• 한국세라믹학회지
• /
• 제28권4호
• /
• pp.305-314
• /
• 1991

This study was conducted to research the formation and the color development of NiO-ZnO-Fe2O3-TiO2-SnO2 system for the purpose of synthesizing the spinel pigments which are stable at high temperature. After preparing ZnO-Fe2O3 as a basic composition, {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.Fe2O3 system, {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.TiO2 system, and {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.SnO2 system were prepared with {{{{ chi }}=0, 0.2, 0.5, 0.7, 1 mole ratio respectively. The manufacturing was carried out at 128$0^{\circ}C$ for 30 minutes. The reflectance measurement and the X-ray analysis of these specimens were carried out and the results were summarized as follows. 1. In the specimens which included NiO, it was difficult for the spinel structure to be formed. 2. As increasing the contents of NiO and Fe2O3, all the groups which were yellow or green colored changed to brown. 3. NiO-ZnO-Fe2O3 system and NiO-ZnO-TiO2 system formed the spinel structure and the illmenite structure appeared in NiO-TiO2 system.

• 마이크로전자및패키징학회지
• /
• 제12권3호
• /
• pp.259-265
• /
• 2005

도금전류밀도에 따른 Ni박막과 $Ni-Al_2O_3$복합박막의 항복강도, 파괴 연신율 및 $Ni-Al_2O_3$ 복합박막내 $Al_2O_3$ 함유량을 분석하였다. $5\~20\;mA/cm^2$로 형성한 $Ni-Al_2O_3$ 내 $Al_2O_3$ 함유량은 $11.48\~11.64\;vol\%$로 거의 일정하였으나, 도금전류밀도가 $30\;mA/cm^2$로 증가함에 따라 $Al_2O_3$함유량이 $8.41\;vol\%$로 감소하였다. $Ni-Al_2O_3$ 복합박막은 모두 Ni 박막보다 높은 항복강도를 나타내었으며, 특히 $5\;mA/cm^2$로 도금한 $Ni-Al_2O_3$의 항복강도는 Ni에 비해 $50\%$증가하였다. 도금전류밀도가 증가함에 따라 Ni박막과 $Ni-Al_2O_3$복합박막의 파괴 연신율이 감소하였다. $5\;mA/cm^2$에서 도금한 $Ni-Al_2O_3$복합박막이 다른 전류밀도에서 형성한 복합박막에 비해 $Al_2O_3$가 균일하게 분산되어 있으며 가장 높은 항복강도와 파괴 연신율을 나타내었다.

• 청정기술
• /
• 제5권2호
• /
• pp.63-68
• /
• 1999

The activities of Ni(20wt%)/$La_2O_3$, Ni(20wt%)/${\gamma}-Al_2O_3$, and Ni(20wt%)/$SiO_2$ catalyst for $CO_2$ reforming of $CH_4$ were investigated in a fixed bed flow reactor under atmospheric condition. Catalyst characterization using XRD, TEM, SEM, BET analysis were also conducted. The catalytic activity of Ni(20wt%)/$La_2O_3$ catalyst has relatively superior to that of Ni(20wt%)/${\gamma}-Al_2O_3$ and Ni(20wt%)/$SiO_2$ catalyst. The good activity of Ni(20wt%)/$La_2O_3$ catalyst seems to depend on reduced $Ni^{\circ}$ phases of NiO($\rightarrow$ Ni + O), $LaNiO_3$($\rightarrow$ $Ni+La_2O_3$), Ni crystalline phases, and decoration of Ni phases by lanthanum species is also an important factor. Ni(20wt%)/${\gamma}-Al_2O_3$ and Ni(20wt%)/$SiO_2$ catalyst due to surface acidity resulted in the deposition of wisker type and encapsulate carbon on the surface of catalyst, but Ni(20wt%)/$La_2O_3$ catalyst did not show carbon on the surface of catalyst up to 8.5hr reaction.

• 한국수소및신에너지학회논문집
• /
• 제29권5호
• /
• pp.419-426
• /
• 2018

$Ni-La_2O_3-Ce_{0.8}Zr_{0.2}O_2$ catalysts with various $La_2O_3$ loading were investigated for hydrogen production from steam reforming of methane (SRM). The $La_2O_3$ loading influenced the physicochemical properties of $Ni-La_2O_3-Ce_{0.8}Zr_{0.2}O_2$ catalysts such as BET surface area, Ni dispersion, Ni size and reducibility. Among the prepared catalysts, $Ni-70La_2O_3-Ce_{0.8}Zr_{0.2}O_2$ catalyst showed the highest activity and stability at a very high gas hourly space velocity (GHSV) of $932,556h^{-1}$. This is mainly due to high Ni dispersion, small Ni size and high reducibility.

• 공업화학
• /
• 제8권3호
• /
• pp.382-388
• /
• 1997

본 연구는 펄스 반응기 및 고정층 연속반응기를 사용하여 ${\gamma}$-알루미나에 담지된 니켈촉매상에서 이산화탄소에 의한 프로판의 개질반응 특성을 고찰한 것이다 Ni/${\gamma}$-$A1_2O_3$촉매가 NiO/${\gamma}$-$A1_2O_3$촉매보다 $CO_2$의 해리능력과 프로판의 개질 능력이 우수한 것으로 나타났다. 프로판과 $CO_2$의 혼합물에 산소를 추가한 결과 프로판의 전환율이 증가하였고 표면의 탄소침적도 감소함을 알 수 있었다. Ni/${\gamma}$-$A1_2O_3$와 $Ga_2O_3$의 기계적 혼합 촉매는 Ni/${\gamma}$-$A1_2O_3$자체보다 촉매의 활성이 오래 유지되었고 두 상의 협동에 의한 상승효과(synergistic effect)가 관찰되었다.

