• Proceedings of the CALSEC Conference
• /
• 2002.01a
• /
• pp.479-483
• /
• 2002

Research Purpose Present a Reliability Measurement Model for e-biz solutions in J2ee environment Address problems with software reliability of e-biz solutions To remove defects as early as possible in the development process Reduce or eliminate defects from software-improve software quality(omitted)

• The Journal of Dong Guk Oriental Medicine
• /
• v.8 no.2
• /
• pp.175-199
• /
• 2000

Acupuncture and moxibustion play an important role not only in the medical service and health care of Korea, China and japan but also in those of many western countries such as Germany, France, United States of America. An unexpected results induced by careless acupuncture and moxibustion treatments may be mild or severe, and are due to practitioner's mistake and particular body condition of a patient. This study was performed to establish a preventive measures against medical accident induced by acupuncture therapy. Total 23 acupuncture points which are included in a J${\bar{l}}$n-Zh${\dot{e}}$n-Xu${\acute{e}}$-G${\dot{e}}$ were selected as prohibited acupuncture points. Although the records in J${\bar{l}}$n-Zh${\dot{e}}$n-Xu${\acute{e}}$-G${\dot{e}}$ are an important data historically which show dangerous acupuncture points, there are few a full investigation on J${\bar{l}}$n-Zh${\dot{e}}$n-Xu${\acute{e}}$-G${\dot{e}}$ up to the present. So present study was done for literature review to understand a feasibility of the records in J${\bar{l}}$n-Zh${\dot{e}}$n-Xu${\acute{e}}$-G${\dot{e}}$ in association with dangerous acupuncture points. Based upon the locations of these acupuncture points, the dangerous region were classified three categories, head, soma and limb. And abnormal signs related to the improperly performed acupuncture treatment on each point were investigated by using historical reference books on acupuncture and moxibustion. And then names, locations, depth of insertion, operation methods and side effects of each point were investigated.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.282-285
• /
• 2001

In general, the PSS/E program based on RMS mathematical models is used for analyzing the steady state and transient stability phenomena of full-scale large power system. Whereas, the EMTDC program unlike PSS/E, studies the specific reduced small-scale power systems as a basis of instantaneous value mathematical models and used to analyze the Electro-Magnetic transient characteristics. The PSS/E provides various control models such as exciter, governor, PSS models and TGOV5 model but there are few control models in EMTDC. In this paper, we developed EMTDC model for TGOV5 of a steam turbine and boiler which represents governor action, main, reheat and low-pressure effects, including boiler effects. The EMTDC model is developed by examining PSS/E control block and using User Define Model(UDM) in addition to default.lib provided by EMTDC. We verify the correctness of developed TGOV5 model with PSS/E and EMTDC simulation results using Governor Step(GSTEP) method.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.71-74
• /
• 2001

In general, the PSS/E program based on RMS mathematical models is used for analyzing the steady state and transient stability phenomena of full-scale large power system. Whereas, the EMTDC program unlike PSS/E, studies the specific reduced small-scale power systems as a basis of instantaneous value mathematical models and used to analyze the Electro-Magnetic transient characteristics. The PSS/E provides various control models such as exciter, governor and PSS models, But there are few control models in EMTDC. In this paper, we developed EMTDC models for governor which have been applied in KEPCO system. The EMTDC models are developed by examining PSS/E control block and using User Define Model in addition to default.lib provided by EMTDC. we verify the correctness of developed governor models with PSS/E and EMTDC simulation results using Governor Step(GSTEP) method.

• Electrical & Electronic Materials
• /
• v.9 no.7
• /
• pp.708-718
• /
• 1996

The microstructure and electrical properties of the nonlinear ZnO varistor with A1$_{2}$ $O_{3}$ additions is investigated. The variation of nonlinear behavior with A1$_{2}$ $O_{3}$ additions is indicated from J-E and C-V measurement to be a result of the change of the interface defects density $N_{t}$ at the grain boundaries and the donor concentration $N_{d}$ in the ZnO grains. The optimum composition which has the nonlinear coefficients of -57 was observed in the sample with 0.005wt% A1$_{2}$ $O_{3}$ additions. The conduction mechanism at the pre-breakdown region is consistent with a Schottky thermal emission process obeying a relation given by $J^{\var}$exp[-(.psi.-.betha. $E^{1}$2/)kT] and the conduction process at the breakdown region follows a Fowler-Nordheim tunneling mechanism of the form $J^{\var}$exp(-.gamma./E).

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.1
• /
• pp.18-22
• /
• 2022

The effect of electron beam (EB) irradiation on superconducting properties and microstructures of MgB₂ bulk superconductors were investigated. At E-beam doses of 1×10¹⁶ e/cm² and 1×10¹⁷ e/cm², the effect of irradiation on a superconducting transition temperature (T_c) of MgB₂ was weak. As a dose increases to 5×10¹⁷ e/cm², T_c decreases by 0.5 K. The critical current density (J_c) measured at 4.2 K and 20 K, and 0 T - 5 T increases slightly as exposure time increases. X-ray diffraction for the irradiation surface of MgB₂ shows that the diffraction intensity of (hkl) peaks decreases proportionally as the exposure time increases. This indicates that the crystallinity of MgB₂ was degraded by irradiation. TEM investigation for the irradiated sample showed distorted lattice structure, which is consistent with the XRD results. The J_c increase and T_c reduction of MgB₂ by irradiation are believed to be caused by the lattice distortion.

• Journal of Information Display
• /
• v.2 no.3
• /
• pp.48-53
• /
• 2001

Carbon nanotube emitters, prepared by screen printing, have demonstrated a great potential towards low-cost, largearea field emission displays. Carbon nanotube paste, essential to the screen printing technology, was formulated to exhibit low threshold electric fields as well as an emission uniformity over a large area. Two different types of triode structures, normal gate and undergate, have been investigated, leading us to the optimal structure designing. These carbon nanotube FEDs demonstrated color separation and high brightness over 300 $cd/m^2$ at a video-speed operation of moving images. Our recent developments are discussed in details.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.5
• /
• pp.145-145
• /
• 2000

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2001.10a
• /
• pp.59-59
• /
• 2001

• Nuclear industry
• /
• v.16 no.7 s.161
• /
• pp.39-46
• /
• 1996