• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3609-3614
• /
• 2013

Orthorhombic and hexagonal lanthanum(III) hydroxycarbonate ($LaCO_3OH$) and $Ln^{3+}$-doped $LaCO_3OH$ ($LaCO_3OH:Ln^{3+}$, where Ln = Ce, Eu, Tb, and Ho) powders were prepared by a hydrothermal reaction under ambient pressure and characterized by thermogravimetry, powder X-ray diffraction, infrared and luminescence spectroscopy, and field-emission scanning electron microscopy. The polymorph of $LaCO_3OH$ depended on the reaction temperature, inorganic salt additive, species of $Ln^{3+}$ dopant, and solvent. The calcination of orthorhombic $LaCO_3OH:Ln^{3+}$ (2 mol %) powers at $600^{\circ}C$ yielded a mixture of hexagonal and monoclinic $La_2O_2CO_3:Ln^{3+}$ powders. The relative quantity of the latter increased with decreasing ionic radius of the $Ln^{3+}$ dopant ion and increasing doping concentrations. On the other hand, the calcination of hexagonal $LaCO_3OH:Ln^{3+}$ (2 mol %) powders at $600^{\circ}C$ resulted in a pure hexagonal $La_2O_2CO_3:Ln^{3+}$ powder, regardless of the species of $Ln^{3+}$ ions (Ln = Ce, Eu, and Tb). The luminescence spectra of $LaCO_3OH:Ln^{3+}$ and $La_2O_2CO_3:Ln^{3+}$ were measured to examine the effect of their polymorph on the spectra.

• 한국세라믹학회지
• /
• 제39권1호
• /
• pp.68-73
• /
• 2002

$La_2O_3-Al_2O_3$(LAO)와 $La_2O_3-Al(OH)_3$(LAH)의 물질을 메카노케미칼 방법으로 분쇄하여 $LaAlO_3$세라믹스의 합성과 유전특성에 대하여 비교.조사하였다. $LaAlO_3$단일상을 얻기 위한 열처리온도는 LAO분말에서 $1300^{\circ}C$, LAH 분말은 $1000^{\circ}C$였다. 하소분말 중에 미 반응한 $La_2O_3$가 존재하면, 공기 중의 습기로 인하여 $La_2O_3$에서 $La(OH)_3$로 변하고,소결체의 밀도는 나빠진다. $1500^{\circ}C$에서 4시간 소결한 LAO 시료는 이론밀도의 97.3%이고, $1400^{\circ}C$에서 4시간 소결한 LAH시료는 98.3%였다. LAO시료는 입자의 크기가 불 균일하고 평균 입경은 4-5${mu}m$이며, LAH시료는 입자가 균일하고 크기가 $0.75{\mu}m$ 정도로 아주 작았다. 비유전율은 LAO와 LAH시료가 비슷하였고, 그 값은 약 22를 나타내었다. 그러나 LAH시료(0.0003)의 유전손실은 LAO시료 (0.001)보다 작았는데 이는 입자의 크기에 기인된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.701-704
• /
• 2001

The dielectric and sintering properties of LaAlO$_3$ceramics synthesised with La$_2$O$_3$-Al$_2$O$_3$(LAO) and La$_2$O$_3$-Al(OH)$_3$(LAH) were investigated. In case of LAH samples, a single phase of LaAlO$_3$powders was formed at 100$0^{\circ}C$, density of the ceramics sintered at 140$0^{\circ}C$ was 6.41g/㎤, and the dielectric constant and loss were 22.4 and 0.003, respectively. In case of LAO samples, a single phase of LaAlO$_3$powders was formed at 130$0^{\circ}C$, density of the ceramics sintered at 150$0^{\circ}C$ was 6.35g/㎤, and the dielectric constant and loss were 22.16 and 0.009, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.171.2-171.2
• /
• 2015

