• 센서학회지
• /
• 제19권3호
• /
• pp.176-183
• /
• 2010

It is considered that the urea injection DeNOx SCR(selective catalytic reduction) system is the only promising method to satisfy the worldwide NOx emission standards. As for the theoretical aspect, reactants of NO and $NO_2$ with $NH_3$ produce $H_2O$, $N_2$ and $O_2$ which do not harm human beings and environmental as well. The realization of maximum NOx conversion (without using a post oxidation catalyst) is only possible with closed loop controlled urea dosing. It means built-in $NH_3$ gas sensor have to be developed for detecting accurate $NH_3$ concentration for the feedback system. Using YSZ(yttria-stabilized zirconia) as a solid state electrolyte and $In_2O_3$ as a sensing material, this paper aims to study dependable $NH_3$ gas sensor for the promising solution of DeNOx technology, which have a reproducible electric output signal, a high sensitivity and fast response.

• 센서학회지
• /
• 제4권2호
• /
• pp.58-63
• /
• 1995

$SiH_{4}$와 $NH_{3}$의 RF 글로우방전 분해에 의한 PECVD법으로 a-SiNx:H박막을 제조하고 기판온도, RF 전력, 그리고 $NH_{3}/SiH_{4}$ 유량비 등의 변화에 따른 a-SiNx:H 박막의 유전상수와 광학적 밴드갭 등을 조사하였다. a-SiNx:H막의 유전상수와 광학적 밴드갭은 기판온도, RF 전력 및 $NH_{3}/SiH_{4}$ 유량비 등의 증착변수에 따라 크게 변화하였다. 기판온도가 증가할수록 a-SiNx:H막의 유전상수는 증가하였으며 광학적 밴드갭은 감소하였다. 기판온도, RF 전력, 가스압력, $NH_{3}/SiH_{4}$ 유량비 및 두께를 각각 $250^{\circ}C$, 20 W, 500 mTorr, 10 및 $1500\;{\AA}$로 하였을 때 a-SiNx:H막의 유전상수, 절연파괴전장 및 광학적 밴드갭은 각각 4.3, 1 MV/cm 및 2.9 eV로 나타났다.

• 마이크로전자및패키징학회지
• /
• 제11권4호
• /
• pp.29-35
• /
• 2004

암모니아 펄스플라즈마를 이용하여 $WF_6$ 가스와 $NH_3$ 가스를 교대로 흘려줌으로써 Si 기판위에 질화텅스텐 확산방지막을 증착하였다. $WF_6$ 가스는 Si과 반응하여 표면침식이 과도히 발생하였으나 암모니아 ($NH_3$)가스를 펄스 플라즈마를 인가하여 $WF_6$와 같이 사용하면 Si 표면을 질화처리 함으로써 표면침식을 막아주며 질화텅스텐 박막을 쉽게 증착할 수 있었다. 그 이유는 암모니아 가스의 분해를 통한 Si 기판의 흡착을 용이하게 하여 질화텅스텐 박막 증착이 가능하기 때문이다. 이러한 증착 미케니즘과 암모니아 펄스 플라즈마 효과에 대하여 조사하였다.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2001년도 제18차 정기총회 및 학술발표 PROCEEDINGS
• /
• pp.86-88
• /
• 2001

본 시험은 broiler performance, litter N농도가 어떻게 유지되며, NH3 gas 농도가 사료에 ammino acid와 Vitamin D를 보충하여 litter에 Alum을 첨가하여 저수준 단백질 수준을 감소시키는지 결정하기 위해 실시하였다. 이 실험은 각각 처리마다 3반복 90마리를 세가지의 다른 단백질 수준을 가지고서 starter period(1-214)와 grower period(22-420)로 나누었다. 단백질처리는 각기 starter에는 평균 23.0(control 71), 20.4(W)와 18.0(73)%로 grower에서는 21.0(control 71), l9.3(n) and 17.o(73)%로 구성된다. control과 비교하면 ammino acid 수준은 비슷하다. Alum은 rice bran kg당 2009에 Control을 제외하고 각 처리구에 혼합했다. 결과는 3wks와 6wks 동안 급여한 사료에서 Control이하인 저수준 단백질은 feed gain은 증가하였으며, feed intake와 weight gain은 감소하였다. 그러나 처리간에는 유의차(P<0.05)가 없었으며 Alum을 litter에 혼합할 때(P<0.05) 저수준 단백질은 NH3 gas농도가 74.8-80.9% 감소되었다. litter에 Alum을 첨가하는 조작은 NH3 gas농도를 감소시킨다는 것을 보여준다.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.782-785
• /
• 2013

Multi-walled carbon nanotubes were synthesized on Ni catalyst using thermal chemical vapor deposition. By introducing ammonia gas during the CNT synthesis process, clean and vertically aligned CNTs without impurities could be prepared. As the ammonia gas increased a partial pressure of hydrogen in the mixed gas during the CNT synthesis process, we could control the CNT synthesis rate appropriately. As the ammonia gas has an etching ability, amorphous carbon species covering the catalyst particles were effectively removed. Therefore catalyst particles could maintain their catalytic state actively during the synthesis process. Finally, we could obtain clean and vertically aligned CNTs by introducing $NH_3$ gas during the CNT synthesis process.

