• The Korean Journal of Nuclear Medicine
• /
• v.23 no.1
• /
• pp.63-69
• /
• 1989

In order to develop technetium-99m-labelled human albumin microsphere (HAM) for lung scintigraphy, various experimemts such as preparation and fractionation of HAM, establishment of optimal labelling conditions, determination of radiochemical purity, stability test and biodistribution of $^{99m}Tc-HAM$ were carried out. HAM was prepared from the suspension of 1ml aqueous human serum albumin (25%) in 130 ml of olive oil at $130\sim135^{\circ}$ with vigorous stirring. The resulting HAM was fractionated with microsieve to get the desired particle size $(15\sim50\mu)$ and autoclaved for sterilizaiton. The HAM particles were treated with stannous chloride and the pH of the suspension was adjusted to $3.0\sim3.5$ with phosphate buffer. After freeze-drying the contents of single reaction vial containing 5 mg of HAM and 0.2 mg of $SnCl_2$ it was reacted with $Na^{99m}TcO_4$. The labelling yield was higher than 99.5% and the stability of $^{99m}Tc-HAM$ was high enough to maintain 99.1% of radiochemical purity up to 24 hours. Lung and liver uptake in mice was found to be 94% and 0.9%, respectively. Excellent rabbit and human lung scans were also obtained.

• Journal of Sensor Science and Technology
• /
• v.32 no.3
• /
• pp.169-173
• /
• 2023

With the increasing concern of global warming caused by greenhouse gases owing to the recent industrial development, there is a growing need for advanced technology to control these emissions. Among the various greenhouse gases, nitrogen dioxide (NO₂) is a major contributor to global warming and is mainly released from sources, such as automobile exhaust and factories. Although semiconductor-type NO₂ gas sensors, such as SnO₂, have been extensively studied, they often require high operating temperatures and complicated manufacturing processes, while lacking selectivity, resulting in inaccurate measurements of NO₂ gas levels. To address these limitations, a novel sensor using PbS quantum dots (QDs) was developed, which operates at low temperatures and exhibits high selectivity toward NO₂ gas owing to its strong oxidation reaction. Furthermore, the use of P3HT conductive polymer improved the thin film quality, reactivity, and reaction rate of the sensor. The sensor demonstrated the ability to accurately measure NO₂ gas concentrations ranging from 500 to 100 ppm, with a 5.1 times higher sensitivity, 1.5 times higher response rate, and 1.15 times higher recovery rate compared with sensors without P3HT.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.464-472
• /
• 2002

The aim of this study was to elucidate dyeability and antimicrobial activity of cotton fabrics dyed with Sophora Radix extracts according to various mordants. Dyes were extracted from Sophora Radix using ethanol. Then, cotton fabrics were dyed with extracts two times by post-mordanting method in which the extract was 60% (owf, the mordant was 3% (owf), L.R was 1:20, the temperature was 60~7$0^{\circ}C$, the time of dyeing was 60min., and the time of mordanting was 60min.. The dyeability was evaluated by surface color and color fastness. The skin microorganism was evaluated on S. sureus, B. subtilis, S. epidermidis, P. acnes, P. aeruginosa, E. coli, A. niger, C. albicans and T. mentagrophytes. The results are as follows; 1. When mordants were treated, surface color was 3.3Y to 0.1 GY in H (hue) value which indicated greenish yellow to yellow 2. The color fastness to perspiration, dry-cleaning, rubbing, and washing stain fabric showed 4~5 degree. The color fastness to light was improved to 4 degree by treatment of mordants. The color fastness to washing was 2 degree which was somewhat poor. 3. Cotton dyed with ethanol extracts was excellent on S. aureus, B. subtilis, S. epidermidis and p. antis. But that showed poor antibacterial activities on P. aeruginosa and E. coli such as gram negative baterials 4. Antibacterial activity of cotton fabrics dyed didn't be improved by treatment of mordant 5. Antifungal activity of cotton dyed with ethanol extracts was excellent on T. mentagrophytes. Especially, on T. mentagrophytes there was no growth of fungus during 72 hours in cotton dyed mordanting with SnCl$_2$.$_2$$H_2O$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.264-264
• /
• 2016

