• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.439-442
• /
• 2004

The effects of sintering additives on the low-temperature sintering and microwave dielectric properties of $Mg_4Nb_2O_9$ dielectric ceramics were studied. When $3{\sim}20wt%$ of $0.242Bi_2O_3-0.758V_2O_5$ was added, the sintering temperature decreased from $1100{\sim}1300^{\circ}C$ to $950^{\circ}C$ and high density was obtained. When $Mg_4Nb_2O_9$ was sintered at $950^{\circ}C$ with 10wt% of sintering additive, the microwave dielectric properties of $Q{\times}f_0\;=\;80.035GHz,\;\epsilon_r\;=\;13.3\;and\;\tau_f\;=\;-12.9\;ppm/^{\circ}C$ were obtained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.300-301
• /
• 2007

$Mg_4(Nb_{2-x}V_x)O_9$ (MNV) ceramics have been prepared by a hydrothermal method. Low-temperature sintering of $Mg_4(Nb_{2-x}V_x)O_9$ (MNV) by V substitution for Nb was discussed in this study. A $Q{\cdot}f_0$ value of 103,297 GHz with a ${\varepsilon}_r$ of 12.56 and a ${\tau}_f$ of $-10.53\;ppm/^{\circ}C$ was obtained when x=0.0625 after sintering at $1100^{\circ}C$ for 5 h.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.281-282
• /
• 2007

$Mg_4Nb_2O_9$ (MN) ceramics have been prepared by a sol-gel method. The powder characteristics, phase evolution, and microwave dielectric properties of the MN were investigated in various processing conditions such as sol-gel compositions, calcination, and sintering temperatures. A Qxfo value of 111,717 GHz with a ${\varepsilon}_r$ of 10.59 and a ${\tau}_f$ of $+1.736\;ppm/^{\circ}C$ was obtained after sintering at $1300^{\circ}C$ for 5 h.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1420-1421
• /
• 2006

In this study, structural and micowave dielectric properties of the $Mg_{5}B_{4}O_{15}$ (B=Ta, Nb) cation-deficient perovskite ceeramics. The specimens are prepared through the solid-state route. According to the XRD pattern, $Mg_{4}Ta_{2}O_9$ and $MgTa_{2}O_6$ phase exist in calcined and sintered $Mg_{5}Ta_{4}O_{15}$ powder. Also $Mg_{5}Ta_{4}O_{15}$ phase added with increasing sintering temperature. In the case of calcined and sintered $Mg_{5}Nb_{4}O_{15}$ powder, single phase of $Mg_{5}Nb_{4}O_{15}$ were appeared. The bulk density and quality factor of the $Mg_{5}B_{4}O_{15}$ (B=Ta, Nb) ceramics were increased with sinteming temperature in $1400^{\circ}C{\sim}1450^{\circ}C$, but these were decreased in another sintering temperature. Dielectric constant of the $Mg_{5}Ta_{4}O_{15}$ ceramics was increased continuously with increasing of sintering temperature. And the dielectric constant of the $Mg_{5}Nb_{4}O_{15}$ ceramics was increased in $1400^{\circ}C{\sim}1450^{\circ}C$ but decreased in $1475^{\circ}C$. In the case of the $Mg_{5}Ta_{4}O_{15}$ and $Mg_{5}Nb_{4}O_{15}$ ceramics sintered at $1450^{\circ}C$ for 5h, the dielectric constant, quality factor, and temperature coefficient of the resonant frequency (TCRF) were 8.2, 259,473 GHz, -10.91 $ppm/^{\circ}C$ and 14, 37,350 GHz, -52.3 $ppm/^{\circ}C$, respectively.

• 한국세라믹학회지
• /
• 제34권3호
• /
• pp.281-288
• /
• 1997

유전율이 높고 온도안정성이 우수하다고 알려져 있는 40Pb(Mg1/3Nb2/3)O3-30PbTiO3-30Pb(Mg1/2W1/2)O3계 세라믹스에 소결온도를 낮추기 위하여 저온에서 액상을 형성하는 91PbO-9WO3를 과잉첨가하여 소결성, 미세구조 및 유전성의 변화에 대하여 조사하였다. 91PbO-9WO3의 첨가량이 증가함에 따라 소결온도가 저하하였으며 6 mol%첨가시는 875$^{\circ}C$에서 소결이 가능하였다. 유전율은 기본조성에서 16,400이었고, 첨가제가 1 mol% 과잉첨가된 경우 18,500으로 최대값을 나타냈으며 이후 첨가량이 증가함에 따라 감소하였다. 첨가제의 첨가량이 2~4mol%인 시편의 온도에 따른 유전율 변화곡선에서 double peak maxima가 나타났으나, 첨가량이 5 mol% 이상인 시편에서는 입계에 텅스텐을 많이 포함하고 있는 결정상이 생성되었고 double peak maxima는 나타나지 않았다.

• 한국재료학회지
• /
• 제11권6호
• /
• pp.498-501
• /
• 2001

0.9Pb($Mg_{1/3}Nb_{2/3}$)$O_3$-0.1Pb$TiO_3$계 완화형 강유전체에서 MnO$_2$ 첨가가 압전물성에 미치는 영향을 강유전성이 우세한 온도영역인 -40~3$0^{\circ}C$의 온도범위에 걸쳐 조사하였다. MnO$_2$ 첨가에 의한 효과를 유전특성, 압전특성, 전계유기 변형특성 등의 영역에서 고찰하였다 MnO$_2$ 첨가량이 증가할수록 유전성 및 압전성은 hard piezoelectric의 경향을 나타내었다. 이러한 실험적 고찰로부터 첨가된 Mn은 강유전 도메인 분역을 고정하는 역할을 하는 것으로 제안되었다.

