• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.713-716
• /
• 2001

In many papers, the electrochemical analysis of LiMn$_2$O$_4$shows the transition results of Mn$^{3+}$ ion. Charge ordering is accompanied by simultaneous orbital ordering due to the Jahn-Teller effect in Mnl$^{3+}$ ions. To analyze the cycle performance of LiMn$_{2-x}$Cu$_{x}$ O$_4$as the cathode of 4 V class lithium secondary batteries, XRD, TGA analysis were conducted. Although the cycle performance of the LiMn$_{2-x}$Cu$_{x}$ O$_4$was improved from pure LiMn$_2$O$_4$, the discharge capacity was significantly lower than LiCoO$_2$. In this paper, We study the Electrochemical characterization and enhanced stability of Cu-doped spinels in the LiMn$_{2-x}$Cu$_{x}$ O$_4$upon initial cycling.l cycling.

• 한국결정성장학회지
• /
• 제10권3호
• /
• pp.219-225
• /
• 2000

스피넬형의 $LiMn_2$O$_4$는 출발물질로 LiOH와 Mn($CH_3$COO)$_2$.$4H_2$O를 사용하여 졸-겔법으로 합성한 xerogel을 $150^{\circ}C$로 1차 열처리한 후 $350^{\circ}C$로 2차 열처리하여 합성하였다. 그러나 $350^{\circ}C$ 이상으로 열처리할 경우 $Mn_2O_3$가 생겼으며, 이로 인해서 Li/lM $LiClO_4$(in PC)$LiMn_2O_4$cell을 구성하여 0.25 mA/$\textrm{cm}^2$의 전류밀도로 충.방전 실험을 한 결과 $350^{\circ}C$에서 열처리한 것은 15 cycle후에 88 mAh/g에서 56 mAh/g으로 35.7%의 용량감소가 나타났으나 $500^{\circ}C$에서 열처리한 것은 89 mAh/g에 51 mAh/g으로 42.5%의 용량감소가 나타났으며 이는 $Mn^{3+}$ 의 증가로 인한 Jahn-Teller distortion의 결과로 볼 수 있다.

• E2M - 전기 전자와 첨단 소재
• /
• 제1권2호
• /
• pp.152-161
• /
• 1988

Pb(Zr, Ti)O$^{3}$-Pb(Mg, Nb)O$^{3}$계에 MnO$_{2}$첨가량을 변화시켜 소결성, 미세구조, 유전상수, 비저항 및 압전특성에 미치는 영향을 XRD, EDAX 및 SEM을 이용하여 미세구조를 관찰하고 실험을 통하여 전기적 성질에 미치는 영향을 밝혔다. 비저항의 변화없이 그레인 성장이 억제되는 $MnO_{2}$의 첨가량은 0.4wt%이었으며 이때 분말의 합성이 촉진되어 소성된 시편의 밀도가 증가하였다. 그러나 고상반응의 범위를 벗어나는 과잉 $MnO_{2}$는 편석이 되어 그레인 경계상에 모임이 확인되었고 또한 기공을 형성하여 밀도를 낮추었다. $Mn^{+4}$는 $Mg^{+2}$ 와 치환되어 페로브스카이트 구조의 "A" 결핍을 유발하였으며 이것이 비저강을 감소시키는 원인으로 밝혀졌다.감소시키는 원인으로 밝혀졌다.

• Journal of Magnetics
• /
• 제11권4호
• /
• pp.164-166
• /
• 2006

We have investigated the dielectric and magnetic properties of ferroelectric-antiferromagnetic $BaTiO_{3}-LaMnO_{3}$ composite with changing relative mole percents. Due to high sintering temperature, i.e. $1150^{\circ}C$, the Ba ion in $BaTiO_{3}$ seems to diffuse into $LaMnO_{3}$; resulting in $BaTiO_{3}-(La,Ba)MnO_{3}$ ferroelectric-ferromagnetic composite. At room temperature, $0.9BaTiO_{3}-0.1LaMnO_{3}$ composite exhibits considerable magnetization (${\sim}0.7\;emu/g\;at\;2000\;Oe$) and low coercive field (${\sim}5\;Oe$). Also it exhibits high dielectric constant (${\sim}560$) and low loss (${\sim}0.08$) at 10 kHz. This result may imply that $BaTiO_{3}-LaMnO_{3}$ could be suitable for a low leakage multiferroic composite.

