• 전기화학회지
• /
• 제24권3호
• /
• pp.52-64
• /
• 2021

Li_1+xFe_xTi_2-x(PO₄)_3-y(BO₃)_y (x = 0.2, 0.5)계 유리에서 Fe doping과 BO₃ 치환이 유리 또는 결정화유리(glass-ceramics) 전해질의 구조적, 열적 및 전기적 특성에 미치는 영향을 조사하였다. 또한, Li_1.5Fe_0.5Ti_1.5(BO₃)₃ 유리분말을 소결하고, 소결 온도에 따른 결정상과 이온전도도 영향도 검토하였다. Li_1+xFe_xTi_2-x(PO₄)_3-y(BO₃)_y 유리에서 Fe²⁺ 및 Fe³⁺ 이온은 network modifier로서 FeO₆ 팔면체를 형성하거나 network former로서 유리망목구조에 들어가 FeO₄ 유사 사면체를 형성하면서 유리의 구조를 변화시키는 것으로 확인되었다. 한편, BO₃는 BO₃ 또는 BO₄ 그룹을 형성하였는데, BO₃ 치환량이 작은 경우 boron은 (PB)O₄ 망목구조를 형성하지만, BO₃ 치환량이 증가하면 붕소이상현상(boric oxide anomaly)이 생겨나면서 BO₄는 BO₃로 변화하고 이로 인하여 비가교산소(non-bridging oxygen)가 증가하였다. BO₃ 치환은 유리전이온도와 결정화 온도를 낮추는 효과가 있으며, Fe 첨가량이 증가하면 Fe³⁺의 일부는 Fe²⁺로 환원되며, 유리전이온도와 연화온도를 낮아지게 하고 결정화온도를 높아지게 하는 것으로 확인되었다. Li_1+xFe_xTi_2-x(PO₄)_3-y(BO₃)_y (x = 0.2, 0.5) 유리에서 BO₃ 함량이 증가함에 따라 이온전도도는 증가하였으며, x = 0.2 및 0.5에서 각각 8.85×10^-4 및 1.38×10^-4S/cm의 이온전도도값을 나타내었다. 본 연구에서 얻어진 높은 이온전도도는 Fe³⁺의 산화상태 변화와 붕소이상현상에 의한 BO₃ 생성 및 이로 인한 비가교산소의 생성에 기인한 것으로 생각된다. Li_1.5Fe_0.5Ti_1.5(BO₃)₃ 유리를 800℃에서 소결한 결과 이온전도도가 급격히 저하되었는데 이는 결정화유리 분말이 고온에서 유리화되었기 때문으로 생각된다. 따라서 유리분말을 800℃에서 소결한 후, 다시 460℃에서 조핵하고, 600℃에서 결정성장을 시킨 결과, 이온전도도가 열처리전과 동등 수준으로 회복되는 것을 확인하였다.

• 한국재료학회지
• /
• 제18권9호
• /
• pp.475-481
• /
• 2008

Positive temperature coefficient of resistivity (PTCR) characteristics of (1-x)$BaTiO_3-x(Bi_{0.5}K_{0.5})TiO_3$ ceramics doped with $Nb_2O_5$ were investigated in order to develop the Pb-free PTC thermistor available at high temperatures of > $120^{\circ}C$. The PTCR characteristics appearing in the ($B_{i0.5}K_{i0.5})TiO_3$ (< 5 mol%) incorporated $BaTiO_3$ ceramics, which might be mainly due to $Bi^{+3}$ ions substituting for $Ba^{+2}$ sites. The 0.99$BaTiO_3-0.01(Bi_{0.5}K_{0.5})TiO_3$ ceramics showed good PTCR characteristics of a low resistivity at room temperature (${\rho}_r$) of $31{\Omega}{\cdot}cm$ a high ${\rho}_{max}/{\rho}_{min}$ ratio of $5.38{\times}10^3$, and a high resistivity temperature factor (${\alpha}$) of $17.8%/^{\circ}C$. The addition of $Nb_2O_5$ to 0.99$BaTiO_3-0.01(Bi_{0.5}K_{0.5})TiO_3$ ceramics further improved the PTCR characteristics. Especially, 0.025 mol% $Nb_2O_5$ doped 0.99$BaTiO_3-0.01(Bi_{0.5}K_{0.5})TiO_3$ ceramics exhibited a significantly increased ${\rho}_{max}/{\rho}_{min}$ ratio of $8.7{\times}10^3$ and a high ${\alpha}$ of $18.6%/^{\circ}C$, along with a high $T_c$ of $148^{\circ}C$ despite a slightly increased ${\rho}_r$ of $31{\Omega}{\cdot}cm$.

