• 제목/요약/키워드: $Mg_xZn_{1-x}O$

검색결과 84건 처리시간 0.026초

MgxZn1-xO를 활용한 Multi-layer 구조 LED 특성에 관한 연구 (The Characteristics of Multi-layer Structure LED with MgxZn1-xO Thin Films)

  • 손지훈;김상현;장낙원;김홍승
    • 한국전기전자재료학회논문지
    • /
    • 제25권10호
    • /
    • pp.811-816
    • /
    • 2012
  • The effect of co-sputtering condition on the structural properties of $Mg_xZn_{1-x}O$ thin films grown by RF magnetron co-sputtering system was investigated for manufacturing ZnO/MgZnO structure LED. $Mg_xZn_{1-x}O$ thin films were grown with ZnO and MgO target varying RF power. Structural properties were investigated by X-ray diffraction (XRD) and Energy dispersive spectroscopy (EDS). The ZnO thin films have sufficient crystallinity on the high RF power. As RF power of ZnO target increased, the contents of MgO in the $Mg_xZn_{1-x}O$ film decreased. LED was manufactured using ZnO/MgZnO multi-layer on p-GaN/$Al_2O_3$ substrate. Threshold voltage of multi-layer LED was appeared at 8 V, and it was luminesced at wave length of 550 nm.

고주파 마그네트론 스퍼터링 방법으로 증착한 PDP용 ${Mg_{1-x}}{Zn_x}$O 보호막의 전기광학적 특성연구 (Electro-optical Properties of ${Mg_{1-x}}{Zn_x}$O Thin Films Grown by a RF Magnetron Sputtering Method as a Protective Layer for AC PDPs)

  • 정은영;이상걸;이도경;이교중;손상호
    • 한국재료학회지
    • /
    • 제11권3호
    • /
    • pp.197-202
    • /
    • 2001
  • 교류구동형 플라즈마 표시소자의 보호막으로 사용되는 MgO의 특성향상을 위하여 기존의 MgO에 양이온이 등전적으로 치환될 수 있는 ZnO를 소량 첨가하여 고주파 마그네트론 스퍼터링 방법으로 $Mg_{1-x}$Z $n_{x}$O박막을 성장시키고 박막의 전기적, 광학적 특성을 조사하였다. ZnO농도가 0.5 at%, 1at%인 $Mg_{1-x}$Z $n_{x}$O 박막을 보호막으로 갖는 PDP 테스트 판넬을 제작하고 ZnO의 첨가가 소자의 방전전압과 메모리 이득에 미치는 영향을 살펴보았다. ZnO농도가 0at%, 0.5 at%, 1at%인 $Mg_{1-x}$Z $n_{x}$O 박막의 광투과율은 ZnO 첨가에 따라 변화를 보이지 않으나 유전상수는 다소 증가하는 경향을 보였다. ZnO의 농도가 0.5 at%인 $Mg_{1-x}$Z $n_{x}$O 박막을 보호막으로 갖는 PDP 소자의 방전개시전압과 방전유지 전압이 MgO 박막을 보호막으로 갖는 소자에 비해 20V까지 낮아졌고, 결과적으로 메모리계수는 다소 증가하였다. ZnO농도가 0.5 at%, 1at%인 $Mg_{1-x}$Z $n_{x}$O 박막을 보호막으로 갖는 소자에서 ZHO의 첨가에 비례하여 방전세기 (플라즈마 밀도)가 증가하였다.도)가 증가하였다.도)가 증가하였다.

  • PDF

증착 온도와 후열처리에 따른 $Mg_xZn_{1-x}O$ 박막의 특성 연구 (Variation of the properties of $Mg_xZn_{1-x}O$ films depending on deposition temperature and post annealing treatment)

  • 김재원;강홍성;김종훈;이상렬
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
    • /
    • pp.579-582
    • /
    • 2004
  • [ $Mg_xZn_{1-x}O$ ] thin films on (001) sapphire substrates have been deposited by pulsed laser deposition (PLD). The substrate temperature has been varied from $200^{\circ}C$ to $600^{\circ}C$ in order to control Mg content in $Mg_xZn_{1-x}O$ thin film. $Mg_xZn_{1-x}O$ thin films deposited at 200, 400 and $600^{\circ}C$ were annealed at temperatures of $800^{\circ}C$. The ratio of Mg was mesured by Rutherford backscattering spectrometry. The optical properties of $Mg_xZn_{1-x}O$ thin films were characterized by photomulinesence. The ratio of Mg was varied depending on the deposition temperatures which resulted in the change of energy bandgap.

