• 대한임베디드공학회논문지
• /
• 제11권3호
• /
• pp.143-151
• /
• 2016

In this paper, a real-time air quality monitoring system based on wireless network is designed and implemented for industrial park or multiuse facilities. The existing gas detector is high price and hard to apply the remote monitoring system. On the other hand, demand for air quality monitoring is increasing because of industrial gas accident, air pollution, and so on. In Korea, indoor air regulation was established by law. According to indoor air regulation, CO2, CO, and NO2 are important gases as the air quality standard. So we study the gas detector for indoor air quality and the wireless network system. The wireless network consist of sensor network and WCDMA to apply various place. To verify the performance of the implemented gas detector, the gas measurement experiment is performed in laboratory environment by using the realized gas detecting wireless sensor node. And we evaluate the experiment results.

• International Journal of Clinical Preventive Dentistry
• /
• 제14권4호
• /
• pp.247-255
• /
• 2018

Objective: Osseointegration is essential process for successful implants and effects to implant in long term, therefore, passive fitness of good prosthesis is necessary. To make a good prosthesis, at first it should be done a sectioned casting and then joined method of sectioned casting body is recommended. Methods: In this study, to provide the fundamental data on stable connection method for successful implants, the author tested fitness of casting body, and compared difference between gas soldering technique and laser welding technique. Results: In fitness test of 2 abutment (test A, C), gas soldering group's fitness in the opposite part of connection was worse than laser welding group. In fitness test of 3 abutment (test B, D), gap distance was increased both in gas soldering technique and laser welding technique. Gap distance at the connecting part and the opposite part of the abutment in gas soldering technique was worse than laser welding technique and the more additional abutment, the worse gap distance in gas soldering technique. In fitness test of 3 abutment (test B, D), there's little variation in No. 2 abutment when connecting soldering process was done and there's little influence on already soldered connection part when the additional soldering connection was done. Conclusion: On weak loading condition and the part which is needed an accuracy, laser welding technique is more effective and on long-span prosthesis and frequent chewing loading part, laser welding technique is recommended first and applying additional gas soldering technique would be better for making much more successful prosthesis.

• Advances in environmental research
• /
• 제7권2호
• /
• pp.73-85
• /
• 2018

The anaerobically digestion and agricultural application of organic wastes was conducted using food wastes and cow dung. Twenty kilograms each of the feed stocks was added into two 30 liters-capacity batch digesters. The anaerobic digestion was carried out within a temperature range of $25-31^{\circ}C$ for a retention time of 51 days. The results showed a cumulative gas yield of 5.0 bars for food waste and no gas production for cow dung within the retention time. Bacteria such as Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Proteus vulgaris and Clostridium sp were isolated. Fungi isolated included Aspergillus niger, Aspergillus nidulan, Trichophyton rubrum and Epidermophyton flocossum. The non-dispersive infrared (NDIR) analysis of the biogas produced confirmed that the gas consisted of $CH_4$, $CO_2$ and $H_2$. Statistical analysis revealed there was no significant correlation between temperature and biogas produced from the organic wastes (r= 0.177, p = 0.483).The organic wastes from the biogas production process stimulated maize growth when compared to control (soil without organic waste) and indicated maximum height. The study therefore reveals that food waste as potential substrates for biogas production has a moderate bio-fertilizer potential for improving plant growth and yield when added to soil.

• 한국환경보건학회지
• /
• 제17권2호
• /
• pp.9-16
• /
• 1991

Personal NO$_{2}$ expousre and time activity patterns were measured during March, 1991 for 46 taxi drivers in the Seoul area. Badge-type personal samplers were worn for 24 hours by taxidrivers for monitoring personal expousre to NO$_{2}$. A standard respiratory questionnaire was administered and pulmonary function test was performed using a protable spirometry. The mean concentrations of personal NO$_{2}$ expousres of taxi drivers were 0.55ppm. Personal NO$_{2}$ exposures of taxi drivers were seemed to be higher in longer period of driving, smokers, and use of LP gas in homes. Prevalence rate of respiratory symptoms and the level of pulmonary function(FEV$_{1.0}$ and FVC) seemed to be related to higher personal NO$_{2}$ concentrations. It is concluded that persoanl NO$_{2}$ expousres of taxi drivers are probably affected by indoor NO$_{2}$ levels of a tax/and their common activities.

• 한국가스학회지
• /
• 제16권5호
• /
• pp.14-20
• /
• 2012

바이오가스는 Biomass, 유기성 폐기물 등의 혐기소화 공정을 통해 얻을 수 있는 대표적인 신재생연료로 저발 열량에도 불구하고 탄소중립적인 특성이 있기 때문에 이를 엔진에 적용하여 에너지를 생산하고자 하는 노력이 계속되어왔다. 바이오가스는 원료의 종류 및 혐기소화 공정 조건에 따라 그 연료 조성이 달라질 수 있는데, 이러한 조성 변화는 엔진 성능에 큰 영향을 미칠 수 있기 때문에 이에 대한 연구가 필요한 실정이다. 본 연구에서는 바이오가스 연료 내 불활성가스의 종류 및 비율을 변화시켜 모사하고 이를 이용하여 바이오가스 내 불활성가스 종류의 변화가 엔진 성능 및 배기 특성에 주는 영향을 파악하였다. 실험 결과로 각 불활성가스 종류 및 함량에 따른 최적 점화시기를 결정하였으며, 불활성 가스 조성 변화가 엔진 출력, 효율, 배기 성능에 미치는 영향을 제시하였다.

