• 한국식품과학회지
• /
• 제26권3호
• /
• pp.300-304
• /
• 1994

고추장의 유통기간 중 품질변화를 예측하기 위하여 숙성 완료된 고추장을 $13^{\circ}C$, $27^{\circ}C$ and $37^{\circ}C$ 에 저장하면서 품질의 변화를 측정하였다. 수분, 조단백질, 캡사이신함량은 저장 중 거의 변화하지 않았으나, 아미노태질소, 표면색도, pH는 감소하는 경향을 나타내었으며 암모니아태질소, 산도는 증가하였다. 이러한 증감현상은 저장온도가 높을수록 더욱 뚜렷하여 저장 온도가 고추장의 품질변화에 밀접한 관련이 있음을 알 수 있었다. 총균수는 저장온도 및 기간의 증가에 따라 큰 변화는 보이지 않았으며, 진균류는 검출되지 않았다. 이화학적 품질 특성과 관능검사와의 상관관계를 구한 결과 아미노태질소의 변화가 가장 높은 상관관계를 보였다. 저장기간에 따른 아미노태 질소값의 변화율은 1차 반응식으로 해석되었음, 반응상수로부터 계산된 $Q_{10}$값은 2.98이었다. 또한, Arrhenius equation을 이용하여 활성화에너지를 구한 결과 15.84 Kcal/mole인 것으로 나타났다.

• 한국해양학회지:바다
• /
• 제11권2호
• /
• pp.82-91
• /
• 2006

본 연구에서는 도시하수처리장 방류수를 하천연구용 추적자로 이용할 수 있는지 여부를 검토하였다. 이 같은 연구는 전주하수처리장 처리수 방류지점 하류 12 km구간에 대해서 수행 되었다. 연속 수질조사 결과 당 하수처리장 방류수의 수질은 조사기간 동안 비교적 넓은 범위에서 변화되고 있음이 관찰되었다. 특히 염소이온농도, 황산이온농도, 총양이온 농도, 전기전도도 등과 같은 변수들은 하수처리장 방류수에서의 수질변화 양상이 방류지점 하류의 관측지점들에서도 시간차이를 두고 순차적으로 관찰되었으며, 이러한 관측결과를 바탕으로 하천의 유속(v), 유량(Q), 수리분산계수(D) 값을 유추해 낼 수 있었다. 본 연구를 위해서는 1차원 비반응성 이산-분산 모델을 자동최적화 기법으로 역산하는 방법이 이용되었다. 이 같은 방법을 통하여 추산된 최하류 지점의 유량은 조사기간동안 6.4에서 $9.0m^3/sec$ 까지 변화되는 것으로 나타났으며, 유속은 조사구간내에서 0.06에서 0.10 m/sec까지, 수리분산계수는 0.7에서 $6.4m^2/sec$까지 변화되는 것으로 나타났다. 본 연구결과는 대도시의 대규모하수처리장이 수문연구에 적합한 추적자들을 제공해줄 수 있다는 점을 보여 주는 것이다.

• 통합자연과학논문집
• /
• 제10권2호
• /
• pp.78-84
• /
• 2017

CXC chemokine receptor 2 (CXCR2) is a prominent chemokine receptor on neutrophils. CXCR2 antagonist may reduce the neutrophil chemotaxis and alter the inflammatory response because the neutrophilic inflammation in the lung diseases is found to be largely regulated through CXCR2 receptor. Hence, in the present study, Hologram based Quantitative Structure Activity Relationship Study was performed on a series of CXCR2 antagonist named pyrimidine-5-carbonitrile-6-alkyl derivatives. The best HQSAR model was obtained using atoms, bonds, and chirality as fragment distinction parameter using hologram length 151 and 6 components with fragment size of minimum 4 and maximum 7. Significant cross-validated correlation coefficient ($q^2=0.774$) and non cross-validated correlation coefficients ($r^2=0.977$) were obtained. The model was then used to evaluate the six external test compounds and its $r^2_{pred}$ was found to be 0.614. Contribution map show that presence of cyclopropyl ring and its bulkier substituent's makes big contributions for improving the biological activities of the compounds. We hope that our HQSAR model and analysis will be helpful for future design of novel and structurally related CXCR2 antagonists.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.127-130
• /
• 2002

