• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.46-55
• /
• 2000

During bonding procedure of composite resin, the prepared cavity can be contaminated by saliva. In this study, marginal microleakage and shear bond strength of a composite resin to primed enamel and dentin treated with artificial saliva(Taliva$^{(R)}$) were evaluated. For the marginal microleakage test, Class V cavities were prepared in the buccal surfaces of fifty molars. The samples were randomly assigned into 5 groups with 10 samples in each group. Control group was applied with a bonding system (Scotchbond$^{TM}$ Multi-Purpose plus) according to manufacture's directions without saliva contamination. Experimental groups were divided into 4 groups and contaminated with artificial saliva for 30 seconds after priming: Experimental 1 group ; artificial saliva was dried with compressed air only, Experimental 2 group ; artificial saliva was rinsed and dried. Experimental 3 group ; cavities were etched with 35% phosphoric acid for 15 seconds after rinsing and drying artificial saliva. Experimental 4 group ; cavities were etched with 35% phosphoric acid for 15 seconds and primer was reapplied after rinsing and drying artificial saliva. All the cavities were applied a bonding agent and filled with a composite resin (Z-100$^{TM}$). Specimens were immersed in 0.5% basic fuschin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from one specimen. Degree of marginal leakage was scored under stereomicroscope and their scores were averaged from four sections. The data were analyzed by Kruscal-Wallis test and Fisher's LSD. For the shear bond strength test, the buccal or occlusal surfaces of one hundred molar teeth were ground to expose enamel(n=50) or dentin(n=50) using diamond wheel saw and its surface was smoothed with Lapping and Polishing Machine(South Bay Technology Co., U.S.A.). Samples were divided into 5 groups. Treatment of saliva-contaminated enamel and dentin surfaces was same as the marginal microleakage test and composite resin was bonded via a gelatin capsule. All specimens were stored in distilled water for 48 hours. The shear bond strengths were measured by universal testing machine (AGS-1000 4D, Shimaduzu Co., Japan) with a crosshead speed of 5 mm/minute. Failure mode of fracture sites was examined under stereomicroscope. The data were analyzed by ANOVA and Tukey's studentized range test. The results of this study were as follows : 1. Enamel marginal microleakage showed no significant difference among groups. 2. Dentinal marginal microleakages of control, experimental 2 and 4 groups were lower than those of experimental 1 and 3 groups (p<0.05). 3. The shear bond strength to enamel was the highest value in control group (20.03${\pm}$4.47MPa) and the lowest value in experimental 1 group (13.28${\pm}$6.52MPa). There were significant differences between experimental 1 group and other groups (p<0.05). 4. The shear bond strength to dentin was higher in control group (17.87${\pm}$4.02MPa) and experimental 4 group (16.38${\pm}$3.23MPa) than in other groups, its value was low in experimental 1 group (3.95${\pm}$2.51 MPa) and experimental 2 group (6.72${\pm}$2.26MPa)(p<0.05). 5. Failure mode of fractured site on the enamel showed mostly adhesive failures in experimental 1 and 3 groups. 6. Failure mode of fractured site on the dentin did not show adhesive failures in control group, but showed mostly adhesive failure in experimental groups. As a summary of above results, if the primed tooth surface was contaminated with artificial saliva, primer should be reapplied after re-etching it.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.385-396
• /
• 2007

The aims of this study were to compare the shaping effect and safety between single length technique recommended by manufacturer and crown-down technique using Mtwo rotary file and to present a modified method in use of Mtwo file. Sixty simulated root canal resin blocks were used. The canals were divided into three groups according to instrument and the manner of using methods. Each group had 20 specimens. Group MT was instrumented with single length technique of Mtwo, group MC was instrumented with crown-down technique of Mtwo and group PT was instrumented with crown-down technique of ProTaper. All of the rotary files used in this study were operated by an electric motor. The scanned canal images of before and after preparation were superimposed. These superimposed images were evaluated at apical 1 to 8 mm levels Angle changes were calculated. The preparation time, weight loss, instrument failure and binding, canal aberrations, and centering ratio were measured. Statistical analysis of the three experimental groups was performed with ANOVA and Duncan's multiple range tests for post-hoc comparison and Fisher's exact test was done for the frequency comparison. In total preparation time, group MT and group MC were less than group PT. In the aberrations, group MT had more elbows than those of group MC and group PT. The binding of group MC was least and group MT was less than group PT (P < 0.05). Under the condition of this study, crown-down technique using Mtwo rotary file is better and safer method than single length technique recommended by the manufacturer.

• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.549-556
• /
• 2017

This study compared the spatial scattered dose distribution according to whether the recently developed radiation shielding is used or not in order to understand the spatial scattered dose distribution of C-arm. The horizontal side distribution increased by $30^{\circ}$ in the interval of the radius 50 cm on the height of 95 cm based on the head of the patient, and it was measured by increasing $30^{\circ}$ with the interval of 50 cm in the vertical side of each horizontal side. In the same method, the radiation shielding was installed and measured. The result of measurement shows that the horizontal side of 50 cm distance was $0^{\circ}$, $90^{\circ}$ and $180^{\circ}$, was $1.77{\pm}0.12$, $1.90{\pm}0.13$, $2.12{\pm}0.14$, and $2.69{\pm}0.15mSv/h$ in the $270^{\circ}$ direction, and was $1.59{\pm}0.12$, $0.99{\pm}0.09$, $1.47{\pm}0.11$, and $1.37{\pm}0.11mSv/h$ after the use of the radiation shielding. In addition, the vertical distribution in horizontal direction $90^{\circ}$ with 50 cm distance was $30^{\circ}$, $60^{\circ}$, $120^{\circ}$, was $3.85{\pm}0.18$, $9.15{\pm}0.28$, $10.82{\pm}0.31$, and $5.40{\pm}0.22mSv/h$ in $150^{\circ}$, and was $2.03{\pm}0.13$, $4.32{\pm}0.19$, $2.76{\pm}0.16$, and $1.92{\pm}0.13mSv/h\;mR/h$ after the use of the radiation shielding. Both direction showed decrease according to the use of the radiation shielding. Therefore, radiation related workers who work in operating rooms should recognize the spatial scattered dose distribution exactly and need to try to prevent the risk of radiation exposure with proper protective measures.

• Korean Security Journal
• /
• no.43
• /
• pp.205-230
• /
• 2015

This study aims to compare the differences of crucial factors that are associated with probation warning tickets between sex offenders and non-sex offenders in South Korea. Serious high-profile cases have occurred in recent years which resulted in public and political conners for successful sex offender management and monitoring strategy through community corrections. The official response has been to initiate a series of legislative probation and parole measures by using GPS electronic monitoring system, chemical castration, and sex offender registry and notification. In this context, the current study is designed to explore the major factors that could affect the failure of probation by comparing the differences between sex offenders and non-sex offenders in terms of their major factors which are related to the failure of probation. The failure of probation is measured by the number of warning tickets which would be issued when there is the violation of probation conditions. The data is obtained from Seoul Probation office from January, 29, 2014 to February, 28, 2014. The sample number of sex offenders is 144 and the number of non-sex offenders is 1,460. The data includes the information regarding the offenders who completed their probation order after they were assigned to Seoul Probation in 2013. Furthermore, this study uses the chi-square and logistic regression analysis by using SPSS statistical package program. The result demonstrated that only prior criminal history was statistically significant factor that was related to the number of warning tickets in the sex offender group when other variables were controlled($X^2=25.15$, p<0.05, Nagelkerke $R^2=0.23$)(b=0.19, SE=0.08, p<0.05). By contrast, there were various factors that were associated with the number of warning tickets in non-sex offender group. Specifically, the logistic regression analysis for the non-sex offenders showed that demographic variable(marital status and employment type), offender-victim relationships, alcohol addiction, violent behavior, prior criminal history, community service order, and attendance order were statistically significant factors that were associated with the odds of warning tickets. Further policy implication will be discussed.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.417-428
• /
• 2011

