• 제목/요약/키워드: $NH_3$ gas

검색결과 804건 처리시간 0.034초

플라즈마 산화와 암모니아 SCR 복합탈질공정의 엔진적용 연구 (A Study on a Combined DeNOx Process of Plasma Oxidation and $NH_3$ SCR for Diesel Engine)

  • 송영훈;이재옥;차민석;김석준;류정인
    • 한국연소학회지
    • /
    • 제12권4호
    • /
    • pp.39-46
    • /
    • 2007
  • The technique of $NH_3$ SCR (selective catalytic reduction) assisted by plasma oxidation has been applied to a 2,000 cc diesel engine. The present combined $deNO_x$ process consists of two steps. The first step is that about 50% of emitted NO from the engine is oxidized to $NO_2$ in a plasma oxidation process. The second step is that NO and $NO_2$ are simultaneously reduced to $N_2$ in the $NH_3$ SCR process. The engine test results showed that the $deNO_x$ rates of the present combined process are higher than those of conventional SCR process by 20%. Such a high performance of the combined process is noticeable especially, when the exhaust temperature are relatively low, i.e., $170-220^{\circ}C$. To provide a feasibility of the present technique the effects of operating conditions, such as an electrical input energy, an exhaust gas temperature, an initial NO concentration, and the amount of hydrocarbon addition, were discussed.

  • PDF

Raman 분광법에 의한 GaN OMVPE 전구체들의 열분해에 관한 연구 (Investigation of the pyrolysis of GaN OMVPE precursors by Raman spectroscopy)

  • 이순애;김유택;신무환;신건철;박진호
    • 한국결정성장학회지
    • /
    • 제10권2호
    • /
    • pp.116-121
    • /
    • 2000
  • 도립형 OMVPE 반응기 내부의 기상 온도분포와 OMVPE 전구체들의 농도분포를 in-situ Raman 분광법으로 조사하였다. 운반기체의 회전 Raman 스펙트럼 분석을 통해 반응기 내부의 온도 분포를 측정하였고, 기판 근처에 수직적 온도 구배가 형성됨을 확인할 수 있었다. 또한 진동 Raman 스펙트럼 해석으로부터 전구체의 열분해도를 관찰살 수 있었다. $NH_3$의 경우 800 K 근처에서, TMGa의 경우 650 K 근처에서 열분해가 시작됨을 알 수 있었고, 기판에 매우 근접한 지역에서도 상당량의 전구체가 분해되지 않은 상태로 잔류함을 알 수 있었다.

  • PDF

서울 관악산 대기 중의 $SF_6$에 관한 연구 (Atmospheric Sulfur Hexafluoride $(SF_6)$ near the Kwanak Mountain, Seoul)

  • 이정현;김경렬
    • 대기
    • /
    • 제18권3호
    • /
    • pp.225-235
    • /
    • 2008
  • Sulfur hexafluoride ($SF_6$), man-made compound, has been paid attention as a potent greenhouse gas. After Kyoto Pototcol on Climate Change in 1997, nations established the policy aimed at minimizing release of $SF_6$ to atmosphere. We have developed and operated an automatic analytical system for monitoring atmospheric $SF_6$ using gas chromatography with electron capture detector (GC-ECD) and packed separate-column. Here, we report and discuss 4-month record of atmospheric $SF_6$ concentrations monitored at Seoul National University (SNU) pilot station near the Kwanak Mountain, Seoul. Most of observed $SF_6$ concentrations were excessively high compared with Northern Hemisphere (NH) background trend obtained from National Oceanic and Atmospheric Administration (NOAA) Earth System Research Laboratory (ESRL) monitoring stations. And the observed $SF_6$ showed extremely wide variability ranging from 4.6 pptv to $1.1{\times}10^3$ pptv, which may be affected by local sources placed nearby. Simultaneous wind data with $SF_6$ measurements show that relatively high values of $SF_6$ correspond to weak wind as well as southerly. There are many engineering installations to the south of the station. The regional value of the atmospheric $SF_6$ estimated from the data selection by wind conditions is about 6.8 pptv. This value, which is similar to concentrations of urban areas, is higher than NH background concentration.

