• 식물조직배양학회지
• /
• 제24권5호
• /
• pp.285-289
• /
• 1997

꿩의비름(Sedum-erythrostichum Miq.)의 잎과 줄기의 절편을 몇 가지의 호르몬이 첨가된 MS 배지에 배양하였다. 배양 2주후 2.0 mg/L. 2,4-D와 1.0 mg/L BA를 혼합한 배지에서 잎의 절편으로부터 100%의 캘러스가 형성되었다. 이 캘러스를 2.0 mg/L 2,4-D와 1.0 mg/L BA를 혼합한 배지로 계대배양하였을때 캘러스의 생장이 왕성하였다. 또한 2.0 mg/L NAA와 1.0 mg/L BA를 혼합한 배지로 계대배양한 캘러스로부터 부정아의 분화가 왕성하였다. 생장호르몬이 없는 배지에서 분화된 신초는 1.0 mg/L IAA를 첨가한 배지에서 발근하여 완전한 식물체로 생장하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권4호
• /
• pp.20-23
• /
• 2020

Among many variables in processing the high performance MgB2 bulk superconductors, simple and important approach is to optimize the size dependence of the Mg & B raw powders. The present study is dedicated towards the variation in superconducting properties of MgB2 depending upon the various combination of Mg & B powders with the two different particle sizes respectively. From morphological investigation of the MgB2 samples, narrow and long pores are observed when the larger Mg powders are used, whereas it is rather like the oval shapes with the smaller Mg powders. Also, it can be seen that the connectivity of the MgB2 samples is much enhanced with the smaller size of the B powders. Jc-H properties of the MgB2 samples also indicate that the highest Jc can be obtained when using the smaller size of the B powder with the combination of the smaller Mg powders than that of the larger Mg powders. If the cases with the larger B powers, it is more favorable to select the larger Mg powders with the better Jc-H properties considering shorter diffusion length of Mg and more homogeneous mixture between the Mg & B powders.

• 한국진공학회지
• /
• 제9권2호
• /
• pp.144-149
• /
• 2000

Cu(4.5at.% Mg) target을 이용하여 sputtering에 의해 증착된 Cu(Mg) alloy박막의 열처리시 형성되는 산화 방지막 MgO의 박막 특성에 영향을 주는 인자에 대해 살펴보았다. MgO 박막의 산화방지 능력 및 막질에 영향을 주는 인자로는 열처리 온도, $O_2$ 압력, Mg 농도 등으로 나타났다. MgO 박막의 두께는 열처리 온도가 증가함에 따라 증가하다 $500^{\circ}C$ 이상에서는 150 $\AA$ 정도의 성장한계두께를 나타내었다. 표면에 형성되는 MgO 박막은 $O_2$압력이 낮을수록, Mg의 농도가 높을수록 치밀한 MgO가 형성되어 산화방지에 우수한 특성을 보였으며 전 열처리 과정인 진공 열처리 공정은 1at.%정도의 낮은 Mg 농도에서도 치밀한 MgO형성에 매우 효과적임이 확인되었다. 본 연구에서 Cu(Mg) alloy박막의 열처리를 통해 낮은 저항의 Cu박막의 형성과 동시에 산화방지에 우수한 특성을 보이는 MgO 박막을 열처리 온도, $O_2$ 압력, Mg 농도 등의 최적조건을 이용하여 얻어질 수 있음을 확인하였다.

• 한국잡초학회지
• /
• 제16권3호
• /
• pp.221-229
• /
• 1996

잔디의 형질전환체계를 확립하기에 앞서 효율적인 재분화 체제를 확립하고자 식물생장 조절제, 탄소원 및 $AgNO_3$가 재분화에 미치는 영향을 조사한 결과는 다음과 같다. 1. 배지(MS와 N6) 및 식물생장조절제(2,4-D와 NAA)에 따른 Korean lawngrass(Zoysia japonica Steud.)와 penncross creeping bentgrass(Agrostis palustris Huds.)의 캘러스유기는 두 품종 모두 N6배지에서 보다 MS배지에서 좋았으며, Korean lawngrass는 2,4-D 1mg/L 첨가 MS배지에서 그리고 penncross creeping bentgrass는 2,4-D 2mg/L첨가 MS배지에서 가장 좋았다. 2. 캘러스증식은 두 품종 모두 2,4-D 2mg/L함유 MS배지에 NAA 0.2mg/L 첨가하였을때 가장 좋았고, kinetin을 Korean lawngrass의 경우 0.2mg/L, penncross creeping bentgrass의 경우 0.3mg/L을 첨가하였을 때 가장 좋았다. 3. 식물체 재분화 실험에서 Korean lawngrass 잎 절편체의 재분화율은 MS배지에서 2,4-D 2mg/L+NAA 0.2mg/L+kinetin 0.1mg/L 조합처리시 44% 그리고 stock callus의 재분화율은 2,4-D 2mg/L+NAA 0.2mg/L+kinetin 0.3mg/L 조합처리시 32%이었다. penncross creeping bentgrass의 잎 절편체와 stock callus의 재분화율은 kinetin 0.3mg/L 농도에서 각각 80% 외 67%이었다. 4. Korean lawngrass의 경우 전술한 재분화 배지에 $AgNO_3$ 1mg/L를 첨가하였을 때 3~4%그리고 pencross creeping bentgrass의 경우 2mg/L를 첨가하였을 때 10~16%의 재분화율이 향상되었다.