Depending on the plastic deformation capacity required, structural steel design under the current codes can be classified into three categories: elastic, plastic, and seismic design. Most of the current steel codes explicitly forbid the use of a steel material with a yield strength higher than 450 MPa in the plastic design because of the concerns about its low plastic deformation capacity as well as the lack of test data on local and lateral torsional buckling behavior. In this study, flexural tests on full-scale H-shape members built with SM490A (ordinary steel or benchmark material) and HSB800 (high-strength steel) were carried out. The primary objective was to investigate the appropriateness of extrapolating the local buckling criterion of the current codes, which was originally developed for normal-strength steel, to the case of high-strength steel. All the SM490A specimens performed consistently with the current code criteria and exhibited sufficient strength and ductility. The performance of the HSB800 specimens was also very satisfactory from the strength perspective; even the specimens with a noncompact and slender flange developed the plastic moment capacity. The HSB800 specimens, however, showed an inferior plastic rotation capacity due to the premature tensile fracture of the beam bottom flange beneath the vertical stiffener at the loading point. The plastic rotation capacity that was achieved was less than 3 (or the minimum level required for a plastic design). Although the test results in this study indicate that the extrapolation of the current flange local-buckling criterion to the case of high-strength steel is conservative from the elastic design perspective, further testing together with an associated analytical study is required to identify the causes of the tensile fracture and to establish a flange slenderness criterion that is more appropriate for high-strength steel.

• Research in Plant Disease
• /
• v.21 no.2
• /
• pp.58-66
• /
• 2015

This study was conducted to evaluate control efficacy of a fermented food 'Cheonggukjang' against cucumber powdery mildew caused by Sphaerotheca fuliginea in greenhouse. Sterilized Daepung beans were inoculated with the rice straw as natural inoculum and then incubated for 72 hrs at $42^{\circ}C$ in the household cheonggkjang maker. After 72 hrs of cheonggukjang fermentation, white zymogens were grown on the surface of a sterile Daepung beans. The pH of the 72 hrs fermented soybean was not significantly changed and electrical conductivity was found to increase by about 2 times than before fermentation. The population density of soybean zymogen showed a peak of growth at 60 hrs after fermentation and the concentration of zymogen was $8.2{\times}10^7cfu/ml$. Soybean zymogen form of the colony was divided into three kinds of bacteria and a white and a large colony (WL) was predominant bacteria among those up to 60 hrs of fermentation. To control the cucumber powdery mildew, diluted solutions of cheonggukjang was applied from 6.0% to 30.0% on cucumber leaves and they showed injury symptoms on cucumber leaves in more than 15% of them. However, more than 6.0% diluted cheonggukjang solutions showed more than 77.8% control effect of cucumber powdery mildew at 15 days after treatment. The fermented bacteria of Chenggukjang were well established in the cucumber leaf area at 15 days after treatment. The antifungal activity of 10% diluted cheonggukjang solutions was excellent for four species of plant fungal pathogens, Colletotrichum gloeosporioides, Sclerotinia cepivorum, Rhizoctonia sloani and Phytophthora capsici in the dual culture test. Results indicated that foliar application of Cheonggukjang solution could be used for the control of powdery mildews occurring on organically cultivated cucumber.