Nowadays, trivalent rare-earth ($RE^{3+}$) ions activated metal oxides have been proved to be excellent host materials due to their various applications. Facile wet-chemical technique have been considered as the best synthetic route due its intensive interest in the preparation of nanostructures. Europium ion doped lanthanum hydroxide ($La(OH)_3:Eu^{3+}$) phosphors were synthesized by the facile wet chemical method using the hexamethylenetetramine (HMTA) as a mediated surfactant. The thermal behavior for the $La(OH)_3:Eu^{3+}$ phosphors was investigated by thermogravimetric and differential thermal analysis method. The morphological studies were measured by scanning electron microscope and transmission electron microscope measurements, indicating three-dimensional (3D) flower-like $La(OH)_3:Eu^{3+}$ nanorod bundles. After subsequent annealing process, the lanthanum oxide ($La_2O_3:Eu^{3+}$) phosphor exhibited similar kind of morphology. The synthesized $La(OH)_3:Eu^{3+}$ and $La_2O_3:Eu^{3+}$ samples were characterized by X-ray powder diffraction and Fourier transform infrared spectroscopy. Furthermore, photoluminescence and cathodoluminescence properties were studied in details.

• 방사성폐기물학회지
• /
• 제19권3호
• /
• pp.353-366
• /
• 2021

The solubilities of different multicomponent lanthanide oxide (Ln₂O₃) solid solutions including binary (Ln₁ and Ln₂ = La, Nd, Eu, or Tm), ternary (Ln₁, Ln₂, and Ln₃ = La, Nd, Eu, or Tm), and higher systems (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) were studied after aging for four weeks at 60℃. Our recent study revealed that the phase transformations in binary ((La, Nd) and (La, Eu)) and ternary (La, Nd, Eu) systems are responsible for the formation of (La, Nd)(OH)₃, (La, Eu)(OH)₃, and (La, Nd, Eu)(OH)₃ solid solutions, respectively. The variations in the mole fractions of La³⁺, Nd³⁺, and Eu³⁺ in the sample solutions of these hydroxide solid solutions indicated that a thermodynamic equilibrium might account for the apparent La, Nd, and Eu solubilities. Conversely, the binary and ternary systems containing Tm₂O₃ as the heavy lanthanide oxide retained the oxide-based solid solutions, and their solubility behaviors were dominated by their congruent dissolutions. In the higher multicomponent system, the X-ray diffraction patterns of the solid phases, before and after contact with the aqueous phase indicated the formation of a stable oxide solid solution and their solubility behavior was explained by its congruent dissolution.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1114-1115
• /
• 2006

The preparation of single-phase $CuLaO_2$ with delafossite-type structure by means of the solid-state reaction method was investigated using X-ray diffraction. The results showed that notwhistanding the fact that there was a trace of metallic copper, nearly single-phase $CuLaO_2$ was obtained by using $La(OH)_3$ as a lanthanum source and by firing the mixed powder with nonstoichiometric composition ratio of $La(OH)_3:Cu_2O=1:1.425$ in a vacuum at 1273 K for 10 h. The measurement of electrical conductivity and Seebeck coefficient showed that $CuLaO_2$ thus obtained was a p-type semiconductor and had a Seebeck coefficient of approximately $70{\mu}V/K$.

• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.238-243
• /
• 2002

The dielectric properties and synthesis of $LaAIO_3$ ceramics from mixtures of $La_2O_3$ and $AI(OH)_3$ via ground(planetary ball mill) and unground(wet ball mill) were investigated. The single phase $LaAIO_3$ of ground powder was formed at $1000^{\circ}C$, while that of unground powder was formed at $1300^{\circ}C$. Density and grains of ground sample showed 98% of theory density and a uniform size of 0.75\mu\textrm{m}$, respectively, However those of unground sample showed 93% and non-uniform sizes of 4-5 $\mu\textrm{m}$. Dielectric constant and temperature coefficient of capacitance ($\tau$c) of both ground and unground samples were 21~22 and +70~74 ppm$/^{\circ}C$, respectively. Dielectric loss of ground sample(0.0004) was 10 times as low as that of unground sample(0.003) due to a uniform and small gram size.