• 한국결정성장학회지
• /
• 제16권4호
• /
• pp.172-179
• /
• 2006

[ $Al_2O_3-MoO_3$ ]의 혼합물을 환원소성하면 $MoO_3$만 $900^{\circ}C$에서 Mo로 환원되고 $1300^{\circ}C$까지 $Al_2O_3$와 Mo간의 화합물은 형성되지 않았다. $Al_2O_3-MoO_3-MnO_2$, 혼합물의 경우, $900^{\circ}C$에서 먼저 $MnO_2$가 $MoO_3$와 반응하여 중간화합물 $Mn_2Mo_3O_8$를 형성하였다가. $1100^{\circ}C$와 $1300^{\circ}C$에서 $Mn_2Mo_3O_8$ 화합물은 사라지고 새로운 화합물 $MnAl_2O_4$가 생성되었다. $Al_2O_3$와 $MoO_3,\;MnO_2$의 혼합분말 중 Mo만이 선택적으로 환원되는 selective reduction process에 의해 $Al_2O_3/Mo/MnO_2$ 복합재를 제조하였다. $Al_2O_3/Mo$ 복합재의 경우 Mo의 함량이 증가함에도 불구하고 Mo입자가 $Al_2O_3$ matrix의 입성장을 억제하여 평균입경의 변화는 거의 없었다. 파괴강도는 $Al_2O_3$ matrix의 입성장 억제 현상 때문에 Mo의 함량이 증가함에 따라 증가하였다. 경도는 Mo의 낮은 경도값 때문에 약간 감소하였으나 반면에 파괴인성은 증가하였다. $Al_2O_3/Mo/MnO_2$ 복합재의 경우 $MnO_2$는 matrix의 입성장을 촉진시켰고, Mo와 $MnO_2$의 함량이 증가함에 따라 $MnO_2$의 입성장효과 때문에 오히려 낮은 파괴강도를 보였다. 경도는 입계에 존재하는 coalesced Mo 입자들과 matrix의 입성장 때문에 더욱 감소하였으나 반면에 파괴인성은 더욱 증가하는 경 향을 보였다.

• 한국분말재료학회지
• /
• 제25권4호
• /
• pp.296-301
• /
• 2018

In this study, an experiment is performed to recover the Li in $Li_2CO_3$ phase from the cathode active material NMC ($LiNiCoMnO_2$) in waste lithium ion batteries. Firstly, carbonation is performed to convert the LiNiO, LiCoO, and $Li_2MnO_3$ phases within the powder to $Li_2CO_3$ and NiO, CoO, and MnO. The carbonation for phase separation proceeds at a temperature range of $600^{\circ}C{\sim}800^{\circ}C$ in a $CO_2$ gas (300 cc/min) atmosphere. At $600{\sim}700^{\circ}C$, $Li_2CO_3$ and NiO, CoO, and MnO are not completely separated, while Li and other metallic compounds remain. At $800^{\circ}C$, we can confirm that LiNiO, LiCoO, and $Li_2MnO_3$ phases are separated into $Li_2CO_3$ and NiO, CoO, and MnO phases. After completing the phase separation, by using the solubility difference of $Li_2CO_3$ and NiO, CoO, and MnO, we set the ratio of solution (distilled water) to powder after carbonation as 30:1. Subsequently, water leaching is carried out. Then, the $Li_2CO_3$ within the solution melts and concentrates, while NiO, MnO, and CoO phases remain after filtering. Thus, $Li_2CO_3$ can be recovered.

• 자원환경지질
• /
• 제42권5호
• /
• pp.479-486
• /
• 2009

자연환경에서 망간은 +2, +3, +4가의 다양한 산화수로 존재하며 환경적으로 중요한 여러 원소들과 활발한 산화/환원반응을 함으로써 원소의 지화학적 순환에 중요한 역할을 하고 있다. 특히 망간은 다양한 산화물로 존재하며 각각 특징적인 망간의 산화상태를 나타내고 있다. 망간산화물의 지화학적 특성, 즉 망간산화물의 용해도, 흡착력, 산화/환원 능력은 산화물을 구성하는 망간의 산화수에 의해 크게 좌우되는 것으로 알려져 있다. 따라서 망간의 산화수를 결정하는 인자를 밝히는 것이 산화/환원에 민감한 여러 오염원소의 지화학적 거동을 예측하는 데 매우 중요하다. X-선 광전자 분광법(X-ray photoelectron spectroscopy, XPS)은 고체상으로 존재하는 다양한 원소의 산화상태를 밝히는데 매우 유용한 도구이다. 본 연구에서 MnO, $Mn_2O_3$, $MnO_2$에 대한 망간의 산화수를 결정하기 위해 XPS $Mn2p_{3/2}$와 Mn3s 결합에너지 스펙트럼을 측정하여 기존에 보고 된 값들과 비교하였다. 망간산화물에 대한 $Mn2p_{3/2}$ 결합에너지는 MnO, 640.9 eV; $Mn_2O_3$, 641.5 eV; $MnO_2$, 641.8 eV로서, 망간의 산화수가 증가할수록 $Mn2p_{3/2}$ 의 결합에너지가 증가하는 것으로 나타났다. 시료준비 방법 중 하나인 Ar 에칭의 경우 시료 표면의 전자구조를 변화시킬 수 있는 가능성이 확인되었다.

