• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.5
• /
• pp.323-334
• /
• 2021

Pilot-scale coagulation and sedimentation processes were operated to investigate the T-P (Total phosphorus) removal efficiency. A multiple regression model was also derived to predict the water quality improvement effect with river water characteristics. The inflow rates for the pilot-scale facility were 157-576 m³/day, and the coagulant doses were in the range of 13.7-58.5 mg/L (average 38.9 mg/L) for PAC (Poly alum chloride) and 16.5-62.1 mg/L (average 36.0 mg/L) for alum. The results found that the influent BOD (Biochemical oxygen demand) and T-P concentrations were 4.9 mg/L and 0.115 mg/L, and the removal efficiencies were 52.7% and 59.4%, respectively. T-P removal efficiencies on wet weather days were higher by 10% than dry weather days because influent solids influenced T-P's coagulation process. The pH of river water was 6.9-7.8, and the average pH was 7.3. Although the pH variation was not significant, the trend showed that the treatment efficiency of T-P and PO₄-P removal increased. Thus, the pH range considered in this study seems to be appropriate for the coagulation process, which is essential for phosphorous removal. The T-P removal efficiencies were 19.6-93.3% (average 59.2%) for PAC and 16.4-98.5%(average 55.9%) for alum; thus, both coagulants showed similar results. Furthermore, the average coagulant doses were similar at 42.4 mg/L for PAC and 41.3 mg/L for alum. When the T-P concentration of the effluent was compared by the [Al]/[P] ratio, the phosphorus concentration of the treated water decreased with an increasing [Al]/[P] ratio, and the lowest T-P concentration range appeared at the [Al]/[P] ratio of 10-30. A seasonal multiple regression analysis equations were derived from the relationships between 10 independent and dependent variables (T-P concentration of effluent). This study could help lake water quality maintenance, reduce eutrophication, and improve direction settings for urban planning, especially plans related to developing waterfront cities.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.2
• /
• pp.17-26
• /
• 2001

The Purpose of this study is to provide an effective way of developing GIS to UIS at the local level. For this purpose, the study typologically reviews the developing processes of UIS and utilizes a case study as research method. As the case, the study selects three types of UIS such as FM based UIS(Kwacheon), Urban Planning based UIS(Cheungju), and LIS based UIS(Taegu Nam-Gu). Based on these three UISs, the study concludes as follows. First, the developing process of GIS to UIS began with isolated approach through integrated model and finally to internet UIS. Second, UISs follows similar processes to that of GIS construction. Third, local governments focus on the development of FM based UIS of which construction budget is financed by the central government. Based on these findings, the study provides policy alternatives for the successful construction of UIS.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.1
• /
• pp.38-49
• /
• 1988

This paper presented as follows results of laboratory model tests with various shaped footings on soil bed reinforced with the strips on the base of behaviour of soil structure according to the loads and triaxial test results reinforced with geotextiles. Their parameters studied were the effects on the bearing capacity of a footing of the first layer of reinforcement, horizontal and vertical spacing of layers, number of layers, tensile strength of reinforcement and iclination load to the vertical 1.Depending on the strip arrangement, ultimate bearing capacity values could be more improved than urreinforced soil and the failure of soil was that the soil structure was transfered from the macrospace to microspase and its arrangement, from edge to edge to face to face. 2.The reinforcement was produced the reinforcing effects due to controlling the value of factor of one and permeable reinforcement was never a barrier of drainage condition. 3.Strength ratio was decreased as a linear shape according to increment of saturation degree of soil used even though at the lower strength ratio, the value of M-factor was rot influenced on the strength ratio but impermeable reinforcement decreased the strength of bearing capacity. 4.Ultimate bearing capacity under the plane-strain condition was appeared a little larger than triaxial or the other theoretical formulars and the circular footing more effective. 5.The maximum reinforcing effects were obtained at U I B=o.5, B / B=3 and N=3, when over that limit only acting as a anchor, and same strength of fabric appeared larger reinforcing effects compared to the thinner one. 6.As the LDR increased, more and more BCR occurred and there was appeared a block action below Z / B=O.5, but over the value, decrement of BCR was shown linear relation, and no effects above one. 7.The coefficient of the inclination was shown of minimum at the three layers of fabrics, but the value of H / B related to the ultimate load was decreased as increment of inclination degree, even though over the value of 4.5 there wasn't expected to the reinforcing effects As a consequence of the effects on load inclination, the degree of inclination of 15 per cent was decreased the bearing capacity of 70 per cent but irnproved the effects of 45 per cent through the insertion of geotextile.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.1
• /
• pp.25-30
• /
• 2010

