• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.5
• /
• pp.706-710
• /
• 2007

This study was to investigate the caponization effects on bone characteristics in male chickens, and the optimum testosterone implantation dosage on bone characteristics improvement. Healthy Single Comb White Leghorn cockerels were caponized at 12-wk-old and selected at 16-wk-old for a 10-wk feeding experiment. Fifteen intact male and caponized male chickens (capon) respectively were assigned to trial 1. Ten sham-operated chickens and 40 capons (randomly allocated into four treatments) were implanted with cholesterol (1.62 mm i.d., 3.16 mm o.d., $9.24{\pm}0.36$ mg), low (1 mm i.d., 3 mm o.d., $5.88{\pm}0.23$ mg), medium (1.62 mm i.d., 3.16 mm o.d., $9.81{\pm}0.17$ mg) or high dose (2 mm i.d., 4 mm o.d., $16.7{\pm}0.24$ mg) of testosterone in trial 2. The results from trial 1 showed that the tibia length, relative tibia weight, breaking strength, bending moment and stress in intact males were higher than capons (p<0.05). The blood phosphorus concentration in capons was higher than the intact male chickens (p<0.05). Caponization also resulted in more antrums and osteoclasts within periosteum and cortical bone from histological observation. In trial 2, the adverse impact of caponization on the bone breaking strength, bending moment and stress could be alleviated through medium dose testosterone implantation. It appears that caponization reduced androgen secretion hence influenced the biomechanical characteristics of bone (tibia) and these adverse effects could be alleviated through appropriate dose of testosterone implantation.

• Korean Journal of Materials Research
• /
• v.24 no.1
• /
• pp.53-59
• /
• 2014

The corrosion resistance of submerged entry nozzle (SEN) materials were investigated for high-class steel manufacturing. Composite samples were fabricated by mixing $ZrO_2$, $Al_2O_3$, MgO, mullite, spinel, and carbon. The raw materials were mixed with attrition milling, compacted in a uniaxial pressure of 200MPa and calcined at $1000^{\circ}C$ for 3 h in $N_2$ atmosphere. The bulk density and apparent porosity of the calcined samples were measured by the liquid displacement method in water using Archimedes's principle. The corrosion resistance of the samples were measured by cup test with mold powder at $1550^{\circ}C$ for 2 h. The microstructure and elemental analysis of samples were observed by scanning electron microscopy (SEM), energy dispersive spectrum (EDS), and X-ray diffraction pattern (XRD). The XRD result shows that the starting raw materials were crystalline phase. The microstructure of fabricated specimen was investigated before and after corrosion tests at $1000^{\circ}C$ and $1550^{\circ}C$ for 2h. $ZrO_2$-C composite showed good resistance in the slag corrosion test. Among the composite oxide materials, $ZrO_2-Al_2O_3$-C and $ZrO_2$-MgO-C showed better resistance than $ZrO_2$-C in the slag corrosion test. The diameter variation index of $ZrO_2$-C refractory was 16.1 at $1000^{\circ}C$ for 2 h. The diameter variation index of the $ZrO_2-Al_2O_3$-C refractory was larger than that of the $ZrO_2$-C refractory at $1550^{\circ}C$ for 2 h.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.23-24
• /
• 2014

Currently, cement and concrete industries have been contributing to the CO₂ emission worldwide. Because of that, the efforts to minimize CO₂ have been the subject of many researches. This study focus on the use of GGBFS and fly ash in mortar specimens as a patial replacement of cement. Because of the limitation of the initial compressive strength, the newly efforts to enhance the strength through CO₂ Curing was adapted. To accelerate the reaction with CO₂, MgO was replaced by percentage from 0 to 100%. Results showed that compressive strength values at 7 days with CO₂ curing done on specimens was higher than that with no CO₂ curing. Similar trend was observed at 14 days too. It is therefore appeared that CO₂ curing has an obvious effect on compressive strength development of mortar specimens.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.2
• /
• pp.156-163
• /
• 2007

This study was conducted to evaluate the liquefying efficiency of mixed organic fertilizer in different conditions. The organic fertilizer was composed of sesame oil cake, rice bran, fish meal, ground bone meal etc, and made by fermenting process. It included $23g\;kg^{-1}$, $17.0g\;kg^{-1}$, $23.9g\;kg^{-1}$, $290g\;kg^{-1}$ of N, $P_2O_5$, $K_2O$, organic matter, respectively. In one test, the mixed organic fertilizer was added in the proportion of 10% to water 90% and aerated continuously, for 2, 8 hours per day, and not aerated as control. In the other test, ratios of organic fertilizer to water were 5%, 10%, 20% and aerated for 2 hours a day. With the increase of liquefying time, pH, EC and $NH_4-N$ increased without relation to aeration time. After 10 days, liquid organic fertilizer aerated for 2 hours a day contained $634mg\;N\;kg^{-1}$, $68.1mg\;P_2O_5\;kg^{-1}$, $453mg\;K_2O\;kg^{-1}$, which was not significantly different from 8 hours a day or continuous aeration. Then extraction ratios of inorganic contents were 27.6%, 4.0% and 18.9%, respectively. Continuous aeration resulted in increasing the viable number of aerobic bacteria, spore forming bacteria and fungi in liquefied solution. Higher ratio of organic fertilizer to water increased EC, $NH_4-N$ and other inorganic matter contents, but decreased extraction ratio of nutrients in liquid fertilizer. The liquid organic fertilizer of 20% contained $1,140mg\;N\;kg^{-1}$, $35.4mg\;P_2O_5\;kg^{-1}$, $544mg\;K_2O\;kg^{-1}$ after 10 days. Then extraction ratios were 24.8%, 2.4% and 13.6%, respectively. The ratio of organic fertilizer to water was positively correlated with only spore forming bacteria, Pseudomonas spp. among microorganisms.

