• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.3
• /
• pp.112-117
• /
• 2017

Ion exchange fiber, PADD was synthesized by the reaction between PAN based acrylic fiber and DETA with $AlCl_3{\cdot}6H_2O$, and was analyzed by FT-IR and SEM to investigate its characteristics. The experimental results of Cr(VI) removal by PADD were better fitted with Langmuir adsorption isotherm, and the maximum uptake value ($Q_{max}$) was calculated to be 6.93 mmol/g. The kinetic data can be well described by Lagergen pseudo-second order rate model. The Cr(VI) adsorption capacity of PADD was 4.11 mmol/g at pH 2, which shows the effect of pH changes on the removal of Cr(VI). The adsorption selectivity of Cr(VI) was higher than phosphate and As(V). Total ion exchange capacity of PADD was 4.70 mmol/g, which was measured by acid-base back titration.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.261-267
• /
• 2011

ACKGROUND: Cadmium (Cd) has long been recognized as one of most toxic elements. Application of organic amendments and phosphate fertilizers can decrease the bioavailability of heavy metals in contaminated soil. METHODS AND RESULTS: This study was conducted to evaluate effect of combined application of phosphate fertilizer and manure in reducing cadmium phytoavailability in heavy metal contaminated soil. Phosphate fertilizers [Fused and super phosphate (FSP) and $K_2HPO_4$ (DPP)] and manure (M) were applied as single application (FSP, DPP, and M) to combined application (FSP+M and DPP+M) before radish seeding. $K_2HPO_4$ decreased $NH_4OAc$ extractable Cd and plant Cd concentration, mainly due to increases in soil pH and negative charge. However, FSP increased $NH_4OAc$ extractable Cd and plant Cd concentration. Manure significantly increased soil pH and negative charge. Combined application of phosphate fertilizer and manure were much more effective in reducing Cd phytoavailability than a simple application of each component. Calculated solubility diagram indicated that Cd concentrations in the solution of soils amended with phosphate fertilizers and manure were undersaturated with respect to all potential Cd minerals [$Cd_3(PO_4)_2$, $CdCO_3$, $Cd(OH)_2$, and $CdHPO_4$]. Plant Cd concentration and $NH_4OAc$ extractable Cd were negatively related to soil pH and negative charge. CONCLUSION: Alleviation of Cd phytoavailability with phosphate fertilizer and manure can be attributed primarily to Cd immobilization due to the increase in soil pH and negative charge rather than Cd and phosphate precipitation. Therefore, combined application of alkaline phosphate materials and manure is effective for reducing Cd phytoavailability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.260-260
• /
• 2012

최근 IT산업의 급속한 발달로 모바일 제품과 반도체 및 IC 패키지 등의 전자제품의 소형화, 경량화 및 고성능화되어 가고 있다. 따라서 반도체 공정에서 단위소자의 고속화를 구현하기 위한 금속배선공정에 사용되는 금속재료가 최근에 최소 선폭을 갖는 디바이스에서는 구리를 배선 재료로 전환하고, 향후에는 모든 디바이스가 구리를 주요 배선재료로 사용할 것으로 예측되고 있다. 반도체 소자 공정 중 시료 표면 위에 형성되는 오염물은 파티클, 유기오염물, 금속 불순물 그리고 자연 산화막으로 나눌 수 있다. 구리 표면에 생성되는 부식생성물의 종류에는 CuO, $Cu_2O$, $Cu(OH)_2$, $CuCO_3{\cdot}Cu(OH)_2$와 같은 생성물들이 있다. 이러한 부식생성물이 구리박막 표면에 형성이 되면 성장된 구리박막의 특성을 저하시키게 된다. 이러한 다양한 오염물들을 제거하기 위해서 여러 가지 전처리 공정에 대한 연구가 보고되고 있다. 본 연구에서, 스퍼터 방식으로 구리를 증착한 웨이퍼 (Cu/Ti/Si) 를 대기 중에 노출시켜 자연 산화막을 성장시키고, 이 산화막과 대기로부터 흡착된 불순물을 제거하기 위해 계면 활성제인 TS-40A와 $NH_4OH$ 수용액을 사용하여 이들 수용액이 구리 표면층에 미치는 영향에 대해 조사 분석하였다. 사용된 TS-40A는 알칼리 탈지제로서 웨이퍼 표면의 유기물을 제거하는 역할을 하며, $NH_4OH$는 구리를 제거하는 부식액으로 산업현장에서 널리 사용되고 있다. 다양한 표면 전처리 조건에 따른 구리박막 표면의 형상 및 미시적 특성변화를 SEM과 AFM을 이용하여 관찰하였고, 표면의 화학구조 및 성분 변화를 관찰하기 위해 XPS를 측정하였으며, 전기적 특성변화를 관찰하기 위해 4-point prove를 사용하여 박막의 면저항을 측정하였다.

