• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.130-136
• /
• 2005

The effects of additional Mg content, the size and volume fraction of reinforcement phase on the mechanical properties of ceramic particle reinforced aluminium matrix composites fabricated by pressureless metal infiltration process were investigated. The hardness of $SiC_p/AC8A$ composites increased gradually with an increase in the additive Mg content, while the bending strength of $SiC_p/AC8A$ composites increased with an increase in additive Mg content up to 5%. However, this decreased when the level of additive Mg content was greater than 5% due to the formation of coarse precipitates by excessive Mg reaction and an increase in the porosity level. The hardness and strength of the composites increased with decreasing the size of SiC particle. It was found that the composites with smaller particles enhanced the interfacial bonding than those with bigger particles from fractography of the composites. The hardness of $Al_2O_{3p}/AC8A$ composites increased gradually with an increase in the volume fraction, however, the bending strength of $Al_2O_{3p}/AC8A$ composites decreased when the volume fraction of alumina particle was greater than 40% owing to the high porosity level.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.12
• /
• pp.1337-1344
• /
• 2007

In this research, we synthesized potassium ferrate(VI) acting as an oxidant, disinfectant, and coagulant, and used it to treat natural organic matter(NOM, HA and FA) in river water. The removal efficiencies obtained by $UV_{254}$ ranged from 20.7 to 73.6% for 10 mg/L HA and from 52.6 to 77.5% for 10 mg/L FA in Nakdong river sample as the ferrate dose varied from 2 to 46 mg/L(as Fe). However, the removal efficiencies by TOC analysis ranged from 0 to 20.3% for HA and from 0 to 26.6% for FA at the same ferrate doses. The removal efficiencies of NOM increased either with decreasing pH or with increasing temperature. The removal efficiency of HA by ferrate was comparable to those by traditional coagulants such as $Al_2(SO_4)_3{\cdot}18H_2O$, $FeSO_4{\cdot}7H_2O$, and FeO(OH). The reaction between ferrate and HA reached a steady state within 60 seconds, showing first-order with respect to the reaction time. The removal efficiencies of HA by traditional coagulants were improved by pretreatment of HA using a small amount of ferrate.

• Korean Journal of Microbiology
• /
• v.40 no.4
• /
• pp.275-281
• /
• 2004

Our previous research has demonstrated that the bacterium, Pseudomonas sp. NFQ-l capable of utilizing quin­oline (2,3-benzopyridine) as the sole source of carbon, nitrogen, and energy was isolated and characterized [Yoon et ai. (2003) Kor. J. Biotechnol. Bioeng. 18(3):174-179]. In this study, we have found that Pseudomonas sp. NFQ-l could degrade quinoline as well as benzoate, and extended this work to characterize the catechol 1,2­dioxygenase (C1,2O) purified from the bacterium cultured in benzoate media. Initially, C1,2O has been purified by ammonium sulfate precipitation, gel permeation chromatography, and Source 15Q. After Source 15Q, puri­fication fold was increased to approximately 14.21 unit/mg. Molecular weight of C1,2O was about 33 kDa. Physicochemical characteristics (e.g., substrate specificity, Km, Vmax, pH, temperature and effect of inhibitors) of purified C1,2O were examined. C1,2O demonstrated the activity for catechol, 4-methylcatechol and 3-meth­ylcatechol as a substrate, respectively. The Km and Vmax value of C1,2O for catechol was 38.54 ${\mu}M$ and $25.10\;{\mu}mol{\cdot}min^{-1}{\cdot}mg^{-1}.$ The optimal temperature of C1,2O was $30^{\circ}C$ and the optimal pH was approximately 8.5. Metal ions such as $Ag^+,\;Hg^+,\;Ca^{2+},\;and\;Cu^{2+}$ show the inhibitory effect on the activity of C1,2O. N-terminal amino sequence of C1,2O was analyzed as ^1TVKISQSASIQKFFEEA^{17}.$ In this work, we found that the amino acid sequence of NFQ-l showed the sequence homology of 82, 71, 59 and $53\%$ compared with C1,2O from Pseudomonas aeruginosa PA0l, Pseudomonas arvilla C-1., P. putida KT2440 and Pseudomonas sp. CA10, respectively.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.87-90
• /
• 2000

The hydrogeochemical and isotopic studies on deep groundwater in the Munkyeong area, Kyeongbuk province were carried out. $CO_2$-rich groundwater (Ca-HC $O_3$ type) is characterized by low pH (5.8~6.5) and high TDS (up to 2,682 mg/L), while alkali groundwater (Na-HC $O_3$ type) shows a high pH (9.I~10.4) and relatively low TBS (72~116 mg/L). $CO_2$-rich water may have evolved by $CO_2$ added at depth during groundwater circulation. This process leads to the dissolution of surrounding rocks and Ca, Na, Mg, K and HC $O_3$ concentrations are enriched. The low Pc $o_2$ (10$^{-6.4}$atm) of alkali groundwaters seems to result from the dissolution of silicate minerals without a supply of $CO_2$. The $\delta$$^{18}$ O and $\delta$D values and tritium data indicate that two types of deep groundwater were both derived from pre-thermonuclear meteoric water. The carbon Isotope data show that dissolved carbon in the $CO_2$-rich water was possibly derived from deep-seated $CO_2$ gas. The $\delta$$^{18}$ S values of dissolved sulfate show that sulfate reduction occurred at great depths. The application of various chemical geothermometers on $CO_2$-rich groundwater shows that the calculated deep reservoir temperature is about 130~175$^{\circ}C$. Based on the geological setting, water chemistry and environmental isotope data, each of the two types of deep groundwater represent distinct hydrologic and hydrogeochemical evolution at depth and their movement is controlled by the local fracture system.m.

