• Title/Summary/Keyword: $Na-ZnCl_2$

Search Result 273, Processing Time 0.028 seconds

Composition of Chemical Components and Amount of Natural Supplies by Precipitation in Chinan Area of Chonbuk Province (전북 진안지역 강우의 화학성분 조성 및 천연공급량)

  • Han, Kang-Wan;Cho, Jae-Young;Son, Jae-Gwon
    • Korean Journal of Environmental Agriculture
    • /
    • v.17 no.4
    • /
    • pp.291-295
    • /
    • 1998
  • Changes of chemical components and natural supplies by precipitation at agricultural zone in Chinan area of Chonbuk province from May 1, 1997 to April 30, 1998 were investigated. pH of precipitation ranged $6.44{\sim}7.24$ and EC showed $14.23{\sim}30.67{\mu}S/cm$. The $total{\sim}N$, NH4-N and NO3-N were $1.43{\sim}10.14$, $0.57{\sim}4.39$, and $0.18{\sim}1.69㎎/L$ respectively. The content of total-P showed $0.015{\sim}0.087㎎/L$ but ortho-P was not detected. The content of suspended solid, $Ca^{++}$, $Mg^{++}$, $Na^+$ and $K^+$ showed $3.6{\sim}15.3$, $0.37{\sim}1.66$, $0.17{\sim}0.52$, $0.22{\sim}0.87$, and $0.17{\sim}0.58㎎/L$. The content of SO42- and Cl- showed $3.37{\sim}014.47㎎/L$ and $1.02{\sim}7.24㎎/L$ respectively. Only Cu and Zn of heavy metals were detected $0{\sim}0.019㎎/L$ and $0.009{\sim}0.098㎎/L$ but Cd, Cu, Ni and Cr were not detected. Natural supplies of chemical components were 39.48㎏/ha/yr of total-N, 21.82㎏/ha/yr of $NH_4-N$, 6.90㎏/ha/yr of $NO_3-N$ and 0.68㎏/ha/yr of total-P. Also $Ca^{++}$, $Mg^{++}$, $Na^+$, $K^+$, $SO_4^{2-}$ and $Cl^-$ were supplied 14.46, 5.00, 7.26, 5.46, 98.76 and 31.16㎏/ha/yr respectively. Only of heavy metals were supplied 0.024㎏/ha/yr of Cu and 0.044㎏/㏊/yr of Zn.

  • PDF

Corrosion Property Evaluation of Copper Alloy Tubes against Sea Water

  • Pang, Beilli;Ong, Sang-Kil;Lee, Hong-Ro
    • Journal of the Korean institute of surface engineering
    • /
    • v.42 no.6
    • /
    • pp.280-286
    • /
    • 2009
  • In this study, the corrosion property of copper alloy tubes in seawater has been investigated. Three copper alloys of nominal composition Cu-20Zn-2Al(Al-Brass), Cu-30Ni(CN70/30) and Cu-10Ni(CN90/10) were considered. The samples were immersed in 3%NaCl flowing solution at $90^{\circ}C$ for 30, 50 and 80 days. Corrosion rate of copper alloy tubes in 3%NaCl flowing solution was investigated by weight-loss measurements and electrochemical test. The CN70/30 showed lowest corrosion rate among three copper alloy tubes. Because of passive films formation, corrosion rates of three types of copper tubes were decrease with time. Surface characteristics of copper alloy tubes were analyzed by optical micrograph(OM), scanning electronic microscopy (SEM), energy dispersive X-ray analysis(EDAX) and X-ray diffraction patterns(XRD). CN70/30 showed partly pitting problem on the surface owing to high Fe content, even though having high resistant against corrosion. Cracks appeared on the surface of CN90/10 and CN70/30 after more than 50 days immersion, which could be derived from high nickel contents.

