• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.85-85
• /
• 1999

Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT)는 높은 유전율로 인해 강유전체 메모리 소자의 응용을 위한 연구가 되고 있으며 또한 전왜(electrostrictive)성을 갖고 있어 이력현상을 갖지 않음으로 최근 들어 미세전기기계소자(MEMS)로의 연구가 활발히 되고 있다. 본 연구에서는 MEMS 소자로서의 응용을 위해 저응력 SiNx가 형성된 Si 기판위에 Pt 전극 혹은 산화물 전극 SrRuO3를 갖는 PMN-PT 박막 캐패시터를 제조하였다. 박막 하부의 구조는 금속전극의 경우 Pt/Ti/LTO/SiNx/Si이고 산화물전극은 SrRuO3/Ru/SiNx/Si의 구조를 갖는다. PMN-PT 박막은 alkoxide를 기반으로 회전 coating 방법을 사용하여 박막 하부층의 변화를 주어서 성장시켰다. PMN-PT 용액의 합성은 분말합성법에서 사용하는 columbite 방법을 응용하여 상대적으로 반응정도가 낮은 Mg를 Nb와 우선 반응하여 Mg-Nb solution을 얻고 Pb-acetate 용액과 합성하여 PMN을 제조한 후 PT를 반응시켜서 제조하였다. PMN-PT 박막에서 동일한 공정조건 하에서 박막 하부층의 구조에 따라서 PMN-PT 박막의 조성이 A2B2O6의 조성을 가지는 파이로클러어상이 형성되거나 또는 ABO3인 페로브스카이트상이 형성되는 것을 관찰하였다. 금속 전극인 Pt를 하부전극으로 사용한 경우는 혼재상이 형성되어 패로브스카이드 PMN-PT를 얻기 위해 seed layer로서 PbTiO3를 사용하였으며 이러한 seed layer 위에 형성된 PMN-PT를 형성하는 경우 rutile 구조인 RuO2 위에 성장시킨 PMN-PT는 파이로클로어와 페로브스카이트의 혼재상이 얻어졌으나 pseudo-perovskite 구조인 SrRuO3 박막 위에 형성된 PMN-PT 박막에서는 페로브스카이트가 주된 상으로 얻어졌다. 즉 하부층(전극 또는 seed layer)으로 perovskite 구조를 갖는 박막을 형성하게 되면 페로브스카이트를 갖는 PMN-PT 박막을 얻을 수 있었다. 전기적인 특성은 상부전극으로 Pt를 사용하여 HP 4194A로 측정을 하였다. PT seed layer를 포함한 PMN-PT 박막은 유전상수 1086과 유전손실 2.75%을 가졌다.

• Analytical Science and Technology
• /
• v.28 no.1
• /
• pp.8-16
• /
• 2015

We prepared a novel electrochemical gas sensor (EG sensor) based on interdigitated electrode (IDE) coated with vinyl ionic liquids (ILs) as electrolyte and Pt-Ru-Mo/MWNT electrocatalysts for occurring redox-active of CNCl gas. The vinyl ILs such as 1-butyl-3-(vinylbenzyl)imidazolium chloride, $[BVBI]^+Cl^-$, and 3-hexyl-1-vinylimidazolium bromide, $[HVI]^+Br^-$, were synthesized by $SN_2$ reaction in order to use electrolyte. The Pt-Ru-Mo/MWNT electrocatalysts were also prepared by one-step radiation-induced reduction of metal ions in the presence of MWNTs as supports. The fabricated EG sensor with vinyl ILs electrolyte was evaluated through optical microscopy (OM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The prepared EG sensor is clearly detected over 2.0 ppm CNCl gas and is exhibited a liner relationship between current and concentration over a region of 10-100 ppm.

