• Journal of Food Hygiene and Safety
• /
• v.28 no.4
• /
• pp.312-318
• /
• 2013

This study validated microbiological hazards of ginseng farms at the cultivation stage and suggested recommendations to develop a good agricultural practices (GAP) model. A total of 96 samples were collected from cultivation environments (soil, irrigation water, and atmosphere), plants (ginseng and its leaf), personnel hygiene (glove, cloth, and hand) of 3 ginseng farms (A, B, and C) and were tested to analyze sanitary indicator bacteria (aerobic plate count, coliforms and Escherichia coli), major foodborne pathogens (E. coli O157:H7, Listeria monocytogenes, Salmonella spp., Staphylococcus aureus, and Bacillus cereus), and fungi. Total bacteria, coliform, and fungi in the 3 ginseng farms were detected at the level of 1.3~6.0, 0.1~5.0, and 0.4~4.9 v/g (or mL, hand, and $100cm^2$), respectively. Only irrigation water collected from one ginseng farm was confirmed to be E. coli positive. In case of pathogenic bacteria, B. cereus was detected at levels of 0.1~5.0 log CFU/g (or mL, hand, and $100cm^2$) in all samples, but other pathogen bacterias were not detected in any samples from all farms. Although E. coli were detected in irrigation water, the level of microbial for the three farms was lower than the regulation limit. According to the results, the ginsengs produced from the 3 farms were comparatively safe with respect to microbiological hazard. However, cross-contamination of bacteria from environments and workers to ginseng has been considered as potential risks. Therefore, to minimize microbial contamination in ginseng, GAP model should be applied for ensuring the safety of ginsengs.

• Journal of Bio-Environment Control
• /
• v.18 no.1
• /
• pp.29-39
• /
• 2009

The influence of windbreak to minimize the ventilation velocity near the plant canopy of a greenhouse strawberry was thoroughly investigated using computational fluid dynamics (CFD) technology. Windbreaks were constructed surrounding the plant canopy to control ventilation and maintain the concentration of the supplied $CO_2$ from the soil surface close to the strawberry plants. The influence of no windbreak, 0.15 m and 0.30 m height windbreaks with varied air velocity of 0.5, 1.0 and 1.5 m/s were simulated in the study. The concentrations of supplied $CO_2$ within the plant canopy of were measured. To simplify the model, plants were not included in the final model. Considering 1.0m/s wind velocity which is the normal wind velocity of greenhouses, the concentrations of $CO_2$ were approximately 420, 580 and 653 ppm ($1{\times}10^{-9}kg/m^3$) for no windbreak, 0.15 and 0.30 m windbreak height, respectively. Considering that the maximum concentration of $CO_2$ for the strawberry plants was around 600-800 ppm, the 0.30 m windbreak height is highly recommended. This study revealed that the windbreak was very effective in preserving $CO_2$ gas within the plant canopy. More so, the study also proved that the CFD technique can be used to determine the concentration of $CO_2$ within the plant canopy for the plants consumption at any designed condition. For an in-depth application of this study, the plants as well as the different conditions for $CO_2$ utilization, etc. should be considered.

• Archives of Pharmacal Research
• /
• v.28 no.5
• /
• pp.509-517
• /
• 2005

A series of structurally diverse amide derivatives of [6-(3,5-dimethyl-4- chloro-pyrazole-1-yl)-3(2H)-pyridazinone-2-yl]acetic acid were prepared and tested for their in vivo analgesic and anti-inflammatory activity by using p-benzoquinone-induced writhing test and carrageenan induced hind paw edema model, respectively. The analgesic and anti-inflammatory activity of the compounds, 7c, 7d and 7k were found to be equipotent to aspirin (as an analygesic) and indometacin (as an anti-inflammatory drug), respectively. The other amide derivatives generally resulted in lower activity on comparision with reference compounds.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.199-204
• /
• 2001

