• 제목/요약/키워드: $Q_{10}$ coefficient

검색결과 378건 처리시간 0.028초

Investigation of Cadmium and Zinc Interactions in Soils using Desorption Isotherms

  • Lee, Jin-Ho;Doolittle, James J.
    • 한국환경농학회지
    • /
    • 제25권2호
    • /
    • pp.157-163
    • /
    • 2006
  • Investigation of Cd and Zn availability in four different soils as affected by the interactions of these two heavy metals was conducted using the metal desorption quantity-intensity (Q/I) isotherms. The soils were artificially contaminated with proper concentrations of Cd and Zn as $CdSO_4\;and\;ZnSO_4$ solutions. DTPA (diethylene triamine pentaacetic acid) - extractable and water-extiactable Cd or Zn from the soils were used as $Q_{Cd}\;or\;Q_{Zn}\;and\;I_{Cd}\;or\;I_{Zn}$ factors, respectively. The coefficient of determination for Cd and Zn desorption Q/I linear regression in the soils ranged from 0.947 to 0.999, which indicated that Q and I factors were closely correlated. The buffering capacity of Cd, $BC_{Cd}$, in the soils decreased with increasing Zn treatments, and the $BC_{Cd}$ values were ranged between 205.8 and 2255.6. The decreases of $BC_{Cd}$ values were mainly dependent upon the increases of $I_{Cd}$ factors. However, Zn buffering capacity. $BC_{Zn}$ decreased with increasing Cd treatments in acidic soils, and increased in neutral and calcareous alkaline soils. The $BC_{Cd}$ values were ranged from 143.2 to 6158.0. The values of $BC_{Zn}$ as influenced by the treatments of Cd were also controlled by the solubility of water-extractable Zn, $I_{Zn}$ factor. The solubility of water-extractable Cd and Zn was significantly dependent upon the changes of soil pH that were impacted by the treatment of Zn and Cd, respectively. Also, the availability of Cd was higher than Zn availability in the acidic and neutral soils, but Zn was higher than Cd in the calcareous alkaline soil.

A NOTE ON LINEAR IMPULSIVE FRACTIONAL DIFFERENTIAL EQUATIONS

  • Choi, Sung Kyu;Koo, Namjip
    • 충청수학회지
    • /
    • 제28권4호
    • /
    • pp.583-590
    • /
    • 2015
  • This paper deals with linear impulsive fractional differential equations involving the Caputo derivative with non-integer order q. We provide exact solutions of linear impulsive fractional differential equations with constant coefficient by mean of the Mittag-Leffler functions. Then we apply the exact solutions to improve impulsive integral inequalities with singularity.

On a Reverse of the Slightly Sharper Hilbert-type Inequality

  • Zhong, Jianhua
    • Kyungpook Mathematical Journal
    • /
    • 제49권4호
    • /
    • pp.731-742
    • /
    • 2009
  • In this paper, by introducing parameters ${\lambda}$, ${\alpha}$and two pairs of conjugate exponents (p, q), (r, s) and applying the improved Euler-Maclaurin's summation formula, we establish a reverse of the slightly sharper Hilbert-type inequality. As applications, the strengthened version and the equivalent form are given.

유역특성에 의한 합성단위도의 유도에 관한 연구 (Derivation of the Synthetic Unit Hydrograph Based on the Watershed Characteristics)

