• Progress in Superconductivity
• /
• 제13권3호
• /
• pp.163-168
• /
• 2012

The effects of Ta substitution on the superconducting and magnetic properties of the $(Ru_{1-x}Ta_x)Sr_2(Gd_{1.4}Ce_{0.6})Cu_2O_z(0{\leq}x{\leq}0.5)$ system have been investigated. The X-ray diffraction measurements indicate that the Ta ion replaces Ru sites up to x = 0.4. It is found that the Ta substitution for Ru significantly reduces the weak-ferromagnetic component of the field-cooled magnetic susceptibility without an appreciable change of room temperature thermopower at lower Ta doping level below x = 0.2. The resistive transition temperature tends to decrease monotonically from 27 K for the x = 0 sample to 16 K (9 K) for the x = 0.4 (x = 0.5) sample. These results suggest that superconductivity of the $(Ru_{1-x}Ta_x)Sr_2(Gd_{1.4}Ce_{0.6})Cu_2O_z$ compound is not significantly affected by the magnetic state of the Ru sublattice. The experimental results are discussed in connection with previous reports on the effects of Nb substitution.

• Current Optics and Photonics
• /
• 제2권3호
• /
• pp.261-268
• /
• 2018

Stimulated polariton scattering (SPS) from the $A_1$ transverse optical (TO) modes of $BaTiO_3$ bulk crystal generating a terahertz (THz) wave with the noncollinear phase-matching (NPM) condition is theoretically investigated. To our best knowledge, this is the first report on THz wave generation from $BaTiO_3$ bulk crystal via SPS. Phase-matching (PM) characteristics in the NPM configuration are analyzed. Effective parametric gain lengths for the Stokes and THz waves in the NPM configuration are calculated. The effective parametric gain coefficient and absorption coefficient of the THz wave in $BaTiO_3$ are theoretically simulated. The THz phonon flux densities generated via SPS in $BaTiO_3$ are theoretically calculated by solving the coupled wave equations under the NPM condition. The PM characteristics and THz-wave parametric gain characteristics in $BaTiO_3$ are compared to those in $MgO:LiNbO_3$. The results of the analysis indicate that $BaTiO_3$ is an attractive optical crystal for efficient THz wave generation via SPS.

• 한국세라믹학회지
• /
• 제37권9호
• /
• pp.871-878
• /
• 2000

본 연구는 3mol% Pb(Sb$_{1}$2/Nb$_{1}$2/)O$_3$가 첨가된 상경계 영역의 Pb(Zr,Ti)O$_3$(PSN-PZT) 세라믹스에 대하여 RT66A와 광섬유센서를 이용하여, 교류강전계 하에서 압전 및 유전특성을 조사하였다. PSN-PZT 세라믹스의 압전 및 유전 특성에 미치는 non-180$^{\circ}$분역 재배열의 영향을 평가하기 위하여 RT66A와 MTI-2000 Fotonic$^{TM}$ sensor를 이용하여 인가전계와 주파수의 함수로 전계유기변위를 측정하였다. 그 결과, 교류강전계 하에서 전계유기변위는 강전계, 저주파수에서 큰 이력현상을 나타내고, 전계유기변위로부터 결정된 유효압전상수는 주파수가 감소할수록 증가하는 거동을 나타내고 있으며, 이러한 거동은 non-180$^{\circ}$분역 재배열의 영향으로 해석되었다.

• Journal of the Optical Society of Korea
• /
• 제11권3호
• /
• pp.130-132
• /
• 2007

The characteristics of $S\breve{o}lc$ filters in $X^{(2)}$ nonlinear photonic crystals, periodically poled lithium niobate ($LiNbO_3$), were investigated by the Jones matrix method. The transmittance increases and the full width half maximum of the filter becomes narrow as the duty ratio increases. However, the filtering wavelength does not change. The transmittance at the filtering wavelength is over 95% when the duty ratio is larger than 0.35.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1368-1369
• /
• 2006

In this thesis, the minuteness structure, piezoelectric, and dielectric characteristics of Pb[(Co0.5 W0.5) 0.03 (Ni1/3 Nb2/3) 0.07(Zr0.52 Ti0.48)0.9]O3+0.5Wt% MnO2 ceramics has been systematically investigated as a function of the sintering temperature after manufacturing the specimens with a general method. The electromechanical coupling coefficient (Kp) showed its maximum of 31.116[%] in the sintered specimens at $1050[^{\circ}C]$, and its minimum of 20.220[%] in the sintered specimens at $1150[^{\circ}C]$. The mechanical quality coefficient (Qm) marked the maximum of 139.526 at the sintering temperature of $1150[^{\circ}C]$.

