• 한국전기전자재료학회논문지
• /
• 제19권5호
• /
• pp.417-421
• /
• 2006

In this study, in order to develop low temperature sintering piezoelectric ceramics for LTCC (Low-Temperature Cofired Ceramic) multilayer piezoelectric actuator, PMW-PMN-PZT ceramics using $0.2wt%\; Li_2CO_3$ and $0.25wt%\;CaCO_3$ as sintering aids were investigated according to the varation of PMW substution. Composition ceramics could be sintered at $900^{\circ}C$ by adding sintering aids. As the amount of PMW substitution increased, the crystal structure of PMW-PMN-PZT ceramics moved from tetragonal phase to rhombohedral phase gradually, and MPB(Morphotrophic Phase Boundary) region appeared at 2 mol% PMW substitution. At the sintering temperature of $900^{\circ}C$, the density, electromechanical coupling factor(kp), mechanical quality factor(Qm), dielectric constant(${\epsilon}r$), piezoelectric constant(d33) and Curie temperature(Tc) of 2 mol% PMW substituted PMW-PMN-PZT ceramics showed the optimal values of $7.88g/cm^3$, 0.58, 1002, 1264, 352 pC/N and $336^{\circ}C$, respectively, for LTCC multilayer piezoelectric actuator application.

• Journal of the Optical Society of Korea
• /
• 제11권3호
• /
• pp.130-132
• /
• 2007

The characteristics of $S\breve{o}lc$ filters in $X^{(2)}$ nonlinear photonic crystals, periodically poled lithium niobate ($LiNbO_3$), were investigated by the Jones matrix method. The transmittance increases and the full width half maximum of the filter becomes narrow as the duty ratio increases. However, the filtering wavelength does not change. The transmittance at the filtering wavelength is over 95% when the duty ratio is larger than 0.35.

• 한국광학회지
• /
• 제9권3호
• /
• pp.199-204
• /
• 1998

홀로그램 기록에 있어서 기록저장밀도를 높이기 위해 각다중, 회전다중, 그리고 공간다중, 그리고 공간다중을 동시에 실현할 수 있는 매우 간단한 방식을 제안하고 실험하였다. 각다중과 회전다중은 두 개의 쐐기 프리즘을 이용하여 기준빔을 직접 제어함으로써 얻고, 공간다중은 기록매질을 기록평면에서 이동시킴으로써 얻었다. 기준빔과 물체빔의 사이각도가 예각인 예각기록 구조와 이것이 90$^{\circ}$인 90$^{\circ}$기록구조가 모두 구현될수 있다. 실험에서는 광풀리머를 사용한 예각기록구조로 180개의 홀로그램을 다중기록하였고, 철함유 LiNbO3 광굴절결정을 사용한 90$^{\circ}$기록구조로 147개의 홀로그램을 다중기록하였다. 우리의 방식은 3가지 다중화를 위한 복잡한 기계적 움직임의 제어를 단순함으로써 실질적 홀로그래피 메모리 시스템의 실현을 쉽게 한다.

• 한국광학회지
• /
• 제14권6호
• /
• pp.663-668
• /
• 2003

본 논문에서는 디스크형 기록매질에 이용될 수 있는 국소 홀로그램 기록방식을 연구하였다. 이 방식에서는 원통렌즈를 사용하여 기준빔을 얇은 두께로 집속하고, 그 집속된 곳에 신호빔을 쬐어 홀로그램을 기록한다. 기록매질을 기준빔의 스팟 크기보다 더 많이 이동시킴으로써 여러 개의 국소 홀로그램을 다중화한다. 국소 홀로그램 기록방식은 균일한 회절효율을 위하여 기록시간을 조절할 필요가 없다. 우리는 주어진 신호빔의 스팟 크기에 대해서 요구되는 최저의 기록매질 두께가 존재함을 보였다. Fe가 도핑된 2 mm 두께의 LiNbO$_3$광결정을 사용하여 데이터의 저장 및 복원 실험을 실행하였고, 20 bit/$\mu\textrm{m}$$^2$의 면적 저장밀도와 2.5${\times}$$10^{-3}$의 RBER(raw-bit error rate)을 얻었다.

• 전자공학회논문지D
• /
• 제36D권12호
• /
• pp.43-52
• /
• 1999

Fe가 0.015Wt.% 도핑된 $LiNbO_3$ 결정을 이용한 광굴절 필터에서 중심파장을 튜닝하기 위한 새로운 방식을 제안하고, 기하학적 방법을 이용한 필터 통과대역 특성 해석을 통해 새로운 개념의 파장 선택성 이론을 제시하였다. 본 구조에서 중심파장의 튜닝은 실시간적인 수신빔 입사각 제어를 통해 얻을 수 있고, 실시간 광학 소자인 공간광학 변조기를 통해 이루어진다. 따라서, 튜닝 동작을 수행하는데 소요되는 시간은 공간광학 변조기의 응답시간에 의해 결정되며, 결과적으로 고속 튜닝이 가능해진다. 제시된 구조에 적용되는 광 필터는 열에 의해 고정된 격자를 사용하므로 선택되는 모든 파장에 대해 안정적인 회절 특성을 얻을 수 있다. 가변 필터의 설계는 4nm의 통과대역과 10nm 간격을 닺는 세채널에서 튜닝되도록 구성되었으며, 실험결과 4.5nm, 4.25nm, 4nm의 통과대역과 1530.5nm, 1540.5nm, 1549.5nm의 중심파장을 갖는 필터 특성을 얻었다.