Studies on the Stabilization of Rayon Fabrics: 3. Effects of Long-Term Isothermal Stabilization at Low Temperatures and Chemical Pre-treatment (레이온직물의 안정화에 관한 연구: 3. 저온 장시간 등온 안정화 및 화학전처리 영향)

  • Cho, Chae Wook;Cho, Donghwan;Park, Jong Kyoo;Lee, Jae Yeol
    • Journal of Adhesion and Interface
    • /
    • v.11 no.1
    • /
    • pp.15-25
    • /
    • 2010
  • In the present study, isothermal stabilization processes for rayon fabrics were performed at two relatively low temperatures $180^{\circ}C$ and $200^{\circ}C$ for a long period of time. The results of weight loss, dimensional shrinkage, X-ray diffraction and scanning electron microscopic observations studied with the rayon fabrics before and after the isothermal stabilization indicated that the chemical and physical changes of rayon precursor fibers proceeded continuously and slowly at the stabilization temperature below $200^{\circ}C$. And the pre-treatment with four different chemical compounds done prior to stabilization process influenced differently the characteristics of rayon fabrics. As a result, it was noticed that under the given stabilization conditions, $H_3PO_4$ and $Na_3PO_4$ played a role in catalyzing the stabilization reaction of rayon fabric whereas $NH_4Cl$ and $ZnCl_2$ played a role in delaying or retarding the reaction. $H_3PO_4$ showed the lowest percent weight loss of the fabric in the second stabilization conducted at $350^{\circ}C$. It was considered that phosphoric acid, which has a function of flame retardant, contributed to retarding somewhat the subsequent reaction even in the second stabilization step.

Effect of Zn Content on the Corrosion Behavior of Ti-6Al-4V Alloy after Plasma Electrolytic Oxidation

  • Hwang, In-Jo;Choe, Han-Cheol
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2017.05a
    • /
    • pp.159-159
    • /
    • 2017
  • Ti-6Al-4V alloy have been used for dental implant because of its excellent biocompatibility, corrosion resistance, and mechanical properties. However, the integration of such implant in bone was not in good condition to achieve improved osseointergraiton. For solving this problem, calcium phosphate (CaP) has been applied as coating materials on Ti alloy implants for hard tissue applications because its chemical similarity to the inorganic component of human bone, capability of conducting bone formation and strong affinity to the surrounding bone tissue. Various metallic elements are known to play an important role in the bone formation and also affect bone mineral characteristics. Especially, Zn is essential for the growth of the human and Zn coating has a major impact on the improvement of corrosion resistance. Plasma electrolytic oxidation (PEO) is a promising technology to produce porous and firmly adherent inorganic Zn containing TiO2(Zn-TiO2)coatings on Ti surface, and the a mount of Zn introduced in to the coatings can be optimized by altering the electrolyte composition. In this study, effect of Zn content on the corrosion behavior of Ti-6Al-4V alloy after plasma electrolytic oxidation were studied by SEM, EDS, XRD, AC impedance, and potentiodynamic polarization test. The potentiodynamic polarization and AC impedance tests for corrosion behaviors were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67 mV/s and potential range from -1500 mV to +2000 mV. Also, AC impedance was performed at frequencies ranging from 10 MHz to 100 kHz for corrosion resistance.

  • PDF

Study on the Yellow Sandy Dust Phenomena in Korean Peninsula and Chemical Compositions in Fine Particles at Background Sites of Korea. (한반도의 황사 관측현황 및 배경지역 미세먼지의 화학적 조성에 관한 연구)