  • PDF

Co-sputtering법으로 제작된 MgxZn1-xO 박막의 인가 파워에 따른 구조적 특성 (The Structural Characteristics of MgxZn1-xO Thin Films with Sputtering Power by Co-sputtering Method)

  • 김상현;손지훈;장낙원;김홍승;윤영
    • 한국전기전자재료학회논문지
    • /
    • 제26권2호
    • /
    • pp.164-169
    • /
    • 2013
  • The effect of co-sputtering condition on the structural properties of $Mg_xZn_{1-x}O$ thin films grown by RF magnetron co-sputtering system was investigated for manufacturing UV LED. $Mg_xZn_{1-x}O$ thin films were grown with ZnO and MgO target varying RF power. Structural properties were investigated by X-ray diffraction (XRD) and Energy dispersive spectroscopy (EDS). The $Mg_xZn_{1-x}O$ thin films have sufficient crystallinity on the high ZnO power. The EDS analyzed showed that the Mg content in the $Mg_xZn_{1-x}O$ films decreased from 3.99 to 24.27 at.% as the RF power of ZnO target increased. The Mg content in the $Mg_xZn_{1-x}O$ films could be controlled by co-sputtering power.

전파흡수체용 $[Ni_x-Mg_{0.1}-Zn_{(1-x-0.1)}{\cdot}Fe_2O_4]$-Rubber Composite에 관한 연구 (A Study on $[Ni_x-Mg_{0.1}-Zn_{(1-x-0.1)}{\cdot}Fe_2O_4]$-Rubber Composite for Electromagnetic Wave Absorber)

  • 박연준;김동일
    • 한국항해학회지
    • /
    • 제22권4호
    • /
    • pp.69-75
    • /
    • 1998
  • The super wideband electromagnetic wave absorber in RF-A-PF type has been proposed, which can be used for an anechoic chamber, wall material to prevent TV ghost, etc, In this paper, $Ni_x-Mg_{0.1}-Zn_(1-x-0.1){\cdot}Fe_2O_4$ Ferrite Powder has been fabricated. Using this, then, [$Ni_x-Mg_{0.1}-Zn_(1-x-0.1){\cdot}Fe_2O_4$-Rubber composite for RF-layer in the RF-A-PF type absorber has been fabricated and its characteristics has been analyzed. As a result, it has been shown that the $Ni_x-Mg_{0.1}-Zn_(1-x-0.1){\cdot}Fe_2O_4$-Rubber composit with the quantity $_x$ of $Ni_x$ between 0.5 and 0.6 is suitable for the RF-layer in the case of which the grain size is sub-micrometer order.

  • PDF

Composition Dependence on Structural and Optical Properties of MgxZn1-xO Thin Films Prepared by Sol-Gel Method

  • Kim, Min-Su;Noh, Keun-Tae;Yim, Kwang-Gug;Kim, So-A-Ram;Nam, Gi-Woong;Lee, Dong-Yul;Kim, Jin-Soo;Kim, Jong-Su;Leem, Jae-Young
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권9호
    • /
    • pp.3453-3458
    • /
    • 2011
  • The $Mg_xZn_{1-x}O$ thin films with the various content ratio ranging from 0 to 0.4 were prepared by sol-gel spincoating method. To investigate the effects of content ratio on the structural and optical properties of the $Mg_xZn_{1-x}O$ thin films, scanning electron microscopy (SEM), X-ray diffraction (XRD), and photoluminescence (PL) were carried out. With increase in the content ratio, the grain size of the $Mg_xZn_{1-x}O$ thin films was increased, however, at the content ratio above 0.2, MgO particles with cubic structure were formed on the surface of the $Mg_xZn_{1-x}O$ thin films, indicating that the Mg content exceeded its solubility limit in the thin films. The residual stress of the $Mg_xZn_{1-x}O$ thin films is increased with increase in the Mg mole fraction. In the PL investigations, the bandgap and the activation energy of the $Mg_xZn_{1-x}O$ thin films was increased with the Mg mole fraction.