• 한국결정성장학회지
• /
• 제9권5호
• /
• pp.447-453
• /
• 1999

Czochralski법으로 congruent한 조성(48.6 mol% $LiNbO_2$)과 $LiNbO_3$: Mg(4.5, 6.0, 10.0, 20.0mol%), $LiNbO_3$ : Mn(0.1 mol%), $LiNbO_3$: Fe(0.05 mol%), $LiNbO_3$ : (Mg(4.5)+Mn(0.1), Fe(0.05 mol%)), LiNbO3 : (Mg(20.0)+Mn(0.1), Fe(0.05 mol%))인 융액으로부터 결정을 c-축 방향으로 성장시켰다. 이 결정들은 상온에서의 XRD pattern과 상온~$1230^{\circ}C$의 온도영역과 100Hz~10MHz의 주파수영역에서의 유전상수, 상온에서의 UV_VIS, IR 스펙트럼, 결정내의 Mn2+, Fe3+ 이온에 대한 ESR 스펙트럼 등을 측정하였는데 XRD pattern과 상전이 온도, UV 흡수단, OH- 이온에 의한 스펙트럼, ESR 스펙트럼 등의 Mg첨가량 의존성으로부터 Mg가 첨가된 $LiNbO_3$ 결정의 결함구조에 대해서 논의하였다. congruent한 $LiNbO_3$결정과 Mg를 첨가한 $LiNbO_3$ 결정에서의 Mn2+ 이온은 Mg의 첨가량에 관계없이 Li+을 치환한다. 그러나 congruent한 $LiNbO_3$ 결정과 Mg를 첨가한 $LiNbO_3$ 결정에서의 Fe3+ 이온은 Mg가 4.5 mol% 첨가된 결정에서는 Li+ 자리를 Mg가 6.0 mol% 이상 첨가된 결정에서는 {{{{ { Nb}`_{Li } ^{5+ } }}}} 자리를 치환한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.476-479
• /
• 2001

The microwave dielectric properties of $[(Pb_{1-x}Ba_{x})_{1/2}La_{1/2}](Mg_{1/2}Nb_{1/2})O_{3}$ ceramics were investigated. When $[(Pb_{0.9}Ba_{0.1})_{1/2}La_{1/2}](Mg_{1/2}Nb_{1/2})O_{3}$ ceramics were sintered at $1250^{\circ}C$ and $1350^{\circ}C$ for 2hr, the microwave dielectric properties were obtained $\varepsilon_{r}=64\sim80$, $Q{\times}f=11,800\sim18,000$. As a result, $[(Pb_{0.9}Ba_{0.1})_{1/2}La_{1/2}](Mg_{1/2}Nb_{1/2})O_{3}$ having $\varepsilon_{r}=80$, $Q{\times}f=11,800$ (at 4 GHz) was developed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.476-479
• /
• 2001

The microwave dielectric properties of [(Pb$_{1-x}$ Ba$_{x}$)$_{1}$2/La$_{1}$2/](Mg$_{1}$2/Nb$_{1}$2/)O$_3$ ceramics were investigated. When [(Pb$_{0.9}$Ba$_{0.1}$)$_{1}$2/La$_{1}$2/](Mg$_{1}$2/Nb$_{1}$2/)O$_3$ ceramics were sintered at 125$0^{\circ}C$ and 135$0^{\circ}C$ for 2hr, the microwave dielectric properties were obtained $\varepsilon$$_{r}$=64~80, Qxf=11,800~18,000. As a result, [(Pb$_{0.9}$Ba$_{0.1}$)$_{1}$2/La$_{1}$2/](Mg$_{1}$2/Nb$_{1}$2/)O$_3$ having $\varepsilon$$_{r}$=80, Qxf=11,800 (at 4 GHz) was developed.ed.eveloped.ed.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권7호
• /
• pp.652-659
• /
• 1996

Sintering characteristics and electrical properties of xPb(Mg$_{1}$8/Te$_{1}$8/Mn$_{1}$4/Nb$_{1}$2/) $O_{3}$-(1-x) Pb (Zr$_{1}$2/ $Ti_{1}$2/) $O_{3}$ (x=0.075, 0.1, 0.125) ceramics are investigated. A sintering temperature of ceramics could be reduced to 950.deg. C by a reaction between PbO and B site compound material. The physical properties of 0.1Pb(Mg, Te, Mn, Nb) $O_{3}$ - 0.9Pb(Zr, Ti) $O_{3}$ bulk ceramic with 3wt% glass frit(0.857PbO-0.143W $O_{3}$) were following : den = 7.95 g/cm$^{3}$, T$_{c}$=340.deg. C, .epsilon.$_{33}$= 754, k$_{31}$=0.3 and Q.=1780. The 3-layer piezoelectric transformer by using a tape casting method showed a good monolithic structure, and its voltage setup ratio was 2.5 times higher than that of a single device by using bulk ceramics.s.s.