• Korean Journal of Plant Tissue Culture
• /
• v.27 no.6
• /
• pp.461-468
• /
• 2000

For the enhancement of ginsenoside production in hairy roots cultures of Panax ginseng, the uptake rate of inorganic elements and ginsenoside contents were investigated by different concentrations of about phosphorus (P $O_{4}$$^{[-10]}$ ) and nitrogen (N $H_{4}$$^{+}$, N $O_{3}$$^{[-10]}$ ) sources. According to increased phosphorus and nitrogen sources, the uptake rate of $Mg^{2+}$ and F $e^{2+}$ in ginseng hairy roots were significantly increased. The uptake rate of F $e^{2+}$ in 5.15 mM N $H_{4}$$^{+}$ was higher at 47.5% than that in 20.6 mM, whereas that of C $u^{2+}$ in 10.3 mM were higher at 123.1% than that in 41.2 mM. These results indicated that phosphorus and nitrogen sources act not only elevated growth of hairy roots but also the uptake-enhancement of the irons and other ions. The optimum concentration of phosphorus and nitrogen sources for the contents of free sugars were different to kinds of free sugars. The optimum concentration of phosphorus and nitrogen sources for the ginsenoside formation in ginseng hairy roots cultures were highest at the most low concentration of all. The contents of ginsenoside-R $b_2$and -Rc in 0.31 mM P $O_{4}$$^{[-10]}$ were increased to 44.7% and 29.9% than that in 0.62 mM P $O_{4}$$^{[-10]}$ , respectively. The contents of ginsenoside-R $b_2$ and -Rc in 5.15 mM N $H_{4}$$^{+}$ were increased to 21.7% and 31.9% than that in 10.30 mM N $H_{4}$$^{+}$, respectively. The contents of ginsenoside-R $b_2$and -Rc in 4.7 mn N $O_{3}$$^{[-10]}$ were also increased to 17.6% and 25.5% than that in 9.4 mM N $O_{3}$$^{[-10]}$ , respectively. These results indicate that enhancement of the ginsenoside formation in ginseng hairy roots was feasible by new medium modulation of concentration of phosphorus and nitrogen sources.rogen sources.

• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.410-416
• /
• 2004

The objective of this investigation was to evaluate applicability of precoat filtration that can be substituted for rapid sand filter of conventional water treatment system(CWTS). Precoat filter used in this experiment are candle filter. Element disk of candle are pore size $10{\mu}m(R),\;20{\mu}m(B)$ And diatomaceous earth are cake pore size $3.5{\mu}m$(Standard Super- Cel; A), $7{\mu}m$(Hyflo Super-Cel; B) and $17{\mu}m$(Celite 545RV; C). $2kg/m^2$ diatomaceous earth is used for precoating, it coated candle in $5{\sim}6mm$ thickness. 1. Al adsorption dosages by diatomaceous earth used in experimental we Hyflo Super-Cel 0.843mg/g, Standard Super-Cel 0.782 mg/g and Celite 545RV 0.766 mg/g. 2. Filtrate of precoat filter during 60min are R-C combination 20.7($m^3/m^2$)>B-C 18.3($m^3/m^2$)>B-B 15.0($m^3/m^2$)> R-B 12.9($m^3/m^2$)> R-A 11,093($l/m^2$). 3. Water quality of precoat filter effluent are thus. $KMnO_4$ consumption are $1.10{\sim}2.20mg/l$, removal rate are $30.9{\sim}65.6\%$. They are R-A 1.10(mg/l)(removal rate $65.6\%$). R-C(2.20 mg/l)(removal rate $30.9\%$). 4. $Al^{3+}$ are not detected with all combination, removal rate $100\%$. 5. Considering water quality and flux, continued running time of R-A combination is 7 hr. Accumulated filtrate are $74.4 m^3/m^2$, average flux is $177.2 l/m^2{\cdot}min$. And filtrate per diatomaceous earth 1g are 37.2 l. 6. R-A effluent's water quality are $KMnO_4$ Consumption 1.10(mg/l), DOC 1.161 mg/1, Al 0.0 mg/1, $UV_{254}$ 0.016/cm, Turbidity 0.1(NTU). R-A combination is suitable to precoat filtration for the settling basin effluent treatment.