최근에 charge trap flash (CTF) 기술은 절연막에 전하를 트랩과 디트랩 시킬 때 인접한 셀 간의 간섭현상을 최소화하여 오동작을 줄일 수 있으며 낸드 플래시 메모리 소자에 적용되고 있다. 낸드 플래시 메모리는 고집적화, 대용량화와 비휘발성 등의 장점으로 인해 핸드폰, USB, MP3와 컴퓨터 등에 이용되고 있다. 기존의 실리콘 기반의 플래시 메모리 소자는 좁은 밴드갭으로 인해 투명하지 않고 고온에서의 공정이 요구되는 문제점이 있다. 따라서, 이러한 문제점을 개선하기 위해 실리콘의 대체 물질로 산화물 반도체 기반의 플래시 메모리 소자들이 연구되고 있다. 산화물 반도체 기반의 플래시 메모리 소자는 넓은 밴드갭으로 인한 투명성을 가지고 있으며 저온에서 공정이 가능하여 투명하고 유연한 기판에 적용이 가능하다. 다양한 산화물 반도체 중에서 비정질 In-Ga-Zn-O (a-IGZO)는 비정질임에도 불구하고 우수한 전기적인 특성과 화학적 안정성을 갖기 때문에 많은 관심을 받고 있다. 플래시 메모리의 고집적화가 요구되면서 절연막에 high-k 물질을 atomic layer deposition (ALD) 방법으로 적용하고 있다. ALD 방법을 이용하면 우수한 계면 흡착력과 균일도를 가지는 박막을 정확한 두께로 형성할 수 있는 장점이 있다. 또한, high-k 물질을 절연막에 적용하면 높은 유전율로 인해 equivalent oxide thickness (EOT)를 줄일 수 있다. 특히, HfOx와 AlOx가 각각 trap layer와 blocking layer로 적용되면 program/erase 동작 속도를 증가시킬 수 있으며 넓은 밴드갭으로 인해 전하손실을 크게 줄일 수 있다. 따라서 본 연구에서는 ALD 방법으로 AlOx와 HfOx를 게이트 절연막으로 적용한 a-IGZO 기반의 thin-film transistor (TFT) 플래시 메모리 소자를 제작하여 메모리 특성을 평가하였다. 제작 방법으로는, p-Si 기판 위에 열성장을 통한 100 nm 두께의 SiO2를 형성한 뒤, 채널 형성을 위해 RF sputter를 이용하여 70 nm 두께의 a-IGZO를 증착하였다. 이후에 소스와 드레인 전극에는 150 nm 두께의 In-Sn-O (ITO)를 RF sputter를 이용하여 증착하였고, ALD 방법을 이용하여 tunnel layer에 AlOx 5 nm, trap layer에 HfOx 20 nm, blocking layer에 AlOx 30 nm를 증착하였다. 최종적으로, 상부 게이트 전극을 형성하기 위해 electron beam evaporator를 이용하여 platinum (Pt) 150 nm를 증착하였고, 계면 결함을 최소화하기 위해 퍼니스에서 질소 가스 분위기, $400^{\circ}C$, 30 분의 조건으로 열처리를 했다. 측정 결과, 103 번의 program/erase를 반복한 endurance와 104 초 동안의 retention 측정으로부터 큰 열화 없이 메모리 특성이 유지되는 것을 확인하였다. 결과적으로, high-k 물질과 산화물 반도체는 고성능과 고집적화가 요구되는 향후 플래시 메모리의 핵심적인 물질이 될 것으로 기대된다.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.655-666
• /
• 2005

This study was performed to measure physicochemical and textural characteristics, and shelf-life effect of low-fat functional sausages(LFFSs) manufactured with sodium lactate(SL, 3.3%), lac pigment and various molecular weights(MWs) of chitosan (Low=1.5 kDa, Med=30-50 kDa and High=200 kDa) during storage at 15$^{\circ}C$ for 18 days. LFFSs had 73.7-76.0% moisture, lower than 3% fat and 14-15% protein, respectively. pH values were 6.05-6.44 and the control(150 ppm, $NaNO_2$) was the lowest among LFFSs (p<0.05). Increasing storage time decreased pH values, but no differences in pH values were observed up to 6 days of storage (p>0.05). LFFSs containing SL and low MW of chitosan improved water holding capacity (WHC) and different from those with SL and medium-MW chitosan. WHC was decreased with increased storage time and differences of WHC were observed from 18 days of storage. The addition of chitosan reduced both lightness and redness values, as compared to 150 ppm sodium nitrite(SN), and increased storage time decreased yellowness(p<0.05), especially at 12 days of storage. LFFSs with SL and medium-MW chitosan increased most textural properties compared to the control(p<0.05). The addition of SN of 150 ppm in LFFSs retarded microbial growth for E. coli 0157:H7, while those with SL tended to have an antimicrobial effect for Listeria monocytogenes(LM). The growth rate of LM was delayed by addition of various MW of chitosans in LFFSs, especially high MW chitosan, as compared to LFFSs containing SL alone. These results indicated that the functional, textural and antimicrobial effects of LFFSs were improved by addition SL and various MW of chitosan combinations. In addition, 0.05% lac pigment improved the cure color of LFFSs similar to those of 150 ppm SN.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.187-197
• /
• 1999