Titanium and titanium alloys are widely used for orthopedic and dental implants for their superior mechanical properties, low modulus, excellent corrosion resistance and good biocompatibility. In this study, corrosion behaviors of nanotube formed on the bone plate of Ti-6Al-4V alloy for dental use have been investigated. $TiO_2$ nanotubes were formed on the dental bone plates by anodization in $H_3PO_4$ containing 0.6 wt % NaF solution at $25^{\circ}C$. Electrochemical experiments were performed using a conventional three-electrode configuration with a platinum counter electrode and a saturated calomel reference electrode. Anodization was carried out using a scanning potentiostat (EG&G Co, Model 263A USA), and all experiments were conducted at room temperature. The surface morphology was observed using field emission scanning electron microscopy (FE-SEM) and energy dispersive x-ray spectroscopy(EDS). The corrosion behavior of the dental bone plates was examined using potentiodynamic test(potential range of -1500~2000 mV) in a 0.9% NaCl solution by potentiostat (EG&G Co, PARSTAT 2273. USA). The inner diameter of nanotube was about 150~180 nm with wall thickness of about 20 nm. The interspace of nanotube to nanotube was 50 nm. The passive region of the nanotube formed bone plates showed the broad range compared to non-nanotube formed bone plates. The corrosion surface of sample was covered with corrosion products.

• Journal of Preventive Medicine and Public Health
• /
• v.55 no.6
• /
• pp.578-585
• /
• 2022

Objectives: This study aimed to adapt the survey questionnaire designed by Moens et al. (2021) and determine the validity and reliability of the Arabic version of the survey in a sample of the Saudi population experiencing teleworking. Methods: The questionnaire includes 2 sections. The first consists of 13 items measuring the impact of extended telework during the coronavirus disease 2019 (COVID-19) crisis. The second section includes 6 items measuring the impact of the COVID-19 crisis on selfview of telework and digital meetings. The survey instrument was translated based on the guidelines for the cultural adaptation of self-administrated measures. Results: The reliability of the questionnaire responses was measured by Cronbach's alpha. The construct validity was checked through exploratory factor analysis followed by confirmatory factor analysis (CFA) to further assess the factor structure. CFA revealed that the model had excellent fit (root mean square error of approximation, 0.00; comparative fit index, 1.0; Tucker-Lewis index, 1; standardized root mean squared residual, 0.0). Conclusions: The Arabic version of the teleworking questionnaire had high reliability and good validity in assessing experiences and perceptions toward teleworking. While the validated survey examined perceptions and experiences during COVID-19, its use can be extended to capture experiences and perceptions during different crises.

• Atmosphere
• /
• v.23 no.2
• /
• pp.205-220
• /
• 2013

Upper ocean response to typhoon Ewiniar (0603) and its impact on the following typhoon Bilis (0604) are investigated using observational data and numerical experiments. Data used in this study are obtained from the Ieodo Ocean Research Station (IORS), ARGO, and satellite. Numerical simulations are conducted using 3-dimensional Princeton Ocean Model. Results show that when Ewiniar passes over the western North Pacific, unique oceanic responses are found at two places, One is in East China Sea near Taiwan and another is in the vicinity of IORS. The latter are characterized by a strong sea surface cooling (SSC), $6^{\circ}C$ and $11^{\circ}C$ in simulation and observation, under the condition of typhoon with a fast translation speed (8m $s^{-1}$) and lowering intensity (970 hPa). The record-breaking strong SSC is caused by the Yellow Sea Bottom Cold Water, which produces a strong vertical temperature gradient within a shallow depth of Yellow Sea. The former are also characterized by a strong SSC, $7.5^{\circ}C$ in simulation, with a additional cooling of $4.5^{\circ}C$ after a storm's passage mainly due to enhanced and maintained upwelling process by the resonance coupling of storm translation speed and the gravest mode internal wave phase speed. The numerical simulation reveals that the Ewiniar produced a unfavorable upper-ocean thermal condition, which eventually inhibited the intensification of the following typhoon Bilis. Statistics show that 9% of the typhoons in western North Pacific are influenced by cold wakes produced by a proceeding typhoon. These overall results demonstrate that upper ocean response to a typhoon even after the passage is also important factor to be considered for an accurate intensity prediction of a following typhoon with similar track.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.6
• /
• pp.423-429
• /
• 2009

