• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.345-345
• /
• 2001

This paper was studied on the characteristics of galvanic corrosion and its protection on heat exchanger tube plate in the sea water. In this paper, behavior of pitting corrosion of Ni-al bronze connected with Ti tube was measured af flow velocity of 0 m/s and 2.4 m/s. To protect galvanic corrosion, the protection characteristics of Ni-Al bronze connected with Ti tube by Zn-base alloys galvanic anode and hexagonal nylon insert was investigated. Main results obtained asre al follows: 1) The galvanic corrosion of Ni-Al bronze connected with Ti-tube is more active than single Ni-al bronze. 2) As the circuit resistance increase under the cathodic protection employing Zn-base alloys galvanic anode, Ni-al bronze connected with Ti tube is cathodically unpolarized. 3) The corrosion of Ni-Al bronze connected with Ti tube by nylon insert controls approximately 73% than not nylon insert.

• 한국분말재료학회지
• /
• 제6권1호
• /
• pp.111-118
• /
• 1999

Ni(Fe)Al powders containing a homogeneous distribution of the in-situ formed AIN and $Al_2O_3$ dispersoids have been produced by mechanical alloying process in a controlled atmosphere using high energy attrition mill. The powders have been successfully consolidated by hot extrusion process. The phase information investigated by TEM and XRD analysis reveals that Fe can be soluble up to 20% to the NiAl phase ($\beta$) at room temperature after MA process. Subsequent thermomechanical treatment under specific condition has been tried to induce secondary recrystallization (SRx) to improve high temperature properties, however, the clear evidence of SRx was not obtained in this material. Mechanical properties in term of strength at room temperature as well as at high temperatures have been improved by the addition pf AIN, and the room temperature ductility has been shown to be improved after heat treatment, presumably due to the precipitation of second phase of $\alpha$ in this material.

• Korean Chemical Engineering Research
• /
• 제48권6호
• /
• pp.776-783
• /
• 2010

수소생산을 위한 메탄의 부분산화용 촉매로 알루미나에 담지된 코발트와 니켈 촉매를 함침법으로 제조하였다. 메탄의 부분산화반응을 위한 이들 촉매의 반응활성은1기압, $CH_4/O_2=2.0$과 $450{\sim}650^{\circ}C$의 온도영역에서 조사하였다. 담지량이 다른 코발트촉매와 니켈촉매의 반응활성을 비교하고 코발트촉매에 니켈을 첨가한 이성분금속 촉매의 반응활성을 조사하였다. 그리고 코발트촉매와 니켈촉매에 첨가된 Ce와 La의 첨가효과를 조사하였다. 이들 촉매의 특성은 XRD와 SEM/EDX로 분석하였다. 코발트와 니켈은 10 wt%의 담지량이 적절한 것으로 나타났다. 이들 10 wt% 담지 코발트와 니켈촉매는 열역학적 평형값에 가까운 메탄의 전환율과 CO의 선택성을 나타내었으나 $H_2$의 선택성은 평형값보다 다소 낮게 나타났다. 코발트촉매에 니켈을 첨가한 이성분금속 촉매에서 $H_2$의 선택성은 증가하였으나 전환율을 고려하면 니켈을 첨가한 이점은 나타나지 않았다. 코발트촉매에서는 Ce의 첨가와 니켈촉매에서는La의 첨가로 메탄의 전환율과 수소의 선택성을 높일 수 있었다.

• 한국분말재료학회지
• /
• 제30권1호
• /
• pp.41-46
• /
• 2023

In this study, an Al₈₂Ni₇Co₃Y₈ (at%) bulk metallic glass is fabricated using gas-atomized Al₈₂Ni₇Co₃Y₈ metallic glass powder and subsequent spark plasma sintering (SPS). The effect of powder size on the consolidation of bulk metallic glass is considered by dividing it into 5 ㎛ or less and 20-45 ㎛. The sintered Al₈₂Ni₇Co₃Y₈ bulk metallic glasses exhibit crystallization behavior and crystallization enthalpy similar to those of the Al₈₂Ni₇Co₃Y₈ powder with 5 ㎛ or less and it is confirmed that no crystallization occurred during the sintering process. From these results, we conclude that the Z-position-controlled spark plasma sintering process, using superplastic deformation by viscous flow in the supercooled liquid-phase region of amorphous powder, is an effective process for manufacturing bulk metallic glass.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2001년도 연료전지심포지움 2001논문집
• /
• pp.231-236
• /
• 2001