• Natural Product Sciences
• /
• v.18 no.1
• /
• pp.32-38
• /
• 2012

The herbs of Orostachys japonicus (Crassulaceae) have been used to treat gastric cancer, gastric ulcer or hemorrhage. Flavonoid glycosides, mainly kaempferol (Kp)- and quercetin (Qc) glycosides, have been isolated from O. japonicus; however, no quantitative information on those flavonol glycosides and no peroxynitritescavenging activity of the Orostachys extracts have been reported. In this study, Kp- and Qc glycosides were qualitatively and quantitatively analyzed by high-performance liquid chromatography (HPLC) in eight Orostachys and a Meterostachys species including O. japonicas, O. margaritifolius, O. chongsunensis, O. minuta, O. ramosus, O. malacophylla, O. latiellipticus, O. iwarenge, O. iwarenge for. magnus, and Meterostachys sikokiana distributed or cultivated in Korea. Distinctively, O. margaritifolius contained two flavonol 3,7-di-O-glycosides of Kp 3,7-di-O-glucoside and Kp 3-rhamnosyl-7-glucoside, but O. japonicus had two flavonol 3-O-rutinosides, Kp 3-rutinoside and Qc 3-rutinoside. The three species of O. margaritifolius (24.36 mg/g MeOH extract), O. japonicus (21.28 mg/g), and O. minuta (19.50 mg/g) showed relatively higher flavonoid contents. The flavonol glycosides were analyzed using eight standard compounds (Kp, Qc, Qc 3-O-rhamnoside, Qc 3-O-glucoside, Kp 3- O-rutinoside, Qc 3-O-rutinoside, Kp 3-O-rhamnosyl-7-O-glucoside, Kp 3,7-di-O-glucoside). The present HPLC method was validated to verify the linearity, precision, and accuracy. In addition, the peroxynitrite-scavenging activity was also discussed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.4
• /
• pp.190-195
• /
• 2009

Na-tetrasilicic fluorine mica powders were synthesized by skull melting method. The staring materials having chemical composition of $Mg_3(OH)_2Si_4O_{10}:Na_2SiF_6:SiO_2=8.3:24.8:66.9$ mol% were charged into a cold crucible of 13 cm in diameter and 14cm in height and heated by R.F. generator at working frequency of 2.84 MHz. The materials were maintained for 1hr as a molten state and cooled down in the container. In this study, the specific electric resistance of mica was estimated and the columnar and plate shaped mica were synthesized.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.4
• /
• pp.193-198
• /
• 2011

Effect of CaO addition on age hardening response has been studied by using optical microscopy, scanning electron microscopy and differential thermal analysis in AZ91 and CaO-containing ECO-AZ91 alloys. After solution treatment, the ${\beta}$($Mg_{17}Al_{12}$) phase formed during solidification mostly disappeared in the microstructure in the AZ91 alloy, whereas numerous ${\beta}$ precipitates containing Ca were still observed in the ECO-AZ91 alloy due to its enhanced thermal stability. The ECO-AZ91 alloy showed the delayed peak aging time and higher peak hardness compared with those of the AZ91 alloy. The activation energies for ${\beta}$ precipitation calculated by means of Kissinger method increased from 71.4 to 85.6 kJ/mole by the addition of CaO, which implies that CaO plays a role in reducing ${\beta}$ precipitation rate in the AZ91 alloy.

• Natural Product Sciences
• /
• v.24 no.4
• /
• pp.241-246
• /
• 2018

The herbs of Lamium takesimense Nakai (Lamiaceae) is used to treat spasmodic and inflammatory disease. The four polar compounds, ecdysterone, isoacteoside, rutin and lamiuside C, were isolated and identified from the BuOH fraction of the L. takesimense MeOH extract. HPLC quantification was performed on a Capcell Pak C18 column ($5{\mu}m$, $4.6mm{\times}250mm$) with a gradient elution of $H_2O$ and 0.05% acetic acid in MeOH. The HPLC method was validated in terms of linearity, sensitivity, stability, precision, and accuracy. The quantitative level in plant material was determined as the following order: lamiuside C (4, 3.75 mg/g dry weight) > ecdysterone (1, 1.93 mg/g) > isoacteoside (2, 1.32 mg/g) > rutin (3, 0.97 mg/g).