• Journal of the Korean Ceramic Society
• /
• v.17 no.4
• /
• pp.213-216
• /
• 1980

A glass-ceramics material of composition %SiO_2$: 38.50, $Al_2O_3$: 26.00, $Na_2O$: 18.00, CaO: 6.00, MgO: 4.00, $TiO_2$: 7.50 was strengthened by coating a series of glazes$(SiO_2-B_2O_3-Al_2O_3-CaO-PbO-Na_2O-)$, which has lower thermal expansion coefficient than that of the glass-ceramics. The thermal expansion coefficient of the glazes ranges $80~90{\times}10^{-7}$cm/cm/$^{\circ}C$, whereas that of the glass-ceramics is $115{\times}10^{-7}$cm/cm/$^{\circ}C$. The glass-ceramics was identified to be composed of nepheline, carnegieite low form, and meta sodium silicate crystal by X-ray diffraction phase analysis. The glaze, having lower melting point and appropriate thermal expansion coefficient, was tried to be stable and good at secondary heat treatment.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.533-536
• /
• 2008

This study is the application of phosphate magnesia cement for solidification of soils. The object of the study is the application of the pavment of the farm roads. The new pavement method must be environmental, ecologic and durable. So, for solidification of farm road's soil, we use magnesia cement as quick setting, high strength materials. At magnesia phosphate cement, mixing ratio of mono ammonium phosphate and magnesia is 4:6 and w/b is 50 wt%, it show 14 MPa of compressive strength, and high hydration heat. Solidified soils that mixing ratios of magnesia cement and soil are 4:6 and 5:5 have very high durability for freezing and thawing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.7
• /
• pp.546-551
• /
• 1998

$Mn{1-X}Fe{2+X}O_4, Mg_{1-X}Fe_{2+X}O_4$ (x=0.0, 0.025, 0.1, 0.2) for negative temperature coefficient (NTC) thermistor was prepared by calcination at $800^{\circ}C$ and sintering at form 1100 to $1250^{\circ}C$ with $50^{\circ}C$ intervals. The best linear property was obtained in the Mn-based sample sintered at $1200^{\circ}C$ with x=0.0 composition. Temperature coefficient of resistance, $\alpha$, was $-5.6%/^{\circ}C$ in the Mn-based sample, $-5.2%/^{\circ}C$ in the MM-based sample, and $-1.6%/^{\circ}C$ in the Mg-based sample. thermistor parameter, B, was in the range of 2665~7780 K. The results show the possibility that Mn-Ni-Co based thermistor could be substituted by the composition used in this study.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.2
• /
• pp.118-123
• /
• 2010

The eco-friendly technologies have been extended as matter of international concern due to various diseases and syndromes according to an environmental pollution. In this study, we have manufactured a ceramic cluster with thick film type for anion generation equipment which is maximized anion but minimized ozone contents generated. To develop the formulation of ceramic cluster, we conducted the $Mg_2SiO_4$ powders doped with 10 vol% glass frits as Na-Zn-B-O system and sintered at $1050^{\circ}C$ for 2 hours in air for starting materials and investigated the matching properties between the Ag-Pd electrode and the starting materials. The sintered sample for the composition of cluster has 6.7 of dielectric constant and 32 kV/mm of withstand voltage. The yield of anions was measured according to an electrode pattering, discharge gap between electrode, and thickness of electrode protective layer in the cluster of thick film type. We have manufactured the ceramic clusters with optimized thick film structure that have an anion over a hundred particles and the ozone of 0.6 ppb generated.

• Microbiology and Biotechnology Letters
• /
• v.26 no.4
• /
• pp.369-372
• /
• 1998

Microbial insecticide formulations were prepared by liquid and semi-solid fermentations using Bacillus thuringiensis subsp. kurstaki, HL-106 (BTK-HL106), B. thuringiensis subsp. israelensis HL-63 (BTI-HL63) and B. sphaericus 1593 (BS-1593) strains. The liquid fermentation medium contained molasses 2%, dextrose 1.5%, peptone 2%, D-xylose 0.025%, CaCl$_2$ 0.1%, K$_2$HPO$_4$ 0.1%, KH$_2$PO$_4$ 0.1%, MgSO$_4$$.$7H$_2$O 0.03%, FeSO$_4$$.$7H$_2$O 0.002%, ZnSO$_4$$.$7H$_2$O 0.02%. The composition of the semi-solid fermentation medium was rice bran 45.2%, zeolite 31%, yeast powder 0.02%, corn powder 5%, dextrose 3%, lime 0.3%, NaCl 0.06%, CaCl$_2$ 0.02%, and H$_2$O 15.42%. Insecticide formulations produced in the liquid fermentation named BTK-HL106, BTI-HL63 and BS-1593 pesticides and those in the semi-solid fermentation were designated as BTK-HL106-1, BTI-HL63-1 and BS-1593-1 pesticides, respectively. The number of spore (endotoxin crystals) was 2.65${\times}$10$\^$9/ spores per $m\ell$ in the BTK-HL106 and 3.5${\times}$10$\^$10/ in the BTK-HL106-1 3.8${\times}$10$\^$9/ spores in the BTI-HL63 and 7.0${\times}$10$\^$10/ in the BTI-HL63-1, and 7.5${\times}$10$\^$9/ in the BS-1593 and 1.4${\times}$10$\^$10/ in the BS-1593-1. The spores in the BS-1593 formulation was produced two times more than the other formulations. The spores in the BTI-HL63-1 were contained twice than those in the BTK-HL106-1, and five times than those in the BS-1593-1. The results indicated that spore (endotoxin crystals) productions in the semi-solid fermentation increased about ten times than those in the liquid fermentations. $LC_{50}$s of the BTI-HL63 and BS-1593 were 4.5 $\mu\textrm{g}$, and those of the BTI-HL63-1 and BS-1593-1 were 1.5 $\mu\textrm{g}$. $LC_{50}$ of the BTK-HL106 was 1.5 mg and that of the BTK-HL106-1 was 0.9 mg. The $LC_{50}$s of the formulations in the semi-solid fermentations showed about two to three times higher than those in the liquid fermentations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.1
• /
• pp.47-52
• /
• 1989

