• Journal of Electrochemical Science and Technology
• /
• v.11 no.4
• /
• pp.352-360
• /
• 2020

Lithium cobalt oxide (LiCoO₂, LCO) has been widely used as a cathode material for Li-ion batteries (LIBs) owing to its excellent electrochemical performance and highly reproducible synthesis even with mass production. To improve the energy density of the LIBs for their deployment in electro-mobility, the full capacity and voltage of the cathode materials need to exploited, especially by operating them at a higher voltage. Herein, we doped LCO with divalent calcium-ion (Ca²⁺) to stabilize its layered structure during the batteries' operation. The Ca-doped LCO was synthesized by two different routes, namely solid-state and co-precipitation methods, which led to different average particle sizes and levels of dopant's homogeneity. Of these two, the solid-state synthesis resulted in smaller particles with a better homogeneity of the dopant, which led to better electrochemical performance, specifically when operated at a high voltage of 4.5 V. Electrochemical simulations based on a single particle model provided theoretical corroboration for the positive effects of the reduced particle size on the higher rate capability.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.555-560
• /
• 2008

Extraction was performed to prepare ash-free coal from low rank coal under the temperature of $200-430^{\circ}C$ and initial pressure of 0.1MPa. Three kinds of coal samples with different rank were used and N-methyl-2-pyrrolidinone(NMP, polar), 1-methyl naphthalene(I-MN, non-polar), Light Cycle Oil(LCO, non-polar) were used as solvents. Results showed that higher extraction yield could be obtained with NMP than with 1-MN and LCO, but the ash concentration shows minimun in the case of 1-MN. Three operation modes were compared, that is, idle, agitation and ultrasonic extraction mode. From the results, it was found that the extraction yield and ash concentration were 70.09% and 1.03% under the agitation mode, 80.7% and 0.76% under the ultrasonic operation mode respectively in the case of NMP used at the temperature of $350^{\circ}C$. Similar results were obtained with 1-MN. Effect of ultrasonic on the extraction was estimated as 15-20% increase in the yields and 26% reduction in the ash concentration.

• Journal of Life Science
• /
• v.18 no.7
• /
• pp.1015-1018
• /
• 2008

To analyze the population genetic structure of the oyster Crassostrea gigas Thunberg, 34 specimens werecollected from Gamak bay in March, 2007. Total genomic DNA was extracted from each sample and PCR was performed to identify haplotypes of oyster by using HCO2918 and LCO1491 primers. Four kinds of haplotypes (CR1, CR2, CR3, and CR4) were identified. Among these group, CR3 showed the highest relative frequency at 73% than any other of haplotypes. On the basis of hierarchical genetic structure, the population of Gamak showed a higher genetic relationship with Namhae, but the genetic distance between southern and western coasts was negative and no statistical significance was found (p>0.05). Consequently, the oyster from Korea coast is determined to be both homogenous and large.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.4
• /
• pp.489-499
• /
• 1999

Background: The patient with bronchiectasis may have obstructive ventilatory impairment combined with mild restrictive ventilatory impairment due to fibrosis of surrounding lung parenchyme and pleural adhesions caused by chronic recurrent pulmonary infections. Since hyperinflation or emphysematous change can be occured in bronchiectasis, pulmonary functions such as lung volumes and diffusing capacity may also vary with associated emphysema. Methods: For the evaluation of lung volumes and diffusing capacity in bronchiectasis with respect to the anatomic types and severity of bronchiectasis, a total of 40 cases comprising 24 cases of tubular, and 16 cystic type of bronchiectasis were analyzed retrospectively. Correlation between lung functions and extent of bronchiectasis or associated emphysema detected in HRCT were also evaluated. Results: Vital capacity(VC) tended to decrease in cystic type than in tubular type. As the severity of bronchiectasis became serious, the VC were significantly reduced, whereas the total lung capacity(TLC), residual volume(RV) and its ratio to the total lung capacity(RV/TLC) had no significant difference. Lung clearance index(LCI) was significantly increased in cystic type than in tubular type, whereas the slope of phase III in single breath nitrogen curve($\triangle$N2/L) was not significantly changed regard to the type and severity of bronchiectasis. DLCO and DLCO/VA reflecting diffusing capacity were significantly decreased in cystic type and also as the severity of bronchiectasis became serious. The correlation coefficient of VC, DLCO and LCI with the extent of bronchiectasis were -0.322, -0.339 and 0.487, respectively, whereas other parameters were not significantly correlated with the extent of bronchiectasis. VC and DLCO correlated negatively with the extent of emphysema while RV, RV/TLC, LCI and $\triangle$N2/L correlated positively. Conclusion: These findings suggest that the reduction of VC and diffusing capacity or uneven distribution of inspired gas in bronchiectasis are related to both the extent of bronchiectasis and associated emphysema while increased residual volume be related to the extent of associated emphysema alone.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.218-221
• /
• 2002

We have successfully developed the high performance flexible thin film diode device for flexible plastic film LCD. For flexible LCD, TFD device must be normally operated under any deformation state. Two type devices, Ti/Ta$_2$O$\sub$5//Ta and Al/Ta$_2$O$\sub$5//Al were fabricated and the symmetry and reliability of those were estimated under various measurement conditions including severely bending states.

• Information and Communications Magazine
• /
• v.31 no.2
• /
• pp.21-28
• /
• 2014

본고에서 디지털 홀로그래피를 위한 SLM중 대표적인 몇 가지 기술에 대한 동향을 살펴보았다. 먼저 SLM픽셀 피치에 따른 홀로그램 영상의 특성에 대해 논의하고, 픽셀화된 SLM으로써 현재 상용화 되고 있는 DMD SLM 과 LCoS SLM의 특성에 대해 살펴 보았다. 픽셀화 되지 않은 SLM 인 음향 광학 변조기와 OASLM 에 대해서도 살펴 보았다. 양질의 디지털 홀로그래피를 구현하기 위하여 궁극적으로 필요한 픽셀 피치 1 ${\mu}m$ 이하 SLM 의 개발 현황과 복소 변조 SLM 에 대해서도 알아보았다.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.685-688
• /
• 2008

• Tuberculosis and Respiratory Diseases
• /
• v.64 no.2
• /
• pp.80-86
• /
• 2008

Background: Park et al. developed the Korean reference equation for the measurement of diffusing capacity in 1985. However, the equation has not been widely used in Korea and foreign reference equations have been popularly used. We intended to compare the clinical usefulness and the accuracy of the the Korean reference equation (Park's equation) with that of the foreign equation (Burrows' equation) that is commonly used in Korea. Methods: 1. Evaluation of clinical usefulness; Among 1,584 patients who underwent diffusing capacity ($D_LCO$) at the Asan Medical Center from July to December 2006, group A subjects included 276 patients who had different interpretations of $D_LCO$ in trials employing Burrows' equation and Park's equation. Clinical assessment was decided by consensus of two respiratory physicians. In order to evaluate the clinical usefulness of Burrows' equation and Park's equation, agreement of clinical assessment and $D_LCO$ interpretation were measured. 2. Evaluation of accuracy; Group B subjects were 81 patients with interstitial lung disease (ILD) and 39 normal subjects. The 81 ILD patients were diagnosed following a surgical lung biopsy. The accuracy of diagnosing ILD as well as sensitivity and specificity were evaluated according to the use of the reference equations (Burrows' equation and Park's equation) for $D_LCO$. Results: Agreement between clinical assessment and interpretation of $D_LCO$ was 22% for the use of Burrows' equation and 78% for the use of Park's equation. The sensitivity and specificity of the Burrows' equation for diagnosing ILD were 64.2% and 100%. The sensitivity and specificity of the Park's equation for diagnosing ILD were 90.1% and 100%. The sensitivity of the Park's equation for diagnosing ILD was significantly higher than that of Burrows' equation (p<0.001). Conclusion: The Korean reference equation (Park's equation) was more clinically useful and had higher sensitivity for diagnosing ILD than the foreign reference equation (Burrows' equation).

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.869-876
• /
• 1996

Purification of 2,6-dimethylnaphthalene(2,6-DMNA) from the distillate containing a mixture of dimethylnaphthalene(DMNA) isomers of very high concentration was investigated by crystallization-recrystallization combination as a after-treatment for separation and purification of 2,6-DMNA in the light cycle oil(LCO). The separation of individual isomers of DMNA was studied by crystallization with the distillate as a feed. 2,6-DMNA, 2,7-dimethylnaphthalene(2,7-DMNA) and 2,3-dimethylnaphthalene(2,3-DMNA) were concentrated to crystal, and it was fould that separation between a group of 2,6-, 2,7-, 2,3-DMNA isomers and a group of the other DMNA isomers was possible. However, it was not possible to separate 2,6-, 2,7- and 2,3-DMNA from one another. To select the most suitable recrystallization solvent for purification of 2,6-DMNA, several conventional solvents, which have been employed commercially as recrystallization solvents for high purity performance, were tested, through measurement of solubility of 2,6- and 2,7-DMNA. The solvent used were hexane, iso-propyl ether, ethyl acetate and ethanol. From the solubility results for 2,6- and 2,7-DMNA, ethanol seemed to be the most suitable solvent for purification of 2,6-DMNA. Finally, with crystal recovered by crystallization as a feed and ethanol as a solvent, recrystallization experiments were conducted under various conditions. Purification of 2,6-DMNA was easily done with increasing operating temperature and solvent to feed ratio. These results show that the crystallization-recrystallization combination is an effective one for separation of individual isomers of DMNA.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.105-110
• /
• 2008

The high-purity purification of 2,6-dimethylnaphthalene (2,6-DMN, 10.43 wt%) from the concentrate of DMN isomers recovered from light cycle oil (LCO) through distillation-extraction combination was examined by a crystallization operation. To select the most suitable crystallization solvent for purification of 2,6-DMN, several conventional solvents, which have been employed commercially as crystallization solvents for high-purity performance, were tested, through measurement of purity and yield of 2,6-DMN. The solvents used were acetone, cyclohexanone, ethanol, ethyl ether, ethyl acetate, isopropyl ether, methanol, n-hexane, n-heptane, pyridine, THF, toluene, and a mixture of methanol and acetone. The mixture of 60 vol% methanol and 40 vol% acetone (M/A = 1.5) was found to be suitable for purification of 2,6-DMN in the concentrate of DMN isomers based on purity and yield. Increasing the operation temperature and the volume ratio of solvent (M/A = 1.5) to feed (concentrate of DMN) resulted in improving the purity of 2,6-DMN, whereas the yield decreased. The crystal recovered by crystallization run using the concentrate of DMN isomers contained about 76 wt% 2,6-DMN. Furthermore, for recovery of high-purity 2,6-DMN, crystal containing 76 wt% 2,6-DMN was crystallized. As a result, crystal with 99.7 wt% 2,6-DMN was recovered with 40% yield.