Liposomes have been used as one of the efficient carriers for drug delivery. In this study, anionic liposomes of which surface was modified by using both electrostaic interaction between anionic liposomes and cationically charged BSA molecules at lower pH than isoelectric point (pI) of BSA and denaturation of the BSA-coated liposomes by thermal treatment. The thermally denatured BSA-coated liposomes (DBAL) had mean particle diameter of 125.2${\pm}$1.7 nm and zeta potential value of -22.4${\pm}$4.5 mV. Loading efficiency of model drug, doxorubicin (DOX), into liposomes was 83.0${\pm}$2.6%. Results of in vitro stability study of DBAL in blood plasma showed that the mean particle diameter of DBAL 400 did not increase in blood plasma and adsorption of plasma protein was much less than plain or anionic liposomes. Intracellular uptake of DBAL 400 evaluated by confocal microscopy observation was higher than that of PEG liposomes.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.2
• /
• pp.20-23
• /
• 2013

For sensitive measurements of micro-Tesla nuclear magnetic resonance (${\mu}T$-NMR) signal, a low-noise superconducting quantum interference device (SQUID) system is needed. We have fabricated a liquid He dewar for an SQUID having a large diameter for the pickup coil. The initial test of the SQUID system showed much higher low-frequency magnetic noise caused by the thermal magnetic noise of the aluminum plates used for the vapor-cooled thermal shield material. The frequency dependence of the noise spectrum showed that the noise increases with the decrease of frequency. This behavior could be explained from a two-layer model; one generating the thermal noise and the other one shielding the thermal noise by eddy-current shielding. And the eddy-current shielding effect is strongly dependent on the frequency through the skin-depth. To minimize the loop size for the fluctuating thermal noise current, we changed the thermal shield material into insulated thin Cu mesh. The magnetic noise of the SQUID system became flat down to 0.1 Hz with a white noise of 0.3 $fT/{\surd}Hz$, including the other noise contributions such as SQUID electronics and magnetically shielded room, etc, which is acceptable for low-noise ${\mu}T$-NMR experiments.

• Animal Bioscience
• /
• v.36 no.1
• /
• pp.75-83
• /
• 2023

Objective: The objective of this study was to describe a methodological procedure to quantify the heat production (HP) partitioning in basal metabolism or fasting heat production (FHP), heat production due to physical activity (HPA), and the thermic effect of feeding (TEF) in roosters. Methods: Eighteen 54-wk-old Hy Line Brown roosters (2.916±0.15 kg) were allocated in an open-circuit chamber of respirometry for O₂ consumption (VO₂), CO₂ production (VCO₂), and physical activity (PA) measurements, under environmental comfort conditions, following the protocol: adaptation (3 d), ad libitum feeding (1 d), and fasting conditions (1 d). The Brouwer equation was used to calculate the HP from VO₂ and VCO₂. The plateau-FHP (parameter L) was estimated through the broken line model: HP = U×(R-t)×I+L; I = 1 if t<R or I = 0 if t>R; Where the broken-point (R) was assigned as the time (t) that defined the difference between a short and long fasting period, I is conditional, and U is the decreasing rate after the feed was withdrawn. The HP components description was characterized by three events: ad libitum feeding and short and long fasting periods. Linear regression was adjusted between physical activity (PA) and HP to determine the HPA and to estimate the standardized FHP (st-FHP) as the intercept of PA = 0. Results: The time when plateau-FHP was reached at 11.7 h after withdrawal feed, with a mean value of 386 kJ/kg^0.75/d, differing in 32 kJ from st-FHP (354 kJ/kg^0.75/d). The slope of HP per unit of PA was 4.52 kJ/mV. The total HP in roosters partitioned into the st-FHP, termal effect of feeding (TEF), and HPA was 56.6%, 25.7%, and 17.7%, respectively. Conclusion: The FHP represents the largest fraction of energy expenditure in roosters, followed by the TEF. Furthermore, the PA increased the variation of HP measurements.

