• 한국전기전자재료학회논문지
• /
• 제20권1호
• /
• pp.47-52
• /
• 2007

Organic field-effect transistors (OFETS) are of interest for use in widely area electronic applications. We fabricated a copper phthalocyanine (CuPc) based field-effect transistor with varying channel length. The CuPc FET device was made a top-contact type and the channel length was a $100\;{\mu}m,\;50\;{\mu}m,\;40\;{\mu}m,\;and\;30\;{\mu}m$ and the channel width was a fixed at 3 mm. We observed a typical current-voltage (I-V) characteristics in CuPc FET with varying channel length (L) and we calculated the effective mobility. Also, we measured a capacitance-voltage (C-V) by applied bias voltage with varying frequency at 43, 100, 1000 Hz.

• 한국통신학회논문지
• /
• 제15권3호
• /
• pp.187-196
• /
• 1990

이 연구는 공중망에 연결된 PC들 사이의 파일전송프로토콜의 설계 및 구현에 관한 것이다. 3B20S/UNIX을 호스트컴퓨터로 하여 공중망에 접속된 MS-DOS하의 PC들 사이에 파일처리시스템을 구현한 것으로 이때의 프로토콜로는 파일전송을 지원하는 Kermit 프로토콜에 윈도우기능및 파일관련 기능을 갖도록 확장한 것이다. 사용자들은 PC로부터 호스트컴퓨터로 데이터를 송신하고 호스트컴퓨터의 파일을 수신, 조회, 삭제할 수 있게 된다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.86-91
• /
• 2006

This study is aimed to provide a guide for PC use space in apartment. To achieve this, a design about PC use space which was considered adequate location, area, form was suggested. As methods of the study, survey research method and case study. The survey was taken by five hundred-eighty-nine people who used PCs in apartment from May 2005 to July 2005 in Je-Ju province for an analysis of data. The results of the survey were showed PC use space situation and furnitures layout patterns. The case was classified by unit plans of size, and it showed design example of PC use space. In case of the 20s pyeong(about 3.30 square meters) type, PC use space was located in dead-space in the residence with minimum scale, because of 20s pyeong types are smaller than the other types. In case of the 30s pyeong type, PC use space which was divided with a partition panel was located in the livingroom expanding the room space to the balcony. In case of the 40s pyeong type, PC use space was located in the room of sons or daughters which was arranged with other furniture. The adequate area of PC use space is 1.4$^{\sim}$2.2 square meters, and it should take into account furniture size and human active sphere. And PC use space of form should consider traffic line, personal space and privacy. Besides it is required of ergonomic design in chair, table in its scale. And it is necessary development of systematic furniture for PC use space.

• 콘크리트학회논문집
• /
• 제20권3호
• /
• pp.335-343
• /
• 2008

본 연구는 프리캐스트 콘크리트 모멘트 골조 시스템의 시공 성능 향상과 접합부 내진성능 향상을 위하여 새로운 개념의 PC 기둥 부재와 시공 공정을 개발하였다. 이 PC 기둥은 원심력으로 제조되어 내부에 공간이 비워있는 중공관 PC 부재로서, 이 기둥을 활용할 경우, 중공관을 통하여 현장타설 콘크리트와 동일한 일체성을 확보할 수 있다. 본 연구는 제안된 PC 기둥 접합부의 내진성능을 평가하기 위하여 반복가력 시험을 수행하였다. 실험체는 기둥 주철근의 연속성을 확보하기 위하여 기계적 이음과 겹침이음을 활용한 2가지 이음 방법을 적용하였으며, PC 기둥의 띠철근 배근 형태를 고려하여 실물 크기의 4개 실험체를 계획 실험하였다. 반복 횡력 시험 결과, 제안된 HPCC 기둥을 활용할 경우, 현장타설 RC 시스템의 접합부 내진성능을 충분히 확보할 수 있는 것으로 나타났다.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 2010년도 춘계국제학술대회
• /
• pp.33-41
• /
• 2010