• 대한핵의학회지
• /
• 제19권1호
• /
• pp.127-136
• /
• 1985

To evaluate change of serum $beta_2-microglobulin$ concentration$(s\beta_2-MG)$ and the usefulness of $s\beta_2-MG$ and $s\beta_2-MG/serum$ creatinine concentration(sCr) ratio in various renal diseases, $s\beta_2-MG$ and sCr were measured in 25 normal controls and 90 patients of various renal diseases(16 cases of glomerulonephritis, 12 cases of acute renal failure, 8 cases of chronic renal failure, 24 cases of nephrotic syndrome, 15 cases of tubulointerstitial diseases and 15 cases of lupus nephritis) using $Phadebas^\circledR$ $Beta_2-Micro$ Test kits. The results were as follows; 1) In normal control, the mean value of $s\beta_2-MG$ was $1.65{\pm}0.41mg/l$ and the mean value of $s\beta_2-MG/sCr$ ratio was $0.14{\pm}0.05$. 2) In various renal diseases, the mean value of $s\beta_2-MG$ was $6.74{\pm}5.47mg/l$. The mean value of $s\beta_2-MG/sCr$ ratio was $0.24{\pm}0.11$ and significantly elevated than that of normal control. (p<0.05) 3) The correlation between $s\beta_2-MG$ and sCr in glomerular and tubulointerstitial disease was log $s\beta_2-MG-0.90$ log sCr-0.48 and its correlation coefficient was 0.78(p<0.05). 4) In glomerular disease, the correlation between $s\beta_2-MG$ and sCr was log $s\beta_2-MG-0.89$ log sCr-0.46(r - 0.76) and in tubulointerstitial disease, it was log, $s\beta2-MG-0.95$ log sCr-0.59 (r-0.87). There was no significant difference between the two groups(p<0.05). 5) Among 32 cases of glomerular and tubulointerstitial disease patients, whose sCr was within normal range, 17 cases showed elevated $s\beta_2-MG$. The mean values of $s\beta_2-MG/sCr$ ratio in these patients was $0.30{\pm}0.14$ and significantly elevated than that of normal control(p<0.05). 6) In 15 cases of lupus nephritis, 12 cases showed elevated $s\beta_2-MG$ with normal sCr and 12 cases showed elevated $s\beta_2-MG/sCr$ ratio. With above results, it was found that the $s\beta_2MG$ can be used as an index of glomerular filtration rate as in the case of sCr and that $s\beta_2-MG/sCr$ ratio can be used as a tool in early detection of slightly decreased glomerular filtration rate and in detection of the renal disease of increased $\beta_2-MG$ production.

• 한국수산과학회지
• /
• 제18권6호
• /
• pp.538-544
• /
• 1985

부산시내에 산재하고 있는 약수터 중에서 시민의 이용 빈도가 높은 5개 지점을 선정하여 이들의 수질관리에 필요한 기초자료를 얻고자 1983년 12월에서 1984년 8월 사이에 5회에 걸쳐 총 25개 시료를 취하여 내용물에 대한 변화범위와 평균치를 나타내면 다음과 같다. pH $5.80{\sim}7.25$,6.60, 수온 ; $6.0{\sim}23.0^{\circ}C,\;12.9^{\circ}C$, 총증발잔류물 $33.0{\sim}325mg/l$, 121.2mg/l ; 알카리도 $4.75{\sim}51.6mg/l$, 24.lmg/l ; 경도 $9.47{\sim}85.0mg/l$, 30.3mg/l, 전기전도도 $0.495{\sim}2.750{\times}^2{\mu}{\mho}/cm,\;1.239{\times}10^2{\mu}{\mho}/cm$ ; 탁도$0.54{\sim}7.80$ NTU, 2.04 NTU ; 과망간산칼륨 소비량 $0.51{\sim}8.47mg/l$, 1.96mg/l ; 염화이온 농도 $4.91{\sim}36.0mg/l$, 12.53mg/l ; 불소이온 ND-0.30ppm, 0.08ppm ; 질산성 질소 ND-8.94mg/l, 1.94mg/l ; 아질산성 질소 ND-0.10mg/l, 0.03mg/l ; 암모니아성 질소 ND-0.16mg/l, 0.03mg/l ; 인산성 인 ND-0.09mg/l, 0.03mg/l ; 규산성 규소 $0.42{\sim}22.7mg/l$, 7.96mg/l ; 구리 ND-10.5ppb, 2.46ppb ; 납 ND-22.7ppb, 3.54ppb ; 아연 ND-103ppb, 21.33ppb ; 철분 $20.3{\sim}2,800ppb$, 801.72ppb 였었다. 비소, 시안, 카드뮴, 마그네슘, 수은, 육가크롬, 페놀 등은 검출되지 않았다. 특히, 지점 1은 총증발잔류물 178.1mg/l, 전기전도도 $2.127{\times}10^2{\mu}{\mho}/cm$, 탁도 3.16NTU, 염화이온 16.32mg/l로서 다른 지점들 보다 월등히 높았다. 영양염류중 규산성 규소의 함량은 강우에 크게 영향을 받았다. 또 불소이온농도는 상수도 수질기준치 1ppm 보다 0.08ppm으로 훨씬 낮았으며, 철분의 농도는 801.72ppb로서 2.7배나 초과하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권4호
• /
• pp.36-39
• /
• 2022