해양수산부가 개발 .운영 중인 항만운영정보시스템(PORT-MIS)은 선박입출항 관련 업무, 수출입 화물 반출입에 관한 업무, 항만시설물관리에 관한 업무, 의사결정지원시스템에 관한 업무 등 크게 4개 업무오 구성되어 있으며, 총 19개의 전자문서와 1,500여개의 단위 프로그램으로 구성되어 있다. 그동안 PORT-MIS를 권역별로 확대 운영하면서 발생한 여러 가지 문제점들을 보완하기 위해 해양수산부와 정보통신부(한국전산원)가 공동으로 $\ulcorner$수출입화물 일괄처리시스템 구축$\lrcorner$ 용역 사업을 현재 진행 중에 있다. 본 연구는 용역과업 내용에 포함되어 있지 않으면서 개선이 필요한 외항선(국전선.외국전선 포함) 선박입항보고서(최초.변경.최종)와 선박출항보고서(최초.변경.최종), 내항선입.출항신고서, 예선사용허가신청서 및 지정서, 도선사용허가신청서 및 지정서 등의 민원업무를, 사용자로 하여금 최소한의 노력으로 처리할 수 있도록 제출방법을 개선(EDI방식에서 온라인방식으로)하여 행정소요시간을 단축함으로써 PORT-MIS의 효율성을 높일 수 있는 방안을 제시하고자 한다. 이러한 노력을 통해 PORT-MIS EDI업무가 개선되어 선박입.출항보고를 1회롤 처리할 수 있다면 연간 29만9천건의 서류절감으로 약 1억3천7백만원의 물류비를 줄일 수 있으며, 시간 단축에 따른 간접비용을 계산하면 보다 많은 효과가 있다고 판단된다. 그리고 내항선입.출항신고서 및 예.도선업무를 EDI방식에서 온라인방식으로 전환함으로써 선사와 예선업체 및 도선사협회가 대화형식으로 업무처리가 이루어져 분쟁을 최소화 할 수 있다면, 전자문서 31만6천건/년 절감으로 1억3백만원/년의 예산이 절감될 것으로 예상된다.rr로 변화시켰고 inductive power는 200~800watt, bias voltage는 0~-200voltage로 변화시켰으며 식각마스크로는 SiO2를 patterning 하여 사용하였다. n-GaN, p-GaN 층 이외에 광소자 제조시 필수적인 InGaN 층을 100% Cl2로 식각한 경우에 InGaN의 식각속도가 GaN에 비해 매우 낮은 식각속도를 보였다. Cl2 gas에 소량의 CH4나 Ar gas를 첨가하는 경우와 공정압력을 감소시키는 경우 식각속도는 증가하였고, Cl2/10%Ar 플라즈마에서 공정 압력을 감소시키는 경우 식각속도는 증가하였고, Cl2/10%CHF3 와 Cl2/10%Ar 플라즈마에서 공정압력을 15mTorr로 감소시키는 경우 InGaN과 GaNrks의 선택적인 식각이 가능하였다. InGaN의 식각속도는 Cl2/Ar 플라즈마의 이온에 의한 Cl2/CHF3(CH4) 플라즈마에서의 CHx radical 형성에 의하여 증가하는 것으로 사료되어 진다.$ 이상을 나타내었다. 박막의 Sn/In atomic ratio는 0.12, O/In의 비율은 In2O3의 화학양론적 비율인 1.5보다 작은 1.3을 나타내었다.로 보인다.하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인 모양을 가지는 성장의 경우도 cluster 밀도, cluster 모양, cluster의 양 축 방향 길이 비, 양 축 방향의 평균 팔 넓이로부터 각 축 방향의 분산 장벽을 얻어낼 수 있을 것으로 보인다. 기대할 수 있는 여러