SCR facility design for the selective catalyst performance of mixed gas

  • Woohyeon, Hwang;Kyung-Ok, Lee
    • 한국컴퓨터정보학회논문지
    • /
    • 제28권1호
    • /
    • pp.121-127
    • /
    • 2023
  • 본 연구에서는 질소화합물을 최적으로 줄일 수 있는 SCR에서 설계 조건과 CFD 해석 결과를 비교해 검토하고자 한다. 이를 위해 보일러의 쉘과 튜브 영역에 대해 설계 기준을 만족하고 있는지 CFD을 이용하여 해석하고 비교하였다. SCR 시스템에서 해석영역은 쉘 측은 가스·공기 열교환기 입구에서 출구까지이고, 튜브 측은 가스·공기 열교환기의 8개 튜브로 설정하였다. CFD 해석을 통해 SCR 시스템의 1차 촉매 면에서 가스의 속도 분포는 2.7%로 설계되었고, NH3/NOx 몰비 분포는 3.7%로 설계 기준을 만족하였다. 또한, 온도 분포의 균일성을 확인하였고 요구 조건인 260℃ 이상을 만족하였다. 촉매에 유입되는 가스의 각도는 2.9도로 설계 조건을 충족하였고, 그리고 발생하는 압력손실도 설계 요구조건을 만족하였다. 이러한 CFD 해석을 통해 각 영역별로 요구되는 설계조건을 만족하여 설계되어 최적으로 운전되고 있음을 확인하였다.

RF Magnetron Sputtering 법으로 제조된 $LaFeO_3$ 박막의 가스감지 특성 (Gas sensing properties of $LaFeO_3$ thin films fabricated by RF magnetron sputtering method)

  • 장재영;마대영;박기철;김정규
    • 센서학회지
    • /
    • 제9권5호
    • /
    • pp.357-364
    • /
    • 2000
  • R.F. magnetron sputtering에 의해 $Al_2O_3$ 기판상에 $LaFeO_3$ 박막을 증착하고 막의 구조적, 전기적 및 가스감도 특성을 조사하였다. $600^{\circ}C$ 이상에서 열처리 된 박막에서 (121) 방향의 주결정상을 확인할 수 있었고 가스감지특성에서 박막은 p형 반도체의 특성을 보였다. 박막의 두께 및 열처리 온도의 변화에 대하여, 감도는 박막의 두께변화에는 둔감하였지만 열처리온도에는 큰 변화를 보였다. $800^{\circ}C$에서 열처리된 두께 400 nm의 박막에서 동작온도가 $300^{\circ}C$일때 5000 ppm의 CO 가스에 대해서는 약 400%, 350 ppm의 $NH_3$ 가스에서는 약 60%의 감도를 보였다.

  • PDF

유동층 CO2 회수공정을 위한 흡수제의 흡수 및 재생특성 (Absorption and Regeneration Characteristics of a Sorbent for Fluidized-Bed CO2 Removal Process)

  • 이창근;홍선욱;조성호;손재익;최정후
    • Korean Chemical Engineering Research
    • /
    • 제43권2호
    • /
    • pp.294-298
    • /
    • 2005
  • 연소기체로부터 이산화탄소를 흡수하는 유동층 공정에 사용되는 흡수제의 흡수 및 재생 반응특성을 측정 및 고찰하였다. 유동층 공정을 위해서 제조된 흡수제 Sorb NH의 흡수 및 재생 반응속도는 순수한 $Na_2CO_3$보다 더 빨랐다. 흡수 반응에서 Sorb NH의 겉보기 활성화에너지는 -10,100 cal/g mol, 순수한 $Na_2CO_3$의 겉보기 활성화에너지는 -12,200cal/g mol이었다. 재생반응에서 Sorb NH의 겉보기 활성화에너지는 약 12,050 cal/g mol, 순수한 $Na_2CO_3$의 활성화에너지는 약 11,320 cal/g mol이었다.

Bacillus subtilis IB101을 이용한 암모니아 가스 제거 및 생산배지 최적화 (Ammonia Gas Removal by Bacillus subtilis IB101 and Dctimization of Culture Media)