Since the MgB₂ superconductor is simply composed of two constituents of Mg and B, its performance can be monitored easily with the change of one ingredient compared to the other. With the powder size of B less than 100 nm, two different sizes of Mg powders are used to investigate the reaction temperature dependence of MgB₂ bulk samples. In the range of 630-700℃ for the duration of 30 min., the un-reacted Mg is seen only at 630℃ with Mg powder size of <5 ㎛, whereas Mg traces are detected at all the temperature range with Mg powder size of <45 ㎛. The reaction temperature dependence of MgB₂ superconducting transition temperature, T_c, shows little difference whether Mg powder size is large or small in this range except for the 630℃. It is worthy of notice that the critical current densities of MgB₂ show higher performance with the small size of Mg compared to the large one at all field ranges. With the Mg powder size of <45 ㎛, flux pinning is enhanced with decreasing the reaction temperature, whereas flux pinning properties is quite similar in the Mg powder size of <5 ㎛ except for the 630℃, where Mg is left behind after the reaction.

• Journal of Ceramic Processing Research
• /
• 제20권6호
• /
• pp.609-616
• /
• 2019

The optimum powder to ball ratio was examined, which is one of the important conditions in reactive mechanical grinding processing. Yttria (Y2O3)-stabilized zirconia (ZrO2) (YSZ), Ni, and graphene were chosen as additives to enhance the hydriding and dehydriding rates of Mg. Samples with a composition of 92.5 wt% Mg + 2.5 wt% YSZ + 2.5 wt% Ni + 2.5 wt% graphene (designated as Mg-2.5YSZ-2.5Ni-2.5graphene) were prepared by grinding in hydrogen atmosphere. Mg-2.5YSZ-2.5Ni-2.5graphene had a high effective hydrogen-storage capacity of almost 7 wt% (6.85 wt%) at 623 K in 12 bar H2 at the second cycle (n = 2). Mg-2.5YSZ-2.5Ni-2.5graphene contained Mg2Ni phase after hydriding-dehydriding cycling. Mg-2.5YSZ-2.5Ni-2.5graphene had a larger quantity of hydrogen absorbed for 60 min, Ha (60 min), than Mg-2.5Ni-2.5graphene and Mg-2.5graphene. The addition of YSZ also increased the initial dehydriding rate and the quantity of hydrogen released for 60 min, Hd (60 min), compared with those of Mg-2.5Ni-2.5graphene. Y2O3-stabilized ZrO2, Ni, and graphene-added Mg had a higher initial hydriding rate and a larger Ha (60 min) than Fe2O3, MnO, or Ni and Fe2O3-added Mg at n = 1.

• Korean Chemical Engineering Research
• /
• 제50권6호
• /
• pp.939-944
• /
• 2012

본 연구에서는 $MgCl_2-CaCl_2$-NaCl 혼합용융염에서 $Mg^{2+}$ 이온의 전기화학적 거동을 평가하였다. $MgCl_2-CaCl_2$-NaCl 용융염에서 순환전압전류법 측정을 통해 $Mg^{2+}$이온의 환원전위를 측정하였고, $MgCl_2$의 농도 변화 및 용융염의 온도변화에 따른 환원전위의 영향에 대해 살펴보았다. 그리고 각각 660, 680, 700, 720 및 $740^{\circ}C$의 온도에서 $Mg^{2+}$ 이온의 확산계수를 계산한 결과 $8.79{\times}10^{-6}$, $9.56{\times}10^{-6}$, $1.17{\times}10^{-5}$, $1.4{\times}10^{-5}$ 및 $1.77{\times}10^{-5}\;cm^2\;s^{-1}$로 측정되었다. 또한 Arrhenius 식을 통해 $Mg^{2+}$ 이온의 확산에 대한 활성화 에너지는 $70.28\;kJ\;mol^{-1}$로 계산되었다.

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.832-838
• /
• 1996

Thermite reaction products of MgO and Al were added to MgO-C refractory to improve the properties of corrosion against the attack of slag, oxidation and mechanical spalling. Corrosion rate of MgO-C-MgAl2O4 spinel refractory at the ratio of 3.3(CaO/SiO2) slag was smaller than that of MgO-C and MgO-C-Al refractory. The excellent corrosion resistance of the MgO-C-MgAl2O4 spinel refractory against the slag attack was appeared by Al and MgAl2O4 spinel with high melting point and corrosion resistance and the high thermal conductivity and low thermal expansion of AIN. Hot M.O.R at 140$0^{\circ}C$ and the resistance of oxidation weight loss at 90$0^{\circ}C$ were 210kg/cm2 and -12% respectively.