용융탄산염 연료전지용 anode의 creep 현상을 개선하기 위해 $Ni-5wt.\%Al$ green sheet를 사용하여 다양한 소결조건을 적용, $Al_2O_3$를 형성시킨 전극을 제조하고 그 $Al_2O_3$의 형태에 따른 creep 특성에 대해 연구하였다. 소결은 각각 환원분위기, 완전산화-환원분위기, 부분 산화-환원분위기의 서로 다른 분위기에서 진행하였는데, 부분산화-환원분위기로 소결한 경우 Ni-Al 고용체 네트워크를 깨드리지 않고 $A1_2O_3$를 미세한 입자형태로 분산시킬 수 있었다. 그리고, 상기의 방법으로 제조된 anode를 $650^{\circ}C$에서 100psi로 가압하면서 creep test를 실시한 결과 약 $2.3\%$의 변형율을 나타내었다.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.315-323
• /
• 2021

In general, surface treatments of electroless Ni-P coating are extensively applied in the industry due to their excellent properties for considerable wear resistance, hardness, corrosion resistance. This study aims to determine the effect of ultrasonic conditions on the morphology, alumina content, roughness, hardness, and corrosion resistance of electroless Ni-P-Al₂O₃ composite coatings. The characteristics were analyzed by Energy-dispersive X-ray spectroscopy (EDX), x-ray diffractions (XRD), and atomic force microscopy (AFM), etc. In this study, the effect of ultrasonic condition uniformly distributed alumina within Ni-P solution resulting in a smoother surface, lower surface roughness. Furthermore, the corrosion resistance behavior of the coating was analyzed using tafel polarization curves in a 3.5 wt.% NaCl solution at 25 ℃. Under ultrasonic, Al₂O₃ content in Ni-P composite solution increased from 0.5 to 5.0 g/L, Al₂O₃ content at 3.0 g/L was showed a significantly enhanced corrosion resistance. These results suggested that ultrasonic condition was an effective method to improve the properties of the composite coating.

• 한국응용과학기술학회지
• /
• 제30권3호
• /
• pp.423-430
• /
• 2013

Carbon coils could be synthesized using $C_2H_2/H_2$ as source gases and $SF_6$ as an incorporated additive gas under thermal chemical vapor deposition (CVD) system. Prior to the carbon coils deposition reaction, two kinds of samples having different combination of Ni catalyst and substrate were employed, namely, a commercially-made $Al_2O_3$ ceramic boat with Ni powders and a commercially-made $Al_2O_3$ substrate with Ni layer. By using a commercially-made $Al_2O_3$ ceramic boat, the synthesis of carbon coils could be enhanced as much as 10 times higher than that of $Al_2O_3$ substrate. Furthermore, the dominant formation of the microsized carbon coils could be obtained by using $Al_2O_3$ ceramic boat. The surface roughness of the supporting substrate of $Al_2O_3$ ceramic boat was understood to be associated with the large scale synthesis of carbon coils as well as the dominant formation of the larger-sized, namely the microsized carbon coils.