This paper showed the study on the heat transfer into space by the aspect ratio of solar concentration absorber, and the purpose of this study is to obtain the optimum aspect ratio and tilt angle. The boundary conditions of a numerical model were assumed as follows : (1) The heat source is located at the center of absorber. (2) The bottom was is opened and adiabatic. (3) The top, right and left walls are cooled wall. The parameters for the study are the tilt angles and the aspect ratio. The velocity vectors and isotherms were dense at wall side and the heat source. The mean Nusselt number had a maximum value at Ar=1:1 and $\theta=0^{\circ}$ and showed a low value as the tilt angles were increased.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_2
• /
• pp.55-63
• /
• 2001

This work employs two models to quantify the size-segregated dry deposition fluxes of particle-bound N $O_3$$^{[-10]}$ , N $H_4$$^{+}$, and S $O_4$$^{2-}$ along the coastal area of Jeju Island based on the chemical composition data of aerosol collected during the springtime of 1995. The two approaches produced fairly comparable results, despite the feature differences between the two models. The modelling results obtained indicated that the mean dry deposition velocity was around 0.4 cm $s^{-1}$ for N $O_3$$^{[-10]}$ , 0.2 cm $s^{-1}$ for N $H_4$$^{+}$, and 0.3 cm $s^{-1}$ for S $O_4$$^{2-}$, and the dry deposition flux varied between 371~1368 $\mu\textrm{g}$ $m^{-2}$ da $y^{-1}$ for nitrate, 28~625 $\mu\textrm{g}$ $m^{-2}$ da $y^{-1}$ for ammonium, and 957~6088 $\mu\textrm{g}$ $m^{-2}$ da $y^{-1}$ for sulfate. Although difficulties in collecting giant and/or fine particles limited the understanding of the mass size distribution of particles and thus the ability to refine estimates of the dry deposition flux for the particulate matter, both models were still able to offer sufficient realism to explain the features of the available data collected from the coastal area of Jeju Island.and.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1285-1285
• /
• 2001

For NIR measurements of papers normally diffuse reflectance accessories are used which can provide a large sampling area. The in-line process control FT-NIR spectrometer MATRIX-E enables the contactless measurement of paper samples of low silicone coat weights on label-stocks in a paper converting factory. For this study concentrations of silicone between 0 and 2 g/$m^2$ on various paper substrates were included in a quantitative method. The aim was to achieve an absolute value for the deviation from the target value of 1 g/$m^2$ during continuous movement of the paper with velocities around 400 numinute. Influences from the uncoated paper type due to supplier, color, opacity, area densities, pre-coating as well as different compounds of the agent silicone were investigated and it was found that all these papers can be represented in one PLS-model. Especially the fact that silicone as an element is present in clay coated papers is of no consequence to the measurements with MATRIX-E. Moreover during in-line installations the variation of the moisture contents in the moving paper due to variable machine velocities as well as the reflecting material of the cylinder have to be considered. It is shown that the result of the in-line calibration has the same prediction ability compared to lab scale results(Root Mean Square Error of Cross-Validation RMSECV = 0.034 g/$m^2$).

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.523-531
• /
• 2022

In order to study the sensitivity and the uncertainty of the Moroccan research reactor TRIGA Mark II, a model of this reactor has been developed in our ERSN laboratory for use with the N-Particle MCNP Monte Carlo transport codes (version 6). In this article, the sensitivities of the effective multiplication factor of this reactor are evaluated using the ENDF/B-VII.0, ENDF/B-VII.1 and JENDL-4.0 libraries and in 44 energy groups, for the cross sections of the fuel (U-235 and U-238) and the moderator (H-1 and O-16). However, the quantification of the uncertainty of the nuclear data is performed using the nuclear code NJOY99 for the generation and processing of covariance matrices. On the one hand, the highest uncertainty deviations, calculated using the ENDFB-VII.1 and JENDL4.0 evaluations, are 2275, 386 and 330 pcm respectively for the reactions U₂₃₅(n, f), $ U_{235}(n\bar{\nu})$ and H₁(n, γ). On the other hand, these differences are very small for the neutron reactions of O-16 and U-238. Regarding the neutron spectra, in CT-mid plane, they are very close for the three evaluations (ENDF/B-VII.0, ENDF/B-VII.1 and JENDL-4.0). These spectra present two peaks (thermal and fission) around the energies 0.05 eV and 1 MeV.