• 한국결정성장학회지
• /
• 제10권4호
• /
• pp.309-317
• /
• 2000

Langasite is a promising new piezoelectric material for SAW filter application. Little was known until recently about the methods needed to mechanically polish and chemically polish/etch this material. In this experiment, polishing, slurry chemistry and chemical wet etching for langasite is described. Conventional quartz and LN ($LiNbO_3$) polishing methods did not produce satisfactory polished surfaces, and polishing with a colloidal silica slurries has shown to be most effective. The optimum condition was investigated by changing the slurry chemistry. As the planarization effect is very important in SAW filter applications, the examination of the effective particle number effect and the particle size effect was carried out. Z-cut langasite surface which had been polished with the colloidal silica slurries was etched in a variety of etchants. Conventional quartz etchants destroyed the polished surface. Other etchants formed a thin film on the surfaces. In this experiment, the reaction between langasite and a few etching solution was analysed. And an appropriate selective etchant solution for analyzing the defects was synthesized.

• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.200-204
• /
• 2008

Coherent tunable terahertz generation was demonstrated in periodically poled stoichiometric lithium tantalate crystal via difference frequency generation of femtosecond laser pulses. Simultaneous forward and backward terahertz radiations were obtained around 1.35 and 0.63 THz, respectively at low temperature. By cooling the crystal to reduce losses caused by phonon absorptions, the generated THz bandwidth was as narrow as 23GHz at the center frequency of 0.63 THz. The measurement result of temperature-dependent showed gradual intensity increase of the generated terahertz pulse and red shift of the center frequency as the temperature decrease from 291 to 143 K, but insignificant reduction of the spectral bandwidth. Furthermore, the stoichiometric crystal was very suitable for the suppression of THz loss at low temperature compared to the congruent $LiNbO_3$ crystal.

• 한국전기전자재료학회논문지
• /
• 제29권2호
• /
• pp.90-94
• /
• 2016

In this work, [$Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_x(Zr_{0.5}Ti_{0.5})_{0.97-x}O_3-BiFeO_3$] (x=0.02 to 0.12) composition ceramics were fabricated by the conventional soild state reaction method and their microstructure and piezoelectric properties were investigated according to PNN substitution. The addition of small amount of $BiFeO_3$, $Li_2CO_3$, and $CaCO_3$ were used in order to decrease the sintering temperature of the ceramics. The XRD (x-ray diffraction patterns) of all ceramics exhibited a perovskite structure. The sinterability of PMW-PNN-PZT-BF ceramics was remarkably improved using liquid phase sintering of $CaCO_3$, $Li_2CO_3$. However, it was identified from of the X-ray diffraction patterns that the secondary phase formed in grain boundaries decreased the piezoelectric properties. According to the substitution of PNN, the crystal structure of ceramics is transformed gradually from a tetragonal to rhombohedral phase. The x=0.10 mol PNN-substituted PMW-PNN-PZT-BF ceramics sintered at $920^{\circ}C$ showed the optimum values of piezoelectric constant($d_{33}$), piezoelectric figure of merit($d_{33{\cdot}}g_{33}$), planar piezoelectric coupling coefficient($k_p$) and density : $d_{33}=566$ [pC/N], $g_{33}=29.28[10^{-3}mV/N]$, $d_{33{\cdot}}g_{33}=16.57[pm^2/N]$, $k_p=0.61$, density=7.82 [$g/cm^3$], suitable for duplex ultrasonic sensor application.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권4호
• /
• pp.443-450
• /
• 1995

A directional coupler which on the X-cut $LiNbO_3$ substrate is fabricated by using proton exchange method and self-aligned method. After proton exchange process, the waveguide is formed by annealing process. The relation ship between refractive index change of waveguide and maximum output was studied along with the annealing time. A self-aligned method was used to simplify the fabrication process of the waveguide and to maximize the efficiency of electric field. The on-off state of modulator has been observered with the switching of the directional coupler by the electric field effect and also the switching voltage of the directional coupler has been measured with 8.0 [V].

• 한국전기전자재료학회논문지
• /
• 제14권5호
• /
• pp.410-416
• /
• 2001

KLN thin films were fabricated on Pt coated Si(100) wafer using an rf-magnetron sputtering method. The grown KLN thin film consists of 4-fold grains. In this experiment, the structure of 4-fold grained thin film was investigated using XRD and SEM measurements. Pt layer was also deposited using the rf-magnetron sputtering method,. XRD measurement showed that he Pt thin film has Gaussian distribution form with strong (111) direction orientation. The KLN thin film has preferred-orientation of (001) direction, and the peak consists of 2 separate peaks; one with broad FWHM and the other with narrow FWHM. The sharp peak is due to single crystal, and combining with Em results, the 4-fold grain consists of singel crystals with c-axis normal to substrate.