• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.5
• /
• pp.347-355
• /
• 2000

To determine nitrogen balance (Input-Output) of Korea that was asked by Joint Working Party of the Committee for Agriculture and the Environment Policy Committee, OECD, nitrogen input and output were separately investigated as followings: nitrogen input included the amounts of chemical fertilizer consumption, cattle manure production, and biological nitrogen fixation in the national scale, and nitrogen output summed amounts withdrawn by crop and pasture harvesting, and crop residue removal, and lost by denitrification. In 1997, nitrogen balance of Korea was $158kg\;ha^{-1}$ and $211kg\;ha^{-1}$ on including and excluding denitrification loss, respectively. N balance excluded N loss by denitrification and N withdrawal by crop residues on nitrogen output was $250kg\;ha^{-1}$, which OECD asked to except two items from N balance determination because participants were not enough their data. Nitrogen balance was increased to 1.7~2.3 times in 1997 compared with 70 and $162kg\;ha^{-1}$ in 1985, which calculated on the condition of including denitrification and excluding denitrification and removal of crop residues in nitrogen output, respectively. This increase was caused mainly by increasing livestock manure production and chemical fertilizer consumption together with agricultural land area decrease. Nitrogen input was composed with 59% of chemical fertilizer. 42% of cattle manure and 5% of others in 1997, and output was with 73% of crop production, 23% of crop residue withdrawal and 4% of pasture production. Average nitrogen balance excluded N loss by denitrification and N withdrawals by crop residues in 1995~1997 calculated by OECD was $253kg\;ha^{-1}$, which was the second highest rank in OECD participants following $262kg\;ha^{-1}$ of Netherlands. Japanese N balance that has similar farming system with us was $135kg\;ha^{-1}$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.3
• /
• pp.307-315
• /
• 1988

This experiment was conducted to find out the effects of fertilizer-N and co-inoculation of the Rhizobium japonicum and the Azospirillum lipoferum on nodulation, $N_2$-fixation, and growth of soybean under in situ conditions. The results obtained were summarized as follows: 1. The yield of soybean dry matter was significantly greater in the R. japonicum alone, and the mixed inoculation of R. japonicum and A. lipoferum than those of un-inoculation. But inoculum applied by different strains did not significant effect on plant growth. The effects of nitrogen applied on soybean dry matter were higher in the ammonium sulfate than potassium nitrate, and decreased with increasing rates of two forms of nitrogen applied regardless of nitrogen source. 2. Acetylene redution activity was more increased in a single inoculation of R. japonicum than those of the mixed inoculation of the R. japonicum and the A. lipoferum, in cases of Danyeup cultivar, regardless of the form of combined nitrogen used. 3. Nodule mass and total nitrogenase activity per plant showed the positively significant effect in the interrelationship between dry matter of soybean and some factors related to nitrogen fixation efficiency. 4. The highest symbiotic effect in Danyeup cultivar was obtained when a single R. japonicum 84 Dy-1 strain was inoculated and fertilized with 18 mM potassium nitrate.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.4
• /
• pp.283-305
• /
• 2001

