• 제목/요약/키워드: $NH_3$ gas

검색결과 801건 처리시간 0.025초

저온 플라즈마와 $NH_3$ SCR 복합공정을 이용한 디젤엔진 배기가스의 NOx 저감 기술 (Non-thermal Plasma and $NH_3$ SCR Hybrid Process for Treating Diesel Engine Exhaust)

  • 차민석;이재옥;김용호;송영훈
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
    • /
    • pp.89-95
    • /
    • 2002
  • A hybrid De- NOx technique of non-thermal plasma and $NH_3$ SCR process has been investigated to remove NOx from 300 hp marine engine exhaust under the low temperature conditions, i.e. $100-200^{\circ}C$. Fundamental investigation with Diesel-like simulant gas was also conducted. The performance of the present technique has been demonstrated by treating real diesel exhaust gases, in which high contents of soot, water vapor, $SO_2$, NOx, and unburned HC are included. Detailed engineering data for evaluating the feasibility of the technique are provided in the present investigation.

  • PDF

과열도 변화에 의한 $NH_3$ 냉동장치의 성능특성 연구 (The Study on Performance Characteristics due to the Superheat Temperature of $NH_3$ Refrigeration System)

  • 전상신;권일욱;하옥남
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.1334-1339
    • /
    • 2004
  • Nowadays CFCs and HCFCs refrigerants are restricted because it cause depletion of ozone layer. Accordingly, this experiment apply the $NH_3$ gas and not CFCs and HCFCs for refrigerant to study the performance characteristic from the superheat control and improve the energy efficiency from the high performance. The condensing pressure of refrigeration system is increased from 14.5bar to 16bar by 0.5bar and superheat temperature is increased from $0^{\circ}C$ to $10^{\circ}C$ by $1^{\circ}C$ at each condensing pressure. As the result of experiment, when the superheat temperature is $1^{\circ}C$ at each condensing pressure, the refrigeration system has the high performance.

  • PDF

Exhaust Plasma Characteristics of Direct-Current Arcjet Thrusters

  • Tahara, Hirokazu
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2004년도 제22회 춘계학술대회논문집
    • /
    • pp.327-334
    • /
    • 2004
  • Spectroscopic and electrostatic probe measurements were made to examine plasma characteristics with or without a metal plate for a 10-㎾-class direct-current arcjet Heat fluxes into the plate from the plasma were also evaluated with a Nickel slug and thermocouple arrangement. Ammonia and mixtures of nitrogen and hydrogen were used. The NH$_3$ and $N_2$+3H$_2$ plasmas in the nozzle and in the downstream plume without a plate were in thermodynamical nonequilibrium states. As a result, the H-atom electronic excitation temperature and the $N_2$ molecule-rotational excitation temperature intensively decreased downstream in the nozzle although the NH molecule-rotational excitation temperature did not show an axial decrease. Each temperature was kept in a small range in the plume without a plate except for the NH rotational temperature for NH$_3$ gas. On the other hand, as approaching the plate, the thermodynamical nonequilibrium plasma came to be a temperature-equilibrium one because the plasma flow tended to stagnate in front of the plate. The electron temperature had a small radial variation near the plate. Both the electron number density and the heat flux decreased radially outward, and an increase in H$_2$ mole fraction raised them at a constant radial position. In cases with NH$_3$ and $N_2$+3H$_2$ a large number of NH radical with a radially wide distribution was considered to cause a large amount of energy loss, i.e., frozen flow loss, for arcjet thrusters.

  • PDF

고온호기성 소화공정 배가스 처리를 위한 바이오필터 성능평가 (Performance Evaluation of Biofilter Treating Autothermal Thermophilic Aerobic Digestion Offgas)

  • 배병욱;최기승
    • 한국물환경학회지
    • /
    • 제26권5호
    • /
    • pp.732-739
    • /
    • 2010
  • Two combined autothermal thermophilic aerobic digestion (ATAD) and biofilter (BF) systems were operated to treat the piggery wastewater and the ammonia offgas. Experimental results indicated that the organic removal efficiency of ATAD-2, operated with oxygen, was higher than that of ATAD-1, operated with air. The concentration of ammonia in ATAD-2 offgas was higher compared to ATAD-1 offgas, but the total amount of ammonia produced from ATAD-2 was less than that from ATAD-1 due to the lower oxygen flowrate. The ammonia gas produced from both ATAD reactors was successfully removed by the BF. The BF-1, connected with ATAD-1, removed 93% of ammonia at the loading rate of $9.4g\;NH_3-N/m^3/hr$. The BF-2, connected with ATAD-2, removed 95% of ammonia gas at the loading rate of $8.1g\;NH_3-N/m^3/hr$. As the nitrification process continued, pH value of recirculating solution continuously decreased due to the accumulation of nitrate. When the ammonia loading rate was less than $22.7g\;NH_3-N/m^3/h$, the proper replacing cycle of recirculating solution was in the range of 10 to 11 days. Almost 90% of total mass of nitrogen fed into the each BF was confirmed from the mass balance on nitrogen.