• 청정기술
• /
• 제24권3호
• /
• pp.212-220
• /
• 2018

순산소 연소기술은 화력발전에 적용 가능한 유망한 온실가스 감축 기술로 평가되고 있다. 본 연구는 환경적 관점에서 순환유동층을 활용한 순산소 연소조건에 로 내 탈황 및 탈질법을 적용하여 NO 및 $SO_2$의 거동을 살펴보는 한편, $SO_3$, $NH_3$, 그리고 $N_2O$의 발생 경향도 관측하였다. 이를 위해, 연소로 내 석회석 및 요소수를 투입하였다. 로 내 탈황법은 연소가스 내 $SO_2$ 농도를 ~403에서 ~41 ppm까지 저감하였다. 또한 $SO_3$ 형성의 주원료인 $SO_2$가 저감되면서 연소가스 내 $SO_3$ 농도도 ~3.9에서 ~1.4 ppm까지 감소되었다. 그러나 석회석 내 $CaCO_3$가 NO의 발생을 촉진하는 현상도 관측되었다. 연소가스 내 NO 농도는로 내 탈질법을 적용하여 ~26 - 34 ppm까지 저감되었다. 요소수 투입량 증가에 따라 연소가스 내 $NH_3$ 농도가 증가하여 최대 ~1.8 ppm으로 나타났으며, $N_2O$의 농도도 ~61에서 ~156 ppm까지 증가하였다. $N_2O$ 발생량 증가 현상은 요소수의 열분해 과정에서 생성된 HNCO가 $N_2O$로 전환되어 나타난다. 본 연구의 결과를 통해 로 내 연소가스 세정법을 적용할 경우 $NO_x$ 및 $SO_x$의 저감뿐만 아니라, 다른 오염물질의 발생에 대한 주의가 필요할 것으로 보인다.

• 한국안전학회지
• /
• 제15권2호
• /
• pp.92-96
• /
• 2000

In this experiment, we studied about concentration characteristics of $NO_x$ and generation of ozone in the reactor of corona discharge type by using mixed gas of $NO/N_2$ and $N_2/O_2$. In the case of the initial NO concentration increased, decrease rate of NO concentration was weakened and discharge input power of minimum NO concentration became high. When NO concentration was high, NO decomposition limit was appeared. And NO reduction rate was decreased, when initial NO concentration and discharge input power increased. When discharge input power was 5W, we could know the most proper energy value for treatment of NO. When the concentration of initial NO increased, generation of ozone decreased and in the case of same concentration of NO, according to discharge input power increase, generation of ozone increased.

• 한국안전학회지
• /
• 제6권3호
• /
• pp.5-11
• /
• 1991

To remove NO from flue gas, a direct decomposition method to $N_2$ and $O_2$ was investigated by using copper / zeolite catalyst. The copper ion-exchanged HY type zeolite has high activity on NO decomposition. The decomposition activity was increased with the increase of ion-exchange level, contacting time and reaction temperature in the range of 30$0^{\circ}C$ -50$0^{\circ}C$ , and decreased with the oxygen addition.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.85-90
• /
• 2010

As the environmental regulation of vehicle emission is strengthened, investigations for $NO_x$ and PM reduction strategies are popularly conducted. Two current available technologies for continuous $NO_x$ reduction onboard diesel vehicles are Selective Catalytic Reduction (SCR) using aqueous urea and lean $NO_x$ trap (LNT) catalysts. The experiments were conducted to investigate the $NO_x$ reduction performance of SCR system which can control the ratio of $NO/NO_2$, temperature and SV(space velocity), and the model gas was used which is similar to a diesel exhaust gas. The maximum reduction efficiency is indicated when the $NO:NO_2$ ratio is 1:1 and the SV is 30,000 $h^{-1}$ in $300^{\circ}C$. Generally, ammonia slip from SCR reactors are rooted to incomplete conversion of $NH_3$ over the SCR. In this research, slip was occurred in 6cases (except low SV and $NO:NO_2$ ratio is 1:1) after SCR. Among 6 case of slip occurrence, the maximum conversion efficiency is observed when SV is 60,000 $h^{-1}$ in $400^{\circ}C$.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권7호
• /
• pp.823-832
• /
• 2007

This paper presents the static characteristics of EGR-WI combined system. The water injection system was statically characterized by recording the engine exhaust outlet $NO_x$ emissions for comparison with baseline $NO_x$ emissions. Effects of the water injection system on CO and HC emissions and fuel consumption were examined. The research engine used for these experiments was a 103 kW turbocharged, intercooled, 2.5 L VM Motori CIDI engine equipped with a cooled EGR system. Water injection in the intake system demonstrated the potential for significant reductions in engine outlet $NO_x$ emissions. The system has reduced engine outlet $NO_x$ emissions by 40-50%, but caused significant increases in CO and HC emissions, particularly at low loads. Fuel consumption effects were minimal.