In this study, development of a new LTCC material using a non-glassy system was attempted with respect to reducing the fabrication process steps and cost down. Lowering the sintering temperature can be achieved by liquid phase sintering. For LTCC application, the starting material must have quality factor as high as possible in microwave frequency range. And also, the material should have a low dielectric constant for enhancing the signal propagation speed. Regarding these factors, dielectric constants of various materials were estimated by the Clausius-Mosotti equation. Among them, CaWO$_4$ was tamed out the suitable LTCC material. CaWO$_4$ can be sintered up to 98% of full density at 1200$^{\circ}C$ for 3 hours. It's measured dielectric constant, quality factor, and temperature coefficient of resonant frequency were 10.15, 62880GHz, and -27.8ppm/$^{\circ}C$, respectively. In order to modify the dielectric properties and densification temperature, 0.5∼1.5 wt% LiF were added to CaWO$_4$. LiF addition reduced the sintering temperature/time down to 800$^{\circ}C$/10∼30min due to the reactive liquid phase sintering. Dielectric constant lowered from 10.15 to 9.38 and Q x fo increased up to 92000GHz with increasing LiF content.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.33.2-33.2
• /
• 2009

Dielectric and piezoelectric properties of Lead-free $(1-x)(Bi_{0.5}K_{0.5})TiO_3-xBiFeO_3$ceramics prepared by a conventional solid state reaction method were investigated in the range of x = 0~10 mol%. Piezoelectric coefficient was increased from 31 pC/N at x = 0 mol% to 64 pC/N at x = 6 mol% then decreased with increasing x. Electromechanical coupling factor ($K_p$) was increased up to 0.18 at x = 10 mol%. On the other hand, mechanical quality factor ($Q_m$) was decreased. Grain size was not much changed with various x and a single perovskite with tetragonal symmetry was maintained at all compositions forming a solid solution between $(Bi_{0.5}K_{0.5})TiO_3$ and $BiFeO_3$. Depolarization temperature ($T_d$) was gradually decreased with increasing x from $302^{\circ}C$ at x = 0 to $245^{\circ}C$ at x = 10 mol%.

• Wind and Structures
• /
• 제13권1호
• /
• pp.57-82
• /
• 2010

The 486m-long roof of Shenzhen Citizens Centre is one of the world's longest spatial lattice roof structures. A comprehensive numerical study of wind effects on the long-span structure is presented in this paper. The discretizing and synthesizing of random flow generation technique (DSRFG) recently proposed by two of the authors (Huang and Li 2008) was adopted to produce a spatially correlated turbulent inflow field for the simulation study. The distributions and characteristics of wind loads on the roof were numerically evaluated by Computational Fluid Dynamics (CFD) methods, in which Large Eddy Simulation (LES) and Reynolds Averaged Navier-Stokes Equations (RANS) Model were employed. The main objective of this study is to explore a useful approach for estimations of wind effects on complex curved roof by CFD techniques. In parallel with the numerical investigation, simultaneous pressure measurements on the entire roof were made in a boundary layer wind tunnel to determine mean, fluctuating and peak pressure coefficient distributions, and spectra, spatial correlation coefficients and probability characteristics of pressure fluctuations. Numerical results were then compared with these experimentally determined data for validating the numerical methods. The comparative study demonstrated that the LES integrated with the DSRFG technique could provide satisfactory prediction of wind effects on the long-span roof with complex shape, especially on separation zones along leading eaves where the worst negative wind-induced pressures commonly occur. The recommended LES and inflow turbulence generation technique as well as associated numerical treatments are useful for structural engineers to assess wind effects on a long-span roof at its design stage.

• Bulletin of the Korean Chemical Society
• /
• 제26권12호
• /
• pp.2007-2016
• /
• 2005

An artificial neural network (ANN) is successfully presented for prediction acidity constant (pKa) of various benzoic acids and phenols with diverse chemical structures using a nonlinear quantitative structure-property relationship. A three-layered feed forward ANN with back-propagation of error was generated using six molecular descriptors appearing in the multi-parameter linear regression (MLR) model. The polarizability term $(\pi_1)$, most positive charge of acidic hydrogen atom $(q^+)$, molecular weight (MW), most negative charge of the acidic oxygen atom $(q^-)$, the hydrogen-bond accepting ability $(\epsilon_B)$ and partial charge weighted topological electronic (PCWTE) descriptors are inputs and its output is pKa. It was found that properly selected and trained neural network with 205 compounds could fairly represent dependence of the acidity constant on molecular descriptors. For evaluation of the predictive power of the generated ANN, an optimized network was applied for prediction pKa values of 37 compounds in the prediction set, which were not used in the optimization procedure. Squared correlation coefficient $(R^2)$ and root mean square error (RMSE) of 0.9147 and 0.9388 for prediction set by the MLR model should be compared with the values of 0.9939 and 0.2575 by the ANN model. These improvements are due to the fact that acidity constant of benzoic acids and phenols in water shows nonlinear correlations with the molecular descriptors.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.346-349
• /
• 2003