Recently the number of IT equipment have increased. It consumes large amounts of energy and is emissions of greenhouse gases. Co2 emissions with the PC and the monitor has the highest percentage to 39% more than other IT equipment. In addition, Plan for your PC's power management and technology development is being pursued in developed countries. To reduce energy costs of organizations with large numbers of the PC and to cut down on Co2 emissions, the energy load control technology of ACPI standards-based PC IS suggested. AMI-based PC power-management system was constructed, Approximately 20% of operating a result of the test power consumption was reduced. Looking at the case of the United States, PC monitors from the University of Wisconsin-Oshkosh was Sleep mode. As a result, the monitor on a, $ 20 for a year reduced energy costs. In GE(General Electronic), Approximately 75,000 PC's power setting time was Monitor Off :15 minutes/ Hard Drives Off 30 minutes/ System Standby 30 minutes/ Hibernation mode 2 hours. 1 year, electric bill was $ 2.5 million savings and 3 years electric bill was $ 6.5 million savings. Measuring energy usage data, using the measured data, electric energy management technology is not. Platform development to measure energy usage for Individual energy-consuming equipment is urgently required.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.744-746
• /
• 2008

Organic photovoltaic effects were studied in a device structure of ITO/CuPc/Al and ITO/CuPc/$C_{60}$/BCP/Al. A thickness of CuPc layer was varied from 10 nm to 50 nm, we have obtained that the optimum CuPc layer thickness is around 40 nm from the analysis of the current density-voltage characteristics in CuPc single layer photovoltaic cell. From the thickness-dependent photovoltaic effects in CuPc/$Cu_{60}$ heterojunction devices, higher power conversion efficiency was obtained in ITO/20nm CuPc/40nm $C_{60}$/Al, which has a thickness ratio (CuPc:$C_{60}$) of 1:2 rather than 1:1 or 1:3. Light intensity on the device was measured by calibrated Si-photodiode and radiometer/photometer of International Light Inc(IL14004).

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.612-614
• /
• 2008

Organic photovoltaic effects were studied in a device structure of ITO/CuPc/Al and ITO/CuPc/$C_{60}$/BCP/Al. A thickness of CuPc layer was varied from 10nm to 50nm, we have obtained that the optimum CuPc layer thickness is around 40nm from the analysis of the current density-voltage characteristics in CuPc single layer photovoltaic cell. From the thickness-dependent photovoltaic effects in CuPc/$C_{60}$ heterojunction devices, higher power conversion efficiency was obtained in ITO/20nm CuPc/40nm $C_{60}$/Al, which has a thickness ratio (CuPc:$C_{60}$) of 1:2 rather than 1:1 or 1:3. Light intensity on the device was measured by calibrated Si-photodiode and radiometer/photometer of International Light Inc(IL14004).

• 한국대기환경학회지
• /
• 제20권4호
• /
• pp.515-521
• /
• 2004

The catalytic oxidation of volatile organic compounds (methanol. acetaldehyde) has been characterized using the copper phthalocyanine catalyst in a fixed bed flow reactor under atmospheric pressure. The catalytic activity for pretreatment conditions was examined by this reaction system. The catalytic activity was ordered as follows: metal free-PC＜Cu ($\alpha$)-PC＜Cu ($\beta$)-PC The formaldehyde, carbon monoxide as a partial oxidation product of methanol and acetaldehyde over Cu ($\alpha$)-PC catalyst were detected and the conversions of methanol and acetaldehyde were accomplished above 95% over Cu ($\alpha$) -PC, Cu ($\beta$) - PC catalyst at 35$0^{\circ}C$. The pretreated metal free -PC, Cu($\alpha$)-PC, Cu($\beta$)-PC catalysts have been characterised by TGA, EA and XRD analysis. The catalytic activity pretreated with air and $CH_3$OH mixture (P-4) or air only (P-5) was very excellent. XRD and EA results showed that Cu($\alpha$)-PC, Cu($\beta$)-PC were destroyed an(1 new metal oxide such as CuO were formed.