• 생명과학회지
• /
• 제13권4호
• /
• pp.421-427
• /
• 2003

담수 식물 뿌리에 부착하는 미생물의 중금속 흡착력을 조사하기 위하여 Enterobacter intermedious KH410을 분리하여 이 균주에 대한 납과 카드뮴, 구리에 대한 생흡착 특성을 조사하였다. 각각의 중금속에 대한 최저 생육 저지 농도는 납은 1.78 mM, 카드뮴은 0.17 mM, 구리는 1.39 mM 이었다. 흡착에 이용하기 위한 최대 균체 생산은 최적 조건하에서 2.56 g DCW/ $\ell$-medium이었다. 최적 흡착조건은 0.6 g-biomass, pH 4, 온도는 $20^{\circ}C$일 때이었다. 흡착평형은 30분에서, 반응용액은 400 mg/$\ell$이었다. 흡착용량(K)은 구리가 카드뮴의 1.5배, 납은 카드뮴의 1.1배로 구리가 가장 높았으며 흡착강도(1/n)는 카드뮴>구리>납의 순 이었다. 흡착강도에 따른 등온식 적용은 세가지 중금속 모두 Freundlich 흡착등온식이 적합하였다. 건조 균체를 이용한 최대 흡착은 납과 카드뮴, 구리에 대하여 각각 56.2, 58.0, 55.8 mg/g-biomass 이었다. 흡착강도를 높이기 위한 전처리제로는 0.1 M NaOH가 적합하였으며 중금속 별로는 큰 차이를 나타내지 않았다. 한편 중금속 회수를 위한 탈착 시험에서는 납은 0.1 M EDTA에서, 카드뮴과 구리는 0.1 M HNO$_3$에서 높은 탈착율을 나타내었다.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1061-1070
• /
• 2023

Over the last few years, lead-free inorganic metal perovskites have gained impressive ground in empowering satellites in space exploration owing to their material stability and performance evolution under extreme space environments. The present work has examined the versatility of eight such perovskites as space radiation shielding materials by computing their photon, charged particles and neutron interaction parameters. Photon interaction parameters were calculated for a wide energy range using PAGEX software. The ranges of heavy charged particles (H, He, C, N, O, Ne, Mg, Si and Fe ions) in these perovskites were estimated using SRIM software in the energy range 1 keV-10 GeV, and that of electrons was computed using ESTAR NIST software in the energy range 0.01 MeV-1 GeV. Further, the macroscopic fast neutron removal cross-sections were also calculated to estimate the neutron shielding efficiencies. The examined shielding parameters of the perovskites varied depending on the radiation type and energy. Among the selected perovskites, Cs₂TiI₆ and Ba₂AgIO₆ displayed superior photon attenuation properties. A 3.5 cm thick Ba₂AgIO₆-based shield could reduce the incident radiation intensity to half its initial value, a thickness even lesser than that of Pb-glass. Besides, CsSnBr₃ and La_0.8Ca_0.2Ni_0.5Ti_0.5O₃ displayed the highest and lowest range values, respectively, for all heavy charged particles. Ba₂AgIO₆ showed electron stopping power (on par with Kovar) better than that of other examined materials. Interestingly, La_0.8Ca_0.2Ni_0.5Ti_0.5O₃ demonstrated neutron removal cross-section values greater than that of standard neutron shielding materials - aluminium and polyethylene. On the whole, the present study not only demonstrates the employment prospects of eco-friendly perovskites for shielding space radiations but also suggests future prospects for research in this direction.

• 한국대기환경학회지
• /
• 제24권4호
• /
• pp.439-454
• /
• 2008

The purpose of this study was to extensively identify $PM_{10}$ sources and to estimate their contributions to the study area, based on the analysis of the $PM_{10}$ mass concentration and the associated inorganic elements, ions, and total carbon. The contribution of $PM_{10}$ sources was estimated by applying a receptor method because identifying air emission sources were effective way to control the ambient air quality. $PM_{10}$ particles were collected from May to November 2007 in the Yongin-Suwon bordering area. $PM_{10}$ samples were collected on quartz filters by a $PM_{10}$ high-volume air sampler. The inorganic elements (Al, Mn, V, Cr, Fe, Ni, Cu, Zn, Cd, Pb, Si, Ba, Ti and Ag) were analyzed by an ICP-AES after proper pre-treatments of each sample. The ionic components of these $PM_{10}$ samples ($Cl^_$, $NO_3^-$, $SO_4^{2-}$, $Na^+$, $NH_4^+$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$) were analyzed by an IC. The carbon components (OC1, OC2, OC3, OC4, OP, EC1, EC2 and EC3) were also analyzed by DRI/OGC analyzer. Source apportionment of $PM_{10}$ was performed using a positive matrix factorization (PMF) model. After performing PMF modeling, a total of 8 sources were identified and their contribution were estimated. Contributions from each emission source were as follows: 13.8% from oil combustion and industrial related source, 25.4% from soil source, 22.1% from secondary sulfate, 12.3% from secondary nitrate, 17.7% from auto emission including diesel (12.1%) and gasoline (5.6%), 3.1% from waste incineration and 5.6% from Na-rich source. This study provides information on the major sources affecting air quality in the receptor site, and therefore it will help us maintain and manage the ambient air quality in the Yongin-Suwon bordering area by establishing reliable control strategies for the related sources.