• Journal of Veterinary Clinics
• /
• v.36 no.6
• /
• pp.306-313
• /
• 2019

It is important to identify the most suitable anesthetic agent that has minimal side effects to be able to control and perform surgeries on bears. In this study, we examined and compared the induction and recovery times as well as the physiological changes occurring during anesthesia induced by medetomidine-zolazepam/tiletamine (MZT) and xylazine-zolazepam/tiletamine (XZT) at general anesthesia for laparoscopic salpingectomy in 326 female Asiatic black bears. The body temperature, heart rate, respiratory rate, and levels of PaO₂ and EtCO₂ were the physiological changes measured during surgical procedures in female bears after anesthesia. In addition, the levels of pO₂, pCO₂, and sO₂ were measured using a portable blood gas analyzer. To induce recovery from anesthesia, bears anesthetized with MZT were intravenously administered atipamezole and bears anesthetized with XZT were intravenously administered yohimbine. The combination MZT, at dosages of 0.019 ± 0.001 mg/kg for medetomidine and 1.4 ± 0.1 mg/kg for ZT, or the combination XZT, at dosages of 2.0 ± 0.1 mg/kg for xylazine and 3.0 ± 0.1 mg/kg for ZT, proved to be reliable and effective in anesthetizing Asiatic black bears for a 40-min handling period for routine clinical procedures. The average anesthesia induction times were 16.5 ± 0.95 min for the bears in the MZT group and 12.0 ± 0.44 min for those in the XZT group. A significant difference was noted between the two drugs (P < 0.001) in terms of the average anesthesia induction time. The anesthesia induction time was shorter for bears with lower body weights than those with higher body weights (P < 0.05). The recovery time of MZT was significantly faster than that of XZT (11.3 ± 0.45 min vs. 18.5 ± 0.83 min) (P < .001). The bears anesthetized with MZT exhibited lower cardiopulmonary suppression than those anesthetized with XZT (P < 0.05). The body temperatures and EtCO₂ of bears in the M ZT group were significantly lower than those in the XZT group as time progressed after anesthesia (P < 0.05). The average pO₂ before the bears were supplied with oxygen was 64.8 ± 3.7 mmHg, but it increased to 211.5 ± 42.5 mmHg afterwards (P < 0.001). In conclusion, our results indicate that bears anesthetized with MZT have longer anesthesia induction time, shorter recovery time, slower heart and respiratory rates, and lower body temperatures and EtCO₂ than those anesthetized with XZT. These findings suggest that XZT is preferable to MZT, warranting further research on its uses and clinical responses in bears.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.22-29
• /
• 2014

Recycling process of iron should be developed for efficient recovery of neodymium (Nd), rare metal, from acid-leaching solution of Nd magnet. In this study, $FeCl_3$ solution as iron source was used for preparation of iron nano particles with the condition of various factors, such as, reductant, and surfactant. $Na_4P_2O_7$ and Polyvinylpyrrolidone (PVP) as surfactants, $NaBH_4$ as reductant, and palladium chloride ($PdCl_2$) as a nucleation seed were used. Iron powder was analyzed by using XRD, SEM for measuring shape and size. Iron nano particles were prepared at the ratio of 1:5 (Fe (III) : $NaBH_4$). Size and shape of iron particles were round-form and 50 ~ 100 nm size. Zeta-potential of iron at the 100 mg/L of $Na_4P_2O_7$ was negative value, which was good for dispersion of metal particle. When $Na_4P_2O_7$ (100 mg/L), PVP($FeCl_3:PVP$ = 1 : 4, w/w) and Pd($FeCl_3:PdCl_2$ = 1 : 0.001, w/w) were used, iron nano particles which were round-shape, well-dispersed and near 100 nm-sized range. In this condition, $FeCl_3$ solution changed with spent Nd leachate solution, and then it is possible to be made round-formed iron nano particles at pH 9 and at the reaction bath over 20 L which is not include any surfactant.

