• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.418-428
• /
• 2007

Physical and chemical properties of the aggregate by-products including sludge and crushed dust samples collected from the 21 private companies throughout the country were analyzed to evaluate possible usage of the by-products as artificial soil materials for plantation. The pH of the materials ranged from 8.0 to 11.0. The organic matter content was $2.85g\;kg^{-1}$, and the total nitrogen content and available phosphate content were low as 0.7 percents and $12.98mg\;kg^{-1}$, respectively. Exchangeable $Ca^{2+}$, $Mg^{2+}$, $K^+$, and $Na^+$ were 2.29, 0.47, 0.02 and $0.05cmol\;kg^{-1}$, respectively. Heavy metal contents were lower than the limits regulated by environmental law of Korea. Textural analysis showed that most of the materials were silt loam with low water holding capacity ranged from 0.67 to 7.41 percents, and with low hydraulic conductivity ranged from 0.4 to $2.8m\;s^{-1}$. Mineralogical analysis showed that the aggregate by product materials were mostly composed of silicate, alumina and ferric oxides except calcium oxide dominant materials derived from limestones. The primary minerals were quartz, feldspars and dolomites derived from granite and granitic gneiss materials. Some samples derived from limestone material showed calcite and graphite together with the above minerals. According to the result, it can be concluded that the materials could be used as the artificial soil material for plantation after proper improvement of the physico-chemical properties and fertility.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.8
• /
• pp.1179-1186
• /
• 2010

The antiradical property of hot water extract from dried radish (DR) or dried radish roasted with pressure (DRRP) was investigated in vitro and in LLC-PK1 cell system. The contents of total free amino acid and reducing sugar in DR were decreased by 72.86% and 3.17%, respectively, after pressurized roasting. In vitro test, $IC_{50}$ for DR and DRRP for DPPH radical scavenging activity were 646.70 and $135.45\;{\mu}g/mL$, 896.10 and $566.98\;{\mu}g/mL$ for superoxide anion radical, and 722.26 and $531.84\;{\mu}g/mL$ for hydroxy radical, respectively. The radical scavenging effects of DRRP was significantly greater than those for DR (p<0.001). These radical scavenging effects of DR and DRRP were confirmed in LLC-$PK_1$ at which oxidative stresses were induced by superoxide, nitric oxide and peroxynitrite generated in the treatment of pyrogallol, SNP, and SIN-1, respectively. Cell viability was increased in the presence of DR or DRRP, dose dependently (p<0.05), and TBARS formation was decreased. The protective effects of DRRP against oxidative damage in LLC-$PK_1$ were greater than those of DR at the same concentration tested (p<0.05). This superior antiradical activity of DRRP might be due to the products produced during the pressurized roasting in addition to the antioxidative compounds originally present in the radish. 5-hydroxyl methyl furfural (5-HMF) known as an intermediate product of the maillard reaction was detected in DRRP (0.57 mg/g), but not from DR. In conclusion, daily consumption of DRRP may prevent oxidative damage by retarding oxidative stress.

• Korean Journal of Veterinary Research
• /
• v.34 no.3
• /
• pp.517-527
• /
• 1994

An attempt was made to isolate a causative viral agents from the fecal specimens of the diseased dogs with the gastroenteritis symptoms. Two coronavirus-like agents were isolated by serial dilution end point method and plaque assay. The isolates were characterized in terms of cytopathology, antigenicity, replication, physicochemical and morphological properties. The results obtained through the experiment were as follows; 1. Among 7 fecal specimens collected from the dogs with enteric disease, 2(28.6%)coronavirus-like agents showing typical cytopathic effects of canine coronavirus were isolated, and designated as CCV D1 and CCV D2, respectively. 2. By the cross-neutralization test and indirect immunofluoresence antibody test, the isolates were antigenically indentified as the standard CCV. The viruses were replicated only in the cytoplasm of A-72 cells. 3. The isolates showed no haemagglutinating activity against the erythrocytes from 11 kinds of animals. 4. The electron microscopic observation for the isolates showed spherical and pleomorphic features, covered with club-shaped projections on the surface. The size of particles was ranged from 70 to 150nm. 5. In one-step growth curve for the isolates in A-72 cells, maximum titers of intracellular vius was $10^{4.6}$ $TCID_{50}/0.1ml$ at 46 hrs postinoculation(pi) of CCV Dl and $10^{4.4}$ $TCID_{50}/0.1ml$ at 34 hrs pi of CCV D2. The maximum titers of extracellular virus was $10^{5.5}$ $TCID_{50}/0.1ml$ at 58 hrs pi of CCV D1 and $10^{5.8}$ $TCID_{50}/0.1ml$ at 46 hrs pi of CCV D2. 6. In physicochemical property test, the isolates were very sensitive to choroform and were found to be RNA virus. The viruses was stable at pH 3.0 for 1 hr and at $22{^{\circ}C}$ for 5 hrs. However, infectivity titers reduced remarkably by treatment with $56{^{\circ}C}$ for 10min.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.1
• /
• pp.9-15
• /
• 2011

