

This study suggests that it dynamically generates semantic Web services from Java and C++ components in order to supporting semantic Web service by using ontology. And the semantic Web should enable greater access not only to content but also to services on the Web. It needs semantic service discovery for components. So, we add ontology-based framework to Web service generation system from components. Especially, components and ontologies are transformed UML model so that it makes WSDL documents to support a generation of dynamic Web service using object modeling. The main contribution of this study is to generate web service dynamically from components and to support semantic Web environment by using ontology. In other words, this study integrates semantic Web service based on ontology and CBD method.

• Journal of Society of Preventive Korean Medicine
• /
• v.16 no.2
• /
• pp.95-111
• /
• 2012

Objective : The water extract of Danguiyonghoihwan (DGYHW) has been traditionally used in treatment of tinnitus in Oriental Medicine. However, little is known about the mechanism by which DGYHW rescues auditory neuronal cells from injury damages. Therefore, in this study I effort to elucidate the mechanism of the cytoprotective effect of the DGYHW extract on glutamate-induced auditory sensorineuronal cell death. Methods : I determined the elevated cell viability by DGYHW extract on glutamate-induced auditory sensorineuronal cell death. Glutamate induced neuronal damage in oranotypic explant culture also, glutamate decreased cell viability on VOT-33 cells but pretreatment with DGYHW inhibited cell death. Results : One of the main mediator of glutamate-induced cytotoxicity was known to generation of reactive oxygen species (ROS). Pretreatment with DGYHW inhibited this ROS generation from glutamated-stimulated VOT-33 cells. Also, I identified that the ROS-induced DCF-DA green fluorescence is reduced by DGYHW pretreatment. The critical markers of apoptotic cell death were cleavages of procaspase-3 protease protein. So I checked the expression level and cleavage of procaspase-3 protease protein. Glutamate-treated VOT-33 cells were shown to have cleavage of procaspase-3 protease proteins and following reduction of expression of these proteins. But I found that pre-treatment with DGYHW protects glutamate-induced changes of biochemical marker protein, caspase-3. Conclusion : These findings indicated that DGYHW may prevent cell death from glutamate induced VOT-33 cell death by inhibiting the ROS generation and modulation of protein expressions in procaspase-3, catalase and Bcl-2.

• Journal of Environmental Science International
• /
• v.18 no.11
• /
• pp.1235-1245
• /
• 2009

The purpose of this study is to investigate electro-generation of free Cl, $ClO_2$, $H_2O_2$ and $O_3$ and degradation of Rhodamine B in solution using Ru-Sn-Sb electrode. Electrolysis was performed in one-compartment reactor using a dimensionally stable anode(DSA) of Ru-Sn-Sb/Ti as the working electrode. The effect of applied current (0.5-3 A), electrolyte type (NaCl, KCl, HCl, $Na_2SO_4$ and $H_2SO_4$) and concentration (0.5-2.5 g/L), air flow rate (0-3 L/min) and solution pH (3-11) was evaluated. Experimental results showed that concentration of 4 oxidants was increased with increase of applied current, however optimum current for RhB degradation was 2 A. The generated oxidant concentration and RhB degradation of the of Cl type-electrolyte was higher than that of the sulfate type. The oxidant concentration was increased with increase of NaCl concentration and optimum NaCl dosage for RhB degradation was 1.75 g/L. Optimum air flow rate for the oxidants generation and RhB degradation was 2 L/min. $ClO_2$ and $H_2O_2$ generation was decreased with the increase of pH, whereas free Cl and $O_3$ was not affected by pH. RhB degradation was increase with the pH decrease.

• Archives of design research
• /
• v.14 no.3
• /
• pp.155-164
• /
• 2001

Under the ambiguous situation that Id character design aim is not defined, this study would help designers with 1. overcoming the limitation of character form generation ability by establishing visual application system, 2. accepting users'opinions by generating character images dynamically, analysing and giving information on the preferred ones on the web on real time, 3. identifying tendency of preference so that they can generate preferred colors and images in future by updating image combination and dropping low-preferred ones. this system would play a role as an idea or character form generation application in the 3d character design development process

• Journal of Sasang Constitutional Medicine
• /
• v.33 no.1
• /
• pp.22-37
• /
• 2021

Objectives The purpose of this study is to examine the characteristics of the experience prescription in 『Donguisusebowon(東醫壽世保元)』. Methods We examined the examples of the experience prescription in the pathology of 『Donguisusebowon』. Afterward, we considered the characteristics about the experience prescription of Junggyeong Jang and the Next Generation Doctors in 『Donguisusebowon』. Results and Conclusion 1. The Junggyeong Jang's experience prescription isn't modified despite the fact that it doesn't fit the constitutional disease and pharmacology, and many experience prescriptions are mentioned to in the pathology of 『Donguisusebowon』. But the Next Generation Doctors's experience prescription is modified, and a considerable number of experience prescriptions are not mentioned to in the pathology of 『Donguisusebowon』. 2. Jema Lee cited all of the Junggyeong Jang's experience prescription except Daesiho-tang(大柴胡湯) as an explanation for the constitutional disease, and cited a prescription that could not be used for the constitutional disease. And the pathological symptom of the Junggyeong Jang's experience prescription was used to establish the system of the Sasang Constitutional Medicine, so the Junggyeong Jang's experience prescription wasn't modifed. 3. Jema Lee cited a prescription that could be used for the constitutional disease. And the pharmacology of the Next Generation Doctors's experience prescription was used to establish the system of the Sasang Constitutional Medicine, so the Next Generation Doctors's experience prescription was modifed. 4. Jema Lee established the Sasang Constitutional Medicine based on the Existing Medicine. It was appeared in composition and name about the table of contents of the experience prescription in 『Donguisusebowon』.

• Journal of Internet Computing and Services
• /
• v.3 no.3
• /
• pp.95-104
• /
• 2002

The interworking for voice service between next generation mobile network and traditional network can be deployed better flexible and expansible network conditions with providing efficiency and economy of network at the same time. So it is essential to develop the interworking strategies together with a evolved network and traditional network. This paper describes a design and verification of internetworking protocol for CC of next generation mobile network and SIP of IP network for applying interworking technology to next generation mobile network, which can harmoniously expropraise voice service from traditional network.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.393-398
• /
• 2015

City or Community-scale Energy Management System(CEMS) is used to reduce the total energy consumed in the city by arranging the energy resources efficiently at the planning stage and controlling them economically at the operating stage. Of the operational functions of the CEMS, generation forecasting of renewable energy resources is an essential feature for the effective supply scheduling. This is because it can develop daily operating schedules of controllable generators in the city (e.g. diesel turbine, micro-gas turbine, ESS, CHP and so on) in order to minimize the inflow of the external power supply system, considering the amount of power generated by the uncontrollable renewable energy resources. This paper is written to introduce numerical models for photo-voltaic power generation prediction based on the weather forecasting information. Unlike the conventional methods using the average radiation or average utilization rate, the proposed models are developed for CEMS applications using the realtime weather forecast information provided by the National Weather Service.