• 청정기술
• /
• 제25권1호
• /
• pp.81-90
• /
• 2019

프로페인($C_3H_8$)의 건식 개질($CO_2$ 개질)을 통한 합성 가스($H_2$와 CO 혼합물) 제조를 위해 $Ni-CeO_2/{\gamma}-Al_2O_3$ 촉매가 충진된 유전체 장벽 방전 플라즈마 반응기를 사용하였다. 열 또는 플라즈마에 의해 환원된 $Ni-CeO_2/{\gamma}-Al_2O_3$ 촉매를 사용하여 $C_3H_8/CO_2$ 비율 1/3, 총 유량 $300mL\;min^{-1}$에서 플라즈마-촉매 건식 개질을 수행하였다. 건식 개질에 대한 촉매 활성은 온도범위 $500{\sim}600^{\circ}C$에서 평가되었다. $Ni-CeO_2/{\gamma}-Al_2O_3$ 촉매 제조를 위해 전구물질 수용액(질산니켈, 질산세륨)으로 함침된 ${\gamma}-Al_2O_3$를 공기 분위기에서 소성시킨 후, $H_2/Ar$ 분위기에서 환원시켰다. 촉매 특성 조사에는 X-선 회절분석기(XRD), 투과전자현미경(TEM), 전계 방출 주사전자현미경(FE-SEM), 승온 탈착($H_2-TPD$, $CO_2-TPD$) 및 라만 분광기가 이용되었다. 열로 환원된 촉매와 비교하면 플라즈마 방전하에서 환원된 $Ni-CeO_2/{\gamma}-Al_2O_3$ 촉매가 개질 반응을 통한 합성 가스 생산에서 보다 우수한 촉매 활성을 나타내었다. 또한, 플라즈마로 환원된 $Ni-CeO_2/{\gamma}-Al_2O_3$가 개질 반응의 문제점인 탄소퇴적 관점에서 장기 촉매 안정성을 보여주었다.

• 에너지공학
• /
• 제8권2호
• /
• pp.256-264
• /
• 1999

본 연구에서는 메탄의 부분산화반응에 미치는 base metal 의 영향을 살펴보기 위하여 6~l2wt%의 Mn, Cu, V, Co, Cr 그리고 Ba 등이 2 wt% Pt, 70 wt% Alumina, 28 wt% Ceria and Zirconia 와 함께 cordierite (2MgO.2Al$_2$O$_3$.5SiO$_2$)에 담지된 Pt-B/cordierite 촉매(B: base metal)를 사용하여 메탄의 부분산화반응 실험을 수행하였다. 메탄의 부분산화반응에 대한 활성은 Ba, Co그리고 Cr 담지 촉매는 Ni담지 촉매와 유사하게 Mn, Cu, V을 담지 했을 때 보다 우수한 것으로 나타났으나, 코크 생성에 대한 활성도 큰 것으로 나타났다. 또한 5wt% Ni/Al$_2$O$_3$촉매를 이용한 메탄의 부분산화반응 실험 후의 촉매에 대한 XRD 분석결과 Ni은 3가지 형태의 상으로 존재하는 것을 확인할 수 있었으며, 촉매층 전단에서는 주로 NiAl$_2$O$_4$와 NiO 형태로 존재하여 메탄의 산화반응이 일어나며, 그리고 촉매층 후단에서는 환원상태의 Ni로 존재는 것으로 보아 개질반응이 일어나는 것을 알 수 있었다.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.631-635
• /
• 2012

Nickel oxide was doped with a wide range of concentrations (mol%) of Aluminum (Al) by solvothermal synthesis; single-phased nano powder of nickel oxide was generated after calcination at$900^{\circ}C$. When the concentration of Al dopant was increased, the reduced intensity was confirmed through XRD analysis. Lattice parameters of the synthesized NiO powder were decreased after treatment of the dopant; parameters were increased when the concentration of Al was over the doping limit (5 mol% Al). The binding energy of $Ni^{2+}$ was chemically shifted to $Ni^{3+}$ by doping $Al^{3+}$ ion, as confirmed by the XPS analysis. The tilted structure of the synthesized NiO with 5 mol% Al dopant and the polycrystalline structure of the $Ni_{0.75}Al_{0.25}O$ were observed by HR-TEM analysis. The electrical conductivity of the newly synthesized NiO was highly improved by Al doping in the conductivity test. The electrical conductivity values of the commercial NiO and the synthesized NiO with 5 mol% Al dopant ($Ni_{0.95}Al_{0.05}O$) were 1,400 s/cm and 2,230 s/cm at $750^{\circ}C$, respectively. However, the electrical conductivity of the synthesized NiO with 10 mol% Al dopant ($Ni_{0.9}Al_{0.1}O$) decreased due to the scattering of free-electrons caused by the large number of impurity atoms; the electrical conductivity of $Ni_{0.9}Al_{0.1}O$ was 545 s/cm at $750^{\circ}C$.