• 청정기술
• /
• 제14권2호
• /
• pp.117-122
• /
• 2008

중발열량 석탄 합성가스의 연소 및 NOx 발생 특성에 대한 이론적 해석을 수행하였다. 석탄 합성가스는 CO, $H_2,\;CO_2,\;N_2$가 주성분이고, 미량의 $CH_4$ 및 $NH_3$를 함유하는 것으로 가정하였다. 열화학적 해석을 통해 합성가스 연소 시의 화염 온도, 배기가스의 주요 및 부차적 화학종들의 조성, 열 및 연료 NOx 발생량을 계산하였다. 또한 합성가스 중의 $CH_4$ 및 $NH_3$ 성분이 연소 및 NOx 발생에 미치는 영향을 검토하였다. 본 석탄 합성가스들의 계산결과들을 토대로 가스터빈 연소기의 NOx 저감 설계에 필요한 기본 방향과 기준을 제시하였다.

• 환경위생공학
• /
• 제11권1호
• /
• pp.9-15
• /
• 1996

The purpose of this study was to evaluate the decomposition efficiency of $NH_3$ odor gas using high frequency surface discharge body. The results from this study are as follows; 1, Voltage and frequency of electric elements have effects on removal of $NH_3$ odor. The higher these two elements were set up, the more efficiently deodorizing processing worked. In this experiment, the optimum voltage and frequency applicable were observed around AC 6.0 kVp-p and 24.0 kHz respectively. 2. The temperature, humidity and residence time were observed strong variables for NH$_3$ removal process. Its performance had limits at high temperature and humidity conditions. The longer the residence time continued, the more efficiently deodorization process worked. The experimental results showed that the deodorization was efficiently processed under such conditions as $30.0^{\circ}C$ in temperature, 60rh% in humidity and 0.3 sec in residence time. 3. It was observed that in deodorization experiment, $NH_3$ odor gas was perfectly decomposed under the concentration condition below 15.0ppm. Moreover it was considered as economic and practical in terms of maintenance cost when compared with other deodorization methods.

• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.200-204
• /
• 2011

Increase of surface area and decrease of band gap in $TiO_2$ semiconductors are significant to improve the efficiency of water splitting by photoelectrolysis. In this study $TiO_2$ nanotube arrays with ~7 um length and ~100 nm diameter were fabricated by an anodizing technique of titanium foils using DMSO (dimethyl sulfoxide)-based electrolytes. Then to control the band gap of the $TiO_2$ arrays, they were annealed at $550^{\circ}C$ for up to 180 min in $NH_3$ gas ambient. The samples annealed in $NH_3$ gas for 30 min and 60 min showed superior photo-conversion efficiency for water splitting under white and visible light. A $TiO_2$ nanotube annealed in $NH_3$ gas ambient for a period longer than 120 min showed 1 order higher leakage current. It is believed that the decrease of band gap and increase of conductivity in $TiO_2$ nanotube arrays due to $NH_3$ gas treatments result in the superior water-splitting performance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.406-409
• /
• 1999

Experimental Investigations were carried out to remove NOx, SOx simultaneously from simulated flue gas[NO(0.02%)-SO$_2$(0.08%)-$CO_2$-Air-$N_2$] by using a plasma chemical reaction. Ammonia gas(14.81%) balanced by argon was diluted by all and was Introduced to mall simulated flue gas duct through NH$_3$ Injection system which is in downstream of reactor. The NH$_3$ molecular ratio(MR) was determined based on (NH3) to [NO+S0$_2$]. MR is 1, 1.5, 2.5. The NOx removal rate significantly increased with increasing NaOH bubble quantity. The SO$_2$ removal rate was not significantly effected by applied voltage, however it fairly Increased with increasing NH$_3$ molecule ratio. By-product aerosol particle was observed by XRD(X-ray diffraction) after sampling, The NOx, SOx removal rates, when H2O vapour bubbled by dry all was injected to plasma reactor, were better than those of other cases. When aqueous NaOH solution(20%) bubbled by 2.5( ι /min) of $N_2$ and 0.5 ( ι /min) NH$_3$(MR=1.5) were injected to simulated flue gas, The NOx. SOx removal rate was 95 ~ 100[%]

• 한국세라믹학회지
• /
• 제37권1호
• /
• pp.44-49
• /
• 2000

Silicon nitride powders, were synthesized by the vapor phase reaction using SiH4-NH3 gaseous mixture. The reaction temperature, ratio of NH3 to SiH4 gas and the overall gas quantity were varied. The synthesized powders were characterized using X-ray, TEM, FT-IR and EA. The synthesized silicon nitride powders were in amorphous state, and the average particle size was about 100nm. TEM analysis revealed that the particle size decreased with increasing reaction temperature and gas flow quantity. As-received amorphous powders were annealed in nitrogen atmosphere at 140$0^{\circ}C$ for 2h, then the powders were completely crystallized at 0.2 ratio of NH3 to SiH4.