$(Zn_{1-x}Mg_x)_2SiO_4$:Mn 형광체의 제조와 발광특성 (Preparation and Luminescent properties of $(Zn_{1-x}Mg_x)_2SiO_4$:Mn phosphors)

  • 이지영;유일
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.392-393
    • /
    • 2007
  • PDP용 녹색 $Zn_2SiO_4$:Mn 형광체의 발광특성과 결정성을 향상시키기 위해 co-dopant로 Mg를 첨가한 $(Zn_{1-x}Mg_x)_2SiO_4$:Mn 형광체를 합성하였다. 합성된 형광체의 발광특성을 PL로 조사한 결과, $Zn_2SiO_4$:Mn 형광체는 Mg의 농도에 관계없이 530nm에서 녹색 발광을 하였고, Mg의 농도가 0.5 mol%일 때 가장 높은 발광세기가 나타났다. 이것은 Zn과 이온반경이 비슷한 Mg가 치환되어 모체에서의 Mn으로의 에너지 전이가 증가하여 발광세기가 증가한 것으로 생각된다.

  • PDF

펄스 레이저 증착법을 이용한 $Zn_{1-x}Mg_xO$ 박막의 제작과 특성연구 (Preparation and Properties of $Zn_{1-x}Mg_xO$ Thin Films Prepared by Pulsed Laser Deposition Method)

  • 서광종
    • 마이크로전자및패키징학회지
    • /
    • 제12권1호
    • /
    • pp.73-76
    • /
    • 2005
  • To widen the band gap of ZnO, we have investigated $Zn_{1-x}Mg_xO(ZMO)$ thin films prepared by pulsed laser deposition on c-plane sapphire substrates at $500^{\circ}C$. From X-ray diffraction patterns, ZMO films show only the (0002) and (0004) diffraction peaks. It means that the flints have the wurtzite structure. Segregation of ZnO and MgO phases is found in the films with x=0.59. All the samples are highly transparent in the visible region and have a sharp absorption edge in the UV region. The shift of absorption edge to higher energy is observed in the films with higher Mg composition. The excitonic nature of the films is clearly appeared in the spectra for all alloy compositions. The optical band-gap ($E_g$) of ZMO films is obtained from the ${\alpha}^2$ vs Photon energy plot assuming ${\alpha}^2\;\propto$ (hv - $E_g$), where u is the absorption coefficient and hv is the photon energy. The value of $E_g$ increases up to 3.72 eV for the films with x=0.35. It is important to adjust Mg composition control for controlling the band-gap of ZMO films.

  • PDF

$(1-y)Pb(Mg_{(1-x)/3}Zn_{x/3}Zn_{x/3}Nb_{2/3})O_3-yBaTiO_3$ 세라믹스의 구조 및 유전 성질 (Structural and Dielectric Properties of $(1-y)Pb(Mg_{(1-x)/3}Zn_{x/3}Zn_{x/3}Nb_{2/3})O_3-yBaTiO_3$Ceramics)

  • 홍영식;박휴범;김시중
    • 한국세라믹학회지
    • /
    • 제32권8호
    • /
    • pp.938-944
    • /
    • 1995
  • Dielectric properties and the stabilization of perovskite phase for the (1-y)Pb(Mg(1-x)/3Znx/3Znx/3Nb2/3)O3-yBaTiO3 ((1-y)PM1-xZxN-yBT) ceramics have been investigated as a function of amount of x and y. In the (1-y)PM0.6Z0.4N-yBT ceramics, the amount of pyrochlore phae was decreased by the addition of 2 mol% BT and the dielectric constant was increased. However, the dielectric constant decreased with further addition of BT even though pyrochlore phase was decreased. Dielectric prooperties in (1-y)PM0.6Z0.4N-yBT ceracmis were affected by the character of the BT rather than the amount of pyrochlore phase. The phase transitions were broadened and phase transition temperatures were lowered by the increase of BT contents.

  • PDF