• Korean Journal of Food Science and Technology
• /
• v.33 no.3
• /
• pp.282-287
• /
• 2001

This study was carried out to investigate the difference of ginsenoside compositions in crude ginseng saponins prepared by five different methods including three new methods. Two known methods are hot methanol(MeOH) extraction/n-butanol(n-BuOH) fractionation and hot MeOH extraction/Diaion HP-20 adsorption/MeOH elution. Three new methods are hot MeOH extraction/cation AG 50W $absorption/H_2O$ elution/n-BuOH extraction, cool MeOH extraction/Diaion HP-20 adsorption/MeOH elution and direct extraction with ethyl acetate(EtOAc)/n-BuOH. Analysis of ginsenoside composition in the crude saponins by conventional HPLC/RI(Refractive Index) did not show great difference between methods except EtOAc/n-BuOH method. However, HPLC/ELSD (evaporative light scattering detector) employing gradient mobile phase afforded fine resolution of ginsenoside Rf, $Rg_1$ and $Rh_1$, and great difference of ginsenoside compositions between methods. LC/MS revealed that large amount of prosapogenins were produced during the pass through the cation exchange (AG 50W) column being strongly acidic. Six major ginsenosides such as $Rb_1,w;Rb_2,$ Rc, Rd, Re and $Rg_1$, 5 prosapogenins and one chikusetsusaponin were identified by LC/MS. A newly established HPLC method employing ODS column and gradient mobile phase of $KH_2PO_4/CH_3CN$ revealed that malonyl ginsenosides were detected only in the crude saponin obtained from cool MeOH extraction.

• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.59-63
• /
• 2012

The use of dry chemical powder has been increased as it can be stored for a long period and sustain in stable condition compared to gas or liquid phase extinguishing agents. A new type of dry chemical powder using Zeolite was produced in the research. Chemical powder was adsorbed into Zeolite 13X, a porous material appearing negative catalytic effect, to create extinguishing powder obtaining core shell structure and measured physical properties and run a small scale fire extinguishment. SEM, XRD, TA analysis was also executed, and extinguishing characteristics were measured by fire extinguishing experiment on oil pool fire. The experiment showed that the average particle size of Zeolite 13X was equivalent, indicating about $3{\pm}1{\mu}m$ and thermal analysis result illustrated that Zeolite 13X showed exothermic reaction peaks at $900^{\circ}C$ due to solid-state transformation. Extinguishing characteristics on oil fire of $NaHCO_3$/Zeolite 13X and $NH_4H_2PO_4$/Zeolite were improved, influenced by adsorbed extinguishing powders on Zeolite 13X and Zeolite 13X that contains high phase transition temperature.

• Korean Journal of Materials Research
• /
• v.6 no.2
• /
• pp.145-152
• /
• 1996

태양전지의 앞면전극으로 사용될 SnO2박막을 spray pyrolysis 방법으로 증착하여 증착조건에 따른 박막 특성을 연구하였다. 증착온도가 증가함에 따라 SnO2박막의 우선방위가 (200)면에서 면밀도가 더 높은 (211), (110)면으로 바뀌었고 막의 미세구조도 거칠고 각진 구조에서 평탄한 구조로 변하였다. 또한 더 안정된 결정면 성장과 온도 증가에 의해 CI, F 등의 불순물 흡착이 어려워져 전자 전하농도가 감소하고 비저항 값이 증가하였다. 특히 50$0^{\circ}C$ 이상에서는 전하농도가 크게 감소하여 비저항이 크게 증가하였다. NH4F/Sn=2.3인 용액으로 40$0^{\circ}C$에서 증착된 SnO2박막은 약 90%이상의 광투과도를 갖고 균일한 도핑으로 인해 약 4$\times$10-4$\Omega$ .cm의 낮은 비저항 값을 나타내었다. 두께에 따른 판저항과 광투과도의 상반된 효과를 고려한 figure of merit으로부터 투명전극으로써 가장 적절한 두께는 약 500nm이었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.646-646
• /
• 2013