• 지질공학
• /
• 제2권2호
• /
• pp.173-200
• /
• 1992

대구시 중심부의 지하수는 신천과 범어천 등의 하천수를 주 공급원으로 하기 때문에 그 수질은 이들 하천수의 영향을 많이 받고 있다. 그리고 하천의 수질은 하천이 발원한 지역의 암류와 밀접한 관계를 가지므로 안산암가 몬조니암을 상류에 두고 있는 신천과 범어천의 수질은 이들 화성암류의 영향을 받게 된다. 마찬가지로 반야월층이나 함안층에서 발원하는 하천의 수질은 이들 퇴적암류의영향을 받고 있다. 본 역 상류천이 pH는 하천이 발원하는 암류에 따라 차이를 보이는데 화성암류(안산암, 몬조니암)지역은 약산성 - 중성이고 퇴적암류지역은 약알카리성을 띤다. Ca와 Mg 함량은 퇴적암류지역 하천이 화성암류지역 하천보다 현저히 높으나, Na 함량은 퇴적암류지역 하천이 화성암류지역 하천보다 약간 높은 경향을 보이며, K 함량은 암산암지역보다 반야월층이 오히려 약간 낮은 경향을 띈다. 중금속원소의 함량도 역시 주택지대와 공장지대가 있는 퇴적암지역 하천이 비오염 화성암류지역 하천보다. 높은 경향을 띤다. $NO_3-N$ 함량도 퇴적암류지역 하천이 화성암류지역 하천보다 높다. 지하수의 수질은 암층의 여과작용에 의하여 오염하천수에 비하면 금속이온의 함량이 현저히 낮으나 화성암지대의 오염되지않은 상류천 수질에 비하면 많이 오염되어 있다. 그리고 오염의 정도도 주택지대가 있는 반야월층지역보다 공장지대가 있는 함안층지역에서 심하다. pH는 반야월층과 함안층지역이 비슷하나 주원소의 함량은 함안층지역이 반야월층지역 보다 대체로 높은 경향을 보인다. 중금속원소의 함량은 양 지층의 지역간에 근소한 차이를 보이나, 오염이 심한 공단천과 달서천 부근의 지하수는 함안층 지하수는 Cu, Pb, Zn, Mn, Fe의 함량이 높다.

• 한국대기환경학회지
• /
• 제29권1호
• /
• pp.74-85
• /
• 2013

Since the underground transportation system is a closed environment, indoor air quality problems may seriously affect many passengers' health. The purpose of this study was to understand $PM_{10}$ characteristics in the underground air environment and further to quantitatively estimate $PM_{10}$ source contributions in a Seoul Metropolitan subway station. The $PM_{10}$ was intensively collected on various filters with $PM_{10}$ aerosol samplers to obtain sufficient samples for its chemical analysis. Sampling was carried out in the M station on the Line-4 from April 21 to 28, July 13 to 21, and October 11 to 19 in the year of 2010 and January 11 to 17 in the year of 2011. The aerosol filter samples were then analyzed for metals, water soluble ions, and carbon components. The 29 chemical species (OC1, OC2, OC3, OC4, CC, PC, EC, Ag, Al, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Si, Ti, V, Zn, $Cl^-$, $NO_3{^-}$, $SO_4{^{2-}}$, $Na^+$, $NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$) were analyzed by using ICP-AES, IC, and TOR after proper pretreatments of each sample filter. Based on the chemical information, positive matrix factorization (PMF) model was applied to identify the $PM_{10}$ sources and then six sources such as biomass burning, outdoor, vehicle, soil and road dust, secondary aerosol, ferrous, and brakewear related source were classified. The contributions rate of their sources in tunnel are 4.0%, 5.8%, 1.6%, 17.9%, 13.8% and 56.9% in order.