• 한국식품위생안전성학회지
• /
• 제35권5호
• /
• pp.430-437
• /
• 2020

본 연구는 전자코와 전자혀 시스템을 이용한 15가지 국내 식품에 대한 맛과 향에 대한 기본 접근 연구를 진행하였다. 먼저 전자혀 시스템을 이용한 샘플의 맛 성분에 대해 상대적인 센서 강도를 제시하였다. 신맛으로 대표되는 SRS 센서에서는 소고기배추국이 가장 높은 9.0을 나타내었고, 미역국에서 가장 낮은 3.7을 나타내었다. 짠맛으로 대표되는 STS 센서는 오징어국에서 가장 높은 8.2를 나타내었고, 소고기배추국이 가장 낮은 1.9를 나타내었다. 감칠맛으로 확인되는 UMS 센서의 경우 소고기배추국이 가장 높은 10.1을 보였고, 달걀국이 가장 낮은 3.3을 나타내었다. 단맛에 관여하는 SWS 센서에서는 비교적 큰차이를 보이지 않았는데, 시금치된장국이 가장 높은 7.3을 나타내었고, 달걀국이 가장 낮은 4.6을 나타내었다. 마지막으로 쓴맛에 기여하는 BRS 센서에서는 시래기 된장국이 가장 높은 7.8을 나타내었으며, 햄김치찌개에서 가장 낮은 4.4를 보였다. 주성분 분석을 통해 5가지 맛 성분과 15가지 샘플에 대한 패턴을 확인한 결과 PC1에서 56.21%의 variance를 확인하였고, PC2에서 25.23%의 variance를 확인할 수 있었다. 각 맛 성분의 경우 SRS 센서의 경우 PC1과 PC2의 factor loading의 경우 -0.95와 -0.20을 나타내었고, STS 센서의 경우 PC1과 PC2의 factor loading의 값이 0.96과 0.14, UMS 센서의 경우 PC1과 PC2의 factor loading의 값이 -0.94와 0.22, SWS 센서의 경우 PC1과 PC2의 factor loading의 값이 0.08과, 0.89, 그리고 BRS 센서의 경우 PC1과 PC2의 factor loading의 값이 0.32와 -0.60을 각각 나타내었다. 군집분석을 통해 확인된 샘플간의 유사도는 크게 4개의 cluster를 확인할 수 있었다. 15가지 샘플에서 확인된 향기성분은 총 25가지 성분이 확인되었고, 모든 샘플에서 상대적으로 가장 높은 함량을 보이는 향기성분은 ethanol과 2-methylthiophene으로 확인되었다. 주성분 분석을 통해 휘발성 향기 성분과 15가지 샘플에 대한 패턴을 확인한 결과 PC1에서 28.54%의 variance를 확인하였고, PC2에서 20.80%의 variance를 확인할 수 있었다. 군집분석의 경우 크게 3개의 cluster로 분류되는 것을 확인할 수 있었다. 이러한 맛과 향에 대한 연구를 통해서 국내 식품에 대한 표준 자료로써의 활용이 가능할 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제20권6호
• /
• pp.701-704
• /
• 1999

Metallophthalocyanines [PcM, Pc: phthalocyanine, M: Fe 2+ , Co 2+ ] were reacted with α-isocyanonaphthalene( α-in) and α-isocyanoanthracene (α-ia) to form monomeric complexes. The synthesis and coordination behaviour of the isocyanides as a ligand (L) are discussed. All the products were characterized by spectroscopic methods and instrumental analysis. The electrical conductivities of these complexes, which were not treated with dopant, were attributed to the metal-ligand electron delocalization in the PcML2 complexes. The complexes have an enlarged macrocycle where the π-electron back donating ability of PcM is stronger than the σ-electron coordinating ability of the isonitrile ligands. Their electrical conductivities were measured as σRT = 2.1×10 -9 ~3×10 -10 S/cm. Also thermal stability was investigated in this study.