• 공업화학
• /
• 제30권6호
• /
• pp.757-761
• /
• 2019

고정층 상압 유통식 반응기를 사용하여 M(1)-Ni(5)/AlCeO₃ (M = La, Ce, Y) 촉매상에서 메탄의 부분 산화 반응을 수행하여 수소의 수율을 조사하였다. XRD 분석으로 반응 전과 반응 후의 환원된 La(1)-Ni(5)/AlCeO₃ 촉매의 결정상 특성피크를 조사하였고 FESEM과 EDS 분석으로 La, Ni, Ce 금속 입자가 촉매 표면상에 균일하게 분포하고 있음을 조사하였다. XPS 분석으로 촉매 표면상에 O^2-, O₂^2-의 산소와 Ce³⁺, Ce⁴+, La³⁺, Ni²⁺ 등의 이온이 존재함을 알 수 있었고, Ni(5)/AlCeO₃ 촉매에 1 wt%의 La를 첨가하면 Ni2p_3/2과 Ce3d_5/2의 원자가 각각 52.7과 6.3%로 증가하였다. La(1)-Ni(5)/AlCeO₃ 촉매상에서 수소의 수율은 89.1%이었으며, M(1)-Ni(5)/AlCeO₃ (M = Ce, Y)보다 매우 우수하였다. AlCeO₃이 산소와 반응하여 만들어진 CeO₂의 Ce⁴⁺ 이온이 La³⁺로 치환됨으로서 격자에 산소 빈자리를 만들고 strong metal-support interaction (SMSI) 효과로 Ni 원자의 분산을 증가시켜 수소 수율를 향상시켰다.

• 한국분말재료학회지
• /
• 제10권3호
• /
• pp.195-200
• /
• 2003

Ni coated $Al_2O_3$ composite was successfully Prepared by the electroless deposition Process. The average size of Ni particles coated on the $Al_2O_3$ matrix powder was about 20 nm. It was hard to find any reaction compound as an impurity at interface between $Al_2O_3$ and Ni particles after sintering. The characterization of microstructure crystal structure and fracture behavior of the sintered body were investigated using XRD, TEM and Victors hardness tester, and compared with those of the sintered $Al_2O_3$ monolithic body. Many dislocations were observed in the Ni phase due to the difference of thermal expansion coefficient between $Al_2O_3$ and Ni phase, and no observed microcracks at their $Al_2O_3$ and Ni interface. In the $Al_2O_3$/Ni composite, the main fracture mode showed a mixed fracture with intergranular and transgranuluar type having some ,surface roughness. The fracture toughness was slightly increased due to the plastic deformation mechanism of Ni phase in the $Al_2O_3$/Ni composite.

• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.681-687
• /
• 2003

The syntheses of LaNiO$_3$Perovskite crystalline phase from mixtures of La$_2$O$_3$and NiO via it mechanochemical(used planetary mill) and a wet ball mill process were investigated. A single and stable LaNiO$_3$perovskite crystalline phase was successfully prepared by using a heat free mechanochemical process which produced a fine amorphous powder, while that phase was not formed in a wet ball mill process which needed heat treatment ranging from 500 to 150$0^{\circ}C$ and produced a coarse powder. It was shown that the LaNiO$_3$ceramics made of the mechanochemically synthesized powder possesed a good metallic characteristic.

• 한국표면공학회지
• /
• 제35권2호
• /
• pp.101-106
• /
• 2002

The microstructural changes of $NiCrAlY/ZrO_2$-$Y_2$$O_3$ composite coatings that were manufactured by air-plasma-spraying were investigated using XRD and SEM/EDS. The as-sprayed microstructure consisted of (Ni,Cr)-rich regions, ($ZrO_2$-$Y_2$$O_3$)-rich regions, and $Al_2$$O_3$-rich layers that were formed during spraying owing to the oxidation of Al in NiCrAlY. During oxidation between 900 and $1100^{\circ}C$ in air, Cr in the (Ni,Cr)-rich regions diffused toward the $Al_2$$O_3$-rich layers, and oxidized to be dissolved in $A1_2$$O_3$-rich layers. The oxidation of Ni in the (Ni,Cr)-rich regions was less distinct, except at the outer surface of the coating.

• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.145-149
• /
• 2015

LiCl 용융염에서 희토류 금속을 포함한 $Nd_2O_3-La_2O_3-NiO$ 복합산화물의 전해환원을 통한 $La_{0.5}Nd_{0.5}Ni_5$ 합금제조에 대한 연구를 수행하였다. $Nd_2O_3-La_2O_3-NiO$ 복합산화물은 $1100^{\circ}C$에서 소결시에 $NiNd_2O_4$ (스피넬)과 $LaNiO_3$ (페로브스카이트) 구조가 생성되었다. 스피넬 및 페로브스카이트 구조는 복합산화물의 전해환원 반응속도를 증가시켰다. LiCl 용융염에서 전해환원 반응 동안 $Nd_2O_3-La_2O_3-NiO$ 복합산화물은 Ni, $NiLa_2O_4$ 등의 다양한 중간생성물을 거쳐 $La_{0.5}Nd_{0.5}Ni_5$ 합금으로 환원됨을 확인할 수 있었다. XRD 분석결과를 통해 최종 생성물인 $La_{0.5}Nd_{0.5}Ni_5$의 생성 메카니즘을 제시하였다.