• Economic and Environmental Geology
• /
• v.28 no.4
• /
• pp.381-388
• /
• 1995

The petrographic, geochemical, and physical properties of the Jangseong and Chinese coals were investigated. The most common mineral matters of Jangseong coal are kaolinite, muscovite, sericite, illite, quartz and pyrophyllite. Mineral matters in Chinese coal are mainly composed of quartz, calcite, dolomite and kaolinite. Jangseong coal ash has higher content of $Al_2O_3$, $K_2O$, $TiO_2$, As, Rb and V, and lower content of CaO, MgO, $Na_2O$, $Fe_2O_3$ and $P_2O_5$ than those of Chinese coal ash. The liquid limit and the plasticity index of Jangseong coal were compared with those of Chinese coal. The result shows that the briquetting ability of Jangseong coal is a little bit better than that of Chinese coal. The briquetting ability is found to be principally dependent on the type and the content of mineral matter in coal, especially clay mineral.

• The Journal of Engineering Geology
• /
• v.15 no.3
• /
• pp.349-363
• /
• 2005

Many Quaternary faults are recognized as thin gouge and narrow cataclastic zone juxtaposing the Bulguksa granite and Quaternary deposit bed in the eastern block of the Using Fault, Korea: Gaegok 1, Caegok 2, Singye, Madong Wonwonsa and Jinhyeon faults. This study was performed to calculate chemical change, volume change, silica loss and fluid-rock ratio taken place in gouge zones of these Quaternary faults using XRF, XRD, EPMA. The chemical compositions of fault rocks reveal that the fault gouges are depleted in $SiO_2,\;Na_2\;O,and\;K_2O$ and enriched in $Al_2O_3,\;Fe_2O_3,\;P_2O_5,\;MgO,\;MnO,\;CaO,\;and\;LOI(H_2O+CO_2)$ relative to protoliths. The fact that there is enrichment of relatively immobile elements and depletion of the more soluble elements in the fault gouges relative to protoliths can be explained by fluid-assisted volume loss of $56\%$ for Caegok 1 fault, $22\%$ for Caegok 2 fault,$34\%$, for Singye fault, $8\%$ for Madong fault, $2\%$ for the Wonwonsa fault and $53\%$ for the linhyeon fault. Madong fault and Wonwonsa fault where ratios of the volume change, silica loss and fluid-rock are low might have acted as a closed system for fluid activity, whereas Caegok 1 fault and Jinhyeon fault with high ratios in those factors be an open system. The volumetric fluid-rock ratios range $10^2\sim10^4$ for all faults, being highest in Caegok 1 fault and Jinhyeon fault whose fluid activity was most significant.

• Journal of Life Science
• /
• v.12 no.1
• /
• pp.43-48
• /
• 2002

An actinomycetes which produces fibrinolytic enzyme was isolated from soil. Characteristics of the isolated strain and the optimal conditions for the productions of fibrinolytic enzyme were summarized as follows; The fibrinolytic enzyme production strain generates gray airmycelium and had about 0.6~0.8$\times$0.4~0.8${\mu}{\textrm}{m}$ cylindrical spore, smooth surface and formed spore chain of 10~40 spores. We have identified this strain as Streptomyces sp. JK-20. This strain was able to grow up at 20~32$^{\circ}C$ and its optimum growth temperature and pH was 24$^{\circ}C$ and pH 6.0, respectively. The optimal conditions for porducing fibrinolytic enzyme; carbon source, nitrogen source, metal ions and phosphorous sources was 1% xylose, 0.5% yeast extract, 0.5% polypepton, 0.1% MgSO$_4$.7$H_2O$ and 0.1% NaH$_2$PO$_4$.2$H_2O$, respectively. This strain showed the highest productivity of fibrinolytic enzyme after the fourth day under such optimal culture conditions.

• Korean Journal of Chemical Engineering
• /
• v.35 no.11
• /
• pp.2207-2219
• /
• 2018

Activated carbon (AC) was synthesized from Phoenix dactylifera stones and then modified by $CoFe_2O_4$ magnetic nanocomposite for use as a Cr(VI) adsorbent. Both $AC/CoFe_2O_4$ composite and AC were fully characterized by FTIR, SEM, XRD, TEM, TGA, and VSM techniques. Based on the surface analyses, the addition of $CoFe_2O_4$ nanoparticles had a significant effect on the thermal stability and crystalline structure of AC. Factors affecting chromium removal efficiency like pH, dosage, contact time, temperature, and initial Cr(VI) concentration were investigated. The best pH was found 2 and 3 for Cr adsorption by AC and $AC/CoFe_2O_4$ composite, respectively. The presence of ion sulfate had a greater effect on the chromium sorption efficiency than nitrate and chlorine ions. The results illustrated that both adsorbents can be used up to seven times to adsorb chromium. The adsorption process was examined by three isothermal models, and Freundlich was chosen as the best one. The experimental data were well fitted by pseudo-second-order kinetic model. The half-life ($t_{1/2}$) of hexavalent chromium using AC and $AC/CoFe_2O_4$ magnetic composite was obtained as 5.18 min and 1.52 min, respectively. Cr(VI) adsorption by AC and $AC/CoFe_2O_4$ magnetic composite was spontaneous and exothermic. In general, our study showed that the composition of $CoFe_2O_4$ magnetic nanoparticles with AC can increase the adsorption capacity of AC from 36 mg/L to 70 mg/L.