• Asia Marketing Journal
• /
• v.14 no.2
• /
• pp.39-63
• /
• 2012

Previous studies of reward programs have generally focused on designing the best programs for consumers and suggested that consumers' perception of the value of reward programs can vary according to the type of reward program (e.g., hedonic vs. utilitarian and direct vs. indirect) and its timing (e.g., immediate vs. delayed). These studies have typically assumed that consumers' preference for reward programs has a positive effect on brand loyalty. However, Dowling and Uncles (1997) pointed out that this preference does not necessarily foster brand loyalty. In this regard, the present study verifies this assumption by examining the effects of consumers' perception of the value of reward programs on their brand loyalty. Although reward programs are widely used by online shopping malls, most studies have examined the conditions under which consumers are most likely to value loyalty programs in the context of offline shopping. In the context of online shopping, however, consumers' preferences may have little effect on their brand loyalty because they have more opportunities for comparing diverse reward programs offered by many online shopping malls. That is, in online shopping, finding attractive reward programs may require little effort on the part of consumers, who are likely to switch to other online shopping malls. Accordingly, this study empirically examines whether consumers' perception of the value of reward programs influences their brand loyalty in the context of online shopping. Meanwhile, consumers seek utilitarian and/or hedonic value from their online shopping activity(Jones et al., 2006; Barbin et al., 1994). They visit online shopping malls to buy something necessary (utilitarian value) and/or enjoy the process of shopping itself (hedonic value). In this sense, reward programs may reinforce utilitarian as well as hedonic value, and their effect may vary according to the type of reward (utilitarian vs. hedonic). According to Chaudhuri and Holbrook (2001), consumers' perception of the value of a brand can influence their brand loyalty through brand trust and affect. Utilitarian value influences brand loyalty through brand trust, whereas hedonic value influences it through brand affect. This indicates that the effect of this perception on brand trust or affect may be moderated by the type of reward program. Specifically, this perception may have a greater effect on brand trust for utilitarian reward programs than for hedonic ones, whereas the opposite may be true for brand affect. Given the above discussion, the present study is conducted with three objectives in order to provide practical implications for online shopping malls to strategically use reward program for establishing profitable relationship with customers. First, the present study examines whether reward programs can be an effective marketing tool for increasing brand loyalty in the context of online shopping. Second, it investigates the paths through which consumers' perception of the value of reward programs influences their brand loyalty. Third, it analyzes the effects of this perception on brand trust and affect by considering the type of reward program as a moderator. This study suggests and empirically analyzes a new research model for examining how consumers' perception of the value of reward programs influences their brand loyalty in the context of online shopping. The model postulates the following 10 hypotheses about the structural relationships between five constructs: (H1) Consumers' perception of the value of reward programs has a positive effect on their program loyalty; (H2) Program loyalty has a positive effect on brand loyalty; (H3) Consumers' perception of the value of reward programs has a positive effect on their brand trust; (H4) Consumers' perception of the value of reward programs has a positive effect on their brand affect; (H5) Brand trust has a positive effect on program loyalty; (H6) Brand affect has a positive effect on program loyalty; (H7) Brand trust has a positive effect on brand loyalty; (H8) Brand affect has a positive effect on brand loyalty; (H9) Consumers' perception of the value of reward programs is more likely to influence their brand trust for utilitarian reward programs than for hedonic ones; and (H10) Consumers' perception of the value of reward programs is more likely to influence their brand affect for hedonic reward programs than for utilitarian ones. To test the hypotheses, we considered a sample of 220 undergraduate students in Korea (male:113). We randomly assigned these participants to one of two groups based on the type of reward program (utilitarian: transportation card, hedonic: movie ticket). We instructed the participants to imagine that they were offered these reward programs while visiting an online shopping mall. We then asked them to answer some questions about their perception of the value of the reward programs, program loyalty, brand loyalty, brand trust, and brand affect, in that order. We also asked some questions about their demographic backgrounds and then debriefed them. We employed the structural equation modeling (SEM) method with AMOS 18.0. The results provide support for some hypotheses (H1, H3, H4, H7, H8, and H9) while providing no support for others (H2, H5, H6, H10) (see Figure 1). Noteworthy is that the path proposed by previous studies, "value perception → program loyalty → brand loyalty," was not significant in the context of online shopping, whereas this study's proposed path, "value perception → brand trust/brand affect → brand loyalty," was significant. In addition, the results indicate that the type of reward program moderated the relationship between consumers' value perception and brand trust but not the relationship between their value perception and brand affect. These results have some important implications. First, this study is one of the first to examine how consumers' perception of the value of reward programs influences their brand loyalty in the context of online shopping. In particular, the results indicate that the proposed path, "value perception → brand trust/brand affect → brand loyalty," can better explain the effects of reward programs on brand loyalty than existing paths. Furthermore, these results suggest that online shopping malls should place greater emphasis on the type of reward program when devising reward programs. To foster brand loyalty, they should reinforce the type of shopping value that consumers emphasize by providing them with appropriate reward programs. If consumers prefer utilitarian value to hedonic value, then online shopping malls should offer utilitarian reward programs and vice versa.