화학기상공정을 이용한 나노질화알루미늄 분말 합성 (Synthesis of Nano-size Aluminum Nitride Powders by Chemical Vapor Process)

  • 피재환;박종철;김유진;황광택;김수룡
    • 한국분말재료학회지
    • /
    • 제15권6호
    • /
    • pp.496-502
    • /
    • 2008
  • Aluminum nitride (AlN) powders were prepared by the chemical vapor synthesis (CVS) process in the $AlCl_{3}-NH_{3}-N_{2}$ system. Aluminum chloride ($AlCl_3$) as the starting material was gasified in the heating chamber of $300^{\circ}C$. Aluminum chloride gas transported to the furnace in $NH_{3}-N_{2}$ atmosphere at the gas flow rate of 200-400ml/min. For samples synthesized between 700 and $1200^{\circ}C$, the XRD peaks corresponding to AlN were comparatively sharp and also showed an improvement of crystallinity with increasing the reaction temperature. In additions, the average particle size of the AlN powders decreased from 250 to 40 nm, as the reaction temperature increased.

가스센서를 활용한 암모니아 가스의 실시간 흡수 효율 평가에 관한 연구 (The Study on the Realtime Evaluation of NH3 Absorption Efficiency Using Chemical Gas Sensor)

  • 임정진;김한수;김선태
    • 대한환경공학회지
    • /
    • 제35권4호
    • /
    • pp.233-239
    • /
    • 2013
  • 본 연구에서는 실험실 규모의 스크러버 전단과 후단에 설치된 가스센서의 출력값으로부터 흡수제의 실시간 흡수효율을 평가하기 위한 연구를 진행하였다. 스크러버 전단과 후단에 설치된 가스센서는 센서표면에서의 가스 흡 탈착반응으로 발생되는 전기적인 변화를 출력신호로 나타내는 측정장치이며, 스크러버의 흡수제와 암모니아 가스와의 반응시간(3시간, 6시간 및 12시간)에 따른 암모니아 가스의 흡수량을 산출하였다. 또한 가스센서의 출력값으로부터 산출된 암모니아 흡수량을 기존의 암모니아 분석방법인 인도페놀법에 의한 흡수량 산정방법과 비교해 보았으며, 약 20%의 차이를 보이긴 하나 0.99 이상의 높은 상관성을 보이고 있음을 확인하였다. 또한, 반응시간에 따른 pH와 흡수량과의 높은 상관성을 확인할 수 있었으며, 흡수제에 대한 암모니아 흡수량을 실시간으로 파악함으로써 흡수제의 파과시간을 예측할 수 있었다. 향후 다양한 연구를 통하여 악취배출시설의 스크러버에 이와 같은 가스센서를 적용하여 흡수제의 흡수 효율을 실시간으로 평가하여 교체주기 및 효율 등을 실시간으로 평가할 수 있는 시스템으로 발전이 가능함을 확인하였다.

휴대용 다중 가스측정 장비 개발 및 평가 (Development and Evaluation of Portable Multiple Gas Meter)

  • 장희중;김응식;박종열
    • 한국산학기술학회논문지
    • /
    • 제20권3호
    • /
    • pp.483-490
    • /
    • 2019
  • 화재 발생으로 인한 피해 및 영향에 관해 국내에서의 연구는 미비한 상태이다. 따라서 화재 발생에 따른 연기 농도를 측정하기 위한 기기를 개발함으로 연기가 주변 지역으로 확산될 경우의 농도를 측정하고자 한다. 본 논문에서 제안한 공기질 측정 시스템은 기존의 측정기와는 달리 CO, CO2, NOx VOCs, NH3 등 총 5가지의 가스를 동시에 측정할 수 있고, 센서보호 알고리즘을 통해 높은 내구 수명을 갖는다. 또한, 모니터링 프로그램을 통해 실시간 가스 변화량을 측정하는 시스템을 구성하였다. 상용 가스 분석기와의 비교를 통해 가스농도 측정의 신뢰성을 확보하였으며, 실내 및 실외 화재실험을 통해 발화점 주변에 존재하는 가스농도 평가를 실시하여 신뢰성이 높은 데이터를 얻을 수 있음을 확인하였다.