• Korean Journal of Poultry Science
• /
• v.43 no.2
• /
• pp.111-118
• /
• 2016

Mycotoxins are secondary metabolites produced by molds, such as Aspergillus, Fusarium and Penicillium, that have adverse effects on animals and humans. Aflatoxin, ochratoxin, zearalenone, fumonisin and deoxynivalenol are the mycotoxins of greatest agro-economic importance and cause acute disease called mycotoxicoses. Mycotoxicosis in poultry birds results in decreased meat/egg production, immunosuppressant, and hepatotoxicosis. Some of toxins or their metabolites may be retained in animal or human tissues and induce health problems. This study was designed to develop a sensitive liquid chromatography tandem mass spectrometry (LC-MS/MS) method for the simultaneous detection and quantification of mycotoxins, such as aflatoxin $B_1$, aflatoxin $M_1$, ochratoxin A, zearalenone, fumonisin B and deoxynivalenol, in chicken liver and kidney tissues. The mycotoxins were extracted and purified using modified QUECHERS methods, separated by LC and detected by an electrospray ionisation interface (ESI) and tandem MS. Good precision and linearity were observed for most of six mycotoxins. The recovery test for each mycotoxin in liver and kidney tissues mostly indicated good average recovery rates between 80.94% and 98.10% and the coefficient of variation mostly under 13.78%, except for aflatoxin $M_1$ and fumonisin $B_1$. The limit of detection (LOD) for six mycotoxins was $7.6{\sim}145.79{\mu}g/kg$ in liver tissues and $6.07{\sim}197.20{\mu}g/kg$ in kidney tissues. The quantification limits (LOQ) for 6 mycotoxins were in the range $23.04{\sim}441.78{\mu}g/kg$ in liver tissues and $18.40{\sim}597.59{\mu}g/kg$ in kidney tissues, respectively. The developed multi-mycotoxin method in this study permits simultaneous, simple, and rapid determination of several co-existing mycotoxins in chicken liver and kidney tissues.

• Journal of Chest Surgery
• /
• v.34 no.4
• /
• pp.329-337
• /
• 2001

배경: 승포판 전엽이나 교련 또는 여러 판엽에 걸쳐 광범위한 병변으로 인한 승모판 역류의 경우 수술수기에 대한 뚜렷한 정립이 되어 있지 않은 실정이다. 최근 이러한 병변의 승모판 역류의 경우 PTEE(Polytetrafluro-ethylene)을 이용한 신건삭 형성술의 시행이 점차 늘고 있다. 이에 저자들은 PTEE를 이용한 신건삭 형성술이 승모판 성형술에 어떠한 영향을 미치는지 알아보고자 하였다. 대상 및 방법: 1994년 1월부터 1999년 12월까지 승모판막 성형술을 시행 받은 322명의 환자 중에서 신건삭 형성술을 이용하여 승모판 성형술을 시행한 144례(I군)과 신건삭 형성술 이외의 방법으로 승모판 성형술을 시행한 178례(II군)를 대상으로 하였다. 두 군에서 수술 직후ㅘ 수술 후 6개월, 1년 및 1년 단위로 주기적인 심초음파를 시행하였고 이를 통계적 검정하였다. 결과: 같은 기간 승모판 성형술은 승모판막 폐쇄 부전증으로 내원한 환자의 95%(306)에서 추적 관찰이 가능하였다. 두 구난에 수술 전 혈류 역학적인 차이를 보이지 않았고, 수술 전 평균 승모판막 폐쇄 부전의 정도는 I군이 3.8$\pm$0.4, II군이 3.6$\pm$0.3였으나 수술 후 추적 관찰에서 각각 1.3$\pm$0.9와 1.1$\pm$0.7 정도의 양호한 판막 성형술의 결과를 보였고 승모판막 면적의변화나 승모판막에서의 평균 압력차이 등 혈류 역학적인 결과에도 차이를 보이고 있지 않았다. 술 후 3명(0.9%)의 조기 사망과 4명 (1.2%)의 후기 사망이 있었으나 두 군간의 차이는 보이지 않았다. 만기 생존율( 93.7$\pm$3.3 vs 88.0$\pm$1.95) 및 판막살패가 발생하기 않을 확률( 93.7$\pm$3.6 vs 93.3$\pm$3.4%) 과 재수술이 필요치 않을 활률(99.3$\pm$0.7 vs 96.0$\pm$1.9%), 색전증, 감염성 심내막염, 판막과 관련된 합병증 발생률 등에서 두 군간에 의미 있는 차이는 없었다. 전엽과 후엽에서 신건삭 형성술을 시행한 환자에서는 통계학적인 차이가 없었다(p=0.29) 결론: 신건삭 형성술을 이용한 승모판 성형술은 승모판 성형술의 증가(r=0.98, p<0.01)를 가져 왔을 뿐만 아니라 내구성과 안정성에 있어 기존의 안전화된 수술 수기와 견줄만하다. 특히 이러한 신건삭 형성술은 승모판 전엽에 병변이 있는 경우와 교련부 및 여러 엽에 광범위한 병변으로 인하여 재건술이 어려운 경우에도 승모판 재건을 가능하게 하는 우수한 수술 수리가 사료된다.

