• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.10
• /
• pp.811-816
• /
• 2012

The effect of co-sputtering condition on the structural properties of $Mg_xZn_{1-x}O$ thin films grown by RF magnetron co-sputtering system was investigated for manufacturing ZnO/MgZnO structure LED. $Mg_xZn_{1-x}O$ thin films were grown with ZnO and MgO target varying RF power. Structural properties were investigated by X-ray diffraction (XRD) and Energy dispersive spectroscopy (EDS). The ZnO thin films have sufficient crystallinity on the high RF power. As RF power of ZnO target increased, the contents of MgO in the $Mg_xZn_{1-x}O$ film decreased. LED was manufactured using ZnO/MgZnO multi-layer on p-GaN/$Al_2O_3$ substrate. Threshold voltage of multi-layer LED was appeared at 8 V, and it was luminesced at wave length of 550 nm.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.197-202
• /
• 2001

M $g_{1-x}$ Z $n_{x}$O thin films with various composition x of ZnO were fabricated by a RF magnetron sputtering method, which is expected to improve the electro-optical properties of the conventional MgO protective layer for AC-PDP. Test panels with the $Mg_{1-x}$Z $n_{x}$O protective layer have been fabricated in order to investigate the effects of ZnO doping on the electrical characteristics of devices such as the discharge voltages and the memory gain. Experimental results revealed that test panels with the $Mg_{1-x}$Z $n_{x}$O(x=0.5at%) protective layer show lower firing and sustain voltages than those seen in panels with MgO protective layer by 20V. resulting in an increasement of the memory coefficient. In addition, it was found that test panels with the $Mg_{1-x}$Z $n_{x}$O protective layer show higher discharge intensity, i. e., higher plasma density, compared with panels with MgO protective layer.ve layer.layer.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.08a
• /
• pp.254-255
• /
• 2001

No Abstract.See Full-text

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.579-582
• /
• 2004

[ $Mg_xZn_{1-x}O$ ] thin films on (001) sapphire substrates have been deposited by pulsed laser deposition (PLD). The substrate temperature has been varied from $200^{\circ}C$ to $600^{\circ}C$ in order to control Mg content in $Mg_xZn_{1-x}O$ thin film. $Mg_xZn_{1-x}O$ thin films deposited at 200, 400 and $600^{\circ}C$ were annealed at temperatures of $800^{\circ}C$. The ratio of Mg was mesured by Rutherford backscattering spectrometry. The optical properties of $Mg_xZn_{1-x}O$ thin films were characterized by photomulinesence. The ratio of Mg was varied depending on the deposition temperatures which resulted in the change of energy bandgap.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.2
• /
• pp.164-169
• /
• 2013

The effect of co-sputtering condition on the structural properties of $Mg_xZn_{1-x}O$ thin films grown by RF magnetron co-sputtering system was investigated for manufacturing UV LED. $Mg_xZn_{1-x}O$ thin films were grown with ZnO and MgO target varying RF power. Structural properties were investigated by X-ray diffraction (XRD) and Energy dispersive spectroscopy (EDS). The $Mg_xZn_{1-x}O$ thin films have sufficient crystallinity on the high ZnO power. The EDS analyzed showed that the Mg content in the $Mg_xZn_{1-x}O$ films decreased from 3.99 to 24.27 at.% as the RF power of ZnO target increased. The Mg content in the $Mg_xZn_{1-x}O$ films could be controlled by co-sputtering power.

• Journal of the Korean Institute of Navigation
• /
• v.22 no.4
• /
• pp.69-75
• /
• 1998

The super wideband electromagnetic wave absorber in RF-A-PF type has been proposed, which can be used for an anechoic chamber, wall material to prevent TV ghost, etc, In this paper, $Ni_x-Mg_{0.1}-Zn_(1-x-0.1){\cdot}Fe_2O_4$ Ferrite Powder has been fabricated. Using this, then, [$Ni_x-Mg_{0.1}-Zn_(1-x-0.1){\cdot}Fe_2O_4$-Rubber composite for RF-layer in the RF-A-PF type absorber has been fabricated and its characteristics has been analyzed. As a result, it has been shown that the $Ni_x-Mg_{0.1}-Zn_(1-x-0.1){\cdot}Fe_2O_4$-Rubber composit with the quantity $_x$ of $Ni_x$ between 0.5 and 0.6 is suitable for the RF-layer in the case of which the grain size is sub-micrometer order.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3453-3458
• /
• 2011

