• 한국식품영양학회지
• /
• 제30권5호
• /
• pp.1025-1034
• /
• 2017

As the consumption of wheat has increased recently, the number of people who have digestive problems resulting from gluten in wheat has also increased. Teff has an attractive nutritional profile, as it not only gluten-free but also high in dietary fiber, protein, iron, and calcium. Seven samples were prepared for this study. The quality characteristics of gluten-free noodles were evaluated based on pH, salinity, water absorption, turbidity, color, texture properties, tensile strength, and SEM. The pH value was the highest in TF100 with a pH of 6.66 and the lowest in the control with a pH of 6.42. Salinity showed no significant difference among all samples, and it ranged from 0.02~0.04% (p<0.05). Water absorption was the highest in TFX with a value of 66.11%, and the lowest in the control with a value of 44.81%. Turbidity showed no significant difference among all samples, and it ranged from 0.14~0.21 O.D. (p<0.05). While the lightness and yellowness values decreased with an increase in teff flour content, the redness value tended to decrease. The color difference value was the highest in the sample group without gluten. Based on the texture profile analysis, the hardness was highest in the control with a value of 46.74 N and lowest in TF100 with a value of 18.34 N. The springiness showed no significant difference among all samples. The cohesiveness was highest in the control with a value of 0.92 N. The chewiness decreased with an increase in teff flour content. Although the control with gluten had the highest tensile strength at $3.42kg/cm^2$, TFX had considerable tensile strength at $2.30kg/cm^2$. This study demonstrated the processability of gluten-free noodles using teff flour.

• Animal cells and systems
• /
• 제2권1호
• /
• pp.49-53
• /
• 1998

The winter-resident Korean bats, Murina leucogaster ognevi, show a circadian cycle of thermoregulation and locomotion in summer, as do other bat species in temperate regions. They are most active between dusk and dawn with body temperature (Tb) of 35-4OC, and are usually torpid in their roost sites for the rest of day with their Tb close to ambient temperature (Ta) of around 15C. The present study was conducted to determine thermogenic and thermolabile properties of the heterothermic bats that would influence their daily feeding activities and ultimately, their energy conservation strategy. Testing on active male Murina, resting metabolic rate (RMR, gauged by oxygen consumption rate) at the lower limit of thermoneutral zone (31C) was 2.0 L kq-1 h-1. The regression slope of RMR below the thermoneutral zone (an index of metabolic thermal sensitivity) was -0.38 L $kg^{-l} h^{-1} C^{-1}$. The metabolic rate at the roost Ta (15C) was 4.5 times the lowest RMR in the active state but becomes nearly zero in the torpid state. This implies that by being torpid during daytime (between dawn and dusk), the individual bats would save about 4.7 kcal each day in mid-summer. Interspecific comparisons of thermal metabolic response over a mass scale suggest that the smaller bats show a relatively higher metabolic rate in thermoneutral zone and a greater thermal sensitivity of metabolism, which follows the general principle seen in homeothermic metabolism. Thermolabile features in metabolic responses seem to be fairly common for these bats in conditions other than a fully active state. Types of thermolabile responses and their energetic significance are discussed.

• 생약학회지
• /
• 제50권4호
• /
• pp.260-271
• /
• 2019

This study aimed to evaluate the safety of Oplopanax elatus (Nakai) Nakai hydrothermal extract powder. It was conducted using male and female Sprague-Dawley (SD) rats. The test group was established with dose of 500 (low-dosage group), 1,000 (medium- dosage group), and 2,000 (high- dosage group) mg/day. These are investigated that number of dead animals, general symptoms, weight changes, food consumption, ophthalmological examination, urinalysis, urine volume, hematological values, plasma coagulation time values, serum biochemical values, absolute organ weight, relative organ weight and histopathological finding during the experiment. As a result of the above, toxicological changes were not observed. Therefore, the non-toxic content of Oplopanax elatus (Nakai) Nakai hydrothermal extract powder is determined to be 2,000 mg/kg/day, and target organ was not observed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.211-214
• /
• 2005