• Development and Reproduction
• /
• v.19 no.3
• /
• pp.135-144
• /
• 2015

Heat shock protein (HSP) 70, the highly conserved stress protein families, plays important roles in protecting cells against heat and other stresses in most animal species. In the present study, we identified and characterized four Hsp70 (RuHSP4, RuHSC70, RuHSP12A, RuGRP78) family proteins based on the expressed sequence tag (EST) analysis of the Korean rose bitterling R. uyekii cDNA library. The deduced RuHSP70 family has high amino acid identities of 72-99% with those of other species. Phylogenetic analysis revealed that RuHsp70 family clustered with fish groups (HSP4, HSC70, HSP12A, GRP78) proteins. Quantitative RT-PCR analysis showed the specific expression patterns of RuHsp70 family members in the early developmental stages and several tissues in Korean rose bitterling. The expression of 4 groups of Hsp70 family was detected in all tested tissue. Particularly, Hsp70 family of Korean rose bitterling is highly expressed in hepatopancreas and sexual gonad (testis and ovary). The expression of Hsp70 family was differentially regulated in accordance with early development stage of Rhodeus uyekii.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.5
• /
• pp.423-429
• /
• 2008

This work was carried out to improve the performance of anodic electrocatalysts in direct ethanol fuel cell(DEFC). PtRu and $Pt_5Ru_4M$(M= Ni, Sn, Mo and W) electrocatalysts were prepared by using a $NaBH_4$ reduction method. Alloy crystal structure and particle size of electrocatalysts were characterized by X-ray diffraction(XRD) and transmission electron microscopy(TEM). The XRD analysis of the electrocatalysts revealed that the face-centered cubic(fcc) peaks shifted to slightly higher diffraction angles when third metals were added. Average size of the uniform particles was observed to be approximately $3{\sim}3.5\;nm$ from the TEM image. The electrochemical measurements were carried out in the solution 1M $H_2SO_4$ and 1M $C_2H_5OH$ at room temperature. Cyclic-voltammogram results showed that $Pt_5Ru_4W$ electrocatalyst exhibited much higher current density for ethanol oxidation of $2.73\;mA/cm^2$ than PtRu electrocatalyst of $0.73\;mA/cm^2$.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.587-596
• /
• 2014

A new ${\pi}$-stacked donor-acceptor (D-A) system, [Ru(1-([2,2'-bipyridine]-6-yl-methyl)-3-(2-cyclohexa-2',5'-diene-1,4-dionyl)-1H-imidazole)(2,2':6',2"-terpyridine)]$[PF_6]_2$ (ImQ_T), has been synthesized and characterized. Similar to its precedent, [Ru(6-(2-cyclohexa-2',5'-diene-1,4-dione)-2,2':6',2"-terpyridine)(2,2':6',2"-terpyridine)]$[PF_6]_2$ (TQ_T), this system has a cofacial alignment of terpyridine (tpy) ligand and quinonyl (Q) group, which facilitates an electron transfer through ${\pi}$-stacked manifold. Despite the presence of lowest-energy charge transfer transition from the Ru-based-HOMO-to-Q-based-LUMO (MQCT) predicted by theoretical calculations by using time-dependent density functional theory (TD-DFT), the experimental steady-state absorption spectrum does not exhibit such a band. The selective excitation to the Ru-based occupied orbitals-to-tpy-based virtual orbital MLCT state was thus possible, from which charge separation (CS) reaction occurred. The photo-induced CS and thermal charge recombination (CR) reactions were probed by using ultrafast visible-pump/mid-IR-probe (TrIR) spectroscopic method. Analysis of decay kinetics of Q and $Q^-$ state CO stretching modes as well as aromatic C=C stretching mode of tpy ligand gave time constants of <1 ps for CS, 1-3 ps for CR, and 10-20 ps for vibrational cooling processes. The electron transfer pathway was revealed to be Ru-tpy-Q rather than Ru-bpy-imidazol-Q.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.11a
• /
• pp.57-57
• /
• 1998

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.10
• /
• pp.620-624
• /
• 2016