그래핀은 이차원의 탄소 원자들이 벌집구조를 이루는 탄소 원자 한 층의 물질이다. 우수한 기계적, 전기적, 광학적 특성으로 인해 투명전극, 가스 센서, 트랜지스터 등과 같이 다양한 응용이 가능하고 연구가 행해지고 있다. 최근 몇 년 동안, 그래핀의 우수한 특성을 이용해서 마이크로센서나 신축성 있는 전자소자를 위한 전도막과 같은 응용이 시도되고 있다. 본 연구에서는 화학기상증착법 (CVD)으로 합성한 그래핀을 이용해서 암모니아 가스 센서 소자를 제작, 센서 특성을 관찰하였다. 구리 기판을 이용하여 화학기상증착법으로 그래핀을 합성하였으며 진공로에서 수소(H2)와 메탄(CH4) 가스를 사용하였다. 그래핀 합성 온도, 가스 유량 등을 변화시키며 그래핀을 합성하고, 합성된 그래핀을 구리기판을 식각용액을 이용해 제거하는 방법으로 그래핀을 전사시키는 공정거쳐 Au/Ni 전극패턴 위에 전사시킴으로 가스 센서 소자를 제작하였다. 제작된 센서 소자를 이용해 상온에서 암모니아(NH3) 가스의 유량을 변화시키며 실험하였다. 암모니아 가스가 흐를 때 그래핀에 암모니아 분자가 흡착되어 그래핀의 전기저항을 증가시켜 이를 이용해서 암모니아 가스를 감지할 수 있었다. 본 연구에서 제작한 소자는 상온에서 암모니아 가스에 민감하게 반응했으며 이는 기존의 금속산화물을 이용한 암모니아 센서는 대부분 고온에서 작동하는 점과 비교 하였을 때 가스 센서 소자로써 큰 장점이라고 할 수 있다.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.155-160
• /
• 2007

Constructed wetland has been widely used for the treatment of sewage, stormwater runoff, industrial wastewater, agricultural runoff, acid mine drainage and landfill leachate. For the removal of nitrogen and phosphorus, uptake by plants and adsorption to media material are the major processes, and, therefore, the selection of media with specific adsorption capacity is the critical factor for the optimal design of wetland along with the selection of appropriate plant species. In this study, two media materials (loess bead and mixed media) possessing different adsorption characteristics for ammonium and phosphate were selected, and their adsorption characteristics were evaluated. In addition, the performance of subsurface-flow wetland systems employing these media was evaluated in both batch and continuous flow systems. With LB medium, beter phosphorus removal was observed, while better ammonia removal was obtained with MM medium. In addition, enhanced removal efficiencies were observed in the wetland systems employing both media and aquatic plants, mainly due to the better environment for microbial growth. As a result, appropriate selection or combination of media with respect to the inflow water quality maybe important factors for the successful design and operation of wetland systems.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.6
• /
• pp.594-600
• /
• 2023

In this study, a process model and optimization design direction for a hydrogen production plant through ammonia decomposition are presented. If the reactor decomposition rate is designed to approach 100%, the amount of catalyst increases and the devices that make up the entire system also have a large design capacity. However, if the characteristics of the hydrogen regeneration process are reflected in the design of the reactor, it becomes possible to satisfy the total flow rate of fuel gas with the discharged tail gas flow rate. Analyzing the plant process simulation results, it was confirmed that when an appropriate decomposition rate is maintained in the reactor, the phenomenon of excess or shortage of fuel gas disappears. In addition, it became possible to reduce the amount of catalyst required and design the optimized capacity of the relevant processes.

• Applied Biological Chemistry
• /
• v.43 no.2
• /
• pp.124-129
• /
• 2000

Nitrogen and P in surface runoff and eroded sediment from cropland areas can contaminate streams and lakes. Runoff losses of N and P were determined in a small field plot $(14.3{\times}24.8\;m)$ of peach orchard from March to November in 1999. Nitrogen and P were applied in the rate of 172 and 46 kg/ha using chemical fertilizer and mixed oil cake fertilizer. During the season, in 26 rainfall events, $421.5\;m^3/ha$ of runoff including 1,989 kg/ha of soil loss was collected. Concentrations of total-N, $NO_3-N$, $NH_4-N$, total-P and $PO_4-P$ in runoff samples were in the range of $4.7{\sim}171.0,\;0.1{\sim}188.0,\;0.13{\sim}3.36$, $0.58{\sim}4.99$ and $0.05{\sim}3.71\;mg/l$, respectively. Total loss of N was 16.39 kg/ha and 75% of the loss was $NO_3-N$. Total loss of P was 1.04 kg/ha, and $PO_4-P$ and sediment bound P accounted for 47 and 27% of the total loss, respectively. The losses of N and P were about 9.5 and 2.3% of the applied N and P in the plot, respectively. Although the loss of N or P would be relatively small in agricultural aspect, considering the high concentrations of N and P in runoff, loss of N and P from croplands should be controlled to reduce the eutrophication problem of stream waters.