$NH_3$ 가스분위기에서 Mechanical Alloying에 의한 질화철의 합성 및 자성 (Formation ani Magnetic Properties of Iron-Nitrides due to Mechanical Alloying in $NH_3$ gas Atomosphere)

  • 이충효;고곡야유;소병문;홍진웅
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 하계학술대회 논문집 C
    • /
    • pp.1333-1335
    • /
    • 1994
  • The nitrification of pure iron powders is found to occur even at room temperature by high energy ball milling in $NH_3$ gas atmosphere. The powders of metastable iron nitrides ($0<at.%N{\le}23.3$) thus produced are identified as the super-saturated bee structure for the N content below 14.9 at.%N and the high temperature phase of the hcp structure above 19.4 at.%N. The atomic volume of Fe in the bcc phase is found to be smaller than that of the N-martensite reported in the literature. Magnetization at room temperature gradually decreases with increasing the N concentration in contrast to the enhancement reported for the bet nitrides. Neutron diffraction experiment also provide detailed information about the local structure surrounding the nitrogen atom. The coordination number of Fe atom around a nitrogen atom for the iron nitride containing 9.5 at.%N turns out to be 3.9 atoms.

  • PDF

열간가공 공구강에 형성된 침질탄화층의 잔류응력 측정 (Measurements of Residual Stress in Nitrocarburised Layer Formed in Hot Work Tool Steel)

  • 오도원;박기원;이준범;이상윤
    • 열처리공학회지
    • /
    • 제11권4호
    • /
    • pp.305-314
    • /
    • 1998
  • This study has been performed to investigate into some effects of various amounts of $CO_2$ and CO gas added to the $50%NH_3-N_2$ based gas atmosphere on microstructure, hardness, chemical analysis and residual stress in the compound and diffusion layer of AISI H13 treated by gaseous nitrocarburising process. The compound layer formed in the surface is composed of mainly ${\varepsilon}-Fe_3$(N,C) and small amount of ${\gamma}^{\prime}-Fe_4N$ and cementite. The maximum hardness value obtainable from H13 steel is shown to be 1200 Hv and the effecvtive hardening depth increases with increasing CO content from 1% to 4%. In the case of CO content over 4%, however, it decreases with increasing CO content. The composition profiles of nitrogen and carbon are found to be within the ${\varepsilon}$-phase field located above the ${\varepsilon}+{\gamma}^{\prime}$ phase field in the Fe-N-C diagram. It is shown that the maximum value of compressive residual stress of H13 steel treated in atmospheres of $50%NH_3-(2,4)%CO_2-N_2-CO$ gas mixture is $48kg/mm^2$ and the depth to which residual stress is in Compressive state is $90{\mu}m$ for the atmosphere $50%NH_3-45%N_2-4%CO_2-1%CO$ gas mixture. It is consequently important to control the maximum value and size of compressive residual stress region in order to obtain desirable mechanical properties.

  • PDF

스윕 가스-진공 하이브리드식 탈기막 공정을 활용한 암모니아 폐수처리 및 선택적 회수 (Ammonia Wastewater Treatment and Selective Recovery Using a Sweep Gas-Vacuum Hybrid Type Membrane Degassing Process)

  • 윤홍식;민태진;전민규;임성일;오세철;류경하;이충성;강보식
    • 한국산업융합학회 논문집
    • /
    • 제26권6_2호
    • /
    • pp.1171-1181
    • /
    • 2023
  • In this study, a sweep gas - vacuum hybrid type membrane degassing process was proposed for ammonia wastewater treatment. In addition, the ammonia selective recovery of the hybrid type membrane degassing process was also investigated. As a result, the hybrid type membrane degassing process showed better degassing performance (54.9 mg NH3/m2min for 360 min) than the sweep gas type (32.3 mg NH3/m2min) or vacuum type (22 mg NH3/m2min). Additionally, the hybrid type membrane degassing process showed an excellent ammonia selectivity (103 times compared to Na+ Na+, 133 times compared to Ca2+). The ammonia selectivity was appeared to be due to the conversion characteristics of ammonium ion / dissolved ammonia depending on pH. The results in this study are expected to be used in the development of ammonia wastewater treatment and ammonia recovery in the future.