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.104.2-104.2
• /
• 2012

미국, 중국, 일본, 인도 등과 같은 세계 여러 국가들이 달 및 화성 탐사를 수행하고 있는 현시점에서 우리나라도 2025년에 달 탐사를 계획하고 있다. 인간에게 있어서 우주공간은 고에너지 환경의 영향을 많이 받는 곳이다. 향후 달, 화성과 같은 다른 행성으로의 이주를 생각하고 있는 현 시점에서 우리는 고에너지우주방사선 환경의 영향을 고려해야 한다. 지구에서의 인간은 지구 자기장과 대기에 의해 고에너지 우주선 환경으로부터의 영향을 덜 받는다. 그러나 달과 화성의 경우는 다르다. 달의 대기는 거의 없고 자기장도 무시할 정도로 매우 작으며, 화성 또한 자기장이 거의 없으며 대기 또한 얇아서 Galactic Cosmic Ray (GCR)나 Solar Energetic Proton (SEP) 등으로부터 인간은 많은 영향을 받을 수 있다. 이러한 위험으로부터 인간이 보호받을 수 있는 곳은 달과 화성의 지표 아래나 동굴이라고 볼 수 있다. 그래서 달 및 화성의 표면과 지하 영역에 대한 고에너지 우주선 환경의 깊이에 따른 영향을 분석하여 어느 정도로 두터운 천장을 가진 동굴이어야 우주인들이 상주하는 지하공간을 지구표면에서의 방사선 환경과 같은 수준으로 유지할 수 있는지를 추정해 보려고 한다. 달 표면 토양의 화학적 구성성분은 Maria와 Highlands로 구분되어 약간의 차이가 있다. 달의 Maria 토양은 $SiO_2$ - 45.4%, $Al_2O_3$ - 14.9%, CaO - 11.8%, FeO - 14.1%, MgO - 9.2%, $TiO_2$ - 3.9%, $Na_2O$ - 0.6%이고 Highlands의 토양은 $SiO_2$ - 45.5%, $Al_2O_3$ - 24.0%, CaO - 15.9%, FeO - 5.9%, MgO - 7.5%, $TiO_2$ - 0.6%, $Na_2O$ - 0.6%의 화학적인 구성비를 가진다. 또한 화성표면은 $SiO_2$ - 43.9%, $Al_2O_3$ - 8.1%, CaO - 6.0%, FeO - 18.1%, MgO - 7.1%, $Na_2O$ - 1.4%의 토양의 화학적인 구성비를 가지고 있다. 본 연구에서는 이러한 구성비를 가지고 있는 달과 화성 표면에 대한 우주방사선의 영향을 분석하기 위해서 GEANT4를 사용하여 수행한 전산 모사의 결과를 발표할 것이다.

• The Korean Journal of Nuclear Medicine
• /
• v.32 no.3
• /
• pp.298-304
• /
• 1998

Purpose: We evaluated the usefulness of Re-188 sulfur colloid for radiation synovectomy and therapy of intraperitoneal metastasis. Materials and Methods: We investigated the labeling efficiency of Re-188 sulfur colloid on various conditions. The stability of Re-188 sulfur colloid was observed at room temperature for 24 h and in human serum and synovial fluid for 72 h. The particle size distribution of Re-188 sulfur colloid was measured by filtering with various pore size filters. Animal experiment was performed in mice and rabbits. Results: The labeling efficiency of Re-188 sulfur colloid was $64.5{\pm}5.8%$ (n=5) at the conditions of sodium thiosulfate 40 mg, EDTA $Na_2.2H_2O$ 0.8 mg, $KReO_4$ 0.8 mg at pH 1. After purification, the radiochemical purity was higher than 99%. The stability of Re-188 sulfur colloid was high (>99%) at room temperature for 24 h and in human serum and synovial fluid for 72 h. The particle size distribution of Re-188 sulfur colloid was 0.3% ($<1{\mu}m$), 11.2% ($1{\sim}5{\mu}m$), 25.8% ($5{\sim}10{\mu}m$) and 52.8% ($>10{\mu}m$). In mice, 1 h postinjection of Re-188 sulfur colloid into tail vein, uptakes in lung, liver and muscle were $37.30{\pm}5.36$, $32.33{\pm}1.79$, $6.60{\pm}0.02%$ ID/organ respectively. After i.p. injection in mice, the uptakes of extraperitonial organs of Re-188 sulfur colloid at 1 and 24 h were $0.1{\pm}0.1$, $0.4{\pm}0.1%$ ID/organ, and the excretions through urine and feces (${\sim}70 h$) were low ($2.68{\pm}0.80$, $0.95{\pm}0.17%$). When Re-188 sulfur colloid was injected to synovial space of rabbit, the uptake in other organs except knee was very low. Conclusion: Re-188 sulfur colloid showed high labeling efficiency, stability and potency for clinical use.