BACKGROUND: This study was conducted to evaluate the effects of the fertilizer sources and ground cover mulches on nutrient release, growth, and photosynthesis in small one-year-old apple (Malus ${\times}$ domestica Borkh.) trees in controlled conditions. METHODS AND RESULTS: Treatments included no fertilizer (NF), commercial organic fertilizer (CF), and poultry litter (PL) for fertilizer treatments, and wood chips (WC), shredded paper (SP), green compost (GC), and grass clippings (GR) for cover mulch treatments. All treatments were applied proportionally based on the volume ratio equivalent to the soil. CF, PL, and GR treatments that had optimum carbon (C) and nitrogen (N) ratios (less than 30:1) for N mineralization through the microbes released the greatest $NH_4^+$ concentrations in the pot media at 90 days after the treatments, but GC mulch with the optimum C:N ratio did not. CF-, PL- and GR-treated plants had the largest leaf area, thickest stem diameter, longest shoot extension, and greater dry matter production. CONCLUSION(s): CF and PL showed an suitable organic nutrient source for improving plant growth in an orchard. Interestingly, GR also could be a nutrient source for tree growth, if vegetation competition is controlled by maintaining vegetation height and recycling enough grass clippings to the soil in an orchard.

• Journal of Marine Bioscience and Biotechnology
• /
• v.7 no.2
• /
• pp.58-70
• /
• 2015

Injectable RGD-bioconjugated Mussel Adhesive Proteins (RGD-MAPs) composite hydroxypropyl methylcellulose (HPMC) hydrogels provide local periodontal tissue for bone filling in periodontal surgery. Previously we developed a novel type of injectable self-supported hydrogel (2 mg/ml of RGD-MAPs/HPMC) based porcine nano hydroxyapatite (MPH) for dental graft, which could good handling property, biodegradation or biocompatibility with the hydrogel disassembly and provided efficient cell adhesion activity and no inflammatory responses. Herein, the aim of this work was to evaluate bone formation following implantation of MPH and collagen membrane in rabbit calvarial defects. Eight male New Zealand rabbits were used and four circular calvarial defects were created on each animal. Defects were filled with different graft materials: 1) collagen membrane, 2) collagen membrane with MPH, 3) collagen membrane with bovine bone hydroxyapatite (BBH), and 4) control. The animals were sacrificed after 2 and 8 weeks of healing periods for histologic analysis. Both sites receiving MPH and BBH showed statistically increased augmented volume and new bone formation (p < 0.05). However, there was no statistical difference in new bone formation between the MPH, BBH and collagen membrane group at all healing periods. Within the limits of this study, collagen membrane with MPH was an effective material for bone formation and space maintaining in rabbit calvarial defects.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.2
• /
• pp.568-577
• /
• 2018

This study was conducted to evaluate the quality characteristics. Trehalose was used to manufacture rice bread in two ways: one was to substitute trehalose for sugar by (0, 25, 50, and 75%) trehalose in each sample and the other was to analyze the temporal changes in rice bread on Day 0, on Day 2, and on Day 4. The results concerning the characteristics of specific volumes, water content, water activity, variation in weight and height, physical property test, and sensory test and measurements of the temporal changes are as follows: First, as for variation in specific volumes, rice bread containing trehalose had the content and temporal changes decrease significantly (p<0.001). Second, as for texture, a higher trehalose content led to a slightly lower level of hardness. As for the temporal changes, addition of trehalose is generally effective in decreasing hardness of rice bread. the sample containing trehalose showed an almost similar value. The control group not containing trehalose showed the significantly lowest level of cohesiveness, springiness, Chewiness. Finally, the sensory evaluations revealed that the taste, Flavor, and Sweetness was at a significantly higher level in the group with trehalose substituted for sugar than in the control group. An increase in the trehalose content led to an increase in overall eating quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.11
• /
• pp.1444-1450
• /
• 2007