• Economic and Environmental Geology
• /
• v.29 no.4
• /
• pp.411-419
• /
• 1996

The Janggun magnetite deposits occur as the lens-shaped magnesian skarn, magnetite and base-metal sulfide orebodies developed in the Cambrian Janggun Limestone Formation. The K-Ar age of alteration sericite indicates that the mineralization took place during late Cretaceous age (107 to 70 Ma). The ore deposition is divided into two stages as a early skarn and late hydrothermal stage. Mineralogy of skara stage (107 Ma) consists of iron oxide, base-metal sulfides, Mg-Fe carbonates and some Mg- and Ca-skarn minerals, and those of the hydrothermal stage (70 Ma) is deposited base-metal sulfides, some Sb- and Sn-sulfosalts, and native bismuth. Based on mineral assemblages, chemical compositions and thermodynamic considerations, the formation temperature, $-logfs_2$, $-logfo_2$ and pH of ore fluids progressively decreased and/or increased with time from skarn stage (433 to $345^{\circ}C$, 8.8 to 9.9 atm, 29.4 to 31.6 atm, and 6.1 to 7.2) to hydrothermal stage (245 to $315^{\circ}C$, 11.2 to 12.3 atm, 33.6 to 35.4 atm, and 7.3 to 7.8). The ${\delta}^{34}S$ values of sulfides have a wide range between 3.2 to 11.6‰. The calculated ${\delta}^{34}S_{H_2S}$ values of ore fluids are relatively homo-geneous as 2.9 to 5.4‰ (skam stage) and 8.7 to 13.5‰ (hydrothermal stage), which are a deep-seated igneous source of sulfur indicates progressive increasing due to the mixing of oxidized sedimentary sulfur with increasing paragenetic time. The ${\delta}^{13}C$ values of carbonates in ores range from -4.6 to -2.5‰. Oxygen and hydrogen isotope data revealed that the ${\delta}^{38}O_{H_2O}$ and ${\delta}D$ values of ore fluids decreased gradually with time from 14.7 to 1.8‰ and -85 to -73‰ (skarn stage), and from 11.1 to -0.2‰ and -87 to -80‰ (hydrothermal stage), respectively. This indicates that magmatic water was dominant during the early skarn mineralization but was progressively replaced by meteoric water during the later hydrothermal replacement.

• The Korean Journal of Nuclear Medicine
• /
• v.24 no.1
• /
• pp.49-55
• /
• 1990

For the development of $^{99m}Tc-labelled$ 3-iodo-2,4,6-trimethyl-iminodiacetic acid $(^{99m}Tc-IOTIDA)$, various experiments such as synthesis of IOTIDA, establishment of labelling conditions, determination of radiochemical purity, examination of stability, and organ distribution of rat were carried out. 1) IOTIDA was synthesized with a total yield of 42% from the starting material of 2,4-6-trimethylaniline via chloroacetylation, iodination, and condensation with iminodiacetic acid (IDA). 2) Freeze-dried instant labelling kits were prepared from aqueous solution $(pH\;5.8\sim6.0)$ so as to contain 40 mg IDA compound and 0.4 mg $SnCl_2$, per vial. Labelling of the contents of kit vials with $Na^{99m}TcO_4$, exhibited formation of two kinds of complex which was identified by ITLC-SA. After labelling, complex ( I ) was gradually converted to complex (II) with time. Labelling yield and radiochemical purity were above 99.5% based on the two complexes over-all. 3) $^{99m}Tc-IOTIDA$ maintained high radiochemical purity of above 99% until 6 hours after preparation at room temperature. Instant labelling kits stored at $4^{\circ}C$ for 6 month period also exhibited high labelling yield of above 99%. 4) Results obtained from animal experiments showed that most of the $^{99m}Tc-IOTIDA$ was rapidly excreted through hepatobiliary track into the intestines but with negligible renal excretion.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.2
• /
• pp.69-80
• /
• 1975