The $Mg_xZn_{1-x}O$ thin films with the various content ratio ranging from 0 to 0.4 were prepared by sol-gel spincoating method. To investigate the effects of content ratio on the structural and optical properties of the $Mg_xZn_{1-x}O$ thin films, scanning electron microscopy (SEM), X-ray diffraction (XRD), and photoluminescence (PL) were carried out. With increase in the content ratio, the grain size of the $Mg_xZn_{1-x}O$ thin films was increased, however, at the content ratio above 0.2, MgO particles with cubic structure were formed on the surface of the $Mg_xZn_{1-x}O$ thin films, indicating that the Mg content exceeded its solubility limit in the thin films. The residual stress of the $Mg_xZn_{1-x}O$ thin films is increased with increase in the Mg mole fraction. In the PL investigations, the bandgap and the activation energy of the $Mg_xZn_{1-x}O$ thin films was increased with the Mg mole fraction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.392-393
• /
• 2007

PDP용 녹색 $Zn_2SiO_4$:Mn 형광체의 발광특성과 결정성을 향상시키기 위해 co-dopant로 Mg를 첨가한 $(Zn_{1-x}Mg_x)_2SiO_4$:Mn 형광체를 합성하였다. 합성된 형광체의 발광특성을 PL로 조사한 결과, $Zn_2SiO_4$:Mn 형광체는 Mg의 농도에 관계없이 530nm에서 녹색 발광을 하였고, Mg의 농도가 0.5 mol%일 때 가장 높은 발광세기가 나타났다. 이것은 Zn과 이온반경이 비슷한 Mg가 치환되어 모체에서의 Mn으로의 에너지 전이가 증가하여 발광세기가 증가한 것으로 생각된다.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.73-76
• /
• 2005

To widen the band gap of ZnO, we have investigated $Zn_{1-x}Mg_xO(ZMO)$ thin films prepared by pulsed laser deposition on c-plane sapphire substrates at $500^{\circ}C$. From X-ray diffraction patterns, ZMO films show only the (0002) and (0004) diffraction peaks. It means that the flints have the wurtzite structure. Segregation of ZnO and MgO phases is found in the films with x=0.59. All the samples are highly transparent in the visible region and have a sharp absorption edge in the UV region. The shift of absorption edge to higher energy is observed in the films with higher Mg composition. The excitonic nature of the films is clearly appeared in the spectra for all alloy compositions. The optical band-gap ($E_g$) of ZMO films is obtained from the ${\alpha}^2$ vs Photon energy plot assuming ${\alpha}^2\;\propto$ (hv - $E_g$), where u is the absorption coefficient and hv is the photon energy. The value of $E_g$ increases up to 3.72 eV for the films with x=0.35. It is important to adjust Mg composition control for controlling the band-gap of ZMO films.

• Journal of the Korean Ceramic Society
• /
• v.32 no.8
• /
• pp.938-944
• /
• 1995

Dielectric properties and the stabilization of perovskite phase for the (1-y)Pb(Mg(1-x)/3Znx/3Znx/3Nb2/3)O3-yBaTiO3 ((1-y)PM1-xZxN-yBT) ceramics have been investigated as a function of amount of x and y. In the (1-y)PM0.6Z0.4N-yBT ceramics, the amount of pyrochlore phae was decreased by the addition of 2 mol% BT and the dielectric constant was increased. However, the dielectric constant decreased with further addition of BT even though pyrochlore phase was decreased. Dielectric prooperties in (1-y)PM0.6Z0.4N-yBT ceracmis were affected by the character of the BT rather than the amount of pyrochlore phase. The phase transitions were broadened and phase transition temperatures were lowered by the increase of BT contents.