• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.2
• /
• pp.91-94
• /
• 2001

Glass ceramics composed of (5-X)$Li_2O$ㆍ$XAg_2O$ㆍ36CaOㆍ$20TiO_2$.27$P_2O_5$(X=1 to 5) were prepared by melting process and 2 step heat treatment for nucleation at$610^{\circ}C$ and crystallization at $730^{\circ}C$, Fabricated crystal phases were $LiTi_2(PO_4)_3$(LTP),$AgTi_2(PO_4)_3$(AgTP)와 $\beta-Ca_3(PO_4)$. Antibacterial effects and characterizations of the glass ceramics as $Ag_2$O content were investigated. Staphylococcus aureus and Salmonella typhi were used in this study. Staphylococcus aureus and Salmonella typhi bacteria were removed 5 hours added after glass ceramics.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2315-2319
• /
• 2012

To improve the performance of $LiFePO_4F$, a novel sol-gel process is developed. For comparison, ceramic process is also implemented. From X-ray diffraction results we know that each sample adopts a triclinic $P{\bar{1}}$ space group, and they are isostructural with amblygonite and tavorite. The scanning electron microscope images show that the homogeneous grains with the dimension of 300-500 nm is obtained by the sol-gel process; meanwhile the sample particles obtained by ceramic process are as big as 1000-3000 nm. By galvanostatic tests and at electrochemical impedance spectroscopy method, the sample obtained by sol-gel process presents better electrochemical properties than the one obtained by ceramic process.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.455-456
• /
• 2017

본 논문에서는 리튬 인산철 배터리($LiFePO_4$)의 내부 파라미터 추출 방법으로 전기화학적 기반인 정전류식 간헐적 적정 테크닉(galvanostatic intermittent titration technique;GITT)을 사용하였다. 배터리 관리 시스템(battery management system;BMS) 알고리즘의 기본적으로 들어가는 충방전 저항을 미세 구간으로 나누어 볼 수 있다. SOC(state-of-charge)에 맞는 저항 성분을 찾을 수 있고, 미소 용량 정보를 알아내어 특정 SOC 구간에서의 LFP 배터리 최적 운용 구간을 알 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.93-99
• /
• 2019

The purpose of this study was to investigate the bond strength between PEKK(Polyetherketoneketone) and Sinfony(3M ESPE, Seefeld, Germany) the dental composite resin by proposing the three representative surface treatment methods and evaluate to see if they affect the bond strength between two materials. A total of 30 PEKK($Pekkton^{(R)}$ Ivory, $Cendres+M{\acute{e}}taux$, Bienne, Switzerland) specimens were prepared, embedded in acrylic resin, polished(P 1200 grid) to surface, and each group was divided into 10 specimens. After then, by the surface treatment method, it classified into three groups(n=10) such as Air abrasion group(PN), applying Single Bond Universal(3M ESPE) after Air abrasion(PB), applying OPAQUE(3M ESPE) after Air abrasion(PO). Then, veneering was performed by using Sinfony(3M ESPE, Seefeld, Germany). All completed specimens were allowed to rest in a $37^{\circ}C$ water bath for 24 hours. Shear bond strength of each group was measured and fracture patterns were classified. Statistic analysis was performed with One-way ANOVA followed by post hoc Scheffe tast (p<.05). Statistical analysis was performed using the SPSSWIN 21.0 program. As a result of one-way ANOVA, the average value of PB group was $27.67{\pm}4,18MPa$ and it was shown as the highest bond strength, PN and PO were $20.43{\pm}1.70$ and $19.8{\pm}4.77MPa$ each, and these were relatively low(F=18.4, P<.001), and as the post-test the Scheffe test was conducted and verified (p<.05). After examining the scheffe test, it was showed significant differences as PB>PO, PB>PN(p<.001). Through this study, in order to enhance the bonding force between PEKK and the composite resin, perform the Air abrasion and surface treatment by using Single Bond Universal(3M ESPE) is recommended, and as coMPared with other studies. And it is assumed that the increase of the application time of the Air abrasion affects the increase of the shear bond strength. Thus, further research is required.

• The Korean Journal of Mycology
• /
• v.31 no.2
• /
• pp.77-83
• /
• 2003

For the purpose of utilizing cellulose resources by cellulolytic enzymes of Roseofomes subflexibilis, it's cultural conditions for the production of cellulolytic enzymes in synthetic media were investigated. The results obtained were summarized as follows : The optimum temperature and pH for the enzyme production were $30^{\circ}C$ and pH 4.0, respectively. Among the carbon sources, glucose was good for the production of cellulase. The optimum concentration of saccharose as 1.2%. As a organic nitrogen source, yeast extract was good for the mycelial growth. The optimum concentration of yeast extract as 1.5%. As a inorganic nitrogen source, $NH_{4}H_{2}PO_{4}$ was good for the mycelial growth. The optimum concentration of $NH_{4}H_{2}PO_{4}$ were 1.1%. The mineral salt of $Al_{2}(SO_{4})_{3}$ was effective and the optimum concentration was 0.1 M.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.8
• /
• pp.554-563
• /
• 2013