  • 서승덕
    • 한국농공학회지
    • /
    • 제17권1호
    • /
    • pp.3642-3654
    • /
    • 1975
  • The purpose of this thesis is to derive a unit hydrograph which may be applied to the ungaged watershed area from the relations between directly measurable unitgraph properties such as peak discharge(qp), time to peak discharge (Tp), and lag time (Lg) and watershed characteristics such as river length(L) from the given station to the upstream limits of the watershed area in km, river length from station to centroid of gravity of the watershed area in km (Lca), and main stream slope in meter per km (S). Other procedure based on routing a time-area diagram through catchment storage named Instantaneous Unit Hydrograph(IUH). Dimensionless unitgraph also analysed in brief. The basic data (1969 to 1973) used in these studies are 9 recording level gages and rating curves, 41 rain gages and pluviographs, and 40 observed unitgraphs through the 9 sub watersheds in Nak Oong River basin. The results summarized in these studies are as follows; 1. Time in hour from start of rise to peak rate (Tp) generally occured at the position of 0.3Tb (time base of hydrograph) with some indication of higher values for larger watershed. The base flow is comparelatively higher than the other small watershed area. 2. Te losses from rainfall were divided into initial loss and continuing loss. Initial loss may be defined as that portion of storm rainfall which is intercepted by vegetation, held in deppression storage or infiltrated at a high rate early in the storm and continuing loss is defined as the loss which continues at a constant rate throughout the duration of the storm after the initial loss has been satisfied. Tis continuing loss approximates the nearly constant rate of infiltration (${\Phi}$-index method). The loss rate from this analysis was estimated 50 Per cent to the rainfall excess approximately during the surface runoff occured. 3. Stream slope seems approximate, as is usual, to consider the mainstreamonly, not giving any specific consideration to tributary. It is desirable to develop a single measure of slope that is representative of the who1e stream. The mean slope of channel increment in 1 meter per 200 meters and 1 meter per 1400 meters were defined at Gazang and Jindong respectively. It is considered that the slopes are low slightly in the light of other river studies. Flood concentration rate might slightly be low in the Nak Dong river basin. 4. It found that the watershed lag (Lg, hrs) could be expressed by Lg=0.253 (L.Lca)0.4171 The product L.Lca is a measure of the size and shape of the watershed. For the logarithms, the correlation coefficient for Lg was 0.97 which defined that Lg is closely related with the watershed characteristics, L and Lca. 5. Expression for basin might be expected to take form containing theslope as {{{{ { L}_{g }=0.545 {( { L. { L}_{ca } } over { SQRT {s} } ) }^{0.346 } }}}} For the logarithms, the correlation coefficient for Lg was 0.97 which defined that Lg is closely related with the basin characteristics too. It should be needed to take care of analysis which relating to the mean slopes 6. Peak discharge per unit area of unitgraph for standard duration tr, ㎥/sec/$\textrm{km}^2$, was given by qp=10-0.52-0.0184Lg with a indication of lower values for watershed contrary to the higher lag time. For the logarithms, the correlation coefficient qp was 0.998 which defined high sign ificance. The peak discharge of the unitgraph for an area could therefore be expected to take the from Qp=qp. A(㎥/sec). 7. Using the unitgraph parameter Lg, the base length of the unitgraph, in days, was adopted as {{{{ {T}_{b } =0.73+2.073( { { L}_{g } } over {24 } )}}}} with high significant correlation coefficient, 0.92. The constant of the above equation are fixed by the procedure used to separate base flow from direct runoff. 8. The width W75 of the unitgraph at discharge equal to 75 per cent of the peak discharge, in hours and the width W50 at discharge equal to 50 Per cent of the peak discharge in hours, can be estimated from {{{{ { W}_{75 }= { 1.61} over { { q}_{b } ^{1.05 } } }}}} and {{{{ { W}_{50 }= { 2.5} over { { q}_{b } ^{1.05 } } }}}} respectively. This provides supplementary guide for sketching the unitgraph. 9. Above equations define the three factors necessary to construct the unitgraph for duration tr. For the duration tR, the lag is LgR=Lg+0.2(tR-tr) and this modified lag, LgRis used in qp and Tb It the tr happens to be equal to or close to tR, further assume qpR=qp. 10. Triangular hydrograph is a dimensionless unitgraph prepared from the 40 unitgraphs. The equation is shown as {{{{ { q}_{p } = { K.A.Q} over { { T}_{p } } }}}} or {{{{ { q}_{p } = { 0.21A.Q} over { { T}_{p } } }}}} The constant 0.21 is defined to Nak Dong River basin. 11. The base length of the time-area diagram for the IUH routing is {{{{C=0.9 {( { L. { L}_{ca } } over { SQRT { s} } ) }^{1/3 } }}}}. Correlation coefficient for C was 0.983 which defined a high significance. The base length of the T-AD was set to equal the time from the midpoint of rain fall excess to the point of contraflexure. The constant K, derived in this studies is K=8.32+0.0213 {{{{ { L} over { SQRT { s} } }}}} with correlation coefficient, 0.964. 12. In the light of the results analysed in these studies, average errors in the peak discharge of the Synthetic unitgraph, Triangular unitgraph, and IUH were estimated as 2.2, 7.7 and 6.4 per cent respectively to the peak of observed average unitgraph. Each ordinate of the Synthetic unitgraph was approached closely to the observed one.

  • PDF

Millimeter-wave Dielectric Ceramics of Alumina and Forsterite with High Quality factor and Low Dielectric Constant

  • Ohasto, Hitoshi;Tsunooka, Tsutomu;Ando, Minato;Ohishi, Yoshihiro;Miyauchi, Yasuharu;Kakimoto, Ken ichi
    • 한국세라믹학회지
    • /
    • 제40권4호
    • /
    • pp.350-353
    • /
    • 2003
  • Millimeter-wave dielectric ceramics have been used like applications for ultrahigh speed wireless LAN because it reduces the resources of electromagnetic wave, and Intelligent Transport System (ITS) because of straight propagation wave. For millimeterwave, the dielectric ceramics with high quality factor (Q$.$f), low dielectric constant($\varepsilon$), and nearly zero temperature coefficient of resonant frequency ($\tau$) are needed. No microwave dielectric ceramics with these three properties exist except Ba(Mg$\_$1/3/Ta/sub1/3/)O$_3$ (BMT), which has a little high s: In this paper, alumina (Al$_2$O$_3$) and fosterite (Mg$_2$SiO$_4$), candidates for millimeter-wave applications, were studied with an objective to get high q$.$f and nearly zero $\tau$$\_$f/ For alumina ceramics, q$.$f more than 680,000 GHz was obtained but it was difficult to obtain nearly zero Qf. On the other hand, for forsterite ceramics, q$.$f was achieved from 10,000 GHz of commercial for sterite to 240,000 GHz of highly purified MgO and SiO$_2$ raw materials, and $\tau$$\_$f/ was reduced a few by adding TiO$_2$ with high positive $\tau$$\_$f/.