Recently, Deterioration of the concrete sewer concrete structures by biochemical corrosion has been issued and a development of the inhibition system of corrosion that has been demanded. The sulfuric acid may react with the hardened cement paste and originate expansive products which can induce swelling and breakless of concrete. Also, a sulphuric acid reacts with calcium hydroxide to from $CaSO_4\;\cdot\;2H_2O$. This reaction accounts for consumption of the calcium hydroxide present in hardened cement paste. In this study, To present from biochemical corrosion of the sewer repair mortar that was spread with liquefied antibiotic and then its experimental properties were experimentally investigated and to estimate the effect of absorbed condition of restorative mortar, the number of coating times and coating contents with antibiotic on the durability properties of restorative mortar spread with antibiotics. Also, testing items such as carbonation depth, choloride ion penetration depth and chemical resistance was tested to estimate the durability properties in third study. In results, the novellus bacillus inhabiting in sewer concrete structures was restrained by antibiotics developed in this study. And carbonation depth, choloride ion penetration depth and chemical resistance of restorative mortar spread with antibiotics was superior to that of plain mortar.

• Environmental Engineering Research
• /
• 제16권3호
• /
• pp.159-164
• /
• 2011

This study examined the emission characteristics of impure gas-like hydrogen sulfide and siloxane contained in landfill gas (LFG) and investigated the effect of impure gas on LFG utility facilities. As a result of an LFG component analysis from eight landfills in the same environment, hydrogen sulfide averaged 436 ppmv (22-1,211 ppmv), and the concentration of total siloxane averaged 7.95 mg/$m^3$ (1.85-21.18 mg/$m^3$). In case of siloxane concentration by component, the ratio of D4 (average 3.79 mg/$m^3$) and D5 (average 2.64 mg/$m^3$) indicated the highest level. Different kinds of scales were found on the gas air heater (GAH) and inside the boiler. The major component of scale from the GAH was $Fe_2O_3$ of 38.5%, and it was caused by hydrogen sulfide. Other scale was found on the bottom and the wall of the boiler and the scale was silicon dioxide of 92.8% and 98.9%. The silicon dioxide scale was caused by combustion of siloxane. As a result of a scanning electron microscopy analysis, the structure of the silicon dioxide scale from the boiler was an immediate filamentous type. Consequently, as silicon dioxide scale is bulky, such bad effects were worsening, as an interruption in heat conduction, increase in fuel consumption, damage to the boiler by overheating, and clogged emission pipeline could occur in LFG utility facilities.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.61-64
• /
• 2002

We have optimally designed and implemented by a monolithic microwave integrated circuit(MMIC) the low noise amplifier(LNA) of 5.8GHz band composed of receiver front-end(RFE) in a on-board equipment system for dedicated short range communication using a depletion-mode GaAs MESFET. The LNA is provided with two active devices, matching circuits, and two drain bias circuits. Operating at a single supply of 3V and a consumption current of 18㎃, The gain at center frequency 5.8GHz is 13.4dB, Noise figure(NF) is 1.94dB, Input 3rd order intercept point(lIPS) is 3dBm, and Input return loss(5$_{11}$) and Output return loss(S$_{22}$) is -l8dB and -13.3dB, respectively. The circuit size is 1.2$\times$O.7$\textrm{mm}^2$.EX>.>.

• 한국의류학회지
• /
• 제35권8호
• /
• pp.959-967
• /
• 2011

An importance of design that considers the characteristics of fashion that plays a role of a medium that communicates with customers (and is not simply clothes or products by adding the particular culture factors of a local country to the development of glocalism) is discussed. While the cultural consumption becomes a core key word, the survey of customers is conducted to develop a party-wear design that applies a Korean image suitable for the party culture industry magnified by the young generation's cultural trends. Based on it, we suggest a party-wear design that applies Dancheong's lotus and derive the followed results. The first, one-piece and accessory coordination was the highest by 49.3% for the party-wear coordination and design. In addition, Dancheong was the highest by 16.5% for the traditional pattern (thought to be representative for Korean image). Among the traditional patterns, for a pattern suitable for party-wear, the case applying flowers such as the Japanese apricot flower, lotus flower, and peony was the highest. The second, among the several patterns used Dancheong that was represented by a Korean image of a lotus flower pattern because of the characteristics of strong vitality and blooming in dirty mud was often used for the pattern of clothes. The third, under the motive of the results of the survey and Dancheong's lotus flower pattern, we developed 2 methods of one piece and accessory coordination, 2 methods of top and skirt coordination, and 1 method of jacket and one piece coordination as the party-wear.