• 공업화학
• /
• 제17권5호
• /
• pp.483-489
• /
• 2006

희토류 화합물인 $La_{2}O_{3}$ 및 $CeO_{2}$ 시약과 이들을 함유하는 희토류 광석을 이용하여 제철 폐수 중의 불소 및 유해 중금속 제거에 대하여 연구하였다. 용액 중 불소에 대한 희토류 원소의 제거 반응기구는 $La^{3+}$ 및 $Ce^{4+}$ 등의 양이온이 불소 이온과 불용성 화합물을 형성하는 것으로 알려져 있다. 기존의 불소 제거에 사용되고 있는 소석회와 비교한 결과 $La_{2}O_{3}$ 및 $CeO_{2}$ 의 불소제거 효율이 높았다. HF 용액에서의 제거 효율은 $CeO_{2}$ 광석 < $CeO_{2}$ 시약 < $Ca(OH)_{2}$ < $La_{2}O_{3}$ 광석 < $La_{2}O_{3}$ 시약의 순서였고, 제철 폐수에서는 $Ca(OH)_{2}$ < $CeO_{2}$ 광석 < $CeO_{2}$ 시약 < $La_{2}O_{3}$ 광석 < $La_{2}O_{3}$ 시약의 순서였다(pH의 영향은 소석회인 경우 pH가 증가할수록 불소제거율이 감소하였다. 세륨화합물과 란탄화합물인 경우는 pH 증가에도 불구하고 불소제거 효율이 증가하는 경향을 보였으나 방류 시 수질조건과 불소제거율을 함께 고려할 때 용액의 적정 pH는 7이 적당하다고 판단된다). 망간제거의 경우, pH 7 이하에서는 소석회가 희토류 화합물보다 우수한 망간제거율을 보였고 pH 10에서는 모든 처리제에 대해서 거의 완벽한 제거특성을 보였다. 총크롬 제거의 경우는 산성 조건에서는 란탄화합물이 가장 높은 불소 제거율을 보였으며 pH 7이상에서는 모든 처리제가 좋은 효율을 보였다.

• 한국세라믹학회지
• /
• 제21권3호
• /
• pp.231-238
• /
• 1984

Heavy metal fluoride glasses exhibit considerable promise as high transparency materials from the UV to the IR. These glasses are prepared by fusion of the mixture of metal fulorides($ZrF_4$, $BaF_2$, $LaF_3$ etc) at 800-1, 00$0^{\circ}C$ under the inert$(N_2)$ or reactive ($CCl_4$, $Cl_2$) atmosphere following the casting into glass on cooling. Infrared absorption at the 3, 400 cm-1 -OH peak has been measured as a function of thickness for several ZrF-$BaF_2$-LaF and $HfF_4$-$BaF_2$-$LaF_3$ glasses to separate contributions from bulk and surface -OH. For glasses melted under $CCl_4$ reactive atmosphere the peak is due almost entirely to surface-OH. and melting in a closed reactor was best for removing -OH. In ambient atmosphere the -OH peak exhibited no time dependence over a 30 d period indicating a very small rate of surface attack by atmospheric H2O. Removal of -OH absorption processing was generally easier and more complete for the $BaF_2$/ThF4-glasses than for the $ZrF_4$-or $HfF_4$-based glasses.

• 대한화학회지
• /
• 제38권9호
• /
• pp.667-675
• /
• 1994

$La(OH)_3$를 공침제로 사용하여 해수중 흔적량 세 가지 원소를 동시에 부선시켜 정량하는 방법에 관하여 연구하였다. 인공해수를 사용하여 효과적인 부선을 위한 용액의 pH, 공침제의 양, 계면활성제의 종류와 양 등의 실험조건을 최적화시켰다. 부선하기 전에 Cr(VI)를 $NaBH_4$에 의하여 Cr(III)으로 환원시켜 크롬이 공침되도록 하였다. 해수시료 1.0 l에 $La^{3+}$를 가하고 용액의 pH를 9.8로 조절하여 $La(OH)_3$로 침전시키면서 흔적량 Co(III), Cu(II) 및 Cr(Ⅲ)이 공침되게 하였다. 부피 1:8의 0.5% sodium oleate와 sodium dodecylsulfate 에탄올 용액을 가하고 질소기체로 bubbling하여 침전들을 띄웠다. 뜬 침전을 분리해 내어 걸르고 씻은 다음 7.0 M $HNO_3$ 용액으로 녹여서 탈염수로 묽혀 25.0 ml가 되게 하였다. 분석원소들을 흑연료 원자흡수 분광광도법으로 정량하는데 인공해수로 표준용액을 만들어 검정곡선을 작성하였다. 이 방법을 동해와 서해의 물시료중 이들 원소분석에 응용하여 좋은 결과를 얻었다. 그리고 해수시료에 이들 원소를 일정량 첨가하여 얻은 회수율은 90.0% 이상으로 본 방법이 정량적임을 확인하였다.