The purpose of this study is to evaluate the possibility of nutrient release at up and downstream of Kangchun weir, upstream of Yuju and Ipo weir in Namhan River. For this survey, we measured basic characteristics of the sediments (water content, ignition loss, TOC, TP, SRP, TN, phosphorus fractionation) and conducted nutrients release experiments under both aerobic and anaerobic condition. The overlying water from the sediment-water column was analyzed for nutrients (i.e. TP, $PO_4$-P, TN, $NO_3$-N, $NH_3$-N) everyday for 18days. Result of soil texture experiment showed that sediments are Sand. SRP concentration before the release experiment was different with the value after the release experiment. According to this result, we can find that there were more activated release processes in anaerobic condition. $PO_4$-P increased from 1 to 8 days and remained at the maximum value (7~8 days) afterward. The rapidly increase of $PO_4$-P was observed from 1 to 2~3 days whereas the TP continuously increase from 1 to 18 days. The $PO_4$-P release rate calculated by up to 7~8 days data highly correlated with initial SRP concentration with $R^2$=0.8502. $NO_3$-N release rate appears constantly decreasing trend as -5.7~-3.08 $mg/m^2{\cdot}day$, otherwise the $NH_3$-N release rate, by-product of a organic matter decomposition using nitrate as electron acceptor, was 0.57~2.41 $mg/m^2{\cdot}day$. Substantial portion in TN can be induced by organic nitrogen which originated from the tributary passing through non-point pollutant source. Compared with other similar researches, phosphorus and nitrogen release rates obtained in this study can be considered as relatively low values. Since this study targeted the sediments accumulated by one time of flooding season, there are limitation to generalize theses results. Therefore, it is necessary to consistently monitor and investigate the accumulation of nutrients in the sediment for understanding the effect of weir construction on the overlying water quality.

• Journal of Environmental Health Sciences
• /
• v.32 no.1 s.88
• /
• pp.27-35
• /
• 2006

This study was carried out to investigate the removal of nitrogen and phosphorus in municipal sewage depending on existence of biological coated media in BCM reactor. The reactor with biological coated media is the process combining $A_2/O$ process. The removal efficiencies for $COD_{Mn},\; BOD_5,\;SS$, T-N and T-P were $78\%,\;90.5\%,\;92.3\%,\;61.9\%,\;60.2\%$, respectively. The specific nitrification rate$(mgNO_3-N/gMLSS{\cdot}d)$ of Contact aeration basin was 52.2 and the specific denitrification rate$(mgNO_3N/gMLSS{\cdot}d)$ in anoxic basin was 95.1. Also, phosphorus release$(mgPO_4-P/gMLSS{\cdot}d)$ in Anaerobic basin was 71.8 and Phosphorus uptake$(mgPO_4-P/gMLSS{\cdot}d)$ in contact aeration was 27.1.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1995.10a
• /
• pp.89-92
• /
• 1995

순환식 수경재배에서 배양액의 조성이나 농도를 정해놓고 일정기간 공급하면 배양액의 pH와 EC의 변화가 생긴다. 보통 배양액의 공급은 재배개시시에 다량 공급하고 그 이후에는 부족한 양만큼을 공급하게 되는데, 시작배양액과 추가배양액의 조성은 같아도 이온의 총량은 다르다. 때문에 재배기간중에 pH의 변화양상이 다르게 나타나는 것이다. 이러한 현상을 피하기 위하여 이온의 총량을 기초로 하여 추가배양액의 이온조성을 조정하여 공급하므로써 배양액의 pH를 안정하게 유지할 수 있을 것으로 추측한다. (중략)

• Journal of the Korean Ceramic Society
• /
• v.55 no.5
• /
• pp.480-491
• /
• 2018

Calcium phosphates (CaP) were prepared by a wet chemical method. Micro-crystalline dicalcium phosphate (DCPD) was precipitated at $37^{\circ}C$ and pH 5.0 using $Ca(OH)_2$ and $H_3PO_4$. The precipitated DCPD solution was kept at $37^{\circ}C$ for 96 h. Artificial bone cement was composed of DCPD, $Ca(H_2PO_4)_2{\cdot}H_2O$ (MCPM), and $CaSO_4{\cdot}1/2H_2O$, $H_2O$ and aqueous poly-phosphoric acid solution. The wet prepared CaP powder was used as a matrix for the bone cement recipe. With the addition of aqueous poly-phosphoric acid, the cement hardening reaction was started and the CaP bone cement blocks were fabricated for the mechanical strength measurement. For the tested blocks, the mechanical strength was measured using a universal testing machine, and the microstructure phase analysis was done by field emission scanning electron microscopy and X-ray diffraction. The cement hardening reaction occurred through the decomposition and recrystallization of MCPM and $CaSO_4{\cdot}1/2H_2O$ added on the surface of the wet prepared CaP, and this resulted in grain growth in the bone cement block.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.43-53
• /
• 2023

This batch experiment evaluated the impacts of major plant nutrient releases by applying the modified Hyperbola model on the leachates and N₂O emissions from incorporated rice hull biochar with organic fertilizer materials. The treatments consisted of the control as incorporated with organic fertilizer materials, the incorporated rice hull biochar with organic fertilizer materials, and the incorporated plasma-activated rice hull biochar with organic fertilizer materials under redox conditions. The results indicated that the maximum release amount of NH₄-N was 3486.3 mg L^-1 in the control, and their reduction rates of NH₄-N, NO₃-N, PO₄-P, and K were 8.0%, 17.5% 44.3.0% and 8.7%, respectively, relative to the control. In the control, the highest soluble amount of PO₄-P was 681.0 mg L^-1. The estimations for accumulated NH₄-N, NO₃-N, PO₄-P, and K-releases in all the treatments were significantly (p<0.01) fitted with a modified Hyperbola model. For greenhouse gas emissions, the lowest cumulative N₂O was 340.4 mg kg^-1 in the soil incorporated with plasma-activated rice hull biochar, and the reduction rates were 27.8% and 86.4% in the rice hull biochar and plasma-activated rice hull biochar treatments, respectively, compared to the control. Therefore, it concluded that the incorporated rice hull biochar can be especially useful for controlling PO₄-P release and N₂O emissions for bio-fertilizer applications.