  • Baek Kwang-Wook;Chung Jin-Do
    • Journal of environmental and Sanitary engineering
    • /
    • v.19 no.4 s.54
    • /
    • pp.9-18
    • /
    • 2004
  • In this study, the observation data for the yellow sandy dust phenomena from the year 1999 to 2003 at background sites in Korea were collected at Global Atmospheric Observatory at An-Myeon island and its temporal variation were analyzed. The chemical characteristics of the fine particles were also analyzed in order to evaluate sources of the yellow sandy dust particles. The results showed that the monthly average mass concentration of the fine particles was the highest in springtime and the lowest in summertime in general. The magnitude of its variation was also the highest in March in which the occurrence of yellow sandy dust was the most frequent and thus the number of samples was the largest, while the lowest in June through September. The yearly variation of ion components contributions to the total mass concentration of the fine particles was slowly decreasing, showing that $63\%$ in 1999, $59\%$ in 2000 and $56\%$ in 2003. The most prevalent ion components in the fine particles were found to be $NO_3$ and $SO_4^{2-}$, which are known to be source materials of acidic precipitation, and $NH_4^+$, a neutralizing material of the acid precipitation. Relative proportion of metal components in the fine particles was calculated as $14\%$ in average, and their concentrations are in an order of Fe > Al > Na > Ca > Zn > Pb > Cu > Mn > Ni > Cd > Cr > Co > U. The results indicated that main sources of the metals was soil-originated Fe, Al, Ca, and Mg, and the contribution of anthropogenic air Pollution-originated Zn, Pb, Cu, Mn were also high and keep slightly increasing. Statistical analysis showed that the chemical components could be divided into soil-originated group of Mg, Al, Ca, Fe, and Mn and air pollution-originated group of $NO_3$, Zn, Pb, and they are occupying more than $60\%$of all the components in the dusty sand. The results explain that An-Myeon island is more influenced by soil-originated source than ocean-originated one and also the influencing strength of anthropogenic poilution-originated source is less than $50\%$ of that of soil-originated sources. Compared to non-yellow sandy period, the yellow sandy dust period showed that the amounts of soil-originated $Mg^{2+}$ and $Ca^{2+}$ and ocean-originated $Na^+$ and $Cl^-$ were increased to more than double and the metals of Mg, Al, Ca, Fe were also highly increased, while micro metal components such as Pb, Cd, Zn, which have a tendency of concentrating in air, were either decreased or maintained at nearly constant level. In the period of yellow sandy dust, a strong positive correlation was observed between water soluble ions and between metals in terms of its concentration, respectively. Factor analysis showed that the first group being comprised of about $43\%$ of the total inorganic components was affected by soil and they are ions of $Na^+,\;Mg^{2+}\;and\;Ca^{2+}$ and metals of Na, Fe, Mn and Ni. The result also showed that the metals of Mg and Cr were classified as second group and they were also highly affected by soil sources.

Sublayer assisted by hydrophilic and hydrophobic ZnO nanoparticles toward engineered osmosis process

  • Mansouri, Sina;Khalili, Soodabeh;Peyravi, Majid;Jahanshahi, Mohsen;Darabi, Rezvaneh Ramezani;Ardeshiri, Fatemeh;Rad, Ali Shokuhi
    • Korean Journal of Chemical Engineering
    • /
    • v.35 no.11
    • /
    • pp.2256-2268
    • /
    • 2018
  • Hydrophilic and hydrophobic polyethersulfone (PES)-zinc oxide (ZnO) sublayers were prepared by loading of ZnO nanoparticles into PES matrix. Both porosity and hydrophilicity of the hydrophilic sublayer were increased upon addition of hydrophilic ZnO, while these were decreased for the hydrophobic sublayer. In addition, the results demonstrated that the hydrophilic membrane exhibited smaller structural parameter (S value or S parameter or S), which is beneficial for improving pure water permeability and decreasing mass transfer resistance. In contrast, a higher S parameter was obtained for the hydrophobic membrane. With a 2 M NaCl as DS and DI water as FS, the pure water flux of hydrophilic TFN0.5 membrane was increased from $21.02L/m^2h$ to $30.06L/m^2h$ and decreased for hydrophobic TFN0.5 membrane to $14.98L/m^2h$, while the salt flux of hydrophilic membrane increased from $10.12g/m^2h$ to $17.31g/m^2h$ and decreased for hydrophobic TFN0.5 membrane to $3.12g/m^2h$. The increment in pure water permeability can be ascribed to reduction in S parameter, which resulted in reduced internal concentration polarization (ICP). The current study provides a feasible and low cost procedure to decrease the ICP in FO processes.

Evaluation of Groundwater Quality in Northern Bangladesh for Irrigation, Drinking and Industrial Uses (북부 방글라데시에서 관개, 음용 및 공업용수로 사용되는 지하수의 수질)