• Atmosphere
• /
• v.27 no.1
• /
• pp.67-77
• /
• 2017

In this study, we analyzed the characteristics of flow around the Daeyeon automatic weather station (AWS 942) and established formulas estimating inflow wind speeds at a computational fluid dynamics (CFD) model domain for the area around Pukyong national university using a computational fluid dynamics (CFD) model. Simulated wind directions at the AWS 942 were quite similar to those of inflows, but, simulated wind speeds at the AWS 942 decreased compared to inflow wind speeds except for the northerly case. The decrease in simulated wind speed at the AWS 942 resulted from the buildings around the AWS 942. In most cases, the AWS 942 was included within the wake region behind the buildings. Wind speeds at the inflow boundaries of the CFD model domain were estimated by comparing simulated wind speeds at the AWS 942 and inflow boundaries and systematically increasing inflow wind speeds from $1m\;s^{-1}$ to $17m\;s^{-1}$ with an increment of $2m\;s^{-1}$ at the reference height for 16 inflow directions. For each inflow direction, calculated wind speeds at the AWS 942 were fitted as the third order functions of the inflow wind speed by using the Marquardt-Levenberg least square method. Estimated inflow wind speeds by the established formulas were compared to wind speeds observed at 12 coastal AWSs near the AWS 942. The results showed that the estimated wind speeds fell within the inter quartile range of wind speeds observed at 12 coastal AWSs during the nighttime and were in close proximity to the upper whiskers during the daytime (12~15 h).

• Journal of fish pathology
• /
• v.28 no.1
• /
• pp.43-51
• /
• 2015

The pharmacokinetic properties and residue levels of amoxicillin (AMOX) were studied after intramuscular injection to cultured olive flounders ($100{\pm}50g$), Paralichthys olivaceus. For pharmacokinetic studies, AMOX of 20 to 80 mg/kg body weight was administered at $17{\pm}2^{\circ}C$ or $22{\pm}2^{\circ}C$ and AMOX concentrations were determined in plasma, the liver, and the kidney by HPLC-UVD. Plasma samples were assessed at 0.25, 0.5, 1, 3, 6, 12, 24, 48, 72, 96, 168 hours post-dose, whereas liver and kidney concentrations were measured at 0.25 to 48 hours post-dose. The kinetic profiles of AMOX were analyzed by fitting to a 2-compartmental model with PKSolver program. The following parameters were obtained for a single dosage of 20, 40 and 80 mg/kg of body weight at $22^{\circ}C$ and 20 and 40 mg/kg of body weight at $17^{\circ}C$ in plasma, liver and kidney, respectively: $C_{max}$ (the peak concentration)= $27.23-257.36{\mu}g/m{\ell}$, $5.49-41.65{\mu}g/g$, $16.75-129.31{\mu}g/g$; $t_{max}$ (the time for peak concentration)= 0.05-0.91, 1.36-3.28, 1.95-4.49 h. For residue studies, AMOX of 40 and 400mg/kg was administered, and muscle samples were taken at 2, 5, 7, 14 and 21 days post-dose. The residueof AMOX in the muscle were found under the MRLs (maximum residue levels) within 7 days for the two doses.

• Journal of the Korean Chemical Society
• /
• v.38 no.4
• /
• pp.265-270
• /
• 1994

The aquation and base hydrolysis of [Co(en)$_2$NH$_3$Cl]$^{2+}$ were studied by UV spectroscopic method in various SDS aqueous solution. The base hydrolysis of [Co(en)$_2$NH$_3$Cl]$^{2+}$ with the addition of 0, 0.05, 0.1 mol dm$^{-3}$ sodium chloride was studied. For the aquation of the complex, the rate constant in the micellar phase(kH$^M$) was a little larger than that in the aqueous phase(kH$^W$). With the increase of SDS concentration, the second order rate constant(kOH) for the base hydrolysis unchanged below the CMC and sharply decreased down to a limiting value after the CMC was reached. The effect of added NaCl on the rate behavior of the complexes in the micellar solution were investigated by using an ion-exchanged model.