• 분석과학
• /
• 제10권3호
• /
• pp.187-195
• /
• 1997

[16]-ane-$S_4$/탄소분말 함량비를 50%로 하여 nujol oil과 혼합하여 수식전극을 제조하였다. $5.0{\times}10^{-4}M$ $Ag^+$를 포함하는 pH 4.5인 아세트 완충용액에 수식전극을 담가 $Ag^+$를 전극 표면에 흡착시켰다. 이 때 흡착시간을 15분으로 하고 전해환원시키는 시간은 -0.3V vs S.C.E에서 2분으로 하였다. 또한 0.1M $HNO_3$ 용액으로 전극을 활성화시켰으며 한번 활성화한 전극은 10회까지 사용이 가능하였다. 최적 분석조건에서 미분펄스 전압전류법으로 $5.0{\times}10^{-7}{\sim}1.5{\times}10^{-6}M$ 사이의 농도 범위에서 정량해 보았을 때 직선성이 잘 성립하였으며, 검출한계는 $2.0{\times}10^{-7}M$이었다. 대부분의 금속들은 방해를 주지 않았으나, Cu(II)은 방해를 나타내었다.

• 한국대기환경학회지
• /
• 제26권5호
• /
• pp.543-553
• /
• 2010

Almost five million citizens a day are using subways as a means of traffic communication in the Seoul metropolitan. As the subway system is typically a closed environment, indoor air pollution problems frequently occurs and passengers complain of mal-health impact. Especially $PM_{10}$ is well known as one of the major pollutants in subway indoor environments. The purpose of this study was to compare the indoor air quality in terms of $PM_{10}$ and to quantitatively compare its source contributions in a Seoul subway platform before and after installing platform screen doors (PSD). $PM_{10}$ samples were collected on the J station platform of Subway Line 7 in Seoul metropolitan area from Jun. 12, 2008 to Jan. 12, 2009. The samples collected on membrane filters using $PM_{10}$ mini-volume portable samplers were then analyzed for trace metals and soluble ions. A total of 18 chemical species (Ba, Mn, Cr, Cd, Si, Fe, Ni, Al, Cu, Pb, Ti, $Na^+$, $NH_4^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, and ${SO_4}^{2-}$) were analyzed by using an ICP-AES and an IC after performing proper pre-treatments of each sample filter. Based on the chemical information, positive matrix factorization (PMF) model was applied to identify the source of particulate matters. $PM_{10}$ for the station was characterized by three sources such as ferrous related source, soil and road dust related source, and fine secondary aerosol source. After installing PSD, the average $PM_{10}$ concentration was decreased by 20.5% during the study periods. Especially the contribution of the ferrous related source emitted during train service in a tunnel route was decreased from 59.1% to 43.8% since both platform and tunnel areas were completely blocked by screen doors. However, the contribution of the fine secondary aerosol source emitted from various outside combustion activities was increased from 14.8% to 29.9% presumably due to ill-managed ventilation system and confined platform space.

• 한국환경보건학회지
• /
• 제23권3호
• /
• pp.27-39
• /
• 1997

This study, collaborated Gifu University, Japan, was performed to analyze chemical pollutants and microorganism and to clarify the distribution of sulfate-reducing bacteria and their insolubilization of heavy metal ions in leachates sampled seasonally between 1994 and 1996 from Nanjido waste landfill site, sampled 4 times between 1995 and 1996 from Pusan and Daejeon waste landfill site, and sampled 1 time between 1992 and 1994 from Hokkaido, Nagoya, Osaka and Hukuoka waste landfill site in Japan. The results were as follows: 1. The temperatures of internal leachate and leachate effluent were 40$\circ$C and 30$\circ$C, respectively, and the pH values of both leachates were about 8.0 at Nanjido waste landfill site. The concentration of SO$_4^{-2}$ gradually increased with the degree of stabilization and that of NO$_3$-N was detected in a part of sampling sites at one and half years, and in all sampling sites at 3 years after completion of landfill. 2. The organic substances in leachate of Nanjido waste landfill site decreased with the degree of stabilization and they were very fluctuated with measuring point and time. The concentration of organic substance and heavy metals in internal leachate were higher than in leachate effluent and those of Cd, Hg, and Pb were lower than detection limit except a part of samples in 1996. 3. APCs in internal leachate and leachate effluent were not much different and the minimum of APCs in internal leachate and leachate effluent were $1.0\times 10^4$/ml and $4.0\times 10^1$/ml, respectively. 4. The maximums of SRBs in Nanjido, Pusan, and Daejeon waste landfill site were 9180 MPN/ml, 24000 MPN/ml, and 348 MPN/ml, respectively and the maximum of SRBs in Japan waste landfill site was 9300 MPN/ml. 5. During 2-week-SRB culture, the values of MPN were high at 50$\circ$C for initial culture period and at 30$\circ$C for last culture period. MPN started to appear at first day and rapidly increased between 7th day and 9th day. 6. Cadmium and copper were insolubilized by SRB within 6 hr and iron and zinc were done within 48 hr. The rates of insolubilization of Cd, Cu, Fe, Zn, T-Cr were 100%, 99.5%, 95.0%, 99.8%, 16.1% after 48 hr treatment with SRB, respectively.