  • 김소영;노용호;강성각;김영범;장우진;김동준;윤현식
    • KSBB Journal
    • /
    • 제22권3호
    • /
    • pp.162-167
    • /
    • 2007
  • 암모니아 가스는 환경오염 중 가장 피해가 큰 물질로 가축 뿐만 아니라 사람에게도 많은 피해를 준다. 본 연구의 목적은 Bacillus subtilis IB101을 이용하여 암모니아 가스의 제거효율이 좋은 조건과 최적으로 배양할 수 있는 생산배지의 최적화에 대하여 알아보는 것이다. 암모니아 제거 효과가 우수한 균주인 B. subtilis IB101의 암모니아 가스 제거 효능이 좋은 성장단계를 알아보았으며, 기본배지의 구성성분 중 $(NH_4)_2SO_4$의 농도에 변화를 주어 각각 다른 $(NH_4)_2SO_4$ 농도의 배지에서 배양된 cell이 암모니아 가스 제거에 미치는 영향을 알아보았다. 그리고 온도 및 pH에 따른 암모니아 가스 제거 효능의 최적조건을 알아보았다. B. subtilis IB101의 대량 배양을 위한 배지 조성을 얻기 위하여 Placket-Burman design과 one factor at a time method를 이용하여 기본배지의 구성성분의 영향에 대하여 살펴보고 최적의 배지조성을 알아보았다. Exponential phase 단계인 B. subtilis IB101을 접종한 것이 stationary phase 단계인 B. subtilis IB101을 접종한 것보다 암모니아 가스 제거 효율이 약 20% 정도 우수하였다. 30$^{\circ}C$, pH 4의 배양조건에서 암모니아 가스 제거 효율이 가장 높았다. 기본 배지 구성성분 중 $(NH_4)_2SO_4$의 농도의 변화에 따른 암모니아 가스 제거 효율에는 영향이 없었다. 최적화된 배지의 구성 성분은 yeast extract 10 g/l, soluble starch 2.5 g/1, $MgSO_4$ 6 g/l, $CaCl_2$ 1.55 g/1, $(NH_4)_2SO_4$ 5 g/1, $KH_2PO_4$ 0.75 g/l, 대두분 8 g/l이었다.

The conversion of ammonium uranate prepared via sol-gel synthesis into uranium oxides

  • Schreinemachers, Christian;Leinders, Gregory;Modolo, Giuseppe;Verwerft, Marc;Binnemans, Koen;Cardinaels, Thomas
    • Nuclear Engineering and Technology
    • /
    • 제52권5호
    • /
    • pp.1013-1021
    • /
    • 2020
  • A combination of simultaneous thermal analysis, evolved gas analysis and non-ambient XRD techniques was used to characterise and investigate the conversion reactions of ammonium uranates into uranium oxides. Two solid phases of the ternary system NH3 - UO3 - H2O were synthesised under specified conditions. Microspheres prepared by the sol-gel method via internal gelation were identified as 3UO3·2NH3·4H2O, whereas the product of a typical ammonium diuranate precipitation reaction was associated to the composition 3UO3·NH3·5H2O. The thermal decomposition profile of both compounds in air feature distinct reaction steps towards the conversion to U3O8, owing to the successive release of water and ammonia molecules. Both compounds are converted into α-U3O8 above 550 ℃, but the crystallographic transition occurs differently. In compound 3UO3·NH3·5H2O (ADU) the transformation occurs via the crystalline β-UO3 phase, whereas in compound 3UO3·2NH3·4H2O (microspheres) an amorphous UO3 intermediate was observed. The new insights obtained on these uranate systems improve the information base for designing and synthesising minor actinide-containing target materials in future applications.

혼합가스 식별을 위한 반도체식 가스센서의 온라인 드리프트 보상 (On-line drift compensation of a tin oxide gas sensor for identification of gas mixtures)

  • 신중엽;조정환;전기준
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.130-132
    • /
    • 2005
  • This paper presents two ART-based neural networks for the identification of gas mixtures subject to the drift. A fuzzy ARTMAP neural network is used for classifying $H_2S$, $NH_3$ and their mixture gases including a reference gas. The other fuzzy ART neural network is utilized to detect the drift of a tin oxide gas sensor by tracking a cluster center of the reference gas. After detecting the drift, the previous cluster center of each gas is updated as much as the drift of the reference gas. By the simulations, the proposed method is shown to compensate the drift on-line without making many categories of target gases compared with the previous studies.

  • PDF

Numerical Modeling for GaN Deposition by MOCVD: Effects of the Gas Inlet

  • Yang, Wonkyun;Joo, Junghoon
    • Applied Science and Convergence Technology
    • /
    • 제23권3호
    • /
    • pp.139-144
    • /
    • 2014
  • GaN deposition equipment and processes for the fabrication of white LEDs (Light Emitting Diode) using MOCVD (Metal Organic Chemical Vapor Deposition) were numerically modeled to analyze the effects of a reactive gas introduction strategy. The source gases, TMGa and $NH_3$, were injected from a shower head at the top of the chamber; the carrier gases, $H_2$ or $N_2$, were introduced using two types of injection structures: vertical and horizontal. Wafers sat on the holder at a radial distance between 100 mm and 150 mm. The non-uniformity of the deposition rates for vertical and horizontal injection were 4.3% and 3.1%, respectively. In the case of using $H_2$ as a carrier gas instead of $N_2$, the uniform deposition zone was increased by 20%.