A CoMFA Study of Quinazoline-based Anticancer Agents

  • Balupuri, Anand;Balasubramanian, Pavithra K.;Cho, Seung Joo
    • 통합자연과학논문집
    • /
    • 제8권3호
    • /
    • pp.214-220
    • /
    • 2015
  • Cancer has emerged as one of the leading cause of deaths worldwide. A three-dimensional quantitative structure-activity relationship (3D-QSAR) analysis was performed on a series of quinazoline-based anticancer agents. Purpose of the study is to understand the structural basis for their inhibitory activity. Comparative molecular field analysis (CoMFA) technique was employed to develop 3D-QSAR model. Ligand-based alignment scheme was used to generate a reliable CoMFA model. The model produced statistically significant results with a cross-validated correlation coefficient ($q^2$) of 0.589 and a non-cross-validated correlation coefficient ($r^2$) of 0.928. Model was further validated by bootstrapping and progressive scrambling analysis. This study could assist in the design of novel and more potent anticancer agents.

Holographic Quantitative Structure-Activity Relationship (HQSAR) Study of 3,4-Dihydroxychalcone Derivatives as 5-Lipoxygenase Inhibitors

  • Gadhe, Changdev G.
    • 통합자연과학논문집
    • /
    • 제4권3호
    • /
    • pp.210-215
    • /
    • 2011
  • Holographic quantitative structure-activity relationships (HQSAR) is a useful tool to correlates structures with their biological activities. HQSAR is a two dimensional (2D) QSAR methodology, which generates QSAR equations through 2D fingerprint and correlates it with biological activity. Here, we report a 2D-QSAR model for a series of fifty-one 3,4-dihydroxychalcones derivatives utilizing HQSAR methodology. We developed HQSAR model with 6 optimum numbers of components (ONC), which resulted in cross-validated correlation coefficient ($q^2$) of 0.855 with 0.283 standard error of estimate (SEE). The non-cross-validated correlation coefficient (r2) with 0.966 indicates the model is predictive enough for analysis. Developed HQSAR model was binned in to a hologram length of 257. Atomic contribution map revealed the importance of dihydroxy substitution on phenyl ring.

AT LEAST TWO SOLUTIONS FOR THE SEMILINEAR BIHARMONIC BOUNDARY VALUE PROBLEM

  • Jung, Tacksun;Choiy, Q-Heung
    • Korean Journal of Mathematics
    • /
    • 제22권4호
    • /
    • pp.633-644
    • /
    • 2014
  • We get one theorem that there exists a unique solution for the fourth order semilinear elliptic Dirichlet boundary value problem when the number 0 and the coefficient of the semilinear part belong to the same open interval made by two successive eigenvalues of the fourth order elliptic eigenvalue problem. We prove this result by the contraction mapping principle. We also get another theorem that there exist at least two solutions when there exist n eigenvalues of the fourth order elliptic eigenvalue problem between the coefficient of the semilinear part and the number 0. We prove this result by the critical point theory and the variation of linking method.

Development of a meshless finite mixture (MFM) method

  • Cheng, J.Q.;Lee, H.P.;Li, Hua
    • Structural Engineering and Mechanics
    • /
    • 제17권5호
    • /
    • pp.671-690
    • /
    • 2004
  • A meshless method with novel variation of point collocation by finite mixture approximation is developed in this paper, termed the meshless finite mixture (MFM) method. It is based on the finite mixture theorem and consists of two or more existing meshless techniques for exploitation of their respective merits for the numerical solution of partial differential boundary value (PDBV) problems. In this representation, the classical reproducing kernel particle and differential quadrature techniques are mixed in a point collocation framework. The least-square method is used to optimize the value of the weight coefficient to construct the final finite mixture approximation with higher accuracy and numerical stability. In order to validate the developed MFM method, several one- and two-dimensional PDBV problems are studied with different mixed boundary conditions. From the numerical results, it is observed that the optimized MFM weight coefficient can improve significantly the numerical stability and accuracy of the newly developed MFM method for the various PDBV problems.

이화학적인 방법에 의한 황색종 잎담배 품질의 계수 (Study of Leaf Quality Coefficient on Korea Flue-cured Tobacco Leaves According to Chemical Variables.)

  • 김신일;김찬호
    • 한국연초학회지
    • /
    • 제6권1호
    • /
    • pp.63-72
    • /
    • 1984
  • 1 . Some components associated with mildness, taste, and aroma were set. It was supposed that the three factors contribute to equally the evaluation of tobacco quality. Following equation of quality index was provide. $Q_{pr}\;=\;=0.815\;f_1+8.224f_2+1.858f_3$ where $f_1$ = Reducing sugar (%)/cellulose (%) $f_2=\frac{1}{Total N (%) + Protein (%) + Citric acid (%)}$ $f_3$=Key aromatic compounds ($mg/10g$) 2. The coefficient of correlation between the grades by visible criteria and the values of the quality index for Korean flue-cured tobacco was $\tau$=-0.689 (n=29)

  • PDF