• 공업화학
• /
• 제33권3호
• /
• pp.328-334
• /
• 2022

For the study of environmental application of natural zeolites (NZ) and red mud (RM), which are discharged from various industrial fields, the catalytic ozonation of 2-butaone (methyl ethyl ketone, MEK) was performed using the Mn-loaded NZ prepared according to the Mn content of 1, 3, 5, 7, and 10 wt%. By the addition of Mn to NZ, the BET (Brunaure-Emmett-Teller) specific surface area of Mn/NZ catalysts decreased while the ratio of Mn³⁺/[Mn³⁺+Mn⁴⁺] intensively increased. Besides, the addition of Mn component to NZ increased the ratio of adsorbed oxygen (O_adsorbed) toward lattice oxygen (O_lattice), O_adsorbed/O_lattice from 0.076 of NZ to 0.465 of 10 wt% Mn/NZ according to the amount of Mn. It is known that the proportion of two species, Mn³⁺ and O_adsorbed, would greatly affect the catalytic activity. However, the balancing between the paired species, Mn³⁺ vs. Mn⁴⁺ and O_adsorbed vs. O_lattice might be more essential for the catalytic ozonation of MEK at room temperature. Among the Mn-loaded NZ catalysts, the 3 wt% Mn/NZ showed the best activity for the removal of MEK and ozone. The 5, 7, and 10 wt% Mn/NZ catalysts are slightly inferior to the 3 wt% Mn/NZ. Compared to the pristine NZ, the Mn/NZ catalysts showed better activity for the catalytic ozonation of MEK. In addition, the 3 wt% Mn/NZ was confirmed to have the most available acid sites among them by the analysis of NH₃-TPD (temperature programmed desorption). This might be the major reason for the best catalytic activity of 3 wt% Mn/NZ together with the adjusted distribution ratios of Mn³⁺/Mn⁴⁺ and O_adsorbed/O_lattice. Considering the result of 3 wt% Mn/NZ, the 3 wt% Mn/RM was prepared to perform the catalytic activity for the removal of MEK and ozone, but the efficiency of 3 wt% Mn/RM was significantly lower than that of the 3 wt% Mn/NZ.

• 한국전기전자재료학회논문지
• /
• 제14권7호
• /
• pp.562-566
• /
• 2001

The effects of MnO$_2$ addition on the properties in Pb(Mg$_{1}$3/Nb$_{2}$3/)O$_3$ relaxor ferroelectrics were studied in the phase transition temperature range from -4$0^{\circ}C$ to 11$0^{\circ}C$. Specimens were made via solid state processing method. Dielectric properties, piezoelctric properties, electric-field-induced strain were examined to clarify the effect of MnO$_2$ addition in 0.9MN-0.1PT. As the amount of MnO$_2$ increases, the maximum dielectric constant and the dielectric loss decreases. Q$_{m}$ increased by increasing the doping contents of Mn. When 0.5wt% MnO$_2$ was doped, Q$_{m}$ increased from 95 to 480. The electric-filed-induced strain and polarization decreases as the amount of MnO$_2$ increases. From the experimental results, it was suggested that Mn behaves as an ferroelectric domain pinning element.ent.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.308-314
• /
• 2016

Cobalt-, zinc-, and nickel-zinc-substituted nano-size manganese ferrite powders, $MnFe_2O_4$, $Mn_{0.8}Co_{0.2}Fe_2O_4$, $Mn_{0.8}Zn_{0.2}Fe_2O_4$ and $Mn_{0.8}Ni_{0.1}Zn_{0.1}Fe_2O_4$, were fabricated using a sol-gel method, and their crystallographic and magnetic properties were subsequently studied. The $MnFe_2O_4$ ferrite powder annealed at temperatures above 523 K exhibited a spinel structure, and the particle size increased as the annealing temperature increased. All ferrites annealed at 773 K showed a single spinel structure, and the lattice constants and particle size decreased with the substitution of Co, Zn, and Ni-Zn. The $M{\ddot{o}}ssbauer$ spectrum of the $MnFe_2O_4$ ferrite powder annealed at 523 K only showed a doublet due to its superparamagnetic phase, and the $M{\ddot{o}}ssbauer$ spectra of the $MnFe_2O_4$, $Mn_{0.8}Co_{0.2}Fe_2O_4$, and $Mn_{0.8}Zn_{0.2}Fe_2O_4$ ferrite powders annealed at 773 K could be fitted as the superposition of two Zeeman sextets due to the tetrahedral and octahedral sites of the $Fe^{3+}$ ions. However, the $M{\ddot{o}}ssbauer$ spectrum of the $Mn_{0.8}Ni_{0.1}Zn_{0.1}Fe_2O_4$ ferrite powder annealed at 773 K consisted of two Zeeman sextets and one quadrupole doublet due to its ferrimagnetic and paramagnetic behavior. The area ratio of the $M{\ddot{o}}ssbauer$ spectra could be used to determine the cation distribution equation, and we also explained the variation in the $M{\ddot{o}}ssbauer$ parameters by using this cation distribution equation, the superexchange interaction and the particle size. Relative to pure $MnFe_2O_4$, the saturation magnetizations and coercivities were larger in $Mn_{0.8}Co_{0.2}Fe_2O_4$ and smaller in $Mn_{0.8}Zn_{0.2}Fe_2O_4$, and $Mn_{0.8}Ni_{0.1}Zn_{0.1}Fe_2O_4$. These variations could be explained using the site distribution equations, particle sizes and magnetic moments of the substituted ions.