  • Islam, Jahidul Mohammad;Laiju, Nahida;Nasirullah, Tarek;Miah, Nuruddin Mohammad;Owen, Jeffrey S.;Kim, Bom-Chul
    • Journal of Environmental Impact Assessment
    • /
    • v.19 no.3
    • /
    • pp.281-296
    • /
    • 2010
  • 방그라데시 북부에 위치한 풀바리 우파질라 지역의 지하수에서 pH, EC, 주요 양이온 ($Ca^{2+}$, $Mg^{2+}$, $Na^+$, $K^+$, $Zn^{2+}$, $Cu^{2+}$, $Mn^{2+}$, $Fe^{3+}$, and $As^{3+}$), 주요 음이온 (${CO_3}^{2-}$, $HCO_3{^-}$, $NO_3{^-}$, ${SO_4}^{2-}$ and $Cl^-$) 그리고 total dissolved solids (TDS) 등의 용존물질 함량을 측정하였다. 또한 sodium adsorption ratio (SAR), soluble sodium percentage (SSP), residual sodium carbonate (RSC), 경도 등의 지표도 계산하였다. 전체적으로 지하수의 pH는 약알칼리성 (6.24 - 8.10)을 띄었으며, 주요 양이온은 $Ca^{2+}$, $Mg^{2+}$ and $Na^+$ 이었고, 주요 음이온은 $HCO_3{^-}$ and $Cl^-$ 으로서 전형적인 담수의 이온조성을 보였다. $Cu^{2+}$, $Mn^{2+}$ and $Fe^{3+}$ 의 최대 농도는 각각 1.71, 0.606, 0.125 mg/L 이었다. 방글라데시의 여러 지역에서는 비소에 의한 지하수의 오염이 흔히 나 타나고 있으나 이지역에서 비소의 최대농도가 0.41 mg/L로서 기준치인 0.05 mg/L 보다 낮은 오 염도를 보였다. TDS와 SAR, SSP 등으로 볼 때 이 지역의 지하수는 대부분 양호한 수질을 가지는 담수인 것으로 평가된다. $As^{3+}$, $Zn^{2+}$, $Mn^{2+}$, $Fe^{3+}$, ${SO_4}^{2-}$, $NO_3{^-}$ and $Cl^-$ 등의 농도는 음용수로 적합한 수준이었으나 일부 항목은 특정 산업용도로는 부적합한 농도를 보였다. 현재로서는 이지역 의 지하수는 대부분 음용이 가능하고 일부 산업용에 대해서만 부적합성을 보였다. 그러나 앞으로 지 하수의 이용과 산업활동이 증가하면 방글라데시의 많은 다른 지역의 지하수에서 발생한 사례와 같 이 용존물질의 농도가 증가하여 물의 용도에 제한을 받게 될 우려가 있다.

항혈전 약물 개발 연구

  • 강삼식;윤혜숙
    • Proceedings of the Korean Society of Applied Pharmacology
    • /
    • 1993.04a
    • /
    • pp.127-127
    • /
    • 1993
  • 작약의 메타놀에기스를 작용성분을 추적하면서 분리하였으며 EtOAc 분획으로부터 gallic acid methylester(GA-1) 및 paeonoldmf 혈소판 응집억제 작용 물질로서 분리하였으며 Paeonol은 혈소판 응집억제 작용이 이비 보고된바 있다. GA-1은 오가피로부터 혈소판 응집억제 작용물질로서 분리된 DBA-1과 구조적으로 매우 유사하며 혈소판 응집억제 작용물질로서 알려진 aspirin의 구조와 유사하다. Platelet aggregometer을 이용하여 DBA 및 GA analogs 13종(DBA-1-10 및 GA-1-3)들이 ADP 또는 collagen에 의하여 유도된 혈소판 응집에 대하여 억제작용을 보이는가를 검색하였다. 이들중 aspirin과 유사하게 억제작용을 보인 DBA-1-3-7-9-10, GA-3 및 paeonol에 대하여 mouse를 이용한 in vivotlfgja을 시행하였다. 즉 endotoxin 또는 collagen 과 epinephrine을 정맥주사하여 intravascular thrombosis를 일으켜 혈소판수를 감소시키며 이때 이들 물질들의 혈소판 감소 억제효과를 관찰하였다. 대조약물로서 사용한 aspirin은 collagen과 epinephrine에 의한 혈소판 감소를 현저히 억제한 반면 endotoxin에 의한 혈소판 감소에는 효과가 없었다. DBA-9, -10, GA-3 및 paeonol은 endotoxin에 의한 혈소판감소에 대하여 약한 억제효과를 보였으며, 검색시료 전부가 collagen과 epinephrine에 의한 혈소판 감소에는 aspirin보다 작용이 적었으나, DBA-10, GA-3 및 paeonol은 현저하게 억제효과 있었다. 또한 collagen과 epinephrine 동시 투여에 의한 치사 실험에서는 DBAD-7, GA-3 및 paeonol이 aspirin과 같거나 강한 사망 억제 효과가 있었다.cyclopropyl-7-(2-furanyl) -6-fluoro-1,4-dihydro-4-oxo-3-quinoline carboxylic acid (compound 4), 1-cyclopropyl-7-(2-thiophenyl)-6-fluoro-1,4-dihydro-4-oxo-3-quinoline carboxylic acid (compound 6) ,1-cyclopropyl-7-(3-pyridinyl)-6-fluoro-1,4-dihydro-4-oxo-3-quinoline carboxylic acid (compound 8), 1-cyclopropyl-7-(2-fluoro-3-pyridinyl)-6-fluoro-1,4-dihydro-4-oxo-3-quinoline carboxylic acid (compound 10)를 합성하였다.10^{-7}$ M)에 의한 단백인산화에 대하여는 더 미약한 억제-효과를 나타내었다. 이상의 결과는 PDE-1과 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구의 목적중의 하나인 인체유해 중금속이온인 Hg(II), Cd(II)등이 NaCl같은 염화물이 함유된 시료용액에 공해이온으로 존재할 경우 흡착에 의한 제거가

  • PDF

Purification and Characterization of an Acid Deoxyribonuclease from the Cultured Mycelia of Cordyceps sinensis

  • Ye, Maoqing;Hu, Zheng;Fan, Ying;He, Ling;Xia, Fubao;Zou, Guolin
    • BMB Reports
    • /
    • v.37 no.4
    • /
    • pp.466-473
    • /
    • 2004
  • A new acid deoxyribonuclease (DNase) was purified from the cultured mycelia of Cordyceps sinensis, and designated CSDNase. CSDNase was purified by $(NH_4)_2SO_4$ precipitation, Sephacryl S-100 HR gel filtration, weak anion-exchange HPLC, and gel filtration HPLC. The protein was single-chained, with an apparent molecular mass of ca. 34 kDa, as revealed by SDS-PAGE, and an isoelectric point of 7.05, as estimated by isoelectric focusing. CSDNase acted on both double-stranded (ds) and single- stranded (ss) DNA, but preferentially on dsDNA. The optimum pH of CSDNase was pH 5.5 and its optimum temperature 55. The activity of CSDNase was not dependent on divalent cations, but its enzymic activity was inhibited by high concentration of the cation: $MgCl_2$ above 150 mM, $MnCl_2$ above 200 mM, $ZnCl_2$ above 150 mM, $CaCl_2$ above 200 mM, NaCl above 300 mM, and KCl above 300 mM. CSDNase was found to hydrolyze DNA, and to generate 3-phosphate and 5-OH termini. These results indicate that the nucleolytic properties of CSDNase are essentially the same as those of other well-characterized acid DNases, and that CSDNase is a member of the acid DNase family. To our knowledge, this is the first report of an acid DNase in a fungus.

Geochemistry of Stream Water around the Abandoned Boeun Coal Mine, Hoenam Area (보은제일폐탄광 주변 하천수의 지구화학적 특징)

  • Jeon, Seo-Ryeong;Shin, Ik-Jong;Lee, Kyu-Seung
    • Korean Journal of Environmental Agriculture
    • /
    • v.20 no.1
    • /
    • pp.20-27
    • /
    • 2001
  • Stream water chemistry in the abandoned Boeun Jeil coal mine area was studied for a period of 3 months, including rainy and dry season. The stream waters were a nearly neutral and slightly alkali condition, and $Mg-SO_4$ type with Mg>Ca>Na>K and $SO_4>HCO_3>Cl>NO_3$. Chemical composition of the stream water was quite irregular during the experimental period. Concentrations of Na, K, $HCO_3$, U, Sr, and Cr decreased by $10{\sim}30%$ during rainy season, caused by dilution effects with rain. The concentration of Ca, Mg, $NO_3$, Cd, and Co increased during the rainy season, caused by more easily dissolved from bedrocks or mine drainage with slightly acidic condition than dry season. The stream water was enriched in Mg, Ca, $HCO_3$, $SO_4$, Al, Fe, Zn, Ni, Co, Cr, Cd, Sr and U. Concentrations of Na, Mg, Ca, $SO_4$, $HCO_3$, Fe, Zn, Ni, Sr, and U decreased linearly with distance from the mine adit. These elements were strongly controlled by dilution of unpolluted water influx and/or adsorption on the clay minerals and iron oxyhydroxide precipitates. This mine area exhibited two main weathering processes ; 1) oxidation with acidification derived from Fe sulphides, and 2) pH buffering due to Ca and Mg carbonate dissolution. This weathering processes were followed by adsorption of metals on iron oxyhydroxides and precipitation.

  • PDF