• 한국가정과교육학회지
• /
• 제4권1호
• /
• pp.43-55
• /
• 1992

The purpose of this reasearch is to supply the basic data to improve Home Economics curriculum. This research was intended for 190 home economics teachers who are teaching in Kwang-Ju and chun-nam. The results are summarized as follows； 1. Among the objects of Home economics, the most important objects were to make students understand the significance of family life and development of family numbers. It requires 4 or 5 hours a week to learn these objects. 2. The amount of curriculum was immense and the level of curriculum was higher than students’level. More intencifying field are in this order； sex education, propriety education, consumption life, occupation, and computer education. 3. In home economics curriculum, the main stress was laid upon the application of action and learning content was focused on the matter set in the examination. 4. Theory and practical training classes were usually in the ratio of 7：3 and 8：2 in the current school classes. Ideal training classes are in the ration of 4：6, 5：5, 6：4, which showed that much weight was given to the practical exercises. 5. In practing subject matter, students tended to practice only main subject matter. The reason was primarily due to the lacks of equipments and faccilities, the limitation of training time for enterance examination and budgetary deficit. 6. Application of resorces was in the order of files, realia, samples, hanging chart, O.H.P and V.T.R. 7. The method of evaluation was mostly composed of paper and pens and practical evaluation when the practical evaluation was carrient out, in the case of necessity the standard of evaluation was made out.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권12호
• /
• pp.1756-1760
• /
• 2016

Estimation of feed intake (FI) for individual animals within a pen is needed in situations where more than one animal share a feeder during feeding trials. A partitioning method (PM) was previously published as a model to estimate the individual FI (IFI). Briefly, the IFI of a pig within the pen was calculated by partitioning IFI into IFI for maintenance ($IFI_m$) and IFI for growth. In the PM, $IFI_m$ is determined based on the metabolic body weight (BW), which is calculated using the coefficient of 106 and exponent of 0.75. Two simulation studies were conducted to test the hypothesis that the use of different coefficients and exponents for metabolic BW to calculate $IFI_m$ improves the accuracy of the estimates of IFI for pigs, and that PM is applied to pigs fed in group-housing systems. The accuracy of prediction represented by difference between actual and estimated IFI was compared using PM, ratio (RM), or averaging method (AM). In simulation studies 1 and 2, the PM estimated IFI better than the AM and RM during most of the periods (p<0.05). The use of 0.60 as the exponent and the coefficient of 197 to calculate metabolic BW did not improve the accuracy of the IFI estimates in both simulation studies 1 and 2. The results imply that the use of $197kcal{\times}kg\;BW^{0.60}$ as metabolizable energy for maintenance in PM does not improve the accuracy of IFI estimations compared with the use of $106kcal{\times}kg\;BW^{0.75}$ and that the PM estimates the IFI of pigs with greater accuracy compared with the averaging or ratio methods in group-housing systems.

• Journal of Construction Engineering and Project Management
• /
• 제2권4호
• /
• pp.20-24
• /
• 2012

Construction while being an economic activity that provides facilities and infrastructure, it is beneficial to man in some aspects and detrimental in others. There have been environmental concerns related to construction activities globally which mainly focus on atmospheric emissions, depletion of natural resources and energy issues. This study was carried out to assess the impacts of construction activities on the environment in Iganga Municipality and to propose measures for their mitigation. The methodology included: review of relevant literature, observations of the general environmental effects of construction activities, focus groups and a survey conducted among construction industry role players to determine their perceptions and opinions regarding environmental impact of construction activities. The collected data was presented in tabular form and analysed by description of responses to questions. The study revealed that forests were the most greatly degraded due to high demand of timber for construction followed by wetlands degradation. The findings of this study will be useful to architects, designers and builders in order to carefully design buildings and other infrastructure that are environmentally friendly and sustainable. Construction materials and their mode of acquisition are harmful threats to the environment. There is need to reduce the consumption of these materials through recycling and reusing wastes to reduce on waste generation, use of virgin materials and the subsequent waste of energy used in new material production.