• 암석학회지
• /
• 제12권3호
• /
• pp.119-134
• /
• 2003

육십령 복운모화강암은 광물학$.$지화학적으로 과알루미나 성질을 특징적으로 나타낸다. 육십령 화강암체는 1.15∼l.20 범위의 높은 알루미나 포화 지수와 2.20∼2.98wt% 범위의 높은 CIPW norm 강옥 함량을 나타낸다. 색지수는 <16%이고, FeO$^{T}$ +MgO+TiO$_2$,는 평균 1.9 wt%로서 우백질화강암에 해당한다. 육십령 복운모 우백질화강암은 SiO$_2$성분이 증가함에 따라, TiO$_2$, $Al_2$O$_3$, FeO, Fe$_2$O$_3$, MgO, CaO, $K_2$O, P$_2$O$_{5}$ , Rb, Ba, Sr 은 감소하는 경향을 나타내는 반면, Zr과 Th는 증가하는 경향을 나타내는데, 이는 장석, 흑운모, 인회석 저어콘의 분별경정작용에 기인한 것으로 해석된다. 거정질 암맥에는 SiO$_2$and P$_2$O$_{5}$ 는 높게, 그 외의 주원소는 결핍되어 나타난다. Manaslu, Hercynian 복운모 우백질화강암, Lachlan습곡대의 S-형 화강암과 비교해 보면, 육십령 복운모 우백질화강암은 낮은 Rb, 높은 Ba, Sr을 나타낸다. 거정질 암맥의 지화학적 특징은 육십령 복운모화강암을 형성했던 멜트로부터 일부 원소들의 제거 혹은 유동성에 의해 높은 Rb, Nb와, 낮은 Ba, Sr, Zr, Th, Pb 함유를 나타낸다. 육십령 복운모 우백질화강암은 총 휘토류 함량이 95.7∼123.3ppm 범위를 나타내며, 운석에 대해 표준해보면, 저 내지 중정도의 Eu 이상(Eu/Eu＊= 0.7∼0.9)을 가지면서 경희토류원소가 풍부하고 중희토류원소가 결핍된 매우 경사가 져 있는((La/Yb)$_{N}$ = 6.9∼24.8) 변화를 보여준다. 반면에 페그마틱 암맥은 총 휘토류원소의 함량이 7.0ppm으로 운석에 대해 표준화하면, 강한 부의 Eu 이상(Eu/Eu＊= 0.2)을 가진 편평한 양상을 나타낸다. 복운모 우백질화강암을 형성했던 멜트의 성분은 기원암 뿐만 아니라 기원암이 녹은 후의 잔류물질의 양에도 의존한다. 특히 CaO/$Na_2$O의 비와 Rb/Sr-Rb/Ba의 비들은 강한 과알루미나질 화강암에서는 기원암의 성분에, 즉, 기원암의 사장석과 점토 함량 비에 주로 의존한다. 육십령 복운모 우백질화강암은 사장석 성분보다 점토 성분이 풍부한 암석에서 기원한 Manaslu와 Hercynian 복운모 우백질화강암들(예를 들면 Millevaches와 Gueret)보다는 더 높은 CaO/$Na_2$O의 비와 더 낮은 Rb/Sr-Rb/Ba 비를 나타내고 있는데, 이러한 지화학적 특징은 점토 성분보다는 사장석이 풍부한 석영장석질 암석으로부터 기원했던 것으로 사료된다.

• 한국전기전자재료학회논문지
• /
• 제26권12호
• /
• pp.867-871
• /
• 2013

The Ti adhesion layers were deposited onto the glass substrate for transparent capacitors using $Bi_2Mg_{2/3}Nb_{4/3}O_7$ (BMNO) dielectric thin films. Graphene was transferred onto the Ti/glass substrate after growing onto the Ni/$SiO_2$/Si using rapid-thermal pulse CVD (RTPCVD). The BMNO dielectric thin films were investigated for the microstructure, dielectric and leakage properties in the case of capacitors with and without Ti adhesion layers. Leakage current and dielectric properties were strongly dependent on the Ti adhesion layers grown for graphene bottom electrode.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2003년도 추계학술대회 발표 논문집
• /
• pp.163-168
• /
• 2003

In the present study, the piezoelectricity and polarization of multilayer ceramic actuator, being designed to stack PMN-PZ-PT ceramic layers and Ag-Pd electrode layers alternatively, were investigated under a consideration of geometric factor, the volume ratio of the ceramic to the electrode layers. The actuators were fabricated by tape casting of $0.2Pb(Mg_{1/3}Nb_{2/3)O_3-0.38PbZrO_3-0,42PbTiO_3$ followed by lamination and burnout & co-firing processes. The actuators of $10\times10\times0.6~2\textrm{mm}^3$ in size were formed in a way that $60 ~ 200\mu\textrm{m}$ thick were stacked alternatively with $5\mu\textrm{m}$ thick electrode layer. Increases in polarization and electric field-induced displacement with thickness of the ceramic layer were attributed to change of $90^{\circ}$/$180^{\circ}$ domain ratio, which was affected by interlayer internal stress. The piezoelectricity and actuation behaviors were found to depend upon the volume ratio (or thickness ratio) of ceramic to electrode layers.

• Transactions on Electrical and Electronic Materials
• /
• 제6권1호
• /
• pp.10-13
• /
• 2005

$Sr_{0.6}Ba_{0.4}Nb_{2}O_{6}$, hereafter SBN60, thin films of 300 nm thickness were deposited using ion beam sputtering technique, in which sintered ceramic target of the same composition was utilized and the $Ar:O_{2}$ gas ratio was controlled during deposition onto $Pt(100)/TiO_{2}/SiO_{2}/Si$ substrate. Crystallization and orientation behavior as well as electrical properties of the films were examined after annealing treatment at $650{\sim}800{\cric}C$. It was found that the film orientation was dependent upon $Ar:O_{2}$ratio, in which strong (00l) orientation was developed when the gas ratio was about 1:4 at $4.3{\times}10^{-4}$ torr. Typical remanent polarization (2Pr), the coercive field (Ec) and the dielectric constant of Pt/SBN60/Pt thin film capacitor were approximately $10{\mu}C/cm^{2}$, 60 kV/cm, and 615, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.719-720
• /
• 2009

We suggest a new approach to lower the operating voltage of plasma display devices using a piezoelectric transformer (PT). $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3$ (PMNT) was used as a piezoelectric material. The Rosen-type PT, with a compact size of 10 mm ${\times}$ 20 mm ${\times}$ 0.3 mm, was fabricated on a glass substrate. The fabricated PT was operated as a half-wave vibration mode at around 80~90 kHz. The maximum voltage step-up ratio was 3 at 87.8 kHz when the input voltage was 10.32 V (peak-to-peak).