Microwave dielectric characteristics and physical properties of the new Zr$_{1-x}$ (Bn$_{1}$3/Nb$_{2/3}$)xTi $O_4$ (0.2$\leq$x$\geq$ 1.0) system have been investigated as a function of the amount of Bn$_{1}$3/Nb$_{2/3}$ $O_2$substitution. With increasing Bn$_{1}$3/Nb$_{2/3}$ $O_2$ content (x), two phase regions were observed: $\alpha$-Pb $O_2$ solid solution (x<0.4), mixture of the rutile type Zn$_{1}$3/Nb$_{2/3}$Ti $O_4$ and the $\alpha$-Pb $O_2$ solid solution (x$\geq$0.4). In the$\alpha$-Pb $O_2$solid solution region below x<0.4, the Q.f$_{0}$ value sharply increased and the Temperature Coefficient of the Resonant Frequency(TCF) decreased with increasing Bn$_{1}$3/Nb$_{2/3}$ $O_2$ contents while dielectric constant (K) showed nearly same value. In the mixture region above x$\geq$4, the dielectric constant and TCF increased with increasing Bn$_{1}$3/Nb$_{2/3}$ $O_2$ content. Zr$_{1-x}$ (Zn$_{1}$3/Nb$_{2/3}$)xTi $O_4$ materials have excellent microwave dielectric properties with K=44.0, Q.f$_{0}$ : 41000 GHz and TCF =-3.0 ppm/$^{\circ}C$ at x=0.35.=0.35. x=0.35.=0.35.

• 한국전자파학회논문지
• /
• 제21권6호
• /
• pp.627-634
• /
• 2010

본 논문에서는 complimentary bifilar archimedean spiral resonator(CBASR)를 이용하여 저위상 잡음 특성을 갖는 새로운 구조의 전압 제어 발진기를 제안하였다. CBASR은 작은 면적, 저지대역에서 날카로운 스커트 특성과 통과대역에서 낮은 삽입 손실, 큰 결합 계수 값을 나타내며, 이로 인해 높은 Q값을 구현할 수 있는 장점이 있다. 따라서, 본 논문에서는 CBASR을 공진 회로로 사용하여 전압 제어 발진기의 위상 잡음을 개선시켰다. 제안된 전압 제어 발진기의 주파수 조절 범위는 제어 전압 0~5 V에서 2.396~2.502 GHz이며, 출력은 7.5 dBm, 그리고 위상 잡음 특성은 100 kHz offset에서 -119.16~-120.2 dBc/Hz이다.

• 한국전기전자재료학회논문지
• /
• 제27권9호
• /
• pp.555-560
• /
• 2014

In this paper, in order to develop outstanding Pb-free composition ceramics, the $Fe_2O_3$-doped ($Na_{0.525}K_{0.443}Li_{0.037}$)($Nb_{0.883}Sb_{0.08}Ta_{0.037}$)$O_3$ + 0.3 wt% $Bi_2O_3$ + x wt% $Fe_2O_3$ (x= 0~1.0 wt%)(abbreviated as NKL-NST) lead-free piezoelectric ceramics have been synthesized using the ordinary solid state reaction method. The effect of $Fe_2O_3$-doping on their microstructure and electrical properties were investigated. XRD diffraction pattern studies confirm that $Fe_2O_3$ completely diffused into the NKL-NST lattice to form a new stable soild solution with $Fe^{3+}$ entering the $Nb^{5+}$, $Sb^{5+}$ and $Ta^{5+}$ of B-site. And, phase structure of all the ceramics exhibited pure perovskite phase and no secondary phase was found in the ceramics. The ceramics doped with 0.6 wt% $Fe_2O_3$ have the optimum values of piezoelectric constant($d_{33}$), planar piezoelectric coupling coefficient($k_p$) and mechanical quality factor($Q_m$) : $d_{33}$ = 233 [pC/N], $k_p$= 0.44, $Q_m$= 95. These results indicate that the ($Na_{0.525}K_{0.443}Li_{0.037}$)($Nb_{0.883}Sb_{0.08}Ta_{0.037}$)$O_3$ +0.3 wt% $Bi_2O_3$ + 0.6 wt% $Fe_2O_3$ ceramic is a promising candidate for lead-free piezoelectric ceramics.