Relationships between yield and various nitrogen efficiencies, between efficiencies and between efficiency and nitrogen uptake amount of rice plant were proposed and tested using data from N.P.K simple trials about 30 to 50 locations, for three years. Established relationships are well in accordance with experimental results by showing highly significant correlations between them. The overall indications are that high yielding capacity of fields with fertilizer application, depends primarily on high fertilizer nitrogen uptake by increasing fertilizer use efficiency (Eu), secondly the efficiency (Ef) of absorbed fertilizer nitrogen (Nf) and fertilization efficiency (Fe) and also depends much on nitrogen efficiency for grain yield (E) to great extend and that the efficiency (Es) of soil nitrogen (Ns) contributes to E more than Ef does. All nitrogen efficiencies are negatively correlated with the uptake amount of corresponding nitrogen and counterpart efficiency. Es and Ef could be determined firstly by difference method and secondly E versus Cs (Cs=Ns/Ns+Nf) plotting and thirdly E-Cs plotting with labelled fertilizermethod using the equation E=Es Cs+B where B=Ef Cf but a constant under the given condition and at last Y-Ns plotting with labelled fertilizer using Eq Y=$Es{\cdot}Ns+B$ where B=$Ef{\cdot}Nf$. Es which seems not much variable from field to field is mostly greater (about 80% of tested fields) than Ef which is much variable and depends much on fertilizer form. The relationships tested and well agreed are as follows: 1. Y=$Es{\cdot}Ns+Ef{\cdot}Nf$ (Y is yield) 2. E=$Es{\cdot}Cs+Ef{\cdot}Cf$ where Cf=Nf/Nf+Ns 3. E=b-aN where E=E, Es or Ef and N=N, Ns or Nf respectively, (E=Y/N, N=Nf+Ns), b is theoretical maximum under the given system and a is tangent at N=O of the curve, Y=EN. 4. Fe=Ef Eu and Se=$Es{\cdot}Eu$ where Se is efficiency of soil available nitrogen. 5. E=$(Se{\cdot}Cs+Fe{\cdot}Cf)/Eu$ 6. Y=$Es{\cdot}Eu{\cdot}Sf+Ef{\cdot}Eu{\cdot}Fn$or Y=$Es{\cdot}Eu{\cdot}Ea{\cdot}Sn+Ef{\cdot}Eu{\cdot}Fn $where Sf=$Ea{\cdot}Sn$, Ea is soil available nitrogen equivalent to fertilizer(Sf) divided by total soil nitrogen (Sn).

• The Korean Journal of Nuclear Medicine
• /
• v.23 no.1
• /
• pp.71-83
• /
• 1989

For the development of $^{99m}Tc-labelled$ antimony sulfide colloid and hydroxyethyl starch, various experiments such as preparation of colloid, control of the distribution of particle size, establishment of labelling conditions, determination of labelling yield and radiochemical purity, examination of stability, and organ imagings of rabbits etc. were carried out. 1) Antimony sulfide colloid was readily prepared by the reaction of aqueous solution of antimony potassium tartrate with hydrogen sulfide generated by treating ferrous sulfide with dilute sulfuric acid. The colloid could be stabilized by adding small amount of polyvinylpyrrolidone. 2) Electron microscopy analysis exhibited the distribution of colloid size in the range of $1\sim15nm$ with a major portion of 9 m. The colloid solution was sterilized by membrane filtration $(0.2{\mu}m)$ and then stored at $4^{\circ}C$. This sterilized colloid was so stable that it was usable at least for one year. 3) The antimony sulfide colloid was labelled by adding sodium $pertechnetate-^{99m}Tc$ solution to the reaction vial, followed by adding hydrochloric acid and then boiled for 30 min. The optimal pH of the reaction mixture was found to be in the range of $1.3\sim1.4$. Instant thin layer chromatography (ITLC) analysis showed high labelling yield of above 99.5%. This labelled colloid maintained high radio-chemical purity of above 99% until 10 hours after labelling. 4) Animal studies showed high uptake of $^{99m}Tc-Sb_2S_3$ colloid at lymph vessels and nodes indicating a suitable agent for lymphoscintigraphy. Satisfactory results were also abtained in other clinical studies. 5) Hydroxyethyl starch (HES $0.6\sim1.0%$) was labelled with $Na^{99m}TcO_4$ in the presence of $SnCl_2$ with high labelling yield of above 99.5%. The optimal pH of the reaction mixture was in the range of $1.8\sim2.0$. $^{99m}Tc-HES$ maintained high radiochemical purity of above 99% until 10 hours after labelling. 6) Animal studies showed that $^{99m}Tc-HES$ migrated more rapidly from the injection sites into the lymph vessels than $^{99m}Tc-Sb_2S_3$ colloid while less amount of the former was uptaken at lymph nodes than that of the latter. Similar phenomenon was also observed in other clinical studies. As a result, $^{99m}Tc-Sb_2S_3$ colloid was found to be more effective lymphoscintigraphic agent than $^{99m}Tc-HES$.