• Journal of Chest Surgery
• /
• v.29 no.12
• /
• pp.1323-1328
• /
• 1996

The obstructive diseases involving the left main coronary artery(LMCA) are serious. Surgical treatment is generally regarded as much more effective than medical therapy in terms of long-term survival and relief of symptoms. This study represents an attempt to present an analysis of early surgical results in 21 cases conducted at Chonnam University Hospital between October 1992 And August 1995. The subject. 12 males and 9 female, ranged in age from 25 to 67 years with a mean age of 49.3${\pm}$12.5 years. As for indications for operation, unstable angina was reported on 66.7% of the subjects, while stable angina and acute myocardial infarction in 4 and 3 cases, respectively. There were also 2 cases of Takayasu's aortitis and 1 case of failed percutaneous translumlnal coronary angioplasty(PTCA). Eleven subjects had isolated LMCA diseases compared to 10 subjects with associated LMCA diseases. Of the patients with ass;3ciated LMCA diseases, 4 subjects had single coronary artery disease, 3 had double coronary artery disease, remaining 3 suffered from triple coronary artery disease. As for the group with isolated LMCA disease, ostidl angioplasty llsing autopericardium was conducted with 5 subjects. The remaining subjects with the isolated diseases and all of the patients with associated LMCA disease underwent aortocoronary bypass grafts. The left internal mammary artery was used in all patients and the average number of anastomoses was 3.13 ${\pm}$0.93. One subject died of low cardiac output syndrome at the second postoperative day. There were 5 instances of postoperative complication including reoperation for bleeding in two patients, wound infection in two, and arrhythmia in one. Follow-up coronary angiogram were conducted with eights patients, including five patients who underwent ostial angioplasty. In these cases, the patients showed surf. ficient enlargement of the left coronary ostium and the grafted vessels kept their patency. In our experience, surgical treatment of the LMCA diseases has not shown a higher rAte of operative mortAlity or morbidity than other obstructive coronary artery diseases. To patients with ostial stenosis, which is frequently observed among young female, angioplasly utilizing autopericardium seems to be a desirable choice considering the cosmetic effect, chances of reoperation and hemodynamic characteristics.

• Journal of Chest Surgery
• /
• v.42 no.6
• /
• pp.725-731
• /
• 2009

Background: Lobectomy and more extended anatomic resection are regarded as standard treatment for stage Ia non-small cell lung cancer, but approximately 15~40% of patients suffer from treatment failures such as cancer recurrence or death. The authors analyzed types and causes of treatment failures in surgically treated cases of stage Ia non small cell lung cancer. Material and Method: We retrospectively reviewed the medical records of 156 patients who had undergone complete resection for stage Ia NSCLC between Jan 1992 and Aug 2005. Patients were divided into two different treatment failure groups: cancer-related deaths and non-cancer-related deaths. Risk factors were analyzed in each group by the Kaplan-Meyer survival method and the Cox proportional hazard model. Result: Among the 156 patients, 93 were males; the mean age was 61. The median follow-up period was 33.8 months. The 5 year survival rate was 87.6%. Microscopic lympho-vascular permeation was reported in 10 patients. Recurrence was reported in 19 patients and 12 patients died due to recurrent lung cancer. Noncancer related deaths occurred in 16 patients. Risk factors for cancer recurrence and cancer related death were microscopic lympho-vascular permeation (HR=6.81, p=0.007, HR=7.81, p<0.001); for non-cancer related death, risk factors were pneumonectomy (HR=25.92, p=0.001) and postoperative cardiopulmonary complications (HR=29.67, p=0.002). Conclusion: After complete resection of stage Ia non small cell lung cancer patients, mortality includes not only cancer related deaths but also cancer unrelated deaths. Adjuvant chemotherapy is advised for patients who show microscopic lympho-vascular permeation, which is a risk factor for recurrence and for cancer related death. Patients who had pneumonectomy or who suffered from cardiac or respiratory complications need meticulous care in order to reduce comorbidity-induced death.