• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.566-571
• /
• 2008

Frictional sounds of 8 vapor permeable water repellent fabrics by sound generator were recorded and analyzed through FFT fast Fourier transform analysis. The frictional Sounds were quantified by calculating level pressure of total sound(LPT), the level range(${\Delta}L$) and the frequency difference(${\Delta}f$). Mechanical properties were measured by KES-FB. LPT values of specimens finished wet coating were higher than those of other kinds of finishing. ${\Delta}L$ values of specimens laminated were highest. Absolute values of ${\Delta}f$ were high in the cire finished and laminated specimens. Values for bending rigidity, shear stiffness and energy required for the compression of coated specimens increased compared with the cire finished and laminated specimens. Laminated specimens had high values of frictional coefficient and low values of surface roughness. Relationship between frictional sounds and mechanical properties analysed by use of correlation coefficients and stepwise regression. LPT showed significant correlation with elongation, tensile energy, geometrical roughness, weight and thickness. ${\Delta}L$ was highly correlated with tensile linearity, frictional coefficient, and ${\Delta}f$ with tensile linearity, weight and thickness. LPT were revealed to be explained by elongation and weight. ${\Delta}L$were predicted by tensile linearity, and ${\Delta}f$ by tensile linearity and thickness.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.1 no.3
• /
• pp.244-251
• /
• 1989

A numerical study has been performed on the natural convection heat transfer from a conducting tube with two axial fins to a surrounding cylinder. As increasing dimensionless fin length ($L_F$), the center of flow moves to the bottom of annulus and the recirculating flow rate is decreased. The maximum local Nusselt number of conducting tube appears at ${\theta}=180^{\circ}$ for $L_F=0.0$, but at ${\theta}=130^{\circ}$ for $L_F{\geq}0.3$ and that of outer cylinder appears at ${\theta}=13^{\circ}$ for $L_F{\leq}0.6$ but at ${\theta}=33^{\circ}$ for $L_F=1.0$. The fin temperature is decreased by increasing radial distance and the temperature distribution of the downward fin is generally less than that of the upward fin. By increasing fin length, the local Nusselt number of the upward fin appears negative values for $L_F=1.0$, but appears positive values for $L_F<0.8$, and that of the downward fin appears positive values.

• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.474-481
• /
• 2007

With population growth, industrialization, and urbanization within the watershed, the hydrologic response changed dramatically, resulting in increases in peak flow with lesser time to peak and total runoff with shortened time of concentration. Infiltration is directly affected by initial soil moisture condition, which is a key element to determine runoff. Influence of the initial soil moisture condition on hydrograph analysis should be evaluated to assess land use change impacts on runoff and non-point source pollution characteristics. The Long-Term Hydrologic Impact Assessment (L-THIA) model has been widely used for the estimation of the direct runoff worldwide. The L-THIA model was applied to the Little Eagle Creek (LEC) watershed and Its estimated direct runoff values were compared with the BFLOW filtered direct runoff values by other researchers. The $R^2$ value Was 0.68 and the Nash-Sutcliffe coefficient value was 0.64. Also, the L-THIA estimates were compared with those separated using optimized $BFI_{max}$ value for the Eckhardt filter. The $R^2$ value and the Nash-Sutcliffe coefficient value were 0.66 and 0.63, respectively. Although these higher statistics could indicate that the L-THIA model is good in estimating the direct runoff reasonably well, the Antecedent Moisture Condition (AMC) was not adjusted in that study, which might be responsible for mismatches in peak flow between the L-THIA estimated and the measured peak values. In this study, the L-THIA model was run with AMC adjustment for direct runoff estimation. The $R^2$ value was 0.80 and the Nash-Sutcliffe coefficient value was 0.78 for the comparison of L-THIA simulated direct runoff with the filtered direct runoff. However there was 42.44% differences in the L-THIA estimated direct runoff and filtered direct runoff. This can be explained in that about 80% of the simulation period is classified as 'AMC I' condition, which caused lower CN values and lower direct runoff estimation. Thus, the coefficients of the equation to adjust CN II to CN I and CN III depending on AMC condition were modified to minimize adjustments impacts on runoff estimation. The $R^2$ and the Nash-Sutcliffe coefficient values increase, 0.80 and 0.80 respectively. The difference in the estimated and filtered direct runoff decreased from 42.44% to 7.99%. The results obtained in this study indicate the AMC needs to be considered for accurate direct runoff estimation using the L-THIA model. Also, more researches are needed for realistic adjustment of the AMC in the L-THIA model.

• The Journal of Korean Academy of Prosthodontics
• /
• v.26 no.1
• /
• pp.185-196
• /
• 1988

The purpose of this investigation was to analyze the color of natural teeth by means of the OFC-1001 DP colorimeter which could measure in Adams Coordinate System (L,a,b system). The subjects were the 164 persons (82 men and 82 women) ranged from the teen to the sixtieth who had come to infirmary of dental college, Chosun University. The colors of incisal third, middle third and cervical third of maxillary right incisor, maxillary right canine and maxillary right second premolar were examined after the teeth were cleaned, polished and dried. The data were analyzed statistically by means of SPSS (Statistical Package For the Social Science). The results were as follows. 1. The means of L(lightness), a (red chromaticity), b (yellow chromaticity) of all teeth were measured (Table 2,3,4). 2. The color of teeth was yellowish-gray or bluish-gray. 3. The L value and b value of the cervical third was greater than those of the incisal and middle third. 4. The L value of maxillary 2nd premolar was greater than those of maxillary incisor md maxillay canine. 5. The a & b values of maxillary canine were greater than those of maxillary incisor and maxillary 2nd premolar. 6. The average values of L,a,b of teeth between male and female were not significant. 7. The L values of teeth were decreasing and the b values of teeth were increasing as the age was increased, but there was no corelation between the a values and aging.

• Journal of Wetlands Research
• /
• v.16 no.2
• /
• pp.269-274
• /
• 2014

The purpose of this study is to compare CT (disinfectant concentration * time) values in removing the antibiotic resistance bacteria, antibiotic resistance gene and transfer of antibiotic resistance genes. Different concentration of chlorine(C) and contact time(T) according to the removal of antibiotic resistance was calculated for each. As a result, for the 90% removal of antibiotic resistant bacteria, around 176~353 mg min/L CT values are needed. For the removal of the antibiotic resistance gene, 195~372 mg min/L CT values are required. For the 90% reduction of antibiotic resistance gene transfer by chlorine disinfection, 187~489 mg min/L CT values are needed. Based on our results, higher CT value was required for removing antibiotic resistant genes rather than antibiotic resistance bacteria.

• The Journal of Korean Medicine
• /
• v.24 no.2
• /
• pp.32-39
• /
• 2003

Objectives : In Oriental Medicine, hyperlipidemia is considered as phlegm retention (痰飮) and blood stasis (瘀血). Typhae pollen helps remove blood stasis and hemorrhage, and it also has an effect of relieving pain caused by blood stasis. The purpose of this study is to investigate the preventive effects of Typhae pollen on diet-induced hyperlipidemia in rats. Methods : Thirty-two male Sprague-Dawley rats were divided into normal, control and treated groups. The control and treated groups were fed with a 1.5% cholesterol diet over 4 weeks, and extract of Typhae pollen was administered to the treated group during the same period. Blood samples were collected from each animal at 0 and 4 weeks and used for the blood chemical analysis. Animals were sacrificed at 4 weeks and chemical analysis was performed on the collected liver samples. Results : The serum total cholesterol ($122.45{\pm}4.96mg/dL$), LDL-cholesterol ($54.27{\pm}4.95mg/dL$), and triglyceride ($122.00{\pm}7.33mg/dL$) values of the treated group were significantly lower compared with the serum total cholesterol ($147.91{\pm}7.22mg/dL$), LDL-cholesterol ($81.91{\pm}8.34mg/dL$), and triglyceride ($169.27{\pm}12.34mg/dL$) values of the control group. The liver total cholesterol (TEX>$230.18<{\pm}18.81mg/dL$) values of the treated group were significantly higher compared with the liver total cholesterol ($178.54{\pm}$10.11mg/dL) values of the control group. Conclusions : On the basis of these results, it is confirmed that Typhae pollen has preventive effects on diet-induced hyperlipidemia in rats.

• Journal of Korean Dental Science
• /
• v.8 no.2
• /
• pp.49-56
• /
• 2015

Purpose: The effect of accelerated aging on color stability of various dual-cured self-adhesive resin cements were evaluated in this study. Materials and Methods: Color stability was examined using three different brands of dual-cured self-adhesive resin cements: G-CEM LinkAce (GC America), MaxCem Elite (Kerr), and PermaCem 2.0 (DMG) with the equivalent color shade. Each resin cement was filled with Teflon mold which has 6 mm diameter and 2 mm thickness. Each specimen was light cured for 20 seconds using light emitting diode (LED) light curing unit. In order to evaluate the effect of accelerated aging on color stability, color parameters (Commission Internationale de l'Eclairage, CIE $L^*$, $a^*$, $b^*$) and color differences (${\Delta}E^*$) were measured at three times: immediately, after 24 hours, and after thermocycling. The $L^*$, $a^*$, $b^*$ values were analyzed using Friedman test and ${\Delta}E^*$ values on the effect of 24 hours and accelerated aging were analyzed using t-test. These values were compared with the limit value of color difference (${\Delta}E^*=3.7$) for dental restoration. One-way ANOVA and Scheff's test (P<0.05) were performed to analyze each ${\Delta}E^*$ values between cements at each test period. Result: There was statistically significant difference in comparison of color specification ($L^*$, $a^*$, $b^*$) values after accelerated aging except $L^*$ value of G-CEM LinkAce (P<0.05). After 24 hours, color difference (${\Delta}E^*$) values were ranged from 2.47 to 3.48 and $L^*$ values decreased and $b^*$ values increased in all types of cement and MaxCem Elite had high color stability (P<0.05). After thermocycling, color change's tendency of cement was varied and color difference (${\Delta}E^*$) values were ranged from 0.82 to 2.87 and G-CEM LinkAce had high color stability (P<0.05). Conclusion: Color stability of dual-cured self-adhesive resin cements after accelerated aging was evaluated and statistically significant color changes occurred within clinically acceptable range.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.4
• /
• pp.641-646
• /
• 1994

changes in HMF content, capsanthin content, Hunter tirstimulus values, color-preference, and pruchasing intent were investigated during storage of industry-produced kochujang packed with polyethylene and nylon complex film at 13, 27 and 37$^{\circ}C$. HMF content, which was very low at initial , did not showed significant increase during storage at 13$^{\circ}C$ for 180 days, but the accumulation of HMF was accelerated by higher temperature. Capsanthin content decreased more rapidly at higher temperature . L values decreased up to 60 days of storage and the storage temperature had little influence on the rate . But, after 60 days, L value decreased more slowly at 13 than at 27 and 37$^{\circ}C$ , a and b values showed linear decrease at 37$^{\circ}C$, but increase in a and b values at 13 and 27 $^{\circ}C$ during early storage was followed by decrease. ΔE decreased more rapidly at higher temperature . Color-preference and purchasing-intent for kochujang decreased during storage at 27 and 37 $^{\circ}C$, but did not show significant changes during storage at 13 $^{\circ}C$ for 180 days. L, and ΔE values of kochujang stored at 37 and 27Δ showed positive correlation with color-preference, but Hunter tristimulus values of Kochujang stored at 13$^{\circ}C$ did not show not any significant correlation with color preference.

• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.426-430
• /
• 1985

The effects of temperature on the visual color deterioration of Lithospermi radix were investigated under steady conditions of various pH and temperature. The changes of Hunter L, a, b, and ${\Delta}E$ values related to the color deterioration were sharply increased above $50^{\circ}C$ and the deteriorations were expressed linear relationships with the temperature above $60^{\circ}C$. Linear regression coefficients of Hunter L, a, b values decreased with an increase of heat treatment time, whereas the color difference was increased. The linear regression coefficients of Hunter L, a, b, ${\Delta}E$ values in 66.7% ethanol extract solution of Lithospermi radix for 1 hr were -0.3696, -0.4124, -0.2279, and 0.5983, respectively. Inear regression coefficients in color difference (${\Delta}E$) could be calculated from the coefficients in Hunter L, a, b values. The low pH treatment of extract from pH 6.07 to pH 1.35 led to decrease of Hunter a value and a little increase of Hunter L, b values, but the high pH treatment above pH 6.07 decreased all Hunter values. Particularly, the visual color of the extract of Lithospermiradix was appeared to be faborable at pH 4.0-6.5, which was a bright red color.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.8
• /
• pp.875-884
• /
• 2012

Many Koreans have recently bleached their black hair to blond or a light color due to the influence of their favorite Korean idols. Bleaching effects were studied under various bleaching conditions, such as the concentration of oxidants, the ratio between bleach accelerant and oxidant, and treatment temperature and time. The degree of damage of bleached hair with the same color difference (${\Delta}E$) intervals was observed in SEM images, the retention of breaking load and the change of color after dyeing. The ratio between bleach accelerant and oxidant of 1:2.5 was an effective condition. $L^*$ values of the bleached hair treated with 9% oxidant increased to 90 min. At a treatment temperature of $30^{\circ}C$, $a^*$ values were maximum at 30 min and then decreased as time further increased; however, $b^*$ values of the bleached hair increased as the treatment time increased. At $45^{\circ}C$, both of $a^*$ and $b^*$ values showed a maximum at a specific time. Bleaching efficiency was influenced most by temperature, followed in order by time, and oxidant concentration. As the treatment time increased, $L^*$ values greatly increased with twice treatment; however, $a^*$ and $b^*$ values decreased. Bleached hair, which had a color difference of higher than 30, showed the scales were completely removed and the retention of the breaking load greatly decreased. Highly bleached hair showed a great decrease in $L^*$ values by dyeing; however, dyeing with bright colors was more indicative to the effect of bleaching.