To prevent the deterioration of jujube wine quality due to commercial heating process for sterilization, hydrostatic pressure (500 MPa, 5 min) or freezing (frozen at $-20^{\circ}C$ for 3 days, followed by thawing at room temperature for 4 hr) treatment was applied. Their microbial count, physicochemical property and sensory quality were investigated in comparison to heat-treated jujube wine ($63^{\circ}C$, 10 min) and commercial wine. Pressure-treated and commercial jujube wine were completely sterilized and heat-treated wine was decreased to <10 CFU/mL while freezing-treated jujube wine was partially sterilized $(30{\sim}60%)$. Hydrostatic pressure and freezing, and heat treatment had no influence on chemical compositions such as pH, acidity, amino acidity, reducing sugar and ethanol content, but significantly induced the changes of instrumental color. While sensory quality of heat-treated jujube wine was significantly deteriorated, reducing sour and burning taste, that of pressure and freezing-treated jujube wine was maintained fresh without decrease in sour and burning taste.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.196-199
• /
• 2003

This experiment was conducted to evaluate the differences in physicochemical properties of soil, grain yield and milling recovery ratio and grain appearance of rice grown in long-term no-till and ordinary till systems. The paddy in no-till rice system was unploughed but straw-mulched for 15 years from 1988 to 2002 at the Experimental Paddy of Gyeongnam Agricultural Research and Extension Services, while the paddy in ordinary till system was ploughed and puddled every crop year, A 5cm organic layer was formed in 11-year no-till rice system, in which exchangeable cation and phosphate were accumulated. In no-till paddy organic matter, bulk density and solid phase of surface soil significantly increased, while pH, exchangeable cation, phosphate, liquid and gaseous phase decreased. Tillage made the very top soil soft, but made deep soil below 5cm significantly hard. In the 1st year of no-till, topsoil showed hard, but in the process of the time in no-till system, the top- and sub-soil showed softer, Yield and yield components of rice showed no differences between till- and no-till rice systems. Milling recovery ratio and grain appearance were not significantly different between no-till and till-rice systems.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.5
• /
• pp.545-566
• /
• 1999

The use of pure titanium and titanium alloys have been increased recently in fixed, removable prosthodontics and implant fields as a framework. But when they were used for superstructures of implant or metal framework of removable prosthesis, welding is necessary to reconnect the fracture site to control the casting distortions. To overcome the difficulties in soldering the titanium due to high oxidation property, much effort have been devoted. In this study, some of mechanical properties were compared between pure titanium and Ti-6Al-4V alloy by using after welding, electron beam welding technique and tungsten arc welding. Mechanical properties such as tensile strength, yield strength, elongation and microhardness were measured. And, in order to compare the effect of welding site and surrounding metal tissue according to the welding condition, SEM photographs were taken and element distribution was observed by Wave Dispersion Spectroscopy. Through analyses of the data, following results were obtained; 1. In items such as tensile strength, yield strength and elongation according to the welding techniques of pure titanium, only tungsten arc welded group showed significant lower value than other groups(P<0.05). 2. In items such as tensile strength and yield strength according to the welding techniques of Ti-6Al-4V alloy, control group and tungsten arc welded group showed significant difference among all the groups(P<0.05). 3. Ti-6Al-4V alloy exhibited significantly greater elongation than control group when the laser welding method and electron beam welding method were used, and elongation showed increasing tendency. 4. Pure titanium specimens exhibited increasing tendency of microhardness regardless of the weld-ing technique applied, and especially tungsten arc welded group demonstrated a great increase of microhardness than parent metal. 5. There was no hardness change in laser welded group and electron beam welded group of Ti-6Al-4V alloy, but in tungsten arc welded group, hardness changed greatly from parent metal to weld seam. 6. Through the metallographic examination and scanning electron microscopy, laser welding caused central fusion and recristallizations were formed and tungsten arc welding caused localized fusion to 0.3-0.7mm from the surface.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.716-723
• /
• 1993

To utilize effectively fish skin wasted from fish processing, a yellowfin sole skin gelatin was prepared by alkaline extraction method and the physico-chemical properties were examined. Conditions for the suitable extraction and decolorization for gelatin preparation from yellowfin sole skin are as follows: the skin is limed with 1.5% calcium hydroxide solution at $5^{\circ}C$ for 5 days, washed throughly with tap water, extracted with 6 volumes of water ($pH5.0{\sim}7.0$) to dehydrated skin for 3 hours at $50^{\circ}C$, and then bleached with 3% activated carbon. Though yellowfin sole skin gelatin was prepared under above condition, the physico-chemical property values such the melting point and gelling point of that were lower than those of pork skin gelatin. Therefore, the purified yellowfin sole skin gelatin requires a suitable modification operation for more a good quality gelatin manufacture.