Aspergillus awamori, B-2 which has a high ability to decolorize melanoidin was selected among various fungi. Aspergillus awamori, B-2 showed the highest decolorization activity when it was cultivated in a melanoidin medium containing 3.0% glucose, 0.5% yeast extract, 0.1 % $KH_2PO_4\;and\;0.05%\;MgSO_4{\cdot}7H_2O$ at an initial pH 7.0 at $37^{\circ}C$ for 5 days. Mycelia immobilized system with. Ca-alginate was more effective on melanoidin decolorization activity showed approximately 70% in 10 days under the optimal conditions. Continuous decolorization of melanoidin using, reuse of immobilized mycelia showed an almost constant decolorization of abort 60-70% for 15 days.

• Journal of Nutrition and Health
• /
• v.40 no.7
• /
• pp.606-615
• /
• 2007

This study was performed to investigate anti-thrombogenic, anti-inflammatory effects of n-BuOH (B) and $CH_2Cl_2$ (MC) fractions extracted from Sancho (Zanthoxylum. schinifolium) leaves in rats fed high fat diets. The experimental animal groups were consisted of eight including one 5% fat (N) and one 20% fat (H) without the test materials in diets and six H groups of feeding three levels (50, 100 and 150 mg/day) of the B and the MC fractions from Z. schinifolium, respectively. Plasma activated partial thromboplastin times and thrombin times of H group were decreased compared to the N group, but they were increased by feeding the MC fraction of 50 mg and over. Polymorphonuclear leukocyte 5#-lipo-xygenase activities and leukotriene $B_4$ contents of the H group were significantly increased compared to the N group, but they were decreased in the 100 mg and 150 mg of B fraction or the 150 mg of MC fraction fed groups. Liver cytochrome $P_{450}$, $O_2^-$, $H_2O_2$ and GSSG contents were increased by the high fat diet but decreased by feeding the B fraction or the MC fraction, while GSH content and glutathione S-transferase activity lowered by high fat diet were increased by feeding the two solvent fractions. The effects of the solvent fractions were evident at the level of 100 mg/day and over. The present results confirmed that two solvent fractions from the leaves of Z, schinifolium have enhancing effects on anti-thrombosis and anti-inflammation partly by antioxidant action and partly by direct modulation of the respective processeds. In conclusion, the n-BuOH and $CH_2Cl_2$ fractions from leaves of Z, schinifolium can be utilized as the proper ingredients of functional foods for preventing chronic degenerative disease.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.3
• /
• pp.7-9
• /
• 2014

Single-crystal like $MgB_2$ thin film was grown on (000l) $Al_2O_3$ substrate by using hybrid physical-chemical vapor deposition (HPCVD) system. Single crystal properties were studied by X-ray diffraction (XRD) and the full width at half maximum (FWHM) of the (0001) $MgB_2$ peak is $15^{\circ}$, which is very close to that has been reported for $MgB_2$ single-crystal. It indicates that the crystalline quality of thin film is good. Temperature dependence on resistivity was investigated by physical property measurement system (PPMS) in various applied fields from 0 to 9 T. The upper critical field ($H_{c2}$) and irreversibility field ($H_{irr}$) were determined from PPMS data, and the estimated values are comparable with that of $MgB_2$ single-crystals. The thin film shows a high critical temperature ($T_c$) of 40.4 K with a sharp superconducting transition width of 0.2 K, and a high residual resistivity ratio (RRR=21), it reflects that $MgB_2$ thin film has a pure phase structure.