Ferroelectric $Pb(Zr_{0.52}Ti_{0.48})O_3$ (PZT) films were deposited on SrTiO3(100) substrate by using conductive $SrRuO_3$ films as underlayer and their structural and ferroelectric properties were investigated. PZT films were grown in (00l) orientation on well lattice-matched pseudo-cubic $SrRuO_3$ films. Thickness dependence of ferroelectric and electrical properties of PZT films was investigated. PZT film with 400 nm thickness showed a remanent polarization ($P_r$) of $29.0{\mu}C/cm^2$ and coercive field ($E_c$) of 83 kV/cm, and $P_r$ decreased and $E_c$ increased with thickness reduction. The dielectric constant for PZT films showed gradual decrease with thickness reduction. Breakdown field of PZT films did not show the thickness dependence and displayed as high value as 1 MV/cm.

• Clean Technology
• /
• v.25 no.3
• /
• pp.256-262
• /
• 2019

Hydroxylammonium nitrate (HAN)-based liquid propellants are attracting attention as environmentally friendly propellants because they are not carcinogens and the combustion gases have little toxicity. The catalyst used to decompose the HAN-based liquid propellant in a thruster must have both low temperature activity and high heat resistance. The objective of this study is to prepare an Ru/alumina/metal foam catalyst by supporting alumina slurry on the surface of NiCrAl metal foam using a washing coating method and then to support a ruthenium precursor thereon. The decomposition activity of a HAN aqueous solution of the Ru/alumina/metal foam catalyst was evaluated. The effect of the number of repetitive coatings of alumina slurry on the physical properties of the alumina/metal foam was analyzed. As the number of alumina wash coatings increased, mesopores with a diameter of about 7 nm were well-developed, thereby increasing the surface area and pore volume. It was optimal to repeat the wash coating alumina on the metal foam 12 times to maximize the surface area and pore volume of the alumina/metal foam. Mesopores were also well developed on the surface of the Ru/alumina/metal foam catalyst. It was found that the metal form itself without the active metal and alumina can promote the decomposition reaction of the HAN aqueous solution. In the case of the Ru/alumina/metal foam-550 catalyst, the decomposition onset temperature was significantly lowered compared with that of the thermal decomposition reaction, and ${\Delta}P$ could be greatly increased in the decomposition of the HAN aqueous solution. However, when the catalyst was calcined at $1,200^{\circ}C$, the catalytic activity was lowered inevitably because the surface area and pore volume of the catalyst were drastically reduced and Ru was sintered. Further research is needed to improve the heat resistance of Ru/alumina/metal foam catalysts.

• Clean Technology
• /
• v.23 no.3
• /
• pp.314-324
• /
• 2017

To verify the viability of Co, Ru and Zr-based catalyst for $CO_2$ (dry) reforming reaction, catalysts were fabricated using cordierite, silicon carbide and rota monolithic substrates, and they were compared with the conventional $Co-Ru-Zr/SiO_2$ catalyst in terms of performance and durability. Cordierite monolith was showed high activity with the least amount of active component. In addition, when Cordierite monolith was coated with Co-Ru-Zr in various ways, most excellent performance was showed at a precursor solution coating method. In particular, when 0.9 wt% Co-Ru-Zr/Cordierite was used for reaction, it was observed that 95% $CO_2$ conversion was maintained for 300 h at $900^{\circ}C$.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.3-11
• /
• 2012

Some methods used for the recovery of osmium and ruthenium from primary/secondary sources are reviewed. Both Ru and Os could form volatile oxides which enable their separation from the other PGMs by distillation as a traditional method. In hydrochloric acid solution, they also form chloro-complexes with different valence states. Amines or amine based mixture have been used to extract Ru. Solvating extractants are employed to separate Ru and Os. The detailed extraction and stripping conditions of several solvent extraction processes have been reviewed. As an alternative to solvent extraction, solid-liquid method can be applied to recover trace amount of these metals.