The purpose of this study was to analyze the stress distribution of condylar regions and edentulous mandible with implant-supported cantilever prostheses on the certain conditions, such as amount of load, location of load, direction of load, fixation or non-fixation on the condylar regions. Three dimensional finite element analysis was used for this study. FEM model was created by using commercial software, ANSYS(Swanson, Inc., U.S.A.). Fixed model which was fixed on the condylar regions was modeled with 74323 elements and 15387 nodes and spring model which was sprung on the condylar regions was modeled with 75020 elements and 15887 nodes. Six Br${\aa}$nemark implants with 3.75 mm diameter and 13 mm length were incorporated in the models. The placement was 4.4 mm from the midline for the first implant; the other two in each quardrant were 6.5 mm apart. The stress distribution on each model through the designed mandible was evaluated under 500N vertical load, 250N horizontal load linguobuccally, buccal 20 degree 250N oblique load and buccal 45 degree 250N oblique load. The load points were at 0 mm, 10 mm, 20 mm along the cantilever prostheses from the center of the distal fixture. The results were as follows; 1. The stress distribution of condylar regions between two models showed conspicuous differences. Fixed model showed conspicuous stress concentration on the condylar regions than spring model under vertical load only. On the other hand, spring model showed conspicuous stress concentration on the condylar regions than fixed model under 250N horizontal load linguobuccally, buccal 20 degree 250N oblique load and buccal 45 degree 250N oblique load. 2. Fixed model showed stress concentration on the posterior and mesial side of working and balancing condylar necks but spring model showed stress concentration on the posterior and mesial side of working condylar neck and the posterior and lateral side of balancing condylar neck under vertical load. 3. Fixed model showed stress concentration on the posterior and lateral side of working condylar neck and the anterior and mesial side of balancing condylar neck but spring model showed stress concentration on the anterior sides of working and balancing condylar necks under horizontal load linguobuccally. 4. Fixed model showed stress concentration on the posterior side of working condylar neck and the posterior and lateral side of balancing condylar neck but spring model showed stress concentration on the anterior side of working condylar neck and the anterior and lateral side of balancing condylar neck under buccal 20 degree oblique load. 5. Fixed model showed stress concentration on the anterior and lateral side of working condylar neck and the posterior and mesial side of balancing condylar neck but spring model showed stress concentration on the anterior side of working condylar neck and the anterior and lateral side of balancing condylar neck under buccal 45 degree oblique load.. 6. The stress distribution of bone around implants between two models revealed difference slightly. In general, magnitude of Von Mises stress was the greatest at the bone around the most distal implant and the progressive decrease more and more mesially. Under vertical load, the stress values were similar between implant neck and superstructure vertically, besides the greatest on the distal side horizontally. 7. Under horizontal load linguobuccally, buccal 20 degree oblique load and buccal 45 degree oblique load, the stress values were the greatest on the implant neck vertically, and great on the labial and lingual sides horizontally. After all, it was considered that spring model was an indispensable condition for the comprehension of the stress distributions of condylar regions.

• Journal of Chest Surgery
• /
• v.37 no.6
• /
• pp.524-529
• /
• 2004

Background: Since the Nuss procedure for the correction of pectus excavatum is in its early stage, there have been problems that need to be solved. We examined complications in a single-institute experience of the Nuss technique in order to develop possible solutions to prevent them. Material and Method: 335 consecutive patients, who underwent the modified Nuss procedure between August 1999 and October 2002, were studied retrospectively. Median age was 8 years (range 1 to 46). 264 patients (78.8%) were in pediatric group (age$\leq$15) and 71 patients (21.2%) were in adult group (age> 15). 193 patients (57.6%) had symmetric and 142 patients (42.4%) had asymmetric pectus configurations. Risk factors predicting postoperative complications were analyzed using multi-variate logistic regression. Result: Postoperative complication rates were 18.9% (61/335) in total patients. Frequent complications were pneumothorax 24 (7.5%), bar displacement 11 (3.4%), and wound seroma 10 (3.1%) in order. Early complications (within a month, 49 cases, 15.2%) were pneumothorax (n=23, 6.9%), wound seroma (n=12, 3.6%), and bar displacement (n=8, 2.4%). Late complications (after a month, 12 cases, 3.7%) were pericarditis and pericardial effusion (n=5, 1.5%), bar displacement (n=4, 1.2%), and hemothorax (n=3, 0.9%). Techniques were modified to prevent complications especially in bar shaping and fixation, which led to decrease complication rate in later experience (Operation Date 1: 15/51 (29.4%) vs Operation Date 2: 34/284 (12.0%), p=0.004). Grand Canyon type (eccentric long canal type) showed higher complication rate than other types (GC type: 12/30(40%) vs Others: 37/305 (12.1%), p<0.001). Major risk factors are severity of pectus (OR=2.88, p=0.038), Grand Canyon type (OR=2.82, p=0.044), and Op. Date 1 (OR=4.05, p=0.001). Conclusion: Major complications were related to severe eccentric type of pectus configuration (Grand Canyon type) and lack of surgeon's experience (Op. Date 1). Com-plication rate was reduced with accumulation of experience and advancement of surgical techniques. The Nuss procedure can be performed at a low risk of complications with our current technique.

• Science of Emotion and Sensibility
• /
• v.18 no.1
• /
• pp.15-26
• /
• 2015

In this paper, amplitude and phase difference patterns for theta and alpha bands of the Evoked Potential(EP) in relation to perform a task at visual stimulus were analyzed using the Empirical mode decomposition(EMD). The EMD is applied to decompose EP signals with task-related sub-frequency band signals. Intrinsic mode function was implied in Hilbert transform and instantaneous amplitude and phase differences of theta and alpha were derived from Hilbert transformed EP. In a task status, large amplitude for both bands was observed at P2, N2, and P3 points as well as maximum phase difference was observed at N1 and P2. We confirmed that both bands are associated with a task at visual stimulus, and less associated with fixation. The proposed method enhances the time and frequency resolution in comparison with band-pass filter method which observed different phase results according to conditions.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.2
• /
• pp.103-112
• /
• 2011

The main objective of this research was to estimate Nitrogen budget of South Korea in 2008. Input-output budgets for nitrogen fluxes were categorized into three sections: cities, agricultural area, and forest. Chemical and biological fixation, dry and wet deposition, imported food and feed were used as the nitrogen input. Crop uptake, volatilization, denitrification, leaching, runoff, and forest consumption were used as the nitrogen outputs. Annual total nitrogen input was 1,294,155 ton/yr, and output was 632,228 ton/yr. Comparison with a previous research in 2005 indicates that nitrogen input was decreased by 1.9% due to the decrease in nitrogen fertilizer while nitrogen output was decreased by 6.3%. Non-point source (NPS) pollution was also estimated by mass balance approach, which increased by 22% than the previous research in 2005. The emission of nitrous oxide ($N_2O$) caused by denitrification was newly examined in this research. About 8,289 ton/yr of $N_2O$ was released from agriculture area and domestic wastewater treatment plant.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.2
• /
• pp.77-82
• /
• 2017

Objectives: The aim of this study was to compare the mechanical resistance of four different osteosyntheses modeled in two different sagittal split ramus osteotomy (SSRO) designs and to determine the linear loading in a universal testing machine. Materials and Methods: An in vitro experiment was conducted with 40 polyurethane hemimandibles. The samples were divided into two groups based on osteotomy design; Group I, right angles between osteotomies and Group II, no right angles between osteotomies. In each group, the hemimandibles were distributed into four subgroups according to the osteosynthesis method, using one 4-hole 2.0 mm conventional or locking plate, with or without one bicortical screw with a length of 12.0 mm (hybrid technique). Each subgroup contained five samples and was subjected to a linear loading test in a universal testing machine. Results: The peak load and peak displacement were compared for statistical significance using PASW Statistics 18.0 (IBM Co., USA). In general, there was no difference between the peak load and peak displacement related to osteotomy design. However, when the subgroups were compared, the osteotomy without right angles offered higher mechanical resistance when one conventional or locking 2.0 mm plate was used. One locking plate with one bicortical screw showed higher mechanical resistance ($162.72{\pm}42.55N$), and these results were statistically significantly compared to one conventional plate with monocortical screws (P=0.016) and one locking plate with monocortical screws (P=0.012). The difference in peak displacement was not statistically significant based on osteotomy design or internal fixation system configuration. Conclusion: The placement of one bicortical screw in the distal region promoted better stabilization of SSRO. The osteotomy design did not influence the mechanical behavior of SSRO when the hybrid technique was applied.

• Archives of Plastic Surgery
• /
• v.46 no.4
• /
• pp.336-343
• /
• 2019

Background Sternal rigid plate fixation (RPF) has been adopted in recent years in high-risk cases to reduce complications associated with steel wire cerclage, the traditional approach to sternal closure. While sternal RPF has been associated with lower complication rates than wire cerclage, it has its own complication profile that requires evaluation, necessitating a critical examination from a national perspective. This study will report the outcomes and associated risk factors of sternal RPF using a national database. Methods Patients undergoing sternal RPF from 2005 to 2016 in the American College of Surgeons-National Surgical Quality Improvement Program were identified. Demographics, perioperative information, and complication rates were reviewed. Logistic regression analysis was performed to identify risk factors for postoperative complications. Results There were 381 patient cases of RPF identified. The most common complications included bleeding (28.9%), mechanical ventilation >48 hours (16.5%), and reoperation/readmission (15.2%). Top risk factors for complications included dyspnea (odds ratio [OR], 2.672; P<0.001), nonelective procedure (OR, 2.164; P=0.010), congestive heart failure (OR, 2.152; P=0.048), open wound (OR, 1.977; P=0.024), and operating time (OR, 1.005; P<0.001). Conclusions Sternal RPF is associated with increased rates of three primary complications: blood loss requiring transfusion, ventilation >48 hours, and reoperation/readmission, each of which affected over 15% of the study population. Smokers remain at an increased risk for surgical site infection and sternal dehiscence despite RPF's purported benefit to minimize these outcomes. Complications of primary versus delayed sternal RPF are roughly equivalent, but individual patients may perform better with one versus the other based on identified risk factors.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.2
• /
• pp.149-153
• /
• 2010

The purpose of this retrospective study was to evaluate relapse, comparing large and small maxillary advancements with four-plate rigid fixation and without bone grafting. All patients had skeletal class III malocclusion, and underwent bimaxillary surgery. Standardized cephalometric analysis by one examiner was performed on serial radiographs of 14 patients immediately before surgery, and within 1 week and at least 6 months postoperatively (mean 10 months). The group was divided into two subsets to determine whether the magnitude of relapse. In group 1 ($\leq$ 5 mm, n = 8), the average advancement was $4.0{\pm}0.9\;mm$, with a mean relapse of $0.1{\pm}0.5\;mm$. In group 2 (6-8 mm, n = 4), the average advancement was $6.8{\pm}0.9\;mm$, with a mean relapse of $0.7{\pm}0.4\;mm$. There was no statistical difference in the measured relapse among the groups. Maxillary advancement with a 1-piece Le Fort I osteotomy is a relatively stable procedure.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.3 no.2
• /
• pp.127-133
• /
• 2001

With an objective of evolving quantitatively and qualitatively superior bivoltine breeds/hybrids of silkworm Bombyx mori L. for tropical conditions, breeding work was initiated in Central Sericultural Research and Training Institute, Mysore during 1992 by utilizing two Japanese hybrids namely BNl8$\times$BCS25 and Shunrei$\times$Shogetsu along with Indian evolved breed, KA. The breed CSR12 which is characterized with sex-limited larval marking and white oval cocoons was evolved from the Japanese hybrid BNl8 ${\times}$ BCS25 by crossing with KA, while the breed CSR6 which is characterized with normal marking (marked larvae) and white dumbbell cocoons was extracted from the Japanese commercial hybrid Shunrei${\times}$Shogetsu through continuous inbreeding coupled with selection. After fixation, these breeds along with other newly evolved breeds were subjected to hybrid study under optimum environmental conditions in the laboratory for expression of full potential of the genotypes. These hybrids were evaluated by Multiple Trait Evaluation Index (Mano et al., 1993). The hybrid CSR12${\times}$CSR6 was selected based multiple trait evaluation index value. The hybrid CSR12$\times$CSR6 recorded survival of 96.0%, shell weight of 50.0 cg, shell ratio of 24.3%, raw silk percentage of 19.6, filament length of 1,216 m, boil off loss of 22.4% and renditta of 5.1. On the other hand, the control hybrid (KA ${\times}$ NB4D2) has recorded survival of 90.6%, shell weight of 42.1 cg, shell ratio of 20.4%, raw silk percentage of 15.9, filament length of 999 m, boil off loss of 24.8% and renditta of 6.3. The hybrid CSR12$\times$CSR6 was authorized during 1997 by Central Silk